Consumeables Catalog - Lincoln Electric

More documents

Recommendations

Info

FLUX-CORED GAS-SHIELDED (FCAW-G) WIRE UltraCore® Designed for welding with either 100% CO 2 or 75% Argon/25% CO 2 shielding gases Premium arc performance and bead appearance Typical Applications General fabrication 114 ı THE LINCOLN ELECTRIC COMPANY 71A75 Dual Mild Steel, All Position • AWS E71T-1C-H8, E71T-9C-H8, E71T-1M-H8, E71T-9M-H8 Key Features DIAMETERS / PACKAGING Diameter 15 lb (6.8 kg) Plastic Spool in (mm) 60 lb (27.2 kg) Master Carton 0.045 (1.1) 0.052 (1.3) 1/16 (1.6) *Spool may be plastic or fiber. Conformances AWS A5.20/A5.20M: ASME SFA-A5.20: CWB/CSA W48-06: EN ISO 17632-B: E71T-1C-H8, E71T-1M-H8, Welding Positions All 33 lb (15 kg) Spool* ED031882 ED031669 ED031670 ED031671 Shielding Gas 100% CO 2 75% Argon / 25% CO 2 Flow Rate: 40 - 50 CFH 50 lb (22.7 kg) Fiber Spool ED031844 ED031845 ED031846 E71T-9C-H8, E71T-9M-H8 E71T-1C-H8, E71T-1M-H8, E71T-9C-H8, E71T-9M-H8 E491T-9 H8, E491T-9M H8 T493T1-1MA-H10, T493T1-1CA-H10 500 lb (227 kg) Accu-Trak ® Drum ED032044 ED032046 MECHANICAL PROPERTIES (1) – As Required per AWS A5.20/A5.20M Yield Strength (2) Tensile Charpy V-Notch Strength Elongation J (ft•lbf) MPa (ksi) MPa (ksi) % @ -18°C (0°F) @ -29°C (-20°F) Requirements (4) AWS E71T-1C-H8, E71T-1M-H8 400 (58) 480-655 22 27 (20) min. Not Specified AWS E71T-9C-H8, E71T-9M-H8 Typical Results min. (70-95) min. Not Specified 27 (20) min. (3) As-Welded with 100% CO2 510-550 (73-79) 570-600 (82-87) 26-28 38-95 (28-70) 27-65 (20-48) As-Welded with 75% Ar/25% CO2 570-610 (82-88) 620-660 (89-95) 24-26 62-111 (46-82) 39-85 (29-63)
DEPOSIT COMPOSITION (1) – As Required per AWS A5.20/A5.20M Requirements (4) AWS E71T-1C-H8, E71T-1M-H8 AWS E71T-9C-H8, E71T-9M-H8 Typical Results (3) As-Welded with 100% CO 2 As-Welded with 75% Ar/25% CO 2 FLUX-CORED GAS-SHIELDED (FCAW-G) WIRE UltraCore ® 71A75 Dual (AWS E71T-1C-H8, E71T-1M-H8, E71T-9C-H8, E71T-9M-H8) %C %Mn %Si %S %P 0.12 max. 0.03-0.04 0.03-0.04 1.75 max. 1.28-1.41 1.45-1.60 0.90 max. 0.42-0.49 0.54-0.62 0.03 max. 0.01 0.01 0.03 max. 0.01-0.02 0.01-0.02 Diffusible Hydrogen (mL/100g weld deposit) TYPICAL OPERATING PROCEDURES Diameter, Polarity Shielding Gas (5) CTWD (6) Wire Feed Speed Voltage Approx. Current Melt-Off Rate Deposition Rate Efficiency mm (in) m/min (in/min) (volts) (amps) kg/hr (lb/hr) kg/hr (lb/hr) (%) 0.045 in (1.1 mm), DC+ 75% Ar/25% CO 2 0.052 in (1.3 mm), DC+ 75% Ar/25% CO 2 1/16 in (1.6 mm), DC+ 75% Ar/25% CO 2 25 (1) 25 (1) 25 (1) 4.4 6.4 7.6 8.9 10.2 11.4 12.7 14.0 15.2 3.8 5.1 6.4 7.6 8.9 9.5 10.8 12.1 12.7 3.2 4.4 5.1 5.7 6.4 7.6 8.3 8.9 10.2 (175) (250) (300) (350) (400) (450) (500) (550) (600) (150) (200) (250) (300) (350) (375) (425) (475) (500) (125) (175) (200) (225) (250) (300) (325) (350) (400) 20-25 21-26 22-27 23-28 24-29 25-30 26-31 27-32 27-33 20-25 21-26 22-27 23-28 24-29 25-30 27-31 28-33 29-35 20-25 21-26 22-27 23-28 24-29 25-31 25-32 26-33 28-35 (1) Typical all weld metal. (2) Measured with 0.2% offset. (3) See test results disclaimer on pg. 16. (4) As-Welded with 100% CO2 & As-Welded 75% Argon / 25% CO 2 . (5) When welding under CO 2 , increase voltage by 1 Volt. (6) To estimate ESO, subtract 1/4 in (6.0 mm) from CTWD. NOTE: This product contains micro-alloying elements. Additional information available upon request. 135 150 165 190 205 225 245 265 285 155 165 190 215 235 255 275 295 325 195 215 235 265 285 315 335 365 405 1.8 2.6 3.1 3.6 4.1 4.7 5.2 5.7 6.2 2.0 2.7 3.4 4.1 4.7 5.1 5.8 6.4 6.8 2.4 3.3 3.8 4.3 4.8 5.7 6.2 6.7 7.6 (4.0) (5.7) (6.8) (8.0) (9.1) (10.3) (11.4) (12.5) (13.7) (4.5) (6.0) (7.5) (9.0) (10.5) (11.2) (12.7) (14.2) (15.0) (5.3) (7.4) (8.4) (9.5) (10.5) (12.6) (13.7) (14.7) (16.8) 1.6 2.3 2.7 3.2 3.6 4.1 4.5 5.0 5.4 1.8 2.4 2.9 3.5 4.1 4.4 5.0 5.6 5.9 2.1 2.9 3.3 3.7 4.2 5.0 5.4 5.8 6.6 8.0 max. 3-8 4-8 (3.5) (5.0) (6.0) (7.0) (8.0) (9.0) (10.0) (10.9) (11.9) (3.9) (5.2) (6.5) (7.8) (9.1) (9.8) (11.1) (12.4) (13.0) (4.6) (6.4) (7.3) (8.2) (9.2) (11.0) (11.9) (12.8) (14.6) 86-88 86-88 86-88 WELDING CONSUMABLES CATALOG ı 115
Page 1 and 2:
C1.10 www.lincolnelectric.com Weldi
Page 3:
GAS-SHIELDED FLUX-CORED (FCAW-G) WI
Page 6 and 7:
Detailed Table of Contents Stick St
Page 8 and 9:
Detailed Table of Contents Submerge
Page 10 and 11:
Detailed Table of Contents Aluminum
Page 12 and 13:
Catalog User Guide 4 7 8 9 10 11 12
Page 14 and 15:
INTRODUCTION 12 ı THE LINCOLN ELEC
Page 16 and 17:
INTRODUCTION Q Lot Certifications C
Page 18 and 19:
INTRODUCTION Disclaimers 16 ı THE
Page 20 and 21:
STICK (SMAW) ELECTRODE Fleetweld ®
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
STICK (SMAW) ELECTRODE Jetweld ® H
Page 30 and 31:
STICK (SMAW) ELECTRODE Excalibur ®
Page 32 and 33:
STICK (SMAW) ELECTRODE Jet-LH ® Lo
Page 34 and 35:
Page 36 and 37:
STICK (SMAW) ELECTRODE Shield-Arc®
Page 38 and 39:
STICK (SMAW) ELECTRODE Shield-Arc®
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
STICK (SMAW) ELECTRODE Notes 46 ı
Page 50 and 51:
MIG (GMAW) WIRE SuperGlide® Typica
Page 52 and 53:
MIG (GMAW) WIRE SuperGlide® Typica
Page 54 and 55:
MIG (GMAW) WIRE SuperArc® Typical
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
MIG (GMAW) WIRE SuperArc® Capable
Page 66 and 67: TIG (GTAW) CUT LENGTHS Lincoln® Ty
Page 68 and 69: MIG (GMAW) & TIG (GTAW) CONSUMABLES
Page 70 and 71: METAL-CORED WIRE Metalshield ® Mil
Page 72 and 73: Structural Welding Code Seismic Sup
Page 74 and 75: METAL-CORED WIRE Metalshield ® Mil
Page 76 and 77: METAL-CORED WIRE Metalshield ® Low
Page 82 and 83: METAL-CORED CONSUMABLES Notes 80 ı
Page 84 and 85: FLUX-CORED SELF-SHIELDED (FCAW-S) W
Page 114 and 115: FLUX-CORED GAS-SHIELDED (FCAW-G) WI
Page 160 and 161: SUBMERGED ARC (SAW) FLUX Lincolnwel
Page 166 and 167:
SUBMERGED ARC (SAW) FLUX Lincolnwel
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Lincolnweld ® Features the chemica
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
SUBMERGED ARC (SAW) ELECTRODE Linco
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
SUBMERGED ARC (SAW) CONSUMABLES Not
Page 196 and 197:
STICK (SMAW) ELECTRODE Excalibur®
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
MIG (GMAW) WIRE Blue Max® Stainles
Page 208 and 209:
Page 210 and 211:
MIG (GMAW) WIRE Blue Max ® Stainle
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
FLUX-CORED GAS-SHIELDED (FCAW-G) WI
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
TIG (GTAW) CUT LENGTHS Lincoln® St
Page 234 and 235:
TIG (GTAW) CUT LENGTHS Lincoln® St
Page 236 and 237:
METAL-CORED (GMAW-C) WIRE Outershie
Page 238 and 239:
HARDFACING STICK (SMAW) ELECTRODE W
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
HARDFACING METAL-CORED GAS-SHIELDED
Page 250 and 251:
HARDFACING METAL-CORED (GMAW-C) WIR
Page 252 and 253:
HARDFACING FLUX-CORED SELF-SHIELDED
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
HARDFACING METAL-CORED SUBMERGED AR
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
HARDFACING SUBMERGED ARC (SAW) FLUX
Page 280 and 281:
HARDFACING SUBMERGED ARC (SAW) FLUX
Page 282 and 283:
MIG (GMAW) WIRE SuperGlaze Aluminum
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
SuperGlaze ® MIG (GMAW) WIRE Alumi
Page 290 and 291:
TIG (GTAW) CUT LENGTHS SuperGlaze A
Page 292 and 293:
ALUMINUM & CAST IRON CONSUMABLES No
Page 294 and 295:
PIPELINER ® STICK (SMAW) ELECTRODE
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Pipeliner® Welding Positions All P
Page 306 and 307:
PIPELINER ® FLUX-CORED SELF-SHIELD
Page 308 and 309:
PIPELINER ® FLUX-CORED GAS-SHIELDE
Page 310 and 311:
PIPELINER ® FLUX-CORED GAS-SHIELDE
Page 312 and 313:
PIPELINER ® CONSUMABLES Electrode
Page 314 and 315:
PIPELINER ® CONSUMABLES Electrode
Page 316 and 317:
PIPELINER ® CONSUMABLES EN and ISO
Page 318 and 319:
Agency Approvals NOTE: Approvals ar
Page 320 and 321:
PIPELINER ® CONSUMABLES Notes 318
Page 322 and 323:
Power Generation & Nuclear Lincoln
Page 324 and 325:
BATCH | STICK (SMAW) ELECTRODE Exca
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
BATCH | MIG (GMAW) WIRE SuperArc®
Page 332 and 333:
BATCH | MIG (GMAW) WIRE SuperArc®
Page 334 and 335:
BATCH | MIG (GMAW) WIRE Blue Max®
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Page 342 and 343:
TIG (GTAW) CUT LENGTHS Lincoln® Lo
Page 344 and 345:
BATCH | TIG (GTAW) CUT LENGTHS Linc
Page 346 and 347:
BATCH | ORBITAL TIG (GTAW) WIRE Sup
Page 348 and 349:
BATCH | FLUX-CORED GAS-SHIELDED (FC
Page 350 and 351:
Page 352 and 353:
SUBMERGED ARC (SAW) FLUX AND WIRE C
Page 354 and 355:
SUBMERGED ARC (SAW) WIRE AND FLUX L
Page 356 and 357:
SUBMERGED ARC (SAW) WIRE AND FLUX L
Page 358 and 359:
PACKAGING Tubes, Cans & Cartons 5 l
Page 360 and 361:
PACKAGING Reels & Stem REELS Wire T
Page 362 and 363:
PACKAGING Spools A SPOOLS Wire Type
Page 364 and 365:
PACKAGING Coils, Boxes & Bags COILS
Page 366 and 367:
PACKAGING Drums & Pails DRUMS Wire
Page 368 and 369:
PACKAGING Storage & Handling Stick
Page 370 and 371:
PACKAGING Storage & Handling Metal-
Page 372 and 373:
PACKAGING Storage & Handling Submer
Page 374 and 375:
APPENDIX AWS Classification System
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
Page 382 and 383:
APPENDIX Stick Electrode Types of C
Page 384 and 385:
APPENDIX Submerged Arc Fluxes Flux
Page 386 and 387:
APPENDIX Submerged Arc Flux/Wire Se
Page 388 and 389:
APPENDIX Aluminum Typical Operating
Page 390 and 391:
APPENDIX Aluminum Typical Joint Des
Page 392 and 393:
APPENDIX Innershield® Wire Selecti
Page 394 and 395:
APPENDIX Agency Approvals NOTE: App
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
APPENDIX Safety Guidelines Diesel e
Page 408 and 409:
APPENDIX Safety Guidelines ARC RAYS
Page 410 and 411:
APPENDIX Safety Guidelines CYLINDER
Page 412 and 413:
APPENDIX Safety Guidelines The gase
Page 414 and 415:
APPENDIX Notes
Page 416:
THE LINCOLN ELECTRIC COMPANY 22801
show all

Consumeables Catalog - Lincoln Electric

Create successful ePaper yourself

Delete template?

Save as template?