overhead door holders/stops - Architectural Builders Hardware Mfg ...
overhead door holders/stops - Architectural Builders Hardware Mfg ... overhead door holders/stops - Architectural Builders Hardware Mfg ...
CONTINUOUS GEAR HINGES HingeKing Continuous Gear Hinges are all heavy duty. All hinges have double the number of bearings of standard duty hinges and are pinless. There are no accessible screws, bolts or pins when the door is closed. HingeKing gear hinges are surface applied to the frame and door. No machining is required. Whether surface mount or concealed, the HingeKing continuous gear hinges eliminate the gap between the door and frame, and provide a weatherproof, tamper-proof barrier. The HingeKing gear hinge is templated and the hole pattern is the same from hinge to hinge. All units (except A130) are UL Listed. • extruded 6063-T6 aluminum alloy • Polyacetal thrust bearings • 83”, 85”, 95” and 120” are standard – Other sizes available • HingeKing continuous gear hinges are offered in 30 minute clear anodized and 2-step dark bronze anodized • HingeKing gear hinges are non-handed unless cut in the field. When field cut, the hinge becomes handed • #12-24 x 1/2” self-drilling screws standard for concealed hinges. Wood and security screws available. • ABH can provide any custom mounting hole location per customer specifications. FULL CONCEALED A110HD /A110LL * • Concealed • For new construction • For renovation with new doors and/or frames • No mortising of doors or frames required • Will cover butt hinge cutouts in old frames • Flush Mount, no inset • For doors up to 450 lbs. • LL for doors up to 1000 lbs. • 83” can be field cut to 79” without cutting thru a bearing or mounting holes * A111HD /A111LL • Concealed • 1/8” inset • For new construction • For renovation with new doors and/or frames • Will cover butt hinge cutouts in old frames • For doors up to 450 lbs. • LL for doors up to 1000 lbs. • 83” can be field cut to 79” without cutting thru a bearing or mounting holes A130HD SAFeTy HINGe • Used without frame stop • 13/16” leaf clearance • Concealed • For new construction • For renovation with new doors and/or frames • No mortising of doors or frames required • Will cover butt hinge cutouts in old frames • 1/16” inset • For doors up to 450 lbs. • 83” can be field cut to 79” without cutting thru a bearing or mounting holes * A240HD /A240LL • Concealed • For new construction • For renovation with new doors and/or frames • No mortising of doors or frames required. • Will cover butt hinge cutouts in old frames • 3/32” door inset • Door edge Protector • For doors up to 450 lbs. • LL for doors up to 1000 lbs. • 83” can be field cut to 79” without cutting thru a bearing or mounting holes A260HD FOR 2” DOORS • Concealed • For new construction • For renovation with new doors and/or frames • No mortising of doors or frames required • Will cover butt hinge cutouts in old frames • Staggered hole pattern • 3/32” door inset • For doors up to 450 lbs. • 83” can be field cut to 79” without cutting thru a bearing or mounting holes 18 UL listed for all Models (except 130) for the following rated doors: • Swing Type Metal and Wood Doors up to 1 hour without Fire Studs • Swing Type Wood Doors up to 1-1/2 hour with Fire Studs • Swing Type Metal Doors up to 1-1/2 hour without Fire Studs • Swing Type Metal Doors up to 3 hours with Fire Studs UL ® US C UL ® US C UL ® US C UL ® US C ABH Manufacturing, Inc. • www.abhmfg.com • 630.875.9900; Fax 800.932.9224 * AvAilAble on TArgeT-1 QuickShip. See inSide cover for deTAilS.
A270HD/A270LL FOR 2” DOORS • Concealed • For new construction • For renovation with new doors and/or frames • No mortising of doors or frames required • Will cover butt hinge cutouts in old frames • Flush Mount, no inset • For doors up to 450 lbs. • LL for doors up to 1000 lbs. • 83” can be field cut to 79” without cutting thru a bearing or mounting holes A410HD/A410LL SWING CLeAR • Concealed • For new construction • For renovation with new doors and/or frames • No mortising of doors or frames required • Will cover butt hinge cutouts in old frames • Flush Mount, no inset • For doors up to 450 lbs. • LL for doors up to 1000 lbs. • 83” can be field cut to 79” without cutting thru a bearing or mounting holes HALF SURFACE A211HD SWING CLeAR • Half Surface • Frame leaf wrap around for damaged frames • For renovation with new doors and/or frames • No mortising of doors or frames required • Will cover butt hinge cutouts in old frames • 1/32” inset • For doors up to 450 lbs. • 83” can be field cut to 79” without cutting thru a bearing or mounting holes A213HD • For large edge radius or center hung doors or finger guards with long reach • For new construction • For renovation with new doors and/or frames • No mortising of doors or frames required • Will cover butt hinge cutouts in old frames • 3/32” door inset • Door edge Protector • For doors up to 450 lbs. • 83” can be field cut to 79” without cutting thru a bearing or mounting holes A450HD • Half Surface • Frame portion ribbed for proper alignment • For new construction • For renovation with new doors and/or frames • No mortising of doors or frames required • Will cover butt hinge cutouts in old frames • 1/4” door inset • For doors up to 450 lbs. • 83” can be field cut to 79” without cutting thru a bearing or mounting holes A460HD • Half surface • Frame leaf ribbed for proper alignment • 1-15/16” frame leaf • 9/32” inset • For doors up to 450 lbs. • 83” can be field cut to 79” without cutting thru a bearing or mounting holes UL ® US C UL ® US C UL ® US C UL ® US C UL ® US C UL ® US C ABH Manufacturing, Inc. • www.abhmfg.com • 630.875.9900; Fax 800.932.9224 19
- Page 1 and 2: Contents Overhead Door Holders/Stop
- Page 3 and 4: 3300ADJ ADJUSTABLE SeRIeS MeDIUM DU
- Page 5 and 6: FRAME REINFORCEMENTS FOR JAMB BRACK
- Page 7 and 8: 6040 SeRIeS eXIT ONLy PUSH-PULL LAT
- Page 9 and 10: EX, H & X SERIES PUSH-PULL WITH HIP
- Page 11 and 12: 2500 SURFACe WALL MOUNTeD 2600 SING
- Page 13 and 14: 0195 • 3/4” offset • For inte
- Page 15 and 16: INTERMEDIATE PIVOTS Intermediate pi
- Page 17: SCRM 4500 SPECIAL COMBINATION ReSCU
- Page 21 and 22: POWER TRANSFER GEAR HINGES All full
- Page 23 and 24: HALF SURFACE A503 SURFACe MOUNTeD D
- Page 25 and 26: POWER TRANSFER* PT/PTR/PTS105 PT/PT
- Page 27 and 28: MANUAL FLUSH BOLTS Used to lock and
- Page 29 and 30: ROLLER LATCHES ABH Roller Latches a
- Page 31 and 32: HOSPITAL PUSH/PULLS ABH G-J ROCKWOO
A270HD/A270LL FOR 2” DOORS<br />
• Concealed<br />
• For new construction<br />
• For renovation with new <strong>door</strong>s and/or frames<br />
• No mortising of <strong>door</strong>s or frames required<br />
• Will cover butt hinge cutouts in old frames<br />
• Flush Mount, no inset<br />
• For <strong>door</strong>s up to 450 lbs.<br />
• LL for <strong>door</strong>s up to 1000 lbs.<br />
• 83” can be field cut to 79” without cutting thru a bearing or mounting holes<br />
A410HD/A410LL SWING CLeAR<br />
• Concealed<br />
• For new construction<br />
• For renovation with new <strong>door</strong>s and/or frames<br />
• No mortising of <strong>door</strong>s or frames required<br />
• Will cover butt hinge cutouts in old frames<br />
• Flush Mount, no inset<br />
• For <strong>door</strong>s up to 450 lbs.<br />
• LL for <strong>door</strong>s up to 1000 lbs.<br />
• 83” can be field cut to 79” without cutting thru a bearing or mounting holes<br />
HALF SURFACE<br />
A211HD SWING CLeAR<br />
• Half Surface<br />
• Frame leaf wrap around for damaged frames<br />
• For renovation with new <strong>door</strong>s and/or frames<br />
• No mortising of <strong>door</strong>s or frames required<br />
• Will cover butt hinge cutouts in old frames<br />
• 1/32” inset<br />
• For <strong>door</strong>s up to 450 lbs.<br />
• 83” can be field cut to 79” without cutting thru a bearing or mounting holes<br />
A213HD<br />
• For large edge radius or center hung <strong>door</strong>s or finger guards with long reach<br />
• For new construction<br />
• For renovation with new <strong>door</strong>s and/or frames<br />
• No mortising of <strong>door</strong>s or frames required<br />
• Will cover butt hinge cutouts in old frames<br />
• 3/32” <strong>door</strong> inset<br />
• Door edge Protector<br />
• For <strong>door</strong>s up to 450 lbs.<br />
• 83” can be field cut to 79” without cutting thru a bearing or mounting holes<br />
A450HD<br />
• Half Surface<br />
• Frame portion ribbed for proper alignment<br />
• For new construction<br />
• For renovation with new <strong>door</strong>s and/or frames<br />
• No mortising of <strong>door</strong>s or frames required<br />
• Will cover butt hinge cutouts in old frames<br />
• 1/4” <strong>door</strong> inset<br />
• For <strong>door</strong>s up to 450 lbs.<br />
• 83” can be field cut to 79” without cutting thru a bearing or mounting holes<br />
A460HD<br />
• Half surface<br />
• Frame leaf ribbed for proper alignment<br />
• 1-15/16” frame leaf<br />
• 9/32” inset<br />
• For <strong>door</strong>s up to 450 lbs.<br />
• 83” can be field cut to 79” without cutting thru<br />
a bearing or mounting holes<br />
UL<br />
®<br />
US C<br />
UL<br />
®<br />
US C<br />
UL<br />
®<br />
US C<br />
UL<br />
®<br />
US C<br />
UL<br />
®<br />
US C<br />
UL<br />
®<br />
US C<br />
ABH Manufacturing, Inc. • www.abhmfg.com • 630.875.9900; Fax 800.932.9224<br />
19
Change language