Consumeables Catalog - Lincoln Electric

FLUX-CORED GAS-SHIELDED (FCAW-G) WIRE
Outershield ®
Dual classified for both 100% CO 2 and 75%
Argon / 25% CO 2 mixed gas
Charpy V-Notch impact toughness tested to
-40°C (-40°F)
High travel speeds
Spray like transfer with minimal spatter
Rod based manufacturing for industry leading
wire stiffness and feedability
Increased rigidity allows for easy manual break-off
Typical Applications
Bridge, ship, & barge
General fabrication
Machinery fabrication
Welding Positions
All, except vertical down
Structural fabrication
Offshore applications
132 ı THE LINCOLN ELECTRIC COMPANY
71M
Mild Steel, All Position • AWS E71T-1C-J, E71T-9C-J, E71T-1M-J, E71T-9M-J
Key Features
DIAMETERS / PACKAGING
Diameter 10 lb (4.5 kg)
in (mm) Plastic Spool
0.035 (0.9)
ED026804
0.045 (1.1)
0.052 (1.3)
1/16 (1.6)
ED020836
Diameter 300 lb (136 kg)
Speed-Feed ® in (mm)
Reel
0.035 (0.9)
0.045 (1.1)
0.052 (1.3)
1/16 (1.6) ED020848
25 lb (11.3 kg)
Plastic Spool
ED026805
ED022659
ED022660
ED022661
500 lb (227 kg)
Accu-Trak ® Drum
Conformances
AWS A5.20/A5.20M:
ASME SFA-A5.20:
ABS*:
Lloyd’s Register:
DNV Grade:
BV Grade:
CWB/CSA W48-06:
EN ISO 17632-B:
MIL-E-24403/1:
*Only for 0.045, 0.052 and 1/16 in. diameters
Shielding Gas
100% CO2 75% Argon / 25% CO2 Flow Rate: 40 - 50 CFH
33 lb (15 kg)
Steel Spool
ED030007
ED030008
ED030009
E71T-1C-J, E71T-9C-J
E71T-1M-J, E71T-9M-J
E71T-1C-J, E71T-9C-J
E71T-1M-J, E71T-9M-J
3YSA H15
3YS H15
III YMS H10
SA3YH (CO 2 only)
E491T-9 , E491T-9M
T494T1-1MA-H15
T494T1-1CA-H15
MIL-71T-1C, MIL-71T-1M
600 lb (272 kg)
Speed-Feed ® Reel
ED027364
ED029778
ED029779 ED020851
(a) Electrodes with the optional supplemental designator “J” shall meet the minimum Charpy V-Notch impact energy requirement for its classification at a test temperature of 10°C lower than the test temperature for its classification.
50 lb (22.7 kg)
Coil
ED020844
ED020845
ED020846
MECHANICAL PROPERTIES (1) – As Required per AWS A5.20/A5.20M
Yield
Strength (2)
Tensile
Charpy V-Notch
Strength Elongation
J (ft•lbf)
MPa (ksi) MPa (ksi) % @ -18°C (0°F) @ -29°C (-20°F) @ -40°C (-40°F)
Requirements
AWS E71T-1C-J / E71T-1M-J
400 (58) 480-655 22 27 (20) min. – 27 (20) min.
AWS E71T-9C-J / E71T-9M-J
min. (70-95) min.
(a)
– 27 (20) min. 27 (20) min. (a)
Test Results (3)
As-Welded with
500-570 560-630 27-29 176-190 176-190 130-163
100% CO and 75% Argon/25% CO 2 2 (72-83) (81-91)
(130-140) (130-140) (96-120)