Consumeables Catalog - Lincoln Electric

More documents

Recommendations

Info

STICK (SMAW) ELECTRODE Fleetweld ® Key Features Deep penetration Typical Applications Spot welding floor decking to beams 22 Mild Steel, Rutile • AWS E6022 Optimized for burn-through spot welding Little slag interference in arc Steel with moderate surface contaminants (1) Typical all weld metal. (2) Measured with 0.2% offset. (3) See test results disclaimer on pg. 16. (4) Preferred polarity is listed first. 24 ı THE LINCOLN ELECTRIC COMPANY Conformances AWS A5.1/A5.1M: 2004 ASME SFA-A5.1: Welding Positions Flat & Horizontal DIAMETERS / PACKAGING Diameter Length 50 lb (22.7 kg) in (mm) in (mm) Carton 1/8 (3.2) 5/32 (4.0) 14 (350) 14 (350) ED021896 ED021895 E6022 E6022 MECHANICAL PROPERTIES (1) – As Required per AWS A5.1/A5.1M: 2004 Tensile Strength Longitudinal Bend MPa (ksi) Test Requirements - AWS E6022 430 (60) min. Required Typical Results (3) - As-Welded 415-565 (60-82) Pass TYPICAL OPERATING PROCEDURES Current (Amps) Polarity (4) 1/8 in (3.2 mm) 5/32 in (4.0 mm) DC- 110-150 150-180 AC 110-150 150-180
Conformances Key Features AWS A5.1/A5.1M: 2004 ASME SFA-A5.1: ABS: Lloyd’s Register: DNV Grade: GL: BV Grade: CWB: Welding Positions All E7014 E7014 E7014 1M 1 1 1 E4914 DIAMETERS / PACKAGING Diameter Length 1 lb (0.5 kg) Plastic Tube in (mm) in (mm) 6 lb (2.7 kg) Master Carton 3/32 1/8 5/32 3/16 (2.4) (3.2) (4.0) (4.8) 14 (350) 14 (350) 14 (350) 14 (350) ED033504 ED033505 NOTE: Retail Small Packaging (RSP). All RSP products carry AWS compliance. Unlike the standard products, RSP products have no other agencies approvals. STICK (SMAW) ELECTRODE Fleetweld ® High deposition rates Excellent operator appeal Easy to use Operates on low amperages Typical Applications Maintenance and repair welding Sheet metal and fillet welds Heavy sections 5 lb (2.3 kg) Plastic Tube 20 lb (9.1 kg) Master Carton* ED033506 ED033507 ED033508 50 lb (22.7kg) Carton ED010189 ED010183 ED010193 ED010186 47 AWS E7014 • Mild Steel, Rutile MECHANICAL PROPERTIES (1) – As Required per AWS A5.1/A5.1M: 2004 Yield Strength (2) Tensile Strength Elongation Charpy V-Notch J (ft•lbf) MPa (ksi) MPa (ksi) % @ -29°C (-20°F) Requirements - AWS E7014 400 (58) min. 490 (70) min. 17 min. Not Specified Typical Results (3) - As-Welded 400-510 (58-74) 490-585 (70-85) 23-29 45-103 (33-76) DEPOSIT COMPOSITION (1) – As Required per AWS A5.1/A5.1M: 2004 %C %Mn %Si %P %S Requirements - AWS E7014 0.15 max. 1.25 max. 0.90 max. 0.035 max. 0.035 max. Typical Results (3) - As-Welded 0.06-0.10 0.25-0.67 0.04-0.69 0.01-0.02 ≤ 0.02 %Ni %Cr %Mo %V %Mn + Ni + Cr + Mo + V Requirements - AWS E7014 0.30 max. 0.20 max. 0.30 max. 0.08 max. 1.50 max. Typical Results (3) - As-Welded 0.02-0.09 0.01-0.05 ≤ 0.02 ≤ 0.02 0.37 TYPICAL OPERATING PROCEDURES Current (Amps) Polarity (4) 3/32 in (2.4 mm) 1/8 in (3.2 mm) 5/32 in (4.0 mm) 3/16 in (4.8 mm) AC 80-100 110-155 150-225 200-285 DC± 75-95 100-145 135-200 185-235 (1) Typical all weld metal. (2) Measured with 0.2% offset. (3) See test results disclaimer on pg. 16. (4) Preferred polarity is listed first. WELDING CONSUMABLES CATALOG ı 25
Page 1 and 2: C1.10 www.lincolnelectric.com Weldi
Page 3: GAS-SHIELDED FLUX-CORED (FCAW-G) WI
Page 6 and 7: Detailed Table of Contents Stick St
Page 8 and 9: Detailed Table of Contents Submerge
Page 10 and 11: Detailed Table of Contents Aluminum
Page 12 and 13: Catalog User Guide 4 7 8 9 10 11 12
Page 14 and 15: INTRODUCTION 12 ı THE LINCOLN ELEC
Page 16 and 17: INTRODUCTION Q Lot Certifications C
Page 18 and 19: INTRODUCTION Disclaimers 16 ı THE
Page 20 and 21: STICK (SMAW) ELECTRODE Fleetweld ®
Page 28 and 29: STICK (SMAW) ELECTRODE Jetweld ® H
Page 30 and 31: STICK (SMAW) ELECTRODE Excalibur ®
Page 32 and 33: STICK (SMAW) ELECTRODE Jet-LH ® Lo
Page 36 and 37: STICK (SMAW) ELECTRODE Shield-Arc®
Page 38 and 39: STICK (SMAW) ELECTRODE Shield-Arc®
Page 48 and 49: STICK (SMAW) ELECTRODE Notes 46 ı
Page 50 and 51: MIG (GMAW) WIRE SuperGlide® Typica
Page 52 and 53: MIG (GMAW) WIRE SuperGlide® Typica
Page 54 and 55: MIG (GMAW) WIRE SuperArc® Typical
Page 64 and 65: MIG (GMAW) WIRE SuperArc® Capable
Page 66 and 67: TIG (GTAW) CUT LENGTHS Lincoln® Ty
Page 68 and 69: MIG (GMAW) & TIG (GTAW) CONSUMABLES
Page 70 and 71: METAL-CORED WIRE Metalshield ® Mil
Page 72 and 73: Structural Welding Code Seismic Sup
Page 74 and 75: METAL-CORED WIRE Metalshield ® Mil
Page 76 and 77:
METAL-CORED WIRE Metalshield ® Low
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
METAL-CORED CONSUMABLES Notes 80 ı
Page 84 and 85:
FLUX-CORED SELF-SHIELDED (FCAW-S) W
Page 86 and 87:
Structural Welding Code Seismic Sup
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
FLUX-CORED GAS-SHIELDED (FCAW-G) WI
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
SUBMERGED ARC (SAW) FLUX Lincolnwel
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Lincolnweld ® Features the chemica
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
SUBMERGED ARC (SAW) ELECTRODE Linco
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
SUBMERGED ARC (SAW) CONSUMABLES Not
Page 196 and 197:
STICK (SMAW) ELECTRODE Excalibur®
Page 198 and 199:
STICK (SMAW) ELECTRODE Excalibur ®
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
MIG (GMAW) WIRE Blue Max® Stainles
Page 208 and 209:
Page 210 and 211:
MIG (GMAW) WIRE Blue Max ® Stainle
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
TIG (GTAW) CUT LENGTHS Lincoln® St
Page 234 and 235:
TIG (GTAW) CUT LENGTHS Lincoln® St
Page 236 and 237:
METAL-CORED (GMAW-C) WIRE Outershie
Page 238 and 239:
HARDFACING STICK (SMAW) ELECTRODE W
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
HARDFACING METAL-CORED GAS-SHIELDED
Page 250 and 251:
HARDFACING METAL-CORED (GMAW-C) WIR
Page 252 and 253:
HARDFACING FLUX-CORED SELF-SHIELDED
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
HARDFACING METAL-CORED SUBMERGED AR
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
HARDFACING SUBMERGED ARC (SAW) FLUX
Page 280 and 281:
HARDFACING SUBMERGED ARC (SAW) FLUX
Page 282 and 283:
MIG (GMAW) WIRE SuperGlaze Aluminum
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
SuperGlaze ® MIG (GMAW) WIRE Alumi
Page 290 and 291:
TIG (GTAW) CUT LENGTHS SuperGlaze A
Page 292 and 293:
ALUMINUM & CAST IRON CONSUMABLES No
Page 294 and 295:
PIPELINER ® STICK (SMAW) ELECTRODE
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Pipeliner® Welding Positions All P
Page 306 and 307:
PIPELINER ® FLUX-CORED SELF-SHIELD
Page 308 and 309:
PIPELINER ® FLUX-CORED GAS-SHIELDE
Page 310 and 311:
PIPELINER ® FLUX-CORED GAS-SHIELDE
Page 312 and 313:
PIPELINER ® CONSUMABLES Electrode
Page 314 and 315:
PIPELINER ® CONSUMABLES Electrode
Page 316 and 317:
PIPELINER ® CONSUMABLES EN and ISO
Page 318 and 319:
Agency Approvals NOTE: Approvals ar
Page 320 and 321:
PIPELINER ® CONSUMABLES Notes 318
Page 322 and 323:
Power Generation & Nuclear Lincoln
Page 324 and 325:
BATCH | STICK (SMAW) ELECTRODE Exca
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
BATCH | MIG (GMAW) WIRE SuperArc®
Page 332 and 333:
BATCH | MIG (GMAW) WIRE SuperArc®
Page 334 and 335:
BATCH | MIG (GMAW) WIRE Blue Max®
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Page 342 and 343:
TIG (GTAW) CUT LENGTHS Lincoln® Lo
Page 344 and 345:
BATCH | TIG (GTAW) CUT LENGTHS Linc
Page 346 and 347:
BATCH | ORBITAL TIG (GTAW) WIRE Sup
Page 348 and 349:
BATCH | FLUX-CORED GAS-SHIELDED (FC
Page 350 and 351:
Page 352 and 353:
SUBMERGED ARC (SAW) FLUX AND WIRE C
Page 354 and 355:
SUBMERGED ARC (SAW) WIRE AND FLUX L
Page 356 and 357:
SUBMERGED ARC (SAW) WIRE AND FLUX L
Page 358 and 359:
PACKAGING Tubes, Cans & Cartons 5 l
Page 360 and 361:
PACKAGING Reels & Stem REELS Wire T
Page 362 and 363:
PACKAGING Spools A SPOOLS Wire Type
Page 364 and 365:
PACKAGING Coils, Boxes & Bags COILS
Page 366 and 367:
PACKAGING Drums & Pails DRUMS Wire
Page 368 and 369:
PACKAGING Storage & Handling Stick
Page 370 and 371:
PACKAGING Storage & Handling Metal-
Page 372 and 373:
PACKAGING Storage & Handling Submer
Page 374 and 375:
APPENDIX AWS Classification System
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
Page 382 and 383:
APPENDIX Stick Electrode Types of C
Page 384 and 385:
APPENDIX Submerged Arc Fluxes Flux
Page 386 and 387:
APPENDIX Submerged Arc Flux/Wire Se
Page 388 and 389:
APPENDIX Aluminum Typical Operating
Page 390 and 391:
APPENDIX Aluminum Typical Joint Des
Page 392 and 393:
APPENDIX Innershield® Wire Selecti
Page 394 and 395:
APPENDIX Agency Approvals NOTE: App
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
APPENDIX Safety Guidelines Diesel e
Page 408 and 409:
APPENDIX Safety Guidelines ARC RAYS
Page 410 and 411:
APPENDIX Safety Guidelines CYLINDER
Page 412 and 413:
APPENDIX Safety Guidelines The gase
Page 414 and 415:
APPENDIX Notes
Page 416:
THE LINCOLN ELECTRIC COMPANY 22801
show all

Consumeables Catalog - Lincoln Electric

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?