Consumeables Catalog - Lincoln Electric

More documents

Recommendations

Info

MIG (GMAW) WIRE Blue Max ® Stainless • AWS ER316Si, ER316LSi Key Features High silicon level for increased puddle fluidity and toe wetting Proprietary surface lubricant for steady feeding and arc stability Molybdenum grade for increased corrosion resistance Q2 Lot ® - Certificate showing actual wire composition and calculated ferrite number (FN) available online Controlled ferrite content for maximum corrosion resistance Typical Applications Molybdenum bearing austenitic stainless steels Type 316 and 316L DIAMETERS / PACKAGING Diameter 25 lb (11.3 kg) in (mm) Plastic Spool 0.030 (0.8) ED023963 0.035 (0.9) ED019298 0.045 (1.1) ED019299 1/16 (1.6) ED019300 208 ı THE LINCOLN ELECTRIC COMPANY MIG 316LSi Conformances AWS A5.9/A5.9M: 2006 ASME SFA-A5.9: ABS: CWB/CSA W48-06: EN ISO 14343-B: Welding Positions All ER316Si, ER316LSi ER316Si, ER316LSi ER316Si, ER316LSi ER316LSi SS316LSi Shielding Gas Short Circuiting Transfer: 90% Helium / 7-1/2% Argon / 2-1/2% CO2 Axial Spray Transfer: 98% Argon / Balance Oxygen MECHANICAL PROPERTIES (1) – As Required per AWS A5.9/A5.9M: 2006 Yield Strength (2) MPa (ksi) Tensile Strength MPa (ksi) 500 lb (227 kg) Accu-Trak ® Drum ED029772 ED029773 Elongation % Ferrite Number Requirements - AWS ER316Si, ER316LSi Not Specified Test Results (3) - As-Welded 405 (59) 560 (81) 40 10
TYPICAL OPERATING PROCEDURES Diameter, Polarity Shielding Gas Short Circuit Transfer 0.035 in (0.9 mm), DC+ 90% He / 7-1/2% Ar / 2-1/2% CO 2 0.045 in (1.1 mm), DC+ 90% He / 7-1/2% Ar / 2-1/2% CO 2 Axial Spray Transfer 0.035 in (0.9 mm), DC+ 98% Ar/2% O 2 0.045 in (1.1 mm), DC+ 98% Ar/2% O 2 Blue Max ® (1) Typical all weld metal. (2) See test results disclaimer on pg. 16. (3) AWS Requirement for ER309Si is 0.12% max. carbon. (4) Included in 0.50% max. for other elements not specified. (5) To estimate ESO, subtract 1/8 in (3 mm) from CTWD. MIG (GMAW) WIRE MIG 316LSi (AWS ER316Si, ER316LSi) WIRE COMPOSITION (1) – As Required per AWS A5.9/A5.9M: 2006 %C (3) %Cr %Ni %Mo %Mn Requirements - AWS ER316LSi 0.03 max. 18.0-20.0 11.0-14.0 2.0-3.0 1.0-2.5 Test Results (3) 0.02 18.9 11.8 2.2 2.1 1/16 in (1.6 mm), DC+ 98% Ar/2% O 2 CTWD (5) Wire Feed Speed Voltage Approx. Current Deposition Rate mm (in) m/min (in/min) (Volts) (Amps) kg/hr (lb/hr) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 19 (3/4) 19 (3/4) 19 (3/4) 19 (3/4) 19 (3/4) %Si %P %S %N (4) %Cu Requirements - AWS ER316LSi 0.65-1.00 0.03 max. 0.03 max. Not Specified 0.75 max. Test Results (3) 0.81 0.02 0.01 0.05 0.23 3.0 (120) 4.6 (180) 5.8 (230) 7.6 (300) 8.9 (350) 10.2 (400) 2.5 (100) 3.2 (125) 3.8 (150) 4.4 (175) 5.6 (220) 6.4 (250) 7.0 (275) 10.2 (400) 10.8 (425) 11.4 (450) 12.1 (475) 6.1 (240) 6.6 (260) 7.6 (300) 8.3 (325) 9.1 (360) 4.4 (175) 5.1 (200) 6.4 (250) 7.0 (275) 7.6 (300) 19-20 19-20 20-21 20-21 21-22 22-23 19-20 19-20 21 21 22 22-23 22-23 22 23 23 23 23 24 24 25 25 25 26 26 27 28 55 85 105 125 140 160 100 120 135 140 170 175 185 180 190 200 210 195 230 240 250 260 260 310 330 360 390 0.9 (2.0) 1.4 (3.0) 1.8 (3.9) 2.3 (5.0) 2.7 (5.9) 3.1 (6.7) 1.1 (2.8) 1.5 (3.5) 1.7 (4.2) 2.0 (4.8) 2.6 (6.1) 2.9 (6.9) 3.2 (7.6) 3.1 (6.7) 3.3 (7.1) 3.5 (7.5) 3.7 (8.0) 2.8 (6.6) 3.0 (7.2) 3.5 (8.3) 3.8 (9.0) 4.2 (10.0) 4.3 (9.2) 4.9 (10.5) 6.2 (13.1) 6.8 (14.4) 7.4 (15.8) IMPORTANT: SPECIAL VENTILATION AND/OR EXHAUST REQUIRED Fumes from the normal use of some welding products can contain significant quantities of components - such as chromium and manganese - which can lower the 5.0 mg/m3 maximum exposure guideline for general welding fume. BEFORE USE, READ AND UNDERSTAND THE MATERIAL SAFETY DATA SHEET (MSDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. WELDING CONSUMABLES CATALOG ı 209
Page 1 and 2:
C1.10 www.lincolnelectric.com Weldi
Page 3:
GAS-SHIELDED FLUX-CORED (FCAW-G) WI
Page 6 and 7:
Detailed Table of Contents Stick St
Page 8 and 9:
Detailed Table of Contents Submerge
Page 10 and 11:
Detailed Table of Contents Aluminum
Page 12 and 13:
Catalog User Guide 4 7 8 9 10 11 12
Page 14 and 15:
INTRODUCTION 12 ı THE LINCOLN ELEC
Page 16 and 17:
INTRODUCTION Q Lot Certifications C
Page 18 and 19:
INTRODUCTION Disclaimers 16 ı THE
Page 20 and 21:
STICK (SMAW) ELECTRODE Fleetweld ®
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
STICK (SMAW) ELECTRODE Jetweld ® H
Page 30 and 31:
STICK (SMAW) ELECTRODE Excalibur ®
Page 32 and 33:
STICK (SMAW) ELECTRODE Jet-LH ® Lo
Page 34 and 35:
Page 36 and 37:
STICK (SMAW) ELECTRODE Shield-Arc®
Page 38 and 39:
STICK (SMAW) ELECTRODE Shield-Arc®
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
STICK (SMAW) ELECTRODE Notes 46 ı
Page 50 and 51:
MIG (GMAW) WIRE SuperGlide® Typica
Page 52 and 53:
MIG (GMAW) WIRE SuperGlide® Typica
Page 54 and 55:
MIG (GMAW) WIRE SuperArc® Typical
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
MIG (GMAW) WIRE SuperArc® Capable
Page 66 and 67:
TIG (GTAW) CUT LENGTHS Lincoln® Ty
Page 68 and 69:
MIG (GMAW) & TIG (GTAW) CONSUMABLES
Page 70 and 71:
METAL-CORED WIRE Metalshield ® Mil
Page 72 and 73:
Structural Welding Code Seismic Sup
Page 74 and 75:
METAL-CORED WIRE Metalshield ® Mil
Page 76 and 77:
METAL-CORED WIRE Metalshield ® Low
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
METAL-CORED CONSUMABLES Notes 80 ı
Page 84 and 85:
FLUX-CORED SELF-SHIELDED (FCAW-S) W
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
FLUX-CORED GAS-SHIELDED (FCAW-G) WI
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161: SUBMERGED ARC (SAW) FLUX Lincolnwel
Page 176 and 177: Lincolnweld ® Features the chemica
Page 182 and 183: SUBMERGED ARC (SAW) ELECTRODE Linco
Page 194 and 195: SUBMERGED ARC (SAW) CONSUMABLES Not
Page 196 and 197: STICK (SMAW) ELECTRODE Excalibur®
Page 198 and 199: STICK (SMAW) ELECTRODE Excalibur ®
Page 206 and 207: MIG (GMAW) WIRE Blue Max® Stainles
Page 216 and 217: FLUX-CORED GAS-SHIELDED (FCAW-G) WI
Page 232 and 233: TIG (GTAW) CUT LENGTHS Lincoln® St
Page 234 and 235: TIG (GTAW) CUT LENGTHS Lincoln® St
Page 236 and 237: METAL-CORED (GMAW-C) WIRE Outershie
Page 238 and 239: HARDFACING STICK (SMAW) ELECTRODE W
Page 248 and 249: HARDFACING METAL-CORED GAS-SHIELDED
Page 250 and 251: HARDFACING METAL-CORED (GMAW-C) WIR
Page 252 and 253: HARDFACING FLUX-CORED SELF-SHIELDED
Page 260 and 261:
HARDFACING FLUX-CORED SELF-SHIELDED
Page 262 and 263:
HARDFACING METAL-CORED SUBMERGED AR
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
HARDFACING SUBMERGED ARC (SAW) FLUX
Page 280 and 281:
HARDFACING SUBMERGED ARC (SAW) FLUX
Page 282 and 283:
MIG (GMAW) WIRE SuperGlaze Aluminum
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
SuperGlaze ® MIG (GMAW) WIRE Alumi
Page 290 and 291:
TIG (GTAW) CUT LENGTHS SuperGlaze A
Page 292 and 293:
ALUMINUM & CAST IRON CONSUMABLES No
Page 294 and 295:
PIPELINER ® STICK (SMAW) ELECTRODE
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Pipeliner® Welding Positions All P
Page 306 and 307:
PIPELINER ® FLUX-CORED SELF-SHIELD
Page 308 and 309:
PIPELINER ® FLUX-CORED GAS-SHIELDE
Page 310 and 311:
PIPELINER ® FLUX-CORED GAS-SHIELDE
Page 312 and 313:
PIPELINER ® CONSUMABLES Electrode
Page 314 and 315:
PIPELINER ® CONSUMABLES Electrode
Page 316 and 317:
PIPELINER ® CONSUMABLES EN and ISO
Page 318 and 319:
Agency Approvals NOTE: Approvals ar
Page 320 and 321:
PIPELINER ® CONSUMABLES Notes 318
Page 322 and 323:
Power Generation & Nuclear Lincoln
Page 324 and 325:
BATCH | STICK (SMAW) ELECTRODE Exca
Page 326 and 327:
STICK (SMAW) ELECTRODE Excalibur®
Page 328 and 329:
STICK (SMAW) ELECTRODE Excalibur®
Page 330 and 331:
BATCH | MIG (GMAW) WIRE SuperArc®
Page 332 and 333:
BATCH | MIG (GMAW) WIRE SuperArc®
Page 334 and 335:
BATCH | MIG (GMAW) WIRE Blue Max®
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Page 342 and 343:
TIG (GTAW) CUT LENGTHS Lincoln® Lo
Page 344 and 345:
BATCH | TIG (GTAW) CUT LENGTHS Linc
Page 346 and 347:
BATCH | ORBITAL TIG (GTAW) WIRE Sup
Page 348 and 349:
BATCH | FLUX-CORED GAS-SHIELDED (FC
Page 350 and 351:
Page 352 and 353:
SUBMERGED ARC (SAW) FLUX AND WIRE C
Page 354 and 355:
SUBMERGED ARC (SAW) WIRE AND FLUX L
Page 356 and 357:
SUBMERGED ARC (SAW) WIRE AND FLUX L
Page 358 and 359:
PACKAGING Tubes, Cans & Cartons 5 l
Page 360 and 361:
PACKAGING Reels & Stem REELS Wire T
Page 362 and 363:
PACKAGING Spools A SPOOLS Wire Type
Page 364 and 365:
PACKAGING Coils, Boxes & Bags COILS
Page 366 and 367:
PACKAGING Drums & Pails DRUMS Wire
Page 368 and 369:
PACKAGING Storage & Handling Stick
Page 370 and 371:
PACKAGING Storage & Handling Metal-
Page 372 and 373:
PACKAGING Storage & Handling Submer
Page 374 and 375:
APPENDIX AWS Classification System
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
Page 382 and 383:
APPENDIX Stick Electrode Types of C
Page 384 and 385:
APPENDIX Submerged Arc Fluxes Flux
Page 386 and 387:
APPENDIX Submerged Arc Flux/Wire Se
Page 388 and 389:
APPENDIX Aluminum Typical Operating
Page 390 and 391:
APPENDIX Aluminum Typical Joint Des
Page 392 and 393:
APPENDIX Innershield® Wire Selecti
Page 394 and 395:
APPENDIX Agency Approvals NOTE: App
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
APPENDIX Safety Guidelines Diesel e
Page 408 and 409:
APPENDIX Safety Guidelines ARC RAYS
Page 410 and 411:
APPENDIX Safety Guidelines CYLINDER
Page 412 and 413:
APPENDIX Safety Guidelines The gase
Page 414 and 415:
APPENDIX Notes
Page 416:
THE LINCOLN ELECTRIC COMPANY 22801
show all

Consumeables Catalog - Lincoln Electric

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?