MaxiScan™ 1000 - OPAL

OEM SCAN ENGINE
Benefits:
• Small, high
performance bar
code scan engine
• Supports all
common 1D bar
codes and PDF
417 (option)
• Bright scan line
• Depth of field to
10cm (4”)
• Wide scan angle
(70°)
• Reliable solid state
CCD technology
with low power
consumption and
no hazards in use
• Flexible
configuration via
EasySet software
and flash memory
• Ideal for integration
into equipment
requiring bar code
capability
P R O D U C T PROFILE
MaxiScan 1000
The MaxiScan 1000 is a high
performance bar code scanning
and decoding engine. Small, light
and resistant to shock (due to the
solid state design), the engine can
be easily integrated into hand-held
and fixed equipment to scan bar
codes and transmit the data for
processing. The M1000 is
suitable for the following
applications:
• Integration into hand-held
scanning devices
• Integration into other bar code
printing or processing devices
• Integration into processing
equipment (laboratory
equipment, photo-processing
machines, storage
equipment, etc.)
The M1000 scans between 100
and 800 scans per second and
uses a custom ASIC processor to
decode and transmit data at high
speed. Many different reading
and data formatting parameters
can be set by the user, or defined
by the host on-line.
As standard, the engine is
decoded and transmits using the
RS 232 & TTL protocols.
In common with most
Intermec scanners, the M1000 is
compatible with EasySet setup
software for the fastest on-line or
off-line configuration.

General
The MaxiScan 1000 is a high performance
bar code scanning and decoding engine
Physical
Length: 56.5mm (2.22”)
Width: 47mm (1.85”)
Height: 27.3mm (1.1”)
Connector: 14-pin Male 2mm pitch
Molex/Berg
Scanning Performance
Scan Rate: 100 to 800 scans /s, default
100 to 400 auto-adaptive
Minimum X dimension: 0.1mm (4 mil)
Depth of field: 0 to 10 cm (4”) based on
code 39:
0.1mm (4 mil): 3-5.4cm (1.2-2.1”)
0.2mm (8 mil): 2-6.8cm (0.78-2.7”)
0.3mm (12 mil): 1.8-8cm (0.7-3.1”)
0.5mm (20 mil): 3-9.4cm (1.2-3.4”)
1mm (40 mil): 3-11.5cm (1.2-4.5”)
Scan angle: 70°
PCR: 25% minimum
Code Width: 12cm (4.7”) max
(X above .254mm /10 mil)
Skew: +- 65°
Pitch: +- 70°
Symbologies
UPC E,A, EAN, Code 39; Interleaved,
Matrix, Industrial and Standard 2 of 5;
Code 128, UCC EAN 128, Codabar, Code
93, MSI, Plessey
Design
Processor: Custom chip (ASIC inc. DSP
processor) for fast signal processing and
decoding. Flash memory
Optics: CCD linear image sensor with
sharp aiming beam
Light source: red, long life LEDs
Environmental Characteristics
Operating temperature: 0° to 40°C
(32° to 104°F)
27.3mm
Storage temperature: -25° to 60°C
(-13° to 140°F)
Relative humidity: 10% to 90%
non-condensing
Ambient lighting: 0-4000 lux
Shock resistance: depends on enclosure
Vibration resistance: depends on
enclosure
Sealing: depends on enclosure
Electrical Characteristics
Power requirements: +5VDC+-5%
Current consumption: approx.
150mA–220mA, depending on
configuration
Advanced Features
Firmware updates via flash memory,
programmable data format (code
identification, preamble and postamble),
intercharacter and intermessage delays,
variable time-out, and many others
Interfaces
RS TTL, RS 232C
Synchronization: one input line and one
output synchronization signal
Accessories
14 pin female connector, Demo cable with
good read buzzer, RS TTL to RS 232C
adapter cable, EasySet software on CD
ROM, Integration Guide
Configuration
Setup options include EasySet PC
Windows software, by direct connection
& bar code printing (custom setup utility),
or by conventional bar code setup manual
Regulatory Approvals
CE:
EN 55022 (1994), Class B on
radiated emissions
56.5mm
EN 61000-4-8(1994), heavy industry
environment on immunity to magnetic field
Low Voltage Directive 73/23/EEC as
amended by 93/68/EEC
EN 60950(1993) standard as an
internal component
Designed to comply with EN 61000-4-3
(1997) and ENV 50204(1998) standards,
heavy industry environment on
EMC immunity
USA:
FCC rules Part 15.109(a) on
radiated emissions
UL recognized component, UL 1950
CANADA:
This Class B digital apparatus meets the
requirement on radiated noise emissions
of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe B
respecte l’exigence sur les émissions de
bruits rayonnés du Règlement sur le
matériel brouilleur du Canada.
Manufacturer of final product is responsible
for compliance with regulatory standards
that apply.
IEC 825-1:
Complies with IEC 825-1 class 1.
Note: this device uses LED illumination.
Restrictions on Use
No license is granted expressly, intended
or otherwise under any patent or
intellectual property rights belonging
to Intermec Technologies Corporation.
The application of this component could
infringe on the intellectual property of
Intermec Technologies Corporation or
other companies and licenses for use must
be sought as appropriate.
An implied license is given for any
intellectual property applying strictly to
the design of this particular component.
Switzerland • OPAL Associates AG •Motorenstrasse 116 • CH-8620 Wetzikon • Telefon +41 (0)1 931 12 22 • Telefax +41 (0)1 931 12 20 •
Email info@opal.ch • OPAL Associates SA • Avenue des Boveresses 54 • Case postale 29 • CH 1000 Lausanne 21 • Telefon +41 (0)21 653 95 00 •
Telefax +41 (0)21 653 95 02 • Email info@opalsa.ch • Germany • OPAL Associates GmbH • August-Borsig-Str. 9 • D-78467 Konstanz
Telefon +49 (0)7531 991 551 • Telefax +49 (0)7531 991 548 • Email info@opalgmbh.de • Austria • OPAL Associates GesmbH • A-6840 Götzis
Vorarlberger Wirtschaftspark • Telefon +43 (0) 5523 58833 • Telefax +43 (0)5523 521569 • Email info@opalgmbh.at
47mm