overhead door holders/stops - Architectural Builders Hardware Mfg ...
overhead door holders/stops - Architectural Builders Hardware Mfg ... overhead door holders/stops - Architectural Builders Hardware Mfg ...
1803HO FLOOR STOP & HOLDER 1804 PIPE STOP & HOLDER • Ideal for high abuse installations like schools, heavy doors and correctional facilities. • Installed with quick set cement • door is hooked to floor portion with a stainless steel hook • Heavy duty construction for use in schools, institutions and correctional facilities • All stainless steel components with rubber bumper • The rubber bumper on the door hits the floor portion when used as a stop • Door is hooked to floor portion with stainless steel hook when used as holder • Floor portion secured in cement • Door portion - installed with (4) #8 x 1-1/4” screws (supplied standard), sex bolts optional • Floor portion is solid 1” diameter x 1’ long stainless steel rod 1805 ALL STAINLESS STEEL SERIES SURFACE BOLTS N1805 Custom Lengths Available • All stainless steel components • 1” throw • 8” (N1815) 12” standard (N1825) • With bracket * for lock - suffix L lock by others • Heavy duty for extreme conditions • Made of all stainless steel, finish US32D • 3/4” wide x 3/4” thick bar • Unit locks automatically. To release press knob toward door while unlatching. 1880 SLIDE BOLT PADLOCK LATCH Patent Pending T-Strike ASA Strike N1805L Custom Lengths Available • Special lengths available on request • Sex bolts available • Top and bottom strikes available • With bracket for lock - suffix L lock by others with double lock bracket Suffix DL • Accepts lock (not provided) with 3/8” max. diameter shackle and 1-3/4” min. shackle opening height. 28 ABH Manufacturing, Inc. • www.abhmfg.com • 630.875.9900; Fax 800.932.9224 * AvAilAble on TArgeT-1 QuickShip. See inSide cover for deTAilS. DL HD1805 Custom Lengths Available neW! • 12” (HD1825TB) and 24” (HD1835TB) standard, custom lengths available • Sex bolts standard • Supplied with top and bottom strikes neW! • Ideal for lockers and temporary locking situations • Stainless steel assembly • Non-handed reversible with built-in fail safe • Fits standard 160 or 161 prep in 1-3/4” or 1-3/8” doors • Standard T-strike or ASA strike available • For use with 3/8” diameter padlock (not provided) • Model 1884 for 2-3/4” backset (161 prep) • Model 1888 for 2-3/8” backset (160 prep)
ROLLER LATCHES ABH Roller Latches are easily adjustable for roller projection for proper contact between roller and frame strike. Adjustment is made with 2 screws on the face of the roller latch body. Maximum roller projection is 5/16”. The nylon roller provides durability and quiet operation. All units are stainless steel construction. Meets ANSI/BHMA A156.16, e19091. Available in most architectural finishes. Custom strikes available. 1890 1890S 1891 1893 1895 • Cast full lip strike 1-11/16” wide x 2-1/4” • Latch face 1” x 3-3/8” • Fasteners Body (2) #10 x 3/4” FH SMS Strike (2) #8 x 3/4” FH SMS • ASA Strike 1-1/8” wide x 4-3/4” • Latch face 1” x 3-3/8” • Fasteners Body (2) #10 x 3/4” FH SMS Strike (2) #12-24 x 3/8” FH MS • With integrated angle stop • Mounts in header with strike at top of door • Cast strike 1-1/8” wide x 2-1/4” • Latch face 1-1/2” x 4-1/2” • Fasteners Body (2) #10 x 3/4” FH SMS Strike (2) #10 x 3/4” FH SMS 1892 1894 • Roller projection can be adjusted by turning the knurled knob at the back of the latch • Maximum roller projection 1/2” to compensate for different door clearances • Uses standard heavy duty cylindrical lock cut-out • Standard strike 1-1/8” wide x 2-3/4” • Body 1-1/8” wide x 2-1/4” • For roller latch with ASA strike order 1896 (1-1/4” wide x 4-7/8”) • Fasteners Body (2) #8 x 3/4” FH SMS Strike (2) #10 x 3/4” FH SMS ASA Strike #12-24 x 3/4 FH SMS • Custom Strike for double acting doors • Latch face 1” x 3-3/8” • Fasteners Body (2) #10 x 3/4” FH SMS Strike #8 x 3/4” FH SMS (Quantity determined by width) • Contact Factory for order form • T Strike 1-1/8” wide x 2-3/4” • Latch face 1” x 3-3/8” • Fasteners Body (2) #10 x 3/4” FH SMS Strike (2) #10 x 3/4” FH SMS • extended cast strike 2-1/8” wide x 2-1/4” • Latch face 1” x 3-3/8” • Fasteners Body (2) #10 x 3/4” FH SMS Strike (2) #8 x 3/4” FH SMS ABH Manufacturing, Inc. • www.abhmfg.com • 630.875.9900; Fax 800.932.9224 29
- Page 1 and 2: Contents Overhead Door Holders/Stop
- Page 3 and 4: 3300ADJ ADJUSTABLE SeRIeS MeDIUM DU
- Page 5 and 6: FRAME REINFORCEMENTS FOR JAMB BRACK
- Page 7 and 8: 6040 SeRIeS eXIT ONLy PUSH-PULL LAT
- Page 9 and 10: EX, H & X SERIES PUSH-PULL WITH HIP
- Page 11 and 12: 2500 SURFACe WALL MOUNTeD 2600 SING
- Page 13 and 14: 0195 • 3/4” offset • For inte
- Page 15 and 16: INTERMEDIATE PIVOTS Intermediate pi
- Page 17 and 18: SCRM 4500 SPECIAL COMBINATION ReSCU
- Page 19 and 20: A270HD/A270LL FOR 2” DOORS • Co
- Page 21 and 22: POWER TRANSFER GEAR HINGES All full
- Page 23 and 24: HALF SURFACE A503 SURFACe MOUNTeD D
- Page 25 and 26: POWER TRANSFER* PT/PTR/PTS105 PT/PT
- Page 27: MANUAL FLUSH BOLTS Used to lock and
- Page 31 and 32: HOSPITAL PUSH/PULLS ABH G-J ROCKWOO
1803HO FLOOR STOP & HOLDER<br />
1804 PIPE STOP & HOLDER<br />
• Ideal for high abuse installations like schools, heavy <strong>door</strong>s<br />
and correctional facilities.<br />
• Installed with quick set cement<br />
• <strong>door</strong> is hooked to floor portion with a stainless steel hook<br />
• Heavy duty construction for use in schools, institutions and correctional facilities<br />
• All stainless steel components with rubber bumper<br />
• The rubber bumper on the <strong>door</strong> hits the floor portion when used as a stop<br />
• Door is hooked to floor portion with stainless steel hook when used as holder<br />
• Floor portion secured in cement<br />
• Door portion - installed with (4) #8 x 1-1/4” screws (supplied standard), sex bolts optional<br />
• Floor portion is solid 1” diameter x 1’ long stainless steel rod<br />
1805 ALL STAINLESS STEEL SERIES<br />
SURFACE BOLTS<br />
N1805 Custom Lengths Available<br />
• All stainless steel components<br />
• 1” throw<br />
• 8” (N1815) 12” standard (N1825)<br />
• With bracket * for lock - suffix L lock by others<br />
• Heavy duty for extreme conditions<br />
• Made of all stainless steel, finish US32D<br />
• 3/4” wide x 3/4” thick bar<br />
• Unit locks automatically. To release press knob toward <strong>door</strong><br />
while unlatching.<br />
1880 SLIDE BOLT PADLOCK LATCH<br />
Patent Pending<br />
T-Strike<br />
ASA Strike<br />
N1805L Custom Lengths Available<br />
• Special lengths available on request<br />
• Sex bolts available<br />
• Top and bottom strikes available<br />
• With bracket for lock - suffix L lock by others with double lock bracket Suffix DL<br />
• Accepts lock (not provided) with 3/8” max. diameter<br />
shackle and 1-3/4” min. shackle opening height.<br />
28 ABH Manufacturing, Inc. • www.abhmfg.com • 630.875.9900; Fax 800.932.9224<br />
* AvAilAble on TArgeT-1 QuickShip. See inSide cover for deTAilS.<br />
DL<br />
HD1805 Custom Lengths Available<br />
neW!<br />
• 12” (HD1825TB) and 24” (HD1835TB) standard,<br />
custom lengths available<br />
• Sex bolts standard<br />
• Supplied with top and bottom strikes<br />
neW!<br />
• Ideal for lockers and temporary locking situations<br />
• Stainless steel assembly<br />
• Non-handed reversible with built-in fail safe<br />
• Fits standard 160 or 161 prep in 1-3/4” or 1-3/8” <strong>door</strong>s<br />
• Standard T-strike or ASA strike available<br />
• For use with 3/8” diameter padlock (not provided)<br />
• Model 1884 for 2-3/4” backset (161 prep)<br />
• Model 1888 for 2-3/8” backset (160 prep)
Change language