Consumeables Catalog - Lincoln Electric

More documents

Recommendations

Info

FLUX-CORED GAS-SHIELDED (FCAW-G) WIRE UltraCore® Increase weld deposition up to 14 lbs/hr. out-of-position Results in a flat bead shape and enhanced productivity in all positions Operators can set the machine on a single setting and weld in all positions Capable of exceeding 27 J (20 ft•lbf) at -40°C (-40°F) Typical Applications Heavy Fabrication Mining General Fabrication 122 ı THE LINCOLN ELECTRIC COMPANY HD-12M Mild Steel, All Position • AWS E71T-1M-JH8, E71T-9M-JH8, E71T-12M-JH8 Key Features Conformances AWS A5.20/5.20M: ASME SFA-5.20: Welding Positions DIAMETERS / PACKAGING Diameter 33 lb (15 kg) in (mm) Fiber Spool 0.045 0.052 1/16 (1.1) (1.3) (1.6) All Shielding Gas 75-80% Argon / Balance CO2 ED034277 ED034278 ED034279 E71T-1M-JH8, E71T-9M-JH8, E71T-12M-JH8 E71T-1M-JH8, E71T-9M-JH8, E71T-12M-JH8
DEPOSIT COMPOSITION (1) – As Required per AWS A5.20/5.20M (1) Typical all weld metal. (2) Measured with 0.2% offset. (3) See test results disclaimer on pg. 16. (4) As-Welded with 100% CO2 . (5) To estimate ESO, subtract 1/4 in (6.0 mm) from CTWD. FLUX-CORED GAS-SHIELDED (FCAW-G) WIRE UltraCore ® HD-12M (AWS E71T-1M-JH8, E71T-9M-JH8, E71T-12M-JH8) MECHANICAL PROPERTIES (1) – As Required per AWS A5.20/5.20M Yield Strength (2) Tensile Charpy V-Notch Strength Elongation J (ft•lbf) MPa (ksi) MPa (ksi) % @ -29°C (-20°F) @ -40°C (-40°F) Requirements AWS E71T-1M-JH8, E71T-9M-JH8, E71T-12M-JH8 400 (58) 480-620 22 27 (20) min. 27 (20) min. As-Welded with 75-80% Ar / Balance CO2 Test Results min. (70-90) min. (3) As-Welded with 75% Argon / 25% CO2 559 (81) 614 (89) 28 91 (67) 56 (41) %C %Mn %Si %S Requirements (4) AWS E71T-1M-JH8, E71T-9M-JH8, E71T-12M-JH8 As-Welded with 75% Argon / 25% CO2 Typical Results 0.12 max. 1.70 max. 0.90 max. 0.03 max. (3) As-Welded with 75% Argon / 25% CO2 0.06 1.40 0.40 0.01 %P %Ni Diffusible Hydrogen (mL/100g weld deposit) Requirements (4) AWS E71T-1M-JH8, E71T-9M-JH8, E71T-12M-JH8 As-Welded with 75% Argon / 25% CO2 Typical Results 0.03 max. 0.50 max. 8 max. (3) As-Welded with 75% Argon / 25% CO2 0.01 0.39 4-7 TYPICAL OPERATING PROCEDURES Diameter, Polarity Shielding Gas CTWD (5) mm (in) Wire Feed Speed m/min (in/min) Voltage (volts) Approx. Current (amps) Melt-Off Rate kg/hr (lb/hr) Deposition Rate kg/hr (lb/hr) Efficiency (%) 4.4 (175) 23-8 115 1.8 (3.9) 1.5 (3.4) 0.045 in (1.1 mm), DC+ As-Welded with 75% Ar/25% CO2 25 (1) 6.4 7.6 10.2 12.7 (250) (300) (400) (500) 24-29 25-30 25-30 26-31 140 155 185 215 2.5 3.1 4.1 5.1 (5.6) (6.8) (9.0) (11.3) 2.2 2.6 3.5 4.4 (4.8) (5.8) (7.8) (9.8) 85-88 15.2 (600) 27-32 245 6.1 (13.5) 5.3 (11.7) 3.8 (150) 23-28 140 2.1 (4.7) 1.7 (3.8) 0.052 in (1.3 mm), DC+ 6.4 (250) 25-30 180 3.5 (7.8) 3.0 (6.5) As-Welded with 25 (1) 8.9 (350) 26-31 225 5.0 (11.0) 4.2 (9.2) 85-88 75% Ar/25% CO2 10.8 12.7 (425) (500) 26-31 27-32 255 290 6.0 7.1 (13.3) (15.6) 5.1 6.0 (11.2) (13.3) 3.8 (150) 22-27 200 2.9 (6.4) 2.4 (5.3) 1/16 in (1.6 mm), DC+ 5.1 (200) 23-28 230 3.9 (8.5) 3.3 (7.2) As-Welded with 25 (1) 6.4 (250) 24-29 255 4.8 (10.6) 4.1 (9.1) 85-88 75% Ar/25% CO2 7.6 10.2 (300) (400) 24-29 26-31 285 340 5.8 7.7 (12.7) (16.9) 4.9 6.7 (10.9) (14.7) WELDING CONSUMABLES CATALOG ı 123
Page 1 and 2:
C1.10 www.lincolnelectric.com Weldi
Page 3:
GAS-SHIELDED FLUX-CORED (FCAW-G) WI
Page 6 and 7:
Detailed Table of Contents Stick St
Page 8 and 9:
Detailed Table of Contents Submerge
Page 10 and 11:
Detailed Table of Contents Aluminum
Page 12 and 13:
Catalog User Guide 4 7 8 9 10 11 12
Page 14 and 15:
INTRODUCTION 12 ı THE LINCOLN ELEC
Page 16 and 17:
INTRODUCTION Q Lot Certifications C
Page 18 and 19:
INTRODUCTION Disclaimers 16 ı THE
Page 20 and 21:
STICK (SMAW) ELECTRODE Fleetweld ®
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
STICK (SMAW) ELECTRODE Jetweld ® H
Page 30 and 31:
STICK (SMAW) ELECTRODE Excalibur ®
Page 32 and 33:
STICK (SMAW) ELECTRODE Jet-LH ® Lo
Page 34 and 35:
Page 36 and 37:
STICK (SMAW) ELECTRODE Shield-Arc®
Page 38 and 39:
STICK (SMAW) ELECTRODE Shield-Arc®
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
STICK (SMAW) ELECTRODE Notes 46 ı
Page 50 and 51:
MIG (GMAW) WIRE SuperGlide® Typica
Page 52 and 53:
MIG (GMAW) WIRE SuperGlide® Typica
Page 54 and 55:
MIG (GMAW) WIRE SuperArc® Typical
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
MIG (GMAW) WIRE SuperArc® Capable
Page 66 and 67:
TIG (GTAW) CUT LENGTHS Lincoln® Ty
Page 68 and 69:
MIG (GMAW) & TIG (GTAW) CONSUMABLES
Page 70 and 71:
METAL-CORED WIRE Metalshield ® Mil
Page 72 and 73:
Structural Welding Code Seismic Sup
Page 74 and 75: METAL-CORED WIRE Metalshield ® Mil
Page 76 and 77: METAL-CORED WIRE Metalshield ® Low
Page 82 and 83: METAL-CORED CONSUMABLES Notes 80 ı
Page 84 and 85: FLUX-CORED SELF-SHIELDED (FCAW-S) W
Page 86 and 87: Structural Welding Code Seismic Sup
Page 114 and 115: FLUX-CORED GAS-SHIELDED (FCAW-G) WI
Page 160 and 161: SUBMERGED ARC (SAW) FLUX Lincolnwel
Page 174 and 175:
SUBMERGED ARC (SAW) FLUX Lincolnwel
Page 176 and 177:
Lincolnweld ® Features the chemica
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
SUBMERGED ARC (SAW) ELECTRODE Linco
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
SUBMERGED ARC (SAW) CONSUMABLES Not
Page 196 and 197:
STICK (SMAW) ELECTRODE Excalibur®
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
MIG (GMAW) WIRE Blue Max® Stainles
Page 208 and 209:
Page 210 and 211:
MIG (GMAW) WIRE Blue Max ® Stainle
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
FLUX-CORED GAS-SHIELDED (FCAW-G) WI
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
TIG (GTAW) CUT LENGTHS Lincoln® St
Page 234 and 235:
TIG (GTAW) CUT LENGTHS Lincoln® St
Page 236 and 237:
METAL-CORED (GMAW-C) WIRE Outershie
Page 238 and 239:
HARDFACING STICK (SMAW) ELECTRODE W
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
HARDFACING METAL-CORED GAS-SHIELDED
Page 250 and 251:
HARDFACING METAL-CORED (GMAW-C) WIR
Page 252 and 253:
HARDFACING FLUX-CORED SELF-SHIELDED
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
HARDFACING METAL-CORED SUBMERGED AR
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
HARDFACING SUBMERGED ARC (SAW) FLUX
Page 280 and 281:
HARDFACING SUBMERGED ARC (SAW) FLUX
Page 282 and 283:
MIG (GMAW) WIRE SuperGlaze Aluminum
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
SuperGlaze ® MIG (GMAW) WIRE Alumi
Page 290 and 291:
TIG (GTAW) CUT LENGTHS SuperGlaze A
Page 292 and 293:
ALUMINUM & CAST IRON CONSUMABLES No
Page 294 and 295:
PIPELINER ® STICK (SMAW) ELECTRODE
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Pipeliner® Welding Positions All P
Page 306 and 307:
PIPELINER ® FLUX-CORED SELF-SHIELD
Page 308 and 309:
PIPELINER ® FLUX-CORED GAS-SHIELDE
Page 310 and 311:
PIPELINER ® FLUX-CORED GAS-SHIELDE
Page 312 and 313:
PIPELINER ® CONSUMABLES Electrode
Page 314 and 315:
PIPELINER ® CONSUMABLES Electrode
Page 316 and 317:
PIPELINER ® CONSUMABLES EN and ISO
Page 318 and 319:
Agency Approvals NOTE: Approvals ar
Page 320 and 321:
PIPELINER ® CONSUMABLES Notes 318
Page 322 and 323:
Power Generation & Nuclear Lincoln
Page 324 and 325:
BATCH | STICK (SMAW) ELECTRODE Exca
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
BATCH | MIG (GMAW) WIRE SuperArc®
Page 332 and 333:
BATCH | MIG (GMAW) WIRE SuperArc®
Page 334 and 335:
BATCH | MIG (GMAW) WIRE Blue Max®
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Page 342 and 343:
TIG (GTAW) CUT LENGTHS Lincoln® Lo
Page 344 and 345:
BATCH | TIG (GTAW) CUT LENGTHS Linc
Page 346 and 347:
BATCH | ORBITAL TIG (GTAW) WIRE Sup
Page 348 and 349:
BATCH | FLUX-CORED GAS-SHIELDED (FC
Page 350 and 351:
Page 352 and 353:
SUBMERGED ARC (SAW) FLUX AND WIRE C
Page 354 and 355:
SUBMERGED ARC (SAW) WIRE AND FLUX L
Page 356 and 357:
SUBMERGED ARC (SAW) WIRE AND FLUX L
Page 358 and 359:
PACKAGING Tubes, Cans & Cartons 5 l
Page 360 and 361:
PACKAGING Reels & Stem REELS Wire T
Page 362 and 363:
PACKAGING Spools A SPOOLS Wire Type
Page 364 and 365:
PACKAGING Coils, Boxes & Bags COILS
Page 366 and 367:
PACKAGING Drums & Pails DRUMS Wire
Page 368 and 369:
PACKAGING Storage & Handling Stick
Page 370 and 371:
PACKAGING Storage & Handling Metal-
Page 372 and 373:
PACKAGING Storage & Handling Submer
Page 374 and 375:
APPENDIX AWS Classification System
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
Page 382 and 383:
APPENDIX Stick Electrode Types of C
Page 384 and 385:
APPENDIX Submerged Arc Fluxes Flux
Page 386 and 387:
APPENDIX Submerged Arc Flux/Wire Se
Page 388 and 389:
APPENDIX Aluminum Typical Operating
Page 390 and 391:
APPENDIX Aluminum Typical Joint Des
Page 392 and 393:
APPENDIX Innershield® Wire Selecti
Page 394 and 395:
APPENDIX Agency Approvals NOTE: App
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
APPENDIX Safety Guidelines Diesel e
Page 408 and 409:
APPENDIX Safety Guidelines ARC RAYS
Page 410 and 411:
APPENDIX Safety Guidelines CYLINDER
Page 412 and 413:
APPENDIX Safety Guidelines The gase
Page 414 and 415:
APPENDIX Notes
Page 416:
THE LINCOLN ELECTRIC COMPANY 22801
show all

Consumeables Catalog - Lincoln Electric

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?