This Rigger's Handbook is dedicated to Theodore C - Igor Chudov

More documents

Recommendations

Info

Manual Hoists - LHH LHH HAND CHAIN HOIST Coffing LHH Models - Stamped steel hand chain hoists are an excellent low cost option in the Coffing line. The compact, lighweight design is ideal for construction and contractor applications where portability and easy rigging are critical. • Capacities and Lift - Rated loads from 1/2 to 20 tons in stock with standard lifts of 10, 15 and 20 feet. Standard hand chain drop is 2 feet less than lift. Other lifts and hand chain drops, and 25 - 50 Ton models available - Please contact Hanes Supply for details. • Compact and Light Weight - Designed for portability and easy installation. Compact gear housing provides low headroom. • Easy to Operate - Lubricated bearings and bushings, bearing mounted pinions, and heat-treated spur gearing ensure smooth and efficient operation with minimal effort. • Safety and Load Control - Mechanical load brake engages instantly for precise load holding and positioning. 360 degree swivel hooks with safety latches for positive load engagement. • Durable - Through-hardened load chain provides added strength and wear resistance for greater chain life. Stamped steel housing withstands rugged conditions. • Easy to Maintain - Designed for easy maintenance. Hoist can be dismantled easily with simple hand tools. • Lifetime Warranty. STRANDS MINIMUM AVG. NET PULL WT. FOR CAPACITY OF HEAD- OVERHAUL TO LIFT 10 FT. LIFTS LOAD ROOM FOR 1 FT. RATED LIFT (LBS) (TONS) MODEL† (FT)** CHAIN (IN) LIFT (FT) LOAD (LBS) (LBS) 1,000 1/2 LHH-1/2 10/15/20 1 10-1/4 32 55 19 2,000 1 LHH-1 10/15/20 1 11-13/16 56 53 25 3,000 1-1/2 LHH-1-1/2 10/15/20 1 13-9/16 75 65 36 4,000 2 LHH-2 10/15/20 1 15 75 74 45 6,000 3 LHH-3 10/15/20 1 17-1/8 95 84 66 10,000 5 LHH-5 10/15/20 3 22-5/8 203 79 75 16,000 8 LHH-8 10/20 3 32-1/2 312.5 77 158 20,000 10 LHH-12 10/20 3 32-1/2 312.5 95 158 24,000 12 LHH-12 10/20 5 50-5/8 526 84 328 30,000 15 LHH-15 10/20 5 50-5/8 526 103 328 40,000 20 LHH-20 10 6 52-3/8 312.5 x 2 † 99 x 2 † 535 50,000 25* LHH-25 10 8 52-7/8 416.7 x 2 † 97 x 2 † 680 60,000 30* LHH-30 10 10 65 526.3 x 2 † 104 x 2 † 945 80,000 40* LHH-40 10 14 73-5/16 714.3 x 2 † 104 x 2 † 1,400 100,000 50* LHH-50 10 20 77-5/8 1000 x 2 † 104 x 2 † 1,840 *25, 30, 40 and 50 ton models available by special order - contact Hanes Supply for more details. **Standard lifts shown. Other lifts available - contact Hanes Supply for more details. † LHH-20 through LHH-50 models have two hand chains. NOTE: Please contact Hanes Supply for complete dimensional data. HEADQUARTERS: 55 James E. Casey Drive • Buffalo, NY 14206 PHONE: 716.826.2636 FAX: 716.826.4412 www.hanessupply.com 62 YOUR SLING AND RIGGING SPECIALIST 1/4 to 50 Ton Capacity
YOUR SLING AND RIGGING SPECIALIST Powered Chain Hoists - Lodestar CM LODESTAR ELECTRIC CHAIN HOIST The balanced, integrated, proven design of the Lodestar has made it the most popular electric chain hoist in the industry. Lodestar gives you more value for your money including: • Up to 3 ton capacities for heavy-duty industrial applications. • Gear train lifetime lubricated with non-oxidizing grease. • Precision machined and hardened liftwheel with hardened chain guides for precise chain liftwheel fit. • Grearing designed for exceptionally long life and quiet operation. • H4 duty standard. • Rugged control station (NEMA 4). • Hoist duty motor, standard Protector overload device and standard screw type limit switches. • Hardened, forged steel, latch type hooks and Hoistaloy load chain for long, dependable service. • Easy to install and maintain. Plain Trolley Hook Suspension HEADQUARTERS: 55 James E. Casey Drive • Buffalo, NY 14206 PHONE: 716.826.2636 FAX: 716.826.4412 www.hanessupply.com 63 • No special tools required to disassemble. • High reliability and long life. • Designed for greater productivity, efficiency and economy. • Lifetime warranty. • Each hoist thoroughly inspected and tested to over 125% of rated load prior to shipment. • Meets ASME B30.16. • Made in U.S.A. Special Applications • Harsh environment hoists available for severe duty of plating, galvanizing and washdown applications. • Hoists with climbing capability available for temporary rigging of lifting applications – must be used in inverted position only. • Hoists with creep control allow precise positioning through field adjustment within the range of approximately 1/16" to 1/2". Motorized
Page 2 and 3:
This Rigger’s Handbook is dedicat
Page 4 and 5:
Table of Contents Hooks, Synthetic
Page 6 and 7:
Innovative Lifting Solutions TWIN-P
Page 8 and 9:
Twin-Path ® Slings TWIN-PATH ® SL
Page 10 and 11:
Twin-Path ® Covermax Slings (Polye
Page 12 and 13:
Twin-Path ® Eye and Eye Sling TWIN
Page 14 and 15: Twin-Path ® Adjustable Bridle The
Page 16 and 17: Wear Pads and Cut Protectors Wear p
Page 18 and 19: Twin-Path ® Slings in Action TWIN-
Page 20 and 21: Twin-Path ® Slings 7.14 Portions o
Page 22 and 23: Twin-Path ® Slings K-Spec core yar
Page 24 and 25: Single-Path Round Slings SINGLE PAT
Page 26 and 27: Tri-Flex ® Sling Engineering PIN S
Page 28 and 29: Tri-Flex ® Sling System Engineerin
Page 30 and 31: Gator-Laid ® Cable-Laid Slings Ins
Page 32 and 33: Gator-Flex ® Slings T&D Ultra-Flex
Page 34 and 35: Gator-Flex ®/Twin-Flex ® Grommets
Page 36 and 37: Mechanical Splice Flemish Eye Sling
Page 38 and 39: Grommet Slings CABLE LAID GROMMET W
Page 40 and 41: 2 Leg Wire Rope Bridles No. 200 Ser
Page 42 and 43: 4 Leg Wire Rope Bridles No. 400 Ser
Page 44 and 45: Chain Sling Assembly GRADE 80 CHAIN
Page 46 and 47: Chain Slings The life and strength
Page 48 and 49: Chain Sling Saddle Rings ALLOWS ADJ
Page 50 and 51: Chain Slings - Grade 80 Alloy Safet
Page 52 and 53: Load Binders LOAD BINDER WARNINGS A
Page 54 and 55: Lebus ® Load Binders STANDARD RATC
Page 56 and 57: Nylon Web Slings BASIC SLING TYPES
Page 58 and 59: Nylon Web Slings 5.3 - ENVIRONMENTA
Page 60 and 61: Polyester Ratchet Assembly TRUCKER
Page 62 and 63: Manual Hoists - Puller CM PULLER CM
Page 66 and 67: Wire Mesh Slings LIKE A GIANT HAND.
Page 68 and 69: Rope Slings MANILA ROPE SLINGS Tabl
Page 70 and 71: Rope Specifications ROPE SPECIFICAT
Page 72 and 73: Winch Lines GUIDELINES FOR THE USE
Page 74 and 75: Winch Lines CLEANING Sometimes util
Page 76 and 77: MSI Products The MSI-7200 Dyna-Link
Page 78 and 79: Hilman Rollers 1. How much does the
Page 80 and 81: Wire Rope Clips CROSBY CLIP WARNING
Page 82 and 83: Master Link MASTER LINK • Alloy S
Page 84 and 85: Alloy Bolt-Type Shackles NOM. WORKI
Page 86 and 87: Alloy Shackles "WIDE BODY" SLING SA
Page 88 and 89: Synthetic Sling Hook WEB SLING HOOK
Page 90 and 91: Hoist Hooks S-319 SHANK HOOKS SEE A
Page 92 and 93: Sling and Hoist Hooks S-320 EYE HOO
Page 94 and 95: Clevises Material: C-1035 and SA-18
Page 96 and 97: Chain Hooks M806A CM ALLOY CLEVIS T
Page 98 and 99: Wedge Sockets "THE TERMINATOR" Cros
Page 100 and 101: Hook & Hook Turnbuckles HG-223 HOOK
Page 102 and 103: Eye & Eye Turnbuckles HG-226 EYE &
Page 104 and 105: Wire Rope Thimbles STANDARD WIRE RO
Page 106 and 107: Spelter Sockets G-416 GROOVED OPEN
Page 108 and 109: Open Swage Sockets E B F L A N OPEN
Page 110 and 111: Swage Buttons / Socket Compound •
Page 112 and 113: Right Eye Bolts More than one eye b
Page 114 and 115:
Eye Bolts A E G F H SEE APPLICATION
Page 116 and 117:
Hoist Rings ACTEK SWIVEL (SAFETY) H
Page 118 and 119:
Lifting Clamps IPUZ vertical liftin
Page 120 and 121:
Swivels S-1 JAW & HOOK S-3 JAW & EY
Page 122 and 123:
Swaged Sockets In mechanically swag
Page 124 and 125:
Wire Rope ROTATION RESISTANT WIRE R
Page 126 and 127:
Wire Ropes ABRASION RESISTANCE FATI
Page 128 and 129:
Wire Ropes INSPECTION - THE KEY TO
Page 130 and 131:
Wire Ropes COMMON WIRE ROPE ABUSES
Page 132 and 133:
Wire Ropes While there is a possibi
Page 134 and 135:
Wire Ropes ROPE STRENGTH AND DESIGN
Page 136 and 137:
Basic Lift Engineering EFFECT OF AN
Page 138 and 139:
General Information In reeving a pa
Page 140 and 141:
General Information The Rated Load
Page 142 and 143:
General Information DEFINITIONS Rat
Page 144 and 145:
Lift Engineering FINDING THE HYPOTE
Page 146 and 147:
USA Standard Crane Hand Signals Use
Page 148:
One of the foremost leaders in the
show all

This Rigger's Handbook is dedicated to Theodore C - Igor Chudov

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?