MDI Woodcarvers Supply

MDI
Woodcarvers
Supply
2010
USA and Canada Call 800-866-5728
www.mdiwoodcarvers.com

Table of Contents Order Toll Free 800-866-5728
Adhesives Pages 38-39
Angle Grinder Disks Page 34
Bases Page 41
Bill Wrinkle Tool Page 41
Bit Boxes & Bur Holders Page 24
Books Pages 55-61
Brass Tubes, Rods & Sheets Page 44-45
Brushes, Paint Pages 46-47
Burs Bur Holders Page 24
Carbide Burs Pages 28
Diamond Carvers Pages 30-31
Kutzalls Page 36
Ruby Carvers Page 30
Saburr Tooth Burs Pages 32-35
Stump Cutters Page 28
Texturing Stones Page 29
Typhoon Burs Page 34-35
Calipers & Dividers Page 40
Carving Gloves Page 37
Ceramic Texturing Rods Page 29
Colwood Wood Burners Page 22, 23
Dental Probes & Spatulas Page 43
Diamond Carvers Page 30, 31
Dividers Page 40
Dust Collectors Page 37
DVD’s Page 54
Epoxies Page 38-39
Eyes, Glass Page 42
Feet, Cast Bird Page 42-43
Flexible Shaft Machines Page 24
Flexible Shaft Handpieces Page 24-25
Gouges Denny Page 16-18
Dockyard Page 4
Flexcut Pages 5-11, 19-20
Heavy Duty Fixed Handle Page 13
Interchangeable Pages 8-9, 13, 19
Japanese Steel Page 18
Mallet Tools Pages 11, 16
Palm Gouges Pages 8-10, 17-18
Warren Page 13
Iridescent Powders Pages 45
Knives Cape Forge Knives Page 3
Denny Page 16
Draw Knife Page 7
Dunkle, John Knives Page 4
Flexcut Page 6,7
Murphy Knife Page 3
Warren Page 12,13
Mandrels Page 31, 35
Micro-Motor Machines Pages 26
Microplanes Page 14
Optivisors & Opticaids Page 39
Order Form Page 63
Ordering Information Page 62
Paints ChromaColour Page 49
DecoArt Traditions Page 50
Jo Sonja Page 48
Ronan Page 45
Patterns Pages 51-54
Pounce Wheels Page 43
Power Carving Accessories Page 24, 25, 40
Proxxon Power Tools Page 18, 34
Reciprocating Tools Pages 18, 19, 25
Riffler Files & Rasps Page 20
Ruby Carvers Page 30
Rulers Page 40
Safety Items Page 37
Sanding Supplies
Cushioned Sanders Page 20, 35
Drum Sanding Kits Page 35
Marsh Sander Page 37
Mini-Cartridge Rolls Page 27
Swiss Sanding Cloth Page 21
Sanding Disks Page 37
Sanding Drums Page 35
Sanding Files Page 21
Scorps Page 5
Scrapers Page 5
Sealers & Finishes Page 45
Sharpening Supplies Page 14-15
Shop Apron Page 37
Sponge, Painting Page 47
Stump Cutters Page 28
Texturing Paste Page 48
Thumb & Finger Guards Page 37
Tool Rolls Page 20
Transfer Paper Page 41
Wings Gate Patterns Pages 51-54
Wood Burning Units Pages 23-24
Wood Fillers Page 38-39
Cover: Our 2010 Catalog features a pair of harlequin ducks by our good friends
Earl & Sheila Young from Grand Pre, Nova Scotia, Canada
Please Note: MDI Woodcarvers Supply will be closed for the month of July this year. Please take this into account when ordering your summer
carving supplies.
Copyright C 2010 Wayne Edmondson
All rights reserved, including the right to reproduce on whole or in part, in any form, without permission in writing from the copyright holder.
Any unauthorized use of graphics appearing in this catalog will be prosecuted.
The cover photograph was taken by Alan Dorey

Order by Fax: 207-487-3600
Cape Forge Carving Knives
Each knife is hand-forged using fire and anvil, hardened to approximately Rockwell 62. Knives are triple tempered to give
added flexibility and to assure a long-lasting edge. Blades shown actual size.
Their most common knife. A traditional all purpose blade used
in all phases of carving. 54-01 $36.95
The curve of the blade is designed for slicing and concave
cuts, also handy when you don’t want the tip to bite in, such
as tight curves. 54-02 $36.95
The narrow tip allows access to areas you just can’t reach
with other knives. Slightly clipped for strength.
54-03 $36.95
Narrowest at the tip for detailing hollow work. The shape is
also comfortable for thumb control. 54-04 $36.95
A favorite of bird carvers. Tip allows small hollows and does
not get in the way for feathering . 54-04S $36.95
Murphy Carving Knives
An inexpensive way to start carving. Made in the USA. Available in 2 blade lengths.
Carving Knives
A different slant on the basic detail knife. Allows for more
control in some areas. 54-07 $36.95
Great for rounding corners. The tip allows access to spots unreachable
with other blades and works well for stop cuts.
54-08 $36.95
This knife has been enjoyed by many decoy carvers. It works
well for slicing cuts and concave cuts. 54-09 $36.95
A familiar shape for many. Found on jack knives. Great for
hollow cuts and the tip allows for detail work.
54-10 $36.95
An old time design used in places where you need a straight
edge but do not want the tip to bite into your work. Also
known as a “safe edge”. 54-11 $36.95
The narrowness of this blade allows for the smallest of
concave cuts and slicing cuts. 54-12 $36.95
1 1/2” 58-001 $12.95
1 7/8” 58-002 $12.95
Murphy Whittling Knife A great inexpensive whittling knife for classroom situations.
Buy one or save by buying a dozen!
One Whittling Knife 58-WHIT $8.75 each
One Dozen Knives 58-WHDZ $99.00 per doz.
3

Dockyard Micro Carving Tools Order Toll Free 800-866-5728
Dockyard Micro-Carving Tools
Handmade miniature carving tools made in the USA. Each tool is individually tested to insure sharpness and proper cutting
profile. Tools shown actual size! Sold only in sets.
4
1.5mm Micro Carving Set
Set Includes: 1.5mm Deep Plough, 1.5mm Paring,
1.5mm Skew, 1.5mm V-Tool, 1.5mm U-Gouge,
55-115 $37.25
3mm Micro Carving Set
Set Includes: 3mm Deep Plough, 3mm Paring,
3mm V-Tool, 3mm U-Gouge, 3mm Skew
55-103 $37.25
Sculpture Set
Set includes: 2mm paring, 2mm V-Tool,
2mm U-Gouge 3mm U-Gouge, 4mm U-Gouge
55-300 $38.95
Set of 4 “V” Tools
Includes: 1.5mm , 2mm, 3mm &
75 deg “V” tools
55-VSET $34.95
Bench Chisel Set
Includes: 2mm Dogleg, 2.4mm Dogleg,
2.75mm Dogleg, 3.25mm Dogleg
55-BCS $34.95
2mm Micro Carving Set
Set Include: 2mm Deep Plough, 2mm Paring,
2mm Skew, 2mm V-Tool, 2mm U-Gouge
55-102 $37.25
Gouge Set
Set includes: 1.5mm Gouge, 2mm Gouge,
3mm Gouge, 4mm Gouge, 5mm Gouge
55-200 $39.95
Expansion Set
Set Includes: 2.4mm Dogleg, 3.25mm Dogleg, 75
deg. V-Parting tool, 4mm U-Gouge 5mm U-Gouge
55-EXP $37.25
Micro-Knives
Includes: Angle Point,
Hook, Sheep’s Foot
55-400 $33.50

Order by Fax: 207-487-3600
Knives By John Dunkle
John is a second generation knife maker. His knives are razor sharp and hold a terrific edge. All knives are individually
handmade. Though shown full size the knives will vary slightly in size.
33-6ST $34.50
33-8ST $34.50
33-5HP $34.50
33-6HPR $34.50
Dunkle left or right hand Crooked Knife. The right knife would be held in the
right hand and carver would use a pushing motion away from the body.
Right hand push crooked knife
33-5CR $36.50
Dunkle Knives & Flexcut Tools
Left hand push crooked knife
33-5CL $36.50
FlexCut Scorps
These knives are essentially right-angled gouges designed for carving
areas where the full length of the gouge will not fit. Right and left
handed models are available. Right handed carvers - chose a right
handed tool to cut toward you and the left handed to carve away.
Right-Hand
Left-Hand
56-KN21
$21.79
56-KNL21
$21.79
56-KN22
$21.79
56-KNL22
$21.79
56-KN23
$21.79
56-KNL23
$21.79
56-KN24
$22.75
56-KNL24
$22.75
Right or left hand scorp sets include tool roll and all 4 profiles
Right-Hand Scorp Set 56-KN150 $78.25 Left-Hand Scorp Set 56-KNL150 $78.25
Flexcut SK120 Scraper Set
33-7HP $34.50
33-9HP $34.50
33-6HPCH $34.50
33-8CHIP $34.50
Insert into any of the SK Interchangeable
handles, any contour can be used as a
scraping edge. In just a few strokes you can
remove any uneven surface or finish from
your work without the use of sandpaper.
Removes carving and ripple marks as well
as excess glue in hard-to-reach areas.
Handles not included
56-SK120 $39.95
5

Flexcut Knives & Scorps Order Toll Free 800-866-5728
Flexcut Knife Sets
KN100 Knife Set
Set includes a KN12 cutting knife, KN13
detail knife, KN18 pelican knife, KN19
mini-pelican knife and tool roll.
56-KN100 $67.45
Flexcut Interchangeable Gouge Kits (additional interchangeable gouges available on pages 8 & 9)
5 Piece Craft Carver Kit
This entry level tool set comes with an SK100 nylon quick
connect handle and 4 interchangeable blades: SK305,
SK306, SK307 and SK309 in its own 10 pocket took roll.
It also includes a carving/sharpening manual and basswood
project. 56-SK106 $41.35
New! SK 108 Starter Carving Kit
This set consists of 16 “SK” series interchangeable handle Profiles, the KN12 cutting knife, slip strop, gold polishing compound,
SK100 ABS handle and the new SK103 quick connect power handle. 56-SK108 $161.95
Gouges Includes:
5/8” Single Bevel Chisel
9/16” Skew
1/4” #3 Gouge
7/8” #3 Gouge
1/8” #5 Gouge
1/2” #6 Gouge
1/4” #8 Gouge
3/8” #8 Gouge
6
11/16” #8 Gouge
9/16” #9 Gouge
1/16” #11 Gouge
3/16” Thumbnail Gouge
1/2” Thumbnail Gouge
5/32” 45 deg. “V”
3/8” 70 deg. “V”
7/8” Backbent Gouge
Flexcut Carving Jack
Features a straight knife blade, KN26 style hook blade,
3/8” chisel. KN22 style scorp, KN24 style “V” scorp and
3/16” #11 gouge all in one compact folding tool. Includes
a Leather Sheath!
Available in left and right hand versions.
Carvin’ Jack Right Hand Model 56-CJR $115.00
Carvin’ Jack Left Hand Model 56-CJL $115.00
New Detail Knife Set
Set includes a KN19 mini pelican knife,
KN20 mini chip knife and KN27 mini
Detail Knife along with stropping compound
56-KN400 $53.95
New Whittler’s Kit
Includes a KN13 detail knife and a
KN27 mini Detail Knife along with
stropping compound
56-KN300 $35.95
11 Piece Craft Carver Kit
This kit is the same as the SK106 with the exception of
having 10 interchangeable blades. Kit includes the SK100
Handle along with: SK305, SK306, SK307, SK309, SK329,
SK400, SK401, SK408, SK801, and the SK803
56-SK107 $80.95

Order by Fax: 207-487-3600
Flexcut Knives
A quality knife with a hand sharpened razor edge
without paying the price of a hand made knife. Made
with the same steel as the Flexcut gouges. The comfortable
handle allows for long periods of carving without
hand fatigue.
Flexcut Skew Knife 56-KN11 $15.15
Flexcut Cutting Knife 56-KN12 $16.50
Flexcut Detail Knife 56-KN13 $17.50
Flexcut Rough-out Knife 56-KN14 $18.95
FlexCut Hook Knives
Available in both right and left hand models, allows carvers to work in hollows
with ease. Left or right model designated by pulling the tool toward carver.
Right Hand Model List Price $24.95 56-KN26 $23.70
Left Hand Model List Price $24.95 56-KN26L $23.70
Flexcut 5” Draw Knife
Flexible draw knife has a 5” workable edge, designed to
flex around contours where large amounts of stock needs to
be removed quickly. The tool can be flexed to accommodate
concave or convex surfaces. 56-DK5 $37.95
Flexcut Carving Knives
Flexcut Chip Carving Knife 56-KN15 $17.05
FlexcutPelican Knife 56-KN18 $17.05
Mini Knives from Flexcut
The Flexcut Mini knives feature ultra thin blades for the
lowest resistance when fine cutting is required. Facets on
the smaller handles create multiple control points to allow
them to be held in a variety of comfortable positions.
Flexcut Mini Pelican Knife 56-KN19 $21.75
Flexcut Mini Chip Knife 56-KN20 $19.89
Flexcut Mini Detail Knife 56-KN27 $21.75
Actual size cutting edge view
Right hand version
New FlexCut 3 inch Draw Knife
Developed for Fan Carving but works great for skinning bark
or rounding-off corners. At around a foot in length, this tool
fits nicely into a tool box.
56- KN25 $31.29
Order on Line at www.mdiwoodcarvers.com
7

Flexcut Palm & Interchangeable Gouges
5” Flexcut Palm gouges are available in both fixed and interchangeable
styles. Please note Fixed Handle tools with an asterix
will be sent with the 4-1/2” power handle for better control of
the larger profile.
Handled tools come with a fixed, ergonomic, ash, handle.
Unhandled tools are interchangeable, via a quick connection
with a number of handle styles. They can also be used in a variety
of reciprocating power carvers.
#1 Chisels Single Bevel
Fixed Palm Handle Interchangeable (No Handle)
1/4” (6mm) 56-FR329 $16.10 56-SK329 $11.35
3/8” (9mm) 56-FR316 $14.75 56-SK316 $9.99
1/2” (13mm) 56-FR441 $16.10 56-SK441 $11.35
5/8” (16mm) 56-FR406 $15.15 56-SK406 $10.40
7/8” (22mm) 56-FR705 $16.10 56-SK705 $11.35
1-1/8” (28mm)
#2 Skews Double Bevel
56-LH901 $18.95 *
Fixed Palm Handle
56-SK901 $12.30
Interchangeable (No Handle)
5/16” (8mm) 56-FR308 $14.75 56-SK308 $9.99
9/16” (15mm) 56-FR407 $15.15 56-SK407 $10.40
#3 Sweeps
Fixed Palm Handle Interchangeable (No Handle)
1/8” (3mm) 56-FR600 $15.45 56-SK600 $10.70
1/4” (6mm) 56-FR323 $15.45 56-SK323 $10.70
3/8” (9mm) 56-FR305 $14.75 56-SK305 $9.99
1/2” (13mm) 56-FR443 $16.10 56-SK443 $11.35
5/8” (16mm) 56-FR400 $16.10 56-SK400 $11.35
7/8” (22mm) 56-FR700 $17.05 56-SK700 $12.30
#5 Sweeps
1-1/8” (28mm) 56-LH903 $21.80 *
Fixed Palm Handle
56-SK903 $15.15
Interchangeable (No Handle)
2.5mm (Micro) 56-FR802 $17.05 56-SK802 $12.30
1/8” (3mm) 56-FR601 $15.45 56-SK601 $10.70
9/16” (14mm) 56-FR401 $16.10 56-SK401 $11.35
#6 Sweeps
1-1/16” (28mm) 56-LH905 $21.80 *
Fixed Palm Handle
56-SK905 $15.15
Interchangeable (No Handle)
1/4” (6mm) 56-FR426 $16.10 56-SK426 $11.35
5/16” (8mm) 56-FR306 $14.75 56-SK306 $9.99
1/2” (12mm) 56-FR446 $16.10 56-SK446 $11.35
#8 Sweeps
#9 Sweeps
8
13/16” (20mm)
*
56-FR701 $17.05 56-SK701 $12.30
1” (26mm) 56-LH906 $21.80 56-SK906 $15.15
Fixed Palm Handle Interchangeable (No Handle)
1/4” (6mm) 56-FR428 $16.10 56-SK428 $11.35
3/8” (10mm) 56-FR402 $16.10 56-SK402 $11.35
11/16” (17mm)
7/8” (22mm)
1mm (micro)
1.5mm (micro)
9/16” (14mm)
*
56-FR702 $17.05 56-SK702 $12.30
56-LH908 $21.80 56-SK908 $15.15
Fixed Palm Handle Interchangeable (No Handle)
56-FR800 $17.05 56-SK800 $12.30
56-FR801 $17.05 56-SK801 $12.30
56-FR703 $17.05 56-SK703 $12.30

Flexcut Palm & Interchangeable Gouges & Handles
#11 Sweeps
1/16” (2mm)
1/8” (3mm)
3/16” (5mm)
1/4” (7mm)
#11X Thumbnail Gouges
3/16” (5mm)
5/16” (8mm)
3/8” (10mm)
1/4” (7mm)
Parting Tools
5/32” x 30o V (4mm)
1mm x 45o V (micro)
5/32” x 45o V (4mm)
1/4” x 45o V (6mm)
1/2” x 60o Soft V (12mm)
1/8” x 70o V (3mm)
Fixed Palm Handle Interchangeable (No Handle)
56-FR602 $15.45 56-SK602 $10.70
56-FR309 $14.75 56-SK309 $9.99
56-FR409 $16.10 56-SK409 $11.35
56-FR408 $16.10 56-SK408 $11.35
Fixed Palm Handle Interchangeable (No Handle)
56-FR725 $17.05 56-SK725 $12.30
56-FR925 $18.00 56-SK925 $13.25
56-FR926 $18.95 56-SK926 $14.20
56-FR927 $20.85 56-SK927 $16.10
Fixed Palm Handle Interchangeable (No Handle)
56-FR413 $18.00
56-FR317 $16.40
56-FR412 $17.60
56-FR760 $18.00
56-FR603 $16.40
56-SK413 $13.25
56-FR803 $18.00 56-SK803 $13.25
56-SK317 $11.65
56-SK412 $12.85
56-SK760 $13.25
56-SK603 $11.65
1/4” x 70o V (6mm) 56-FR307 $16.10 56-SK307 $11.35
3/8” x 70o V (9mm) 56-FR403 $16.65 56-SK403 $11.90
5/8” x 70o V (15mm)
5/8” x 90
56-LH970 $23.70
56-FR706 $18.00
56-SK970 $17.05
o V (15mm)
56-SK706 $13.25
1” x 110o *
Lettering V (25mm) 56-LH910 $22.75 *
7/16”Macaroni (11mm) 56-FR735 $18.00
56-SK910 $16.10
56-SK735 $13.25
Back Bent Gouges
Fixed Palm Handle Interchangeable (No Handle)
1-1/8” (28mm)
56-FR954 $20.85 56-SK954 $16.10
7/8” (22mm)
56-FR754 $18.95 56-SK754 $14.20
Spoon Gouges
5/8” (16mm)
9/16” (14mm)
56-FR453 $17.05 56-SK453 $12.30
56-FR455 $18.00 56-SK455 $13.25
7/16” (12mm) 56-FR458 $18.95 56-SK458 $14.20
1/8” x 45 56-FR367 $17.05 56-SK367 $12.30
3/8” (9mm)
56-FR361 $16.65 56-SK361 $11.90
1/8” (3mm)
56-FR364 $17.60 56-SK364 $12.85
7/16” (12mm) 56-FR451 $17.60 56-SK451 $12.85
o Fixed Palm Handle Interchangeable (No Handle)
V (3mm)
SK103 Quick Connect Power Handle
The power handle offers versatility for carvers who want to use two hands for
better control or to apply pressure. It is also for those with large hands or for light
mallet use . 56-SK103 $13.25
Flexcut Wooden SK102 Handle
New quick connect palm handle for the “SK series of gouges. Gouge not
included. 56-SK102 $13.25
FlexCut SK100 ABS Handle
The yellow, soft urethane, provides for an
exceptional grip. Accepts all FlexCut “SK”
series tools 56-SK100 $13.25
9

Flexcut Palm Sets
Flexcut Micro Palm Tool 4 Pc. Set
#9 x 1mm #9 x 1.5mm
#5 x 2.5mm 1mm X 45o “V”
Includes Wooden Box 56-FR804 $56.65
Flexcut Mini Palm Tool 4 Pc. Set
Flexcut Regular Palm Tool 5 Pc. Set
Flexcut Wide Palm Tool 4 Pc. Set
10
#3 x 1/8” #5 x 1/8”
#11 x 1/16” #1/8” x 70 O “V”
Includes Wooden Box 56-FR604 $53.95
#2 x 3/8”
#6 x 3/8”
5/16” Skew
Includes Wooden Box 56-FR310 $62.95
#3 x 5/8”
1/4” x 80 o “V”
1/8” Veiner
#5 x 5/8”
#8 x 3/8” #3/8” x 70 O V
Includes Wooden Box 56-FR404 $53.95
Super Wide Palm Tool 4 Pc. Set
#3 x 7/8”
#8 x 5/8”
#7 x 3/4” #9 x 1/2”
Includes Wooden Box 56-FR704 $58.45
FlexCut Long Handled Extreme Set
Order Toll Free 800-866-5728
1-1/8” (28mm) 1-1/16” (28mm)
7/8” (22mm)
1” x 110 o Lettering V (25mm)
Set of 4 Flexcut Extreme Tools listed above with Wooden Box
56-LH904 $62.95
Order on Line at www.mdiwoodcarvers.com

Order by Fax: 207-487-3600
#1 Chisel
56-MC201 1/2” (12mm) $21.80
56-MC301 3/4” (18mm) $23.70
56-MC401 1” (25mm) $24.65
56-MC501 11 / ” (31mm) 4 $25.60
#2 Skews
56-MC202 1/2” (12mm) $21.80
56-MC302 3/4” (18mm) $23.70
56-MC402 15/16” (23mm) $24.65
56-MC502 1-3/16” (30mm) $25.60
#3 Gouges
56-MC203 1/2” (12mm) $22.35
56-MC303 3/4” (18mm) $23.70
56-MC403 1” (25mm) $25.90
56-MC503 1 1 / 4 ” (31mm) $28.45
56-MC803 2” (50mm) $37.95
#5 Gouges
56-MC205 1/2” (12mm) $22.35
56-MC305 11/16” (17mm) $24.25
56-MC405 15/16” (23mm) $26.55
56-MC505 1-3/16” (28mm) $28.45
56-MC605 1-3/8” (45mm) $30.35
#7 Gouges
56-MC208 7/16” (11mm) $22.35
56-MC307 11/16” (17mm) $24.65
56-MC407 15/16” (23mm) $26.85
56-MC507 1-1/8” (28mm) $28.45
56-MC807 1-3/4” (45mm) $40.80
#8 Gouges
56-MC408 13/16” (20mm) $27.10
56-MC708 1-5/16” (33mm) $37.00
#9 Gouges
56-MC209 1/4” (6mm) $22.75
56-MC309 1/2” (12mm) $24.65
56-MC409 3/4” (18mm) $26.85
56-MC509 15/16” (23mm) $28.75
56-MC809 1-3/8” (35mm) $42.70
#10 Sweeps
56-MC411 9/16” (14mm) $28.05
56-MC511 3/4” (19mm) $28.95
56-MC711 1-1/8” (28mm) $37.95
#11 Gouges
56-MC211 1/8” Gouge (3mm) $23.30
56-MC311 1/4” Gouge (6mm) $25.20
Flexcut Mallet Tools
90o V-Tools
60o 56-MC290 5/16” (5mm) $23.70
56-MC390 1/2” (12mm) $25.90
56-MC490 11/16” (17mm) $28.45
56-MC590 13/16” (20mm) $30.90
56-MC890 1-3/8” (35mm) $39.85
V-Tools
45o 56-MC260 3/16” (5mm) $23.70
56-MC360 3/8” (9mm) $26.15
56-MC460 1/2” (12mm) $28.95
56-MC560 5/8” (15mm) $31.60
56-MC860 1” (25mm) $40.80
V-Tools
56-MC245 3/16” (5mm) $24.65
56-MC345 1/4” (6mm) $27.50
56-MC445 3/8” (9mm) $30.35
56-MC545 9/16” (11mm) $32.80
6 Piece Basic Mallet Set
The FlexCut Basic Mallet Set includes the following tools:
MC403, MC305, MC208, MC311, MC411, MC360. Set
also includes a wooden storage box.
56-MC150 $130.45
10 Piece Deluxe Mallet Set
Includes the following mallet tools: MC203, MC403,
MC505, MC307, MC309, MC211, MC311, MC511,
MC245, MC460. Includes wooden box.
56-MC100 $224.95
4 Piece Sculptor’s Mallet Set
Set includes the following tools: MC803, MC605, MC711,
MC890, Set also includes a wooden storage box.
56-MC175 $112.45
11

Warren Handles & Blades
Warren 3-Way Interchangeable Handles
The 3-way brass jaw allows the carver to use it with both
small and large Warren blades as well as interchangeable
palm gouges. For the price conscious, the 50-HB3 features
a plastic handle. The 50-CWH2, CWH3, and the PGH pencil
grip handle features walnut handles.
50-HB3 Standard Plastic Handle $11.50
50-CWH3 Standard Walnut Handle $13.50
50-CWH2 Small Walnut Handle $13.50
50-PGH Pencil Grip Handle $13.50
Warren Detail Handle
Detail handle only holds the small blades and allows less
interference than 3-way jaw for close work.
50-JW3 $13.50
Warren Lock-Jaw Handle
The same as the 3-way brass jaw with the additional feature
of being able to tighten down with the included wrench.
Standard Walnut Lock-Jaw 50-CWH3L J $15.50
Lock-Jaw Palm Handle 50-L JP $15.50
Warren Interchangeable Blades
All Warren blades are sold razor sharp and fit the Warren
3-way brass jaws of their interchangeable handles.
NOTE: Blades are shown smaller than actual size
Large Blades
1/2” x 3” x .050” thick, made of high carbon steel. These
are strong blades recommended for carving soft, as well as
the hardest wood. Plastic capsuled. They do not fit in JW
series handles. $4.79 each
50-LS1
50-LD2
50-LN3
50-LS4
50-LK5
50-LW6
Small Blades
5/16” x 2 1/4” long. Made of cutlery tool steel for more
resiliency, hard enough to hold an edge without being brittle.
They fit in all Warren interchangeable handles.
50-8B Pack of 3 $3.65
50-10B Pack of 3 $3.65
50-11B
50-20EX Pack of 3 $3.65
50-21EX Pack of 3 $3.65
50-22B
New Warren Blades
We are offering two new blades from Warren. The 50-24EX will add to
their small blade selection and comes 3 to a package. 50-LS2N is a Large
blade and is sold individually. Shown at 80% of actual size.
12
50-LS2N $4.79 each
50-24EX 3 pack $3.65
Order Toll Free 800-866-5728
Pack of 3 $3.65
Pack of 3 $3.65
50-6SBL 1 Each of the above blades $6.99
Warren Bent Blades
Small Right Hand Bent 50-SRH $5.25
Small Left Hand Bent 50-SLH $5.25
Large Right Hand Bent 50-LRH $6.25
Large Left Hand Bent 50-LLH $6.25

Order by Fax: 207-487-3600
Warren Gouges & Sets
Warren Interchangeable Palm Gouges
Warren Interchangeable gouges are made of high carbon tool steel, custom forged and hand-honed to a sharp edge. These
gouges will fit any Warren 3-way brass jaw or lock-jaw handle that we offer. (50-L JP recommended).
50-SBG
$9.50
50-LBG
$9.50
Warren Interchangeable Blade Kits
COMBI M97 KIT
Warren’s most popular kit! This 10 piece kit features everything
you need to get started. 6 small blades, 1 large blade,
2 gouges and a walnut handle. Features a quality hard shell
case! 50-CBM97 $39.95
COMBI T4 KIT
If you are looking for a more complete
kit, this one will fit the bill. The Combi T4
features all the tools shown above as well
as a vinyl covered metal case that is built
to last. This compact case will fit into your
coat pocket conveniently for taking to classes or
for carving on the road.
50-COMBIT4 $76.50
3/4” Fishtail Gouge
57-FTG $13.50
3/4” Round End Fishtail
57-FTR $13.95
50-SKU
$9.50
50-STG
$9.50
50-STC
$9.50
50-PTV1
$11.75
50-PTV2
$14.25
COMBI LJ197 KIT
This kit features the lock-jaw walnut handle and wrench,
along with 6 small blades, 1 large blade and 2 gouges and
a quality hard shell case. 50-CBL97 $41.95
Heavy Duty Fixed Handle Gouges
These heavy duty, straight handled, high carbon steel, fish tail gouges are great for quick wood removal.
50-SFTG
$9.50
13

Microplanes
Razor-sharp, stainless steel Microplanes are for rapid smoothing and
shaping of wood. They feature extremely sharp teeth for fast, smooth, low
effort cutting. They are durable, non-clogging and rust resistant.
Microplane 8” Snap-In Tool
Snap-In Microplane Tools have replaceable, reversible blade inserts
which may be turned for use on the push or pull stroke. The handle is
made of glass filled nylon for added stability and measures 14-7/8” in
length and 1-3/8” wide. Each stainless steel replacement blade is 8”
long and 1” wide.
Microplane 8” Snap-In Tool with the coarse flat blade
26-32000 $10.95
Microplane 8” Snap-In Tool with both fine and coarse flat blades
26-32015 $16.50
Universal Handle Replacement Blade Inserts
Coarse Round Insert 1”x 8” Blade 26-32001 $8.50
Coarse Angle Insert 1”x 8” Blade 26-32002 $8.50
Fine Flat Insert 1”x 8” Blade 26-32003 $8.50
Fine Round Insert 1”x 8” Blade 26-32004 $8.50
Fine Angle Insert 1”x 8” Blade 26-32005 $8.50
Sharpening Supplies
14
Order Toll Free 800-866-5728
Fine Tooth
Actual Size
Coarse Tooth
Actual Size
The 3” Snap-In Microplane
Replaceable, reversible blade insert design. Changing the blades is done without tools by firmly “snapping” the old blade out
and the new back in. The addition of the finger rest adds increased pressure control. The handle is made of glass filled nylon
and measures 9” in length and 1-1/8” in width. Each stainless steel replacement blade is 3” long and 3/4” wide.
Microplane 3” Snap-In Tool with
coarse flat insert 26-32016 $7.95
3” Replacement Blades
Coarse Round Insert 26-32018 $5.95
Coarse Angle Insert 26-32019 $5.95
Fine Flat Insert 26-32020 $5.95
Fine Round Insert 26-32021 $5.95
Fine Angle Insert 26-32022 $5.95
3” Flat Insert 3” Round Insert 3” Angle Insert
The Original Powerstrop
Consists of a 3 1/2” flat leather stropping wheel, a steel mandrel
and a bar of aluminum oxide 50-PSK $18.95
V-Strop Powerstrop Kit
Consists of a 3 1/2” leather wheel for sharpening V-tools,
mandrel and aluminum oxide. 50-PSKV $18.95
Deluxe Powerstrop Kit
Consists of both flat and V-stropping wheels, 2 mandrels and a
bar of aluminum oxide. 50-PSKD $31.25

Order by Fax: 207-487-3600
EZE-LAP Diamond Sharpeners
EZE-Lap offers the flattest most consistant production tools
available on the market and are entirely made in the USA.
These 600 grit diamond sharpeners quickly brings a tool to
a keen edge.
Small hand held sharpening stone with plastic handle
52-LF $5.50
2.75” x 1” diamond surface mounted on a walnut paddle
52-24F $10.50
6” x 2” diamond surface mounted on a walnut block
52-62F $28.50
FlexCut SlipStrop & Polishing Compound
This 3 1/4” x 4” SlipStrop is for polishing and deburring the
hard to reach areas on the inside of V-tools and gouges as
well as the outside edge bevel. FlexCut Gold compound has
been specially formulated to apply to the strop like a crayon
and quickly polish hardened steel. Together they create a
sharp edge not possible with traditional “slip stones”.
SlipStrop & Compound 56-PW12 $12.25
Additional compound 56-PW11 $5.99
Sharpening Supplies
Double Faced Leather Strop
Made from high quality 10 oz. leather. Use
to maintain a razor sharp edge on your knife.
Includes vial of aluminum oxide powder.
85-LS $16.50
Additional aluminum oxide powder
85-AOP $2.99
Tri Hone
Fine, Medium and Coarse grit on a rotating wood block.
Comes with honing oil. Two sizes to chose from.
4” Tri Hone 50-003 $19.50
6” Tri Hone 50-004 $27.50
Deluxe Honing Kit
Comes with 5” x 1 1/2 x 1/2” soft Arkansas stone mounted
on a cedar block and a 4” x 1” x 1/2” hard Arkansas stone
with honing oil. 50-002 $15.50
Honing Oil
3 oz. bottle of honing oil to use on stones or leather to keep a
keen edge on your tools 50-OIL $2.50
Stropping Compounds
JMZ Green compound 1/4 lb. 85-GREEN $5.50
Peachy’s Keen Edge Stropping Compound
Pink colored compound is a favorite amongst carvers.
Available in 1/2 lb. tube. 85-PEACH $9.95
15

Denny Knives
Denny knives and gouges are made of the finest O1 tool
steel. The back edge of the knife blade has been rounded
to allow for ease of cutting through the wood. The knives
and gouges come sharpened and ready to carve. Denny is
no longer riviting his tools as seen in photos. Tools with rivits
are limited to inventory on hand.
Denny 1/2” Skew Knife 52-50-SKEW $19.50
Denny 1” Straight Knife 52-1SK $19.25
Denny 1-1/4” Small Hand Straight Knife
52-1-2SHK $19.25
Denny 1-1/2” Straight Knife 52-1-4SK $20.25
Denny 1-7/8” Straight Knife 52-1-7SK $20.25
Denny 2-1/4” Straight Knife 52-2-2SK $21.25
Denny 2-1/4” Bishop Str. Kn. 52-2-2BSK $20.25
Denny 1-1/4” Detail Knife 52-1-2DK $20.25
Denny 1/2” Angled Mini Detail Knife
52-AMDK $19.25
16
Order Toll Free 800-866-5728
Denny 3/4” Mini Detail Knife 52-75MDK $19.25
Denny 1” Mini Detail Knife 52-1MDK $19.25
Denny 1/4” Skew Eye Detail Knife 52-EYEDT $20.25
Denny 2” Detail Knife designed by Dennis Thornton
52-DTDK $20.25
Denny 1/2” Mini Chip Knife 52-50MCCK $19.25
Denny 1” Chip Carving Knife 52-1CCK $20.25
New! Denny Mallet Tools
Tools are pressed from 1” wide stock. Available in 6
different shapes and feature 6” handles.
#3 Mallet tool 52-3MT $28.95
#5 Mallet tool 52-5MT $28.95
#7 Mallet tool 52-7MT $28.95
#9 Mallet tool 52-9MT $28.95
Skew Mallet tool 52-SKMT $28.95
“V” Mallet tool 52-VMT $28.95
Actual widths will be listed on web as soon
as they are available

Order by Fax: 207-487-3600
Denny Gouges
Denny #1 Chisels
1/8” x #1 Chisel 52-18-1SG $21.25
1/4” x #1 Chisel 52-25-1SG $21.25
3/8” x #1 Chisel 52-38-1SG $21.25
1/2” x #1 Chisel 52-50-1SG $21.25
3/4” x #1 Chisel 52-75-1SG $22.25
1” x #1 Chisel 52-1WH-1SG $24.25
Denny #3 Straight Gouges
1/8” x #3 Gouge 52-18-3SG $21.25
1/4” x #3 Gouge 52-25-3SG $21.25
3/8” x #3 Gouge 52-38-3SG $21.25
1/2” x #3 Gouge 52-50-3SG $21.25
3/4” x #3 Gouge 52-75-3SG $22.25
1” x #3 Wood Hawg 52-1WH-3SG $24.25
Denny #3 Bent Gouges
1/8” x #3 Bent 52-18-3SGB $22.25
1/4” x #3 Bent 52-25-3SGB $22.25
3/8” x #3 Bent 52-38-3SGB $22.25
1/2” x #3 Bent 52-50-3SGB $22.25
3/4” x #3 Bent 52-75-3SGB $23.25
Denny #5 Straight Gouges
1/4” x #5 Gouge 52-25-5SG $21.25
3/8” x #5 Gouge 52-38-5SG $21.25
1/2” x #5 Gouge 52-50-5SG $21.25
3/4” x #5 Gouge 52-75-5SG $22.25
1” x #5 Wood Hawg 52-1WH-5SG $24.25
Denny #5 Bent Gouges
1/2” x #5 Bent Gouge 52-50-5SGB $21.75
3/4” x #5 Bent Gouge 52-75-5SGB $22.75
Denny #7 Straight Gouges
3/8” x #7 Gouge 52-38-7SG $21.25
1/2” x #7 Gouge 52-50-7SG $21.25
3/4” x #7 Gouge 52-75-7SG $22.25
Denny #7 Bent Gouges
1/2” x #7 Bent Gouge 52-50-7SGB $22.25
3/4” x #7 Bent Gouge 52-75-7SGB $23.25
Denny #9 Straight Gouges
3/8” x #9 Gouge 52-38-9SG $21.25
1/2” x #9 Gouge 52-50-9SG $21.25
5/8” x #9 Gouge 52-625-9SG $22.25
Denny #11 Veiner “U” Gouges
2mm x #11 Gouge 52-2MMG $21.25
4mm x #11 Gouge 52-4MMG $21.25
6mm x #11 Gouge 52-6MMG $21.25
Order on Line at www.mdiwoodcarvers.com
17

Gouges & Reciprocating Carver
Denny 5/16 inch “V” Gouge 52-516-VG $20.75
Denny 5/8” wide “V” gouge with 3” blade
designed by Pete Ortel 52-PO-VG $23.75
Skew Left
Long side on left
18
Skew Right
Long side on right
Warren Japanese Steel Tools
These tools are hardened to a Rockwell 64 for a
long lasting edge life and easy sharpening!
1.5mm “V” Tool
50-LV15 $7.25
3.0mm “V” Tool
50-LV30 $7.25
4.5mm “V” Tool
50-LV45 $7.25
1.5mm #8 Gouge
50-815 $7.25
Proxxon SGM Reciprocating Carver
Order Toll Free 800-866-5728
Denny 5/8” wide “V” gouge with 2” blade. Dave Stenson
modified Pete Ortel’s “V”-gouge saying the 2” blade gave
him better control, yet he switches back to the 3” “V”-gouge
when his knuckles don’t have enough clearance going around
corners. 52-DS-VG $23.75
Denny #3 Skew Bent Gouges with 4 1/2” Oak Handles
1/4” x #3 Skew Bent Left 52-25-3SGBL $22.25
1/4” x #3 Skew Bent Right 52-25-3SGBR $22.25
3/8” x #3 Skew Bent Left 52-38-3SGBL $22.25
3/8” x #3 Skew Bent Right 52-38-3SGBR $22.25
1/2” x #3 Skew Bent Left 52-50-3SGBL $22.25
1/2” x #3 Skew Bent Right 52-50-3SGBR $22.25
3.0mm #8 Gouge
50-830 $7.25
4.5mm #8 Gouge
50-845 $7.25
6mm #8 Gouge
50-860N $7.25
7.5mm #8 Gouge
50-875N $7.25
7.5mm Chisel
50-CH75N $7.25
9mm Shallow Gouge
50-SH9N $7.25
9mm #3 Gouge
50-390N $7.25
7.5mm Skew
50-SK75N $7.25
This quality German made unit features 11,000 cuts per minute, is 9.4 inches in length and weighs just 1.5 pounds without
blades. Casing is made from fiberglass reinforced polyamide with a cast aluminum gear housing. It contains multiple ball
bearings and thrust bearing. Three laminated steel gouges are included. It will also use the FlexCut RG series gouges featured
on the next page without any adapters. 25-SGM $135.00