Consumeables Catalog - Lincoln Electric

Typical Applications
HARDFACING METAL-CORED SUBMERGED ARC (SAW) ELECTRODE
IMPORTANT: SPECIAL VENTILATION AND/OR EXHAUST REQUIRED
Lincore®
Caster rolls Metal-cored wire with moderate hardness
for build-up before stainless overlay
Recommended Flux
Primary Flux
801
Secondary Flux (1)
802, 880
(1) 802 and 860 standard flux are not sized for semiautomatic applications; however, they can be ordered in special sizing by
contacting your Lincoln Electric representative.
Key Features
Good crack resistance and high compressive
strength
20
Roll Rebuilding - Build Up
DIAMETERS / PACKAGING
Diameter 50 lb (22.7 kg)
600 lb (272 kg)
Coil
Speed-Feed ® in (mm)
Drum
3/32 (2.4)
EDS18565
1/8 (3.2)
EDS18566 ED018569
5/32 (4.0)
EDS18570
MECHANICAL PROPERTIES (1)
Rockwell Hardness (R C )
23 - 28
DEPOSIT COMPOSITION (1)
With Recommended Neutral Flux
%C %Mn %Si %Cr %Ni %Mo
0.05 0.60 0.40 1.40 2.40 0.40
TYPICAL OPERATING PROCEDURES
Diameter, Polarity
Wire Feed Speed Voltage Approx. Current Deposition Rate
ESO - in (mm)
m/min (in/min) (Volts)
(Amps)
kg/hr (lb/hr)
3/32 in (2.4 mm), DC+
3/4 (20)
1.7 (65)
3.0 (120)
4.4 (175)
24
28
31
270
400
500
3.0 (6.7)
5.6 (12.4)
8.2 (18.1)
1/8 in (3.2 mm), DC+
3/4 (20)
1.5 (60)
2.5 (100)
3.6 (140)
26
28
30
400
550
680
4.7 (10.4)
7.8 (17.3)
11.0 (24.2)
5/32 in (4.0 mm), DC+
1-1/2 (38)
1.4 (55)
2.2 (85)
2.9 (115)
27
30
32
520
725
880
6.6 (14.6)
10.2 (22.5)
13.8 (30.4)
Fumes from the normal use of some welding products can contain significant quantities of components - such as chromium and manganese - which can lower the 5.0 mg/m 3 maximum exposure guideline for general welding fume.
BEFORE USE, READ AND UNDERSTAND THE MATERIAL SAFETY DATA SHEET (MSDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER.
(1) Composition and properties depend upon dilution. Single layer deposit properties depend upon base metal and/or build-up material.
WELDING CONSUMABLES CATALOG ı 265