ENERGY STAR Power and Performance Data Sheet - IBM
ENERGY STAR Power and Performance Data Sheet - IBM ENERGY STAR Power and Performance Data Sheet - IBM
ENERGY STAR ® Power and Performance Data Sheet IBM System x3850 X5 (7145-xxx), w/ four 95W 4-core Intel Xeon® CPU (see Qualified Configurations) System Characteristics Form Factor 4U Available Processor Sockets 4 Available DIMM Slots / Max Memory Capacity 64 slots / 1024 GB Max ECC and/or Fully Buffered DIMMs Yes, ECC, Registered DIMMs Available Expansion Slots 7 PCIe Minimum and Maximum # of Hard Drives 0 minimum / 8 maximum SAS or SATA Redundant Power Supply Capable? Yes Power Supply Make and Model IBM PN 39Y7203 1975W PS Power Supply Output Rating* (watts) 1975 Minimum and Maximum # of Power Supplies 1 minimum / 2 maximum Input Power Range (AC or DC) 100 - 240 VAC 50-60 Hz Power Supply Efficiency at Specified Loadings* 90.7%@10%, 93.1%@20%, 94.1%@50%, 91.8%@100% Power Supply Power Factor at Specified Loadings* 0.883@10%, 0.960@20%, 0.992@50%, 0.996@100% Microsoft Windows®: Server 2008 (DataCenter x64 / Enterprise x64 / Operating Systems Supported¹ Standard x64, Web x64) / 2008 R2 / HPC Server 2008; RedHat: RHEL 5 (x64 / Xen x64 ); SUSE SLES 10 & 11 (EM64T / Xen for EM64T); VMware ESX Server 4.0 / 4.1, ESXi Server 4.0 / 4.1; Oracle Solaris 10 Installed Operating System for Testing * Note: Power supply information is for a single power supply only x SUSE SLES 11 (1) Full compatability listing maintained at www.ibm.com/servers/eserver/serverproven/compat/us/nos/matrix.shtml System Configurations Minimum Typical Maximum Configuration ID: See Qualified Configuration Section 7145-xxx 7145-xxx 7145-xxx Processor Information 4, Intel Xeon E7520 4, Intel Xeon E7520 4, Intel Xeon E7520 Memory Information 8 Dimms, 4GB each 32 Dimms, 2GB each 64 Dimms, 16GB each Internal Storage 1x 2.5 inch, 10kRPM SAS I/O Devices onboard dual 1 GB NIC 3x 2.5 inch, 10kRPM SAS onboard dual 1 GB NIC + 2x PCIe dual 1GB NIC 8x 2.5 inch, 10kRPM SAS onboard dual 1 GB NIC + 4x PCIe dual 1GB NIC + 1x 1-port Fibre HBA + 2x ServeRaid BR10i Power Supply Number and Redundancy Configuration 2 redundant 2 redundant 2 redundant Management Controller or Service Processor Installed? YES YES YES Other Hardware Features / Accessories Internal SAS controller Internal SAS controller Internal SAS controller Power Data Minimum Typical Maximum Idle Category (1S and 2S only) N/A (3S or 4S) ENERGY STAR Idle Power Allowance (1S and 2S only) N/A N/A N/A Measured Idle Power (watts) 360.0 444.0 929.0 Power at Full Load* (watts) 496.0 678.0 1300.0 Benchmark / Method Used for Full Load Test STREAM rev 5.8 / TRIAD (Linux - OpenMP compilation) Test Voltage and Frequency for Idle and Full Load Test 230Vac / 60 Hz Range of Total Estimated Energy Usage ** (kWh/year) 6,307 to 8,690 7,779 to 11,879 16,276 to 22,776 Link to Detailed Power Calculator (if available) www.ibm.com/systems/bladecenter/resources/powerconfig.html * Note: Full load power represents the sustained, average power at 100% load of the given workload, and does not necessarily represent the absolute peak power or the highest average, sustained power possible for other workloads. ** Note: Estimated kWh/year gives the absolute range of energy use a user could expect from continuous operation (24x7x365) and ranges from 100% Idle usage to 100% full load operation. The calculation also includes typical data center overhead at a ratio of 1 watt of overhead to every 1 watt of IT load (corresponding to a PUE of 2.0). Closer approximations may be found by using established power calculators and specific information about the intended operating environment (e.g., average time at Idle, data center PUE, etc.). Power and Performance for Benchmark #1 Minimum Typical Maximum Benchmark Used and Type of Workload STREAM rev 5.8 / TRIAD (Linux - OpenMP compilation)³ Avg. Power Measured During Benchmark Run 496.0 678.0 1300.0 Benchmark Performance Score 14132.1984 MB/s 26376.8512 MB/s 51563.0378 MB/s Power Performance Ratio (perf score/avg. power) Link to Full Benchmark Report (Where Available) 28.4923 MB/s / watt 38.9039 MB/s / watt 39.6639 MB/s / watt Benchmark #1 3. The STREAM benchmark and http://www.cs.virginia.edu/stream/ (STREAM web site) are the responsibility of John D. McAlpin (mccalpin@cds.virginia.edu)
<strong>ENERGY</strong> <strong>STAR</strong> ® <strong>Power</strong> <strong>and</strong> <strong>Performance</strong> <strong>Data</strong> <strong>Sheet</strong><br />
<strong>IBM</strong> System x3850 X5 (7145-xxx), w/ four 95W 4-core Intel Xeon® CPU (see Qualified Configurations)<br />
System Characteristics<br />
Form Factor<br />
4U<br />
Available Processor Sockets<br />
4<br />
Available DIMM Slots / Max Memory Capacity<br />
64 slots / 1024 GB Max<br />
ECC <strong>and</strong>/or Fully Buffered DIMMs<br />
Yes, ECC, Registered DIMMs<br />
Available Expansion Slots<br />
7 PCIe<br />
Minimum <strong>and</strong> Maximum # of Hard Drives<br />
0 minimum / 8 maximum SAS or SATA<br />
Redundant <strong>Power</strong> Supply Capable?<br />
Yes<br />
<strong>Power</strong> Supply Make <strong>and</strong> Model <strong>IBM</strong> PN 39Y7203 1975W PS<br />
<strong>Power</strong> Supply Output Rating* (watts)<br />
1975<br />
Minimum <strong>and</strong> Maximum # of <strong>Power</strong> Supplies<br />
1 minimum / 2 maximum<br />
Input <strong>Power</strong> Range (AC or DC)<br />
100 - 240 VAC 50-60 Hz<br />
<strong>Power</strong> Supply Efficiency at Specified Loadings*<br />
90.7%@10%, 93.1%@20%, 94.1%@50%, 91.8%@100%<br />
<strong>Power</strong> Supply <strong>Power</strong> Factor at Specified Loadings* 0.883@10%, 0.960@20%, 0.992@50%, 0.996@100%<br />
Microsoft Windows®: Server 2008 (<strong>Data</strong>Center x64 / Enterprise x64 /<br />
Operating Systems Supported¹<br />
St<strong>and</strong>ard x64, Web x64) / 2008 R2 / HPC Server 2008; RedHat: RHEL 5<br />
(x64 / Xen x64 ); SUSE SLES 10 & 11 (EM64T / Xen for EM64T); VMware<br />
ESX Server 4.0 / 4.1, ESXi Server 4.0 / 4.1; Oracle Solaris 10<br />
Installed Operating System for Testing<br />
* Note: <strong>Power</strong> supply information is for a single power supply only x<br />
SUSE SLES 11<br />
(1) Full compatability listing maintained at www.ibm.com/servers/eserver/serverproven/compat/us/nos/matrix.shtml<br />
System Configurations<br />
Minimum Typical Maximum<br />
Configuration ID: See Qualified Configuration Section 7145-xxx 7145-xxx 7145-xxx<br />
Processor Information 4, Intel Xeon E7520 4, Intel Xeon E7520 4, Intel Xeon E7520<br />
Memory Information 8 Dimms, 4GB each 32 Dimms, 2GB each 64 Dimms, 16GB each<br />
Internal Storage<br />
1x 2.5 inch, 10kRPM<br />
SAS<br />
I/O Devices onboard dual 1 GB NIC<br />
3x 2.5 inch, 10kRPM<br />
SAS<br />
onboard dual 1 GB NIC<br />
+ 2x PCIe dual 1GB<br />
NIC<br />
8x 2.5 inch, 10kRPM<br />
SAS<br />
onboard dual 1 GB NIC<br />
+ 4x PCIe dual 1GB NIC<br />
+ 1x 1-port Fibre HBA +<br />
2x ServeRaid BR10i<br />
<strong>Power</strong> Supply Number <strong>and</strong> Redundancy Configuration 2 redundant 2 redundant 2 redundant<br />
Management Controller or Service Processor Installed? YES YES YES<br />
Other Hardware Features / Accessories Internal SAS controller Internal SAS controller Internal SAS controller<br />
<strong>Power</strong> <strong>Data</strong><br />
Minimum Typical Maximum<br />
Idle Category (1S <strong>and</strong> 2S only)<br />
N/A (3S or 4S)<br />
<strong>ENERGY</strong> <strong>STAR</strong> Idle <strong>Power</strong> Allowance (1S <strong>and</strong> 2S only) N/A N/A N/A<br />
Measured Idle <strong>Power</strong> (watts) 360.0 444.0 929.0<br />
<strong>Power</strong> at Full Load* (watts) 496.0 678.0 1300.0<br />
Benchmark / Method Used for Full Load Test<br />
STREAM rev 5.8 / TRIAD (Linux - OpenMP compilation)<br />
Test Voltage <strong>and</strong> Frequency for Idle <strong>and</strong> Full Load Test<br />
230Vac / 60 Hz<br />
Range of Total Estimated Energy Usage ** (kWh/year) 6,307 to 8,690 7,779 to 11,879 16,276 to 22,776<br />
Link to Detailed <strong>Power</strong> Calculator (if available) www.ibm.com/systems/bladecenter/resources/powerconfig.html<br />
* Note: Full load power represents the sustained, average power at 100% load of the given workload, <strong>and</strong> does not necessarily represent the absolute peak power or the<br />
highest average, sustained power possible for other workloads.<br />
** Note: Estimated kWh/year gives the absolute range of energy use a user could expect from continuous operation (24x7x365) <strong>and</strong> ranges from 100% Idle usage to 100% full load<br />
operation. The calculation also includes typical data center overhead at a ratio of 1 watt of overhead to every 1 watt of IT load (corresponding to a PUE of 2.0). Closer<br />
approximations may be found by using established power calculators <strong>and</strong> specific information about the intended operating environment (e.g., average time at Idle, data center PUE,<br />
etc.).<br />
<strong>Power</strong> <strong>and</strong> <strong>Performance</strong> for Benchmark #1<br />
Minimum Typical Maximum<br />
Benchmark Used <strong>and</strong> Type of Workload<br />
STREAM rev 5.8 / TRIAD (Linux - OpenMP compilation)³<br />
Avg. <strong>Power</strong> Measured During Benchmark Run 496.0 678.0 1300.0<br />
Benchmark <strong>Performance</strong> Score 14132.1984 MB/s 26376.8512 MB/s 51563.0378 MB/s<br />
<strong>Power</strong> <strong>Performance</strong> Ratio (perf score/avg. power)<br />
Link to Full Benchmark Report (Where Available)<br />
28.4923 MB/s / watt 38.9039 MB/s / watt 39.6639 MB/s / watt<br />
Benchmark #1<br />
3. The STREAM benchmark <strong>and</strong> http://www.cs.virginia.edu/stream/ (STREAM web site) are the responsibility of John D. McAlpin (mccalpin@cds.virginia.edu)
<strong>ENERGY</strong> <strong>STAR</strong> <strong>Power</strong> <strong>and</strong> <strong>Performance</strong> <strong>Data</strong> <strong>Sheet</strong><br />
<strong>IBM</strong> System x3850 X5 (7145-xxx), w/ four 95W 4-core Intel Xeon® CPU (see Qualified Configurations)<br />
Page 2 of 2<br />
<strong>Power</strong> Saving Features<br />
Processor Dynamic Voltage <strong>and</strong> Frequency Scaling<br />
Processor or Core Reduced <strong>Power</strong> States<br />
<strong>Power</strong> Capping<br />
Variable Speed Fan Control Based on <strong>Power</strong> or Thermal Readings<br />
Low <strong>Power</strong> Memory States<br />
Low <strong>Power</strong> I/O States<br />
Liquid Cooling Capability<br />
Other1:<br />
Other2:<br />
Other4:<br />
<strong>Power</strong> <strong>and</strong> Temperature Measurement <strong>and</strong> Reporting<br />
Input <strong>Power</strong> Available & Accuracy?<br />
Input Air Temp Available & Accuracy?<br />
Processor Utilization Available?<br />
Other <strong>Data</strong> Measurements Available & Accuracy?<br />
Compatible Protocols for <strong>Data</strong> Collection<br />
Averaging method <strong>and</strong> time period<br />
Thermal Information *<br />
Notes<br />
Other3:<br />
Yes, +/-5%<br />
Yes, +/-3°C<br />
Enabled on<br />
Shipment<br />
X<br />
X<br />
X<br />
X<br />
End-User Enabling<br />
Required<br />
Minimum Typical Maximum<br />
Total <strong>Power</strong> Dissipation (watts) 496.0 678.0 1300.0<br />
Delta Temperature at Exhaust at Peak Temp. (˚C) 5.8 7.6 13.9<br />
Airflow at Maximum Fan Speed (CFM) at Peak Temp. 164.0 164.0 164.0<br />
Airflow at Nominal Fan Speed (CFM) at Nominal Temp. 84.0 84.0 84.0<br />
* References: ASHRAE Extended Environmental Envelope Final August 1, 2008<br />
Thermal Guidelines for <strong>Data</strong> Processing Environments, ASHRAE, 2004, ISBN 1-931862-43-5<br />
Peak temperature is defined as 35 ˚C, Nominal Temperature is defined as 18 - 27 ˚C<br />
<strong>ENERGY</strong> <strong>STAR</strong> Qualified Configurations<br />
Include specific information on <strong>ENERGY</strong> <strong>STAR</strong> Qualified SKUs or configurations<br />
This 4 socket product family (7145-xxx) covers base system models<br />
7145-1Rx<br />
7145-ARx<br />
with four 95W 4-core Xeon E7520 CPUs installed,<br />
<strong>and</strong> includes the "build your own" or "Configure To Order" (CTO) models designated:<br />
7145-AC1<br />
7145-HC1<br />
7145-MC1<br />
with four 95W 4-core Xeon E7520 CPUs installed.<br />
Note: for all models (except the above CTO designations) the third letter in the -xxx model type varies by<br />
geography. For US models x=U. (i.e, 7145-1RU <strong>and</strong> 7145-ARU)<br />
Yes<br />
n/a<br />
<strong>IBM</strong> Active Energy Manager (AEM), IPMI<br />
<strong>Power</strong>: 1 second sample, value stored in an Accumulation register.<br />
Polling interval of 1 minute minimum (register divided by difference<br />
in time readings to get avg power value). Temp/CPU: returns<br />
present value when read.
Change language