Consumeables Catalog - Lincoln Electric
Consumeables Catalog - Lincoln Electric Consumeables Catalog - Lincoln Electric
MIG (GMAW) WIRE Blue Max® Stainless • Similar to AWS ER307 Designed for joining dissimilar steels 7% Mn increases resistance to hot cracking Q2 Lot ® Key Features - Certificate showing actual wire composition and calculated ferrite number (FN) available online Welding Positions All WIRE COMPOSITION (1) – As Required per AWS Similar to AWS A5.9/A5.9M: 2006 210 ı THE LINCOLN ELECTRIC COMPANY %C %Cr %Ni %Mo %Mn Requirements - AWS ER307 (4) 0.04-0.14 19.5-22.0 8.0-10.7 0.5-1.5 3.3-4.75 Test Results (3) 0.08 19.2 9.0 0.3 7.1 %Si %P %S %Cu Requirements - AWS ER307 (4) 0.30-0.65 0.03 0.03 0.75 Test Results (3) 0.80 0.03 0.03 0.30 (1) Typical all weld metal. (2) Measured with 0.2% offset. (3) See test results disclaimer on pg. 16. (4) Nearest classification. LNM 307 Typical Applications Armor plate Non-magnetic austenitic steel DIAMETERS / PACKAGING Diameter 33 lb (15 kg) mm (in) Steel Spool 1.2 (0.045) ED031326 Conformances Similar to AWS A5.9/A5.9M: 2006 EN ISO 14343-A: Shielding Gas 95% Argon / Balance CO2 Hardenable steel Work hardening manganese steel ER307 G 18 8 Mn MECHANICAL PROPERTIES (1) – As Required per AWS Similar to AWS A5.9/A5.9M: 2006 Yield Strength (2) MPa (ksi) Tensile Strength MPa (ksi) Elongation % Charpy V-Notch J (ft•lbf) @ 20°C (68°F) @ -120°C (-184°F) Requirements - AWS ER307 (4) Not Specified Test Results (3) - As-Welded 400 (58) 630 (91) 40 80 (59) 50 (37) IMPORTANT: SPECIAL VENTILATION AND/OR EXHAUST REQUIRED Fumes from the normal use of some welding products can contain significant quantities of components - such as chromium and manganese - which can lower the 5.0 mg/m3 maximum exposure guideline for general welding fume. BEFORE USE, READ AND UNDERSTAND THE MATERIAL SAFETY DATA SHEET (MSDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER.
Typical Applications AISI 321, 321H, 347, 347H CR-8C UNS S32100, S32109, S34700, S34709, J92710 Conformances AWS A5.9/A5.9M:2006 EN ISO 14343-A: Shielding Gas 95% Argon / Balance CO2 97% Argon / Balance O2 ER347Si G 19 9 NbSi Blue Max® DIAMETERS / PACKAGING Diameter 33 lb (15 kg) mm (in) Steel Spool 1.2 (0.045) ED031352 WIRE COMPOSITION (1) – As Required per AWS A5.9/A5.9M: 2006 %C %Cr %Ni %Mo %Mn Requirements - AWS ER347Si 0.08 max. 19.0-21.5 9.0-11.0 0.75 max. 1.0-2.5 Test Results (3) 0.04 19.2 9.9 0.3 1.3 %Si %P %S %Cu Nb (4) Requirements - AWS ER347Si 0.65-1.00 0.03max. 0.03max. 0.75max. 10 X C min. / 1.0 max. Test Results (3) 0.90 0.03 0.02 0.30 0.6 IMPORTANT: SPECIAL VENTILATION AND/OR EXHAUST REQUIRED Fumes from the normal use of some welding products can contain significant quantities of components - such as chromium and manganese - which can lower the 5.0 mg/m 3 maximum exposure guideline for general welding fume. BEFORE USE, READ AND UNDERSTAND THE MATERIAL SAFETY DATA SHEET (MSDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. (1) Typical all weld metal. (2) Measured with 0.2% offset. (3) See test results disclaimer on pg. 16. (4) Included in 0.50% max. for other elements not specified. Key Features Welding Positions All MIG (GMAW) WIRE LNM 347Si AWS ER347Si • Stainless Designed for joining Ti or Nb (Cb) stabilized CrNi steels Excellent resistance to intergranular corrosion and oxidizing environments Q2 Lot ® - Certificate showing actual wire composition and calculated ferrite number (FN) available online MECHANICAL PROPERTIES (1) – As Required per AWS A5.9/A5.9M: 2006 Yield Strength (2) MPa (ksi) Tensile Strength MPa (ksi) Elongation % Charpy V-Notch J (ft•lbf) @ 20°C (68°F) Requirements - AWS ER347Si Not Specified Test Results (3) - As-Welded 460 (68) 650 (94) 35 100 (74) WELDING CONSUMABLES CATALOG ı 211
- Page 162 and 163: SUBMERGED ARC (SAW) FLUX Lincolnwel
- Page 164 and 165: SUBMERGED ARC (SAW) FLUX Lincolnwel
- Page 166 and 167: SUBMERGED ARC (SAW) FLUX Lincolnwel
- Page 168 and 169: SUBMERGED ARC (SAW) FLUX Lincolnwel
- Page 170 and 171: SUBMERGED ARC (SAW) FLUX Lincolnwel
- Page 172 and 173: SUBMERGED ARC (SAW) FLUX Lincolnwel
- Page 174 and 175: SUBMERGED ARC (SAW) FLUX Lincolnwel
- Page 176 and 177: Lincolnweld ® Features the chemica
- Page 178 and 179: SUBMERGED ARC (SAW) FLUX Lincolnwel
- Page 180 and 181: SUBMERGED ARC (SAW) FLUX Lincolnwel
- Page 182 and 183: SUBMERGED ARC (SAW) ELECTRODE Linco
- Page 184 and 185: SUBMERGED ARC (SAW) ELECTRODE Linco
- Page 186 and 187: SUBMERGED ARC (SAW) ELECTRODE Linco
- Page 188 and 189: SUBMERGED ARC (SAW) ELECTRODE Linco
- Page 190 and 191: SUBMERGED ARC (SAW) ELECTRODE Linco
- Page 192 and 193: SUBMERGED ARC (SAW) ELECTRODE Linco
- Page 194 and 195: SUBMERGED ARC (SAW) CONSUMABLES Not
- Page 196 and 197: STICK (SMAW) ELECTRODE Excalibur®
- Page 198 and 199: STICK (SMAW) ELECTRODE Excalibur ®
- Page 200 and 201: STICK (SMAW) ELECTRODE Excalibur ®
- Page 202 and 203: STICK (SMAW) ELECTRODE Excalibur ®
- Page 204 and 205: STICK (SMAW) ELECTRODE Excalibur ®
- Page 206 and 207: MIG (GMAW) WIRE Blue Max® Stainles
- Page 208 and 209: MIG (GMAW) WIRE Blue Max® Stainles
- Page 210 and 211: MIG (GMAW) WIRE Blue Max ® Stainle
- Page 214 and 215: MIG (GMAW) WIRE Blue Max® Stainles
- Page 216 and 217: FLUX-CORED GAS-SHIELDED (FCAW-G) WI
- Page 218 and 219: FLUX-CORED GAS-SHIELDED (FCAW-G) WI
- Page 220 and 221: FLUX-CORED GAS-SHIELDED (FCAW-G) WI
- Page 222 and 223: FLUX-CORED GAS-SHIELDED (FCAW-G) WI
- Page 224 and 225: FLUX-CORED GAS-SHIELDED (FCAW-G) WI
- Page 226 and 227: SUBMERGED ARC (SAW) ELECTRODE Linco
- Page 228 and 229: SUBMERGED ARC (SAW) ELECTRODE Linco
- Page 230 and 231: SUBMERGED ARC (SAW) FLUX Lincolnwel
- Page 232 and 233: TIG (GTAW) CUT LENGTHS Lincoln® St
- Page 234 and 235: TIG (GTAW) CUT LENGTHS Lincoln® St
- Page 236 and 237: METAL-CORED (GMAW-C) WIRE Outershie
- Page 238 and 239: HARDFACING STICK (SMAW) ELECTRODE W
- Page 240 and 241: HARDFACING STICK (SMAW) ELECTRODE W
- Page 242 and 243: HARDFACING STICK (SMAW) ELECTRODE W
- Page 244 and 245: HARDFACING STICK (SMAW) ELECTRODE W
- Page 246 and 247: HARDFACING STICK (SMAW) ELECTRODE W
- Page 248 and 249: HARDFACING METAL-CORED GAS-SHIELDED
- Page 250 and 251: HARDFACING METAL-CORED (GMAW-C) WIR
- Page 252 and 253: HARDFACING FLUX-CORED SELF-SHIELDED
- Page 254 and 255: HARDFACING FLUX-CORED SELF-SHIELDED
- Page 256 and 257: HARDFACING FLUX-CORED SELF-SHIELDED
- Page 258 and 259: HARDFACING FLUX-CORED SELF-SHIELDED
- Page 260 and 261: HARDFACING FLUX-CORED SELF-SHIELDED
MIG (GMAW) WIRE<br />
Blue Max®<br />
Stainless • Similar to AWS ER307<br />
Designed for joining dissimilar steels<br />
7% Mn increases resistance to hot cracking<br />
Q2 Lot ® Key Features<br />
- Certificate showing actual wire<br />
composition and calculated ferrite number<br />
(FN) available online<br />
Welding Positions<br />
All<br />
WIRE COMPOSITION (1) – As Required per AWS Similar to AWS A5.9/A5.9M: 2006<br />
210 ı THE LINCOLN ELECTRIC COMPANY<br />
%C %Cr %Ni %Mo %Mn<br />
Requirements - AWS ER307 (4) 0.04-0.14 19.5-22.0 8.0-10.7 0.5-1.5 3.3-4.75<br />
Test Results (3) 0.08 19.2 9.0 0.3 7.1<br />
%Si %P %S %Cu<br />
Requirements - AWS ER307 (4) 0.30-0.65 0.03 0.03 0.75<br />
Test Results (3) 0.80 0.03 0.03 0.30<br />
(1) Typical all weld metal. (2) Measured with 0.2% offset. (3) See test results disclaimer on pg. 16. (4) Nearest classification.<br />
LNM 307<br />
Typical Applications<br />
Armor plate<br />
Non-magnetic<br />
austenitic steel<br />
DIAMETERS / PACKAGING<br />
Diameter 33 lb (15 kg)<br />
mm (in)<br />
Steel Spool<br />
1.2 (0.045) ED031326<br />
Conformances<br />
Similar to<br />
AWS A5.9/A5.9M: 2006<br />
EN ISO 14343-A:<br />
Shielding Gas<br />
95% Argon / Balance CO2 Hardenable steel<br />
Work hardening<br />
manganese steel<br />
ER307<br />
G 18 8 Mn<br />
MECHANICAL PROPERTIES (1) – As Required per AWS Similar to AWS A5.9/A5.9M: 2006<br />
Yield Strength (2)<br />
MPa (ksi)<br />
Tensile Strength<br />
MPa (ksi)<br />
Elongation<br />
%<br />
Charpy V-Notch<br />
J (ft•lbf)<br />
@ 20°C (68°F) @ -120°C (-184°F)<br />
Requirements - AWS ER307 (4) Not Specified<br />
Test Results (3) - As-Welded 400 (58) 630 (91) 40 80 (59) 50 (37)<br />
IMPORTANT: SPECIAL VENTILATION AND/OR EXHAUST REQUIRED<br />
Fumes from the normal use of some welding products can contain significant quantities of components - such as chromium and manganese - which can lower the 5.0 mg/m3 maximum exposure guideline for general welding fume.<br />
BEFORE USE, READ AND UNDERSTAND THE MATERIAL SAFETY DATA SHEET (MSDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER.