Transmission Efficiency of plastic Films Part 1

More documents

Recommendations

Info

TRANSMISSION EFFICIENCY OF PLASTIC FILMS 58
6.1 Introduction to Adhesives: ADHESIVES TRANSMISSION EFFICIENCY OF PLASTIC FILMS A material capable of fastening two other materials together by means of surface attachment. The terms glue, mucilage, mastic, and cement are synonymous with adhesive. In a generic sense, the word adhesive implies any material capable of fastening by surface attachment, and thus will include inorganic materials such as Portland cement and solders. In a practical sense, however, adhesive implies the broad set of materials composed of organic compounds, mainly polymeric, which can be used to fasten two materials together. The materials being fastened together by the adhesive are the adherents, and an adhesive joint or adhesive bond is the resulting assembly. Adhesion is the physical attraction of the surface of one material for the surface of another. The phenomenon of adhesion has been described by many theories. The most widely accepted and investigated is the wet ability-adsorption theory. This theory states that for maximum adhesion the adhesive must come into intimate contact with the surface of the adherent. That is, the adhesive must completely wet the adherend. This wetting is considered to be maximized when the intermolecular forces are the same forces as are normally considered in intermolecular interactions such as the vander Waals, dipole-dipole, dipole-induced dipole, and electrostatic interactions. Of these, the vander Waals force is considered the most important. The formation of chemical bonds at the interface is not considered to be of primary importance for achieving maximum wetting, but in many cases it is considered important in achieving durable adhesive bonds. The greatest growth in the development and use of organic compound-based adhesives came with the application of synthetically derived organic polymers. Broadly, these materials can be divided into two types: thermoplastics and thermosets. Thermoplastic adhesives become soft or liquid upon heating and are also soluble. Thermoset adhesives cure upon heating and then become solid and insoluble. Those adhesives which cure under ambient conditions by appropriate choice of chemistry are also considered thermosets. Pressure-sensitive adhesives are mostly thermoplastic in nature and exhibit an important property known as tack. That is, pressure-sensitive adhesives exhibit a measurable adhesive strength with only a mild applied pressure. Pressure-sensitive adhesives are derived from elastomeric materials, such as polybutadiene or polyisoprene. Structural adhesives are, in general, thermosets and have the property of fastening adherends that are structural materials (such as metals and wood) for long periods of time even when the adhesive joint is under load. Phenolic-based structural adhesives were among the first structural adhesives to be developed and used. The most widely 59
Page 2 and 3:
Transmission efficiency of Plastic
Page 4 and 5:
C O N T E N T S S. No. CHAPTERS Pag
Page 6 and 7:
The strategy for the project, TRANS
Page 8 and 9:
TRANSMISSION EFFICIENCY OF PLASTIC
Page 10 and 11:
Bags and Sacks 22% Bags and sacks 2
Page 12 and 13:
2.1 EXTRUSION OF FILM: TRANSMISSION
Page 14 and 15: TRANSMISSION EFFICIENCY OF PLASTIC
Page 20 and 21: Film casting (slit-die extrusion):
Page 30 and 31: Note We are examining the National
Page 38 and 39: 6. GENERAL FOOD PACKAGING: TRANSMIS
Page 42 and 43: NYLONS: TRANSMISSION EFFICIENCY OF
Page 52 and 53: PAKISTAN: TRANSMISSION EFFICIENCY O
Page 72 and 73: 4. ANTI-STATIC ADDITIVES TRANSMISSI
Page 76 and 77: Butyl, GRS, polyurethane, neoprene
show all

Transmission Efficiency of plastic Films Part 1

Create successful ePaper yourself

Delete template?

Save as template?