This Rigger's Handbook is dedicated to Theodore C - Igor Chudov

More documents

Recommendations

Info

Manual Hoists - Puller CM PULLER CM Puller is designed for heavy-duty construction and industrial applications. Used to pull, lift, drag or stretch, it features: • Tough aluminum alloy construction and powder coat finish. • Weatherproof for outdoor service. • Simple construction with fewer parts for ease of maintenance. • Hoistaloy hardened steel link type load chain for strength, long wear life and flexibility. • Weatherized Weston-type automatic braking system for positive load control. • Easy, one-hand operation and control — only 58 pounds of pull required for 3/4 ton model capacity. • Forged upper and lower hooks with latches standard. • Easy one-hand operation. • Lever pull range is 45 to 62 pounds to lift full load. • Handle that rotates 360O, making it easy to operate in any position and in small spaces. • Tough yet lightweight aluminum construction and powder coat finish. •CM ® Hoistaloy ® hardened steel load chain for strength, long wear life and flexibility. • Free wheeling for fast and easy attachment to load. • Upper and lower Latchlok hooks available for all capacities. • Optional Load Limiter protection device stops transmission of lever forces protecting against dangerous overload. • Optional anchor sling simplifies attachment to allow anchor hook to swivel in tight space applications (3/4 & 1-1/2 ton units only). • Optional Load Sentry warns of overload condition. • Optional shorter lever for 3/4 and 1-1/2 ton units available. • Optional zinc-plated chain available. • Unlimited lift. • Lifetime warranty. • Made in U.S.A. PULL TO MINIMUM HOOK APPROX. RATED STD. LIFT FULL DISTANCE LEVER THROAT SHIPPING CAPACITY PROD. LIFT† LOADS BETWEEN LENGTH OPENINGS WEIGHT (TONS) CODE (FT) (LBS) HOOKS (IN) (IN) REEVING (IN) (LBS) 3/4 4043 5 58 10-3/4 21-1/4 1 1-1/32 16 1-1/2 4045 5 89 14-1/4 21-1/4 1 1-1/8 16 3 4047 5 95 16-15/16 21-1/4 2 1-7/32 38 6 4050 5 96 21-3/8 21-1/4 4 1-3/4 73 † Can be supplied with lifts longer than 5 feet CM SHORT HANDLE PULLER • Free chaining for fast, easy attachment to load. • Forged upper and lower hooks with latches. • Simple construction with fewer parts for ease of maintenance. • Optional Load Limiter ® device protects against overload • Lifetime warranty • Made in U.S.A. PULL TO HOOK MIN. APPROX. RATED STD. LIFT FULL LEVER THROAT DISTANCE SHIPPING CAPACITY PRODUCT LIFT LOAD LENGTH OPENING BETWEEN WT. (TONS) CODE (FT) REEVING (LBS) (IN.) (IN) HOOKS (IN) (LBS) 3/4 7300P 5 1 45 12 1-1/32 12-1/4 16 1-1/2 7320P 5 1 55 16-3/4 1-1/8 14-3/4 27 3 7330P 5 2 62 16-3/4 1-3/16 17-5/8 40 Optional kits also available - Load Limiter, Anchor Sling & Latchlok ® Hook. Call Hanes Supply for complete details. HEADQUARTERS: 55 James E. Casey Drive • Buffalo, NY 14206 PHONE: 716.826.2636 FAX: 716.826.4412 www.hanessupply.com 60 YOUR SLING AND RIGGING SPECIALIST Optional Load Limiter Latchlok type hook 3/4 ton Puller Shown Also available in 1-1/2 & 3 ton capacity 3/4 ton Puller Shown Also available in 1-1/2, 3 & 6 ton capacity Optional Load Security Optional anchor sling (3/4 & 1-1/2 ton)
YOUR SLING AND RIGGING SPECIALIST CM CYCLONE HAND CHAIN HOIST One of the most popular and reliable hoists ever designed, the CM Cyclone combines superior engineering, efficiency and durability. Available in a variety of capacities from 1/4 ton to 10 tons, CM Cyclone features: • Most interchangeability of parts in the industry. • Standard Load Limiter for simple, automatic overload protection. • Enclosed contoured Weston-type automatic brake for positive load control. • High-efficiency spur gearing for greater lift with minimum effort. • Rugged CM Hoistaloy chain for added strength and durability. • Fully machined, forged liftwheel pickets for easier lifting and smooth free chaining. HEADQUARTERS: 55 James E. Casey Drive • Buffalo, NY 14206 PHONE: 716.826.2636 FAX: 716.826.4412 www.hanessupply.com 61 Manual Hoists - Cyclone MINIMUM CHAIN RATED STANDARD DISTANCE OVERHAULED CHAIN PULL SHIPPING CAPACITY PRODUCT LIFT † BETWEEN TO LIFT LOAD TO LIFT FULL WEIGHT (TONS) CODE (FT.) REEVING HOOKS (IN.) ONE FOOT (FT.) (LBS.) (LBS.) 1/4 4621 8 1 12-7/8 22-1/2 23 37 1/2 4622 8 1 12-7/8 22-1/2 46 37 1 4624 8 1 14 30 69 40 1-1/2 4625 8 1 17-5/16 40-1/2 80 65 2 4626 8 1 17-5/16 52 83 64 3 4627 8 2 21-1/2 81 85 96 4 4628 8 3 21-1/2 104 88 96 5 4629 8 3 24-1/4 156 75 128 6 4630 8 3 25-1/4 156 90 132 8 4631 8 4 34-1/2 208 89 235 10 4632 8 5 35-1/2 260 95 249 † Can be supplied with longer lifts 3 and 4 Ton Capacity 5 and 6 Ton Capacity • High-strength aluminum alloy castings in frame and covers. • Inspected over 75 times to meet or exceed HMI and ASME/ANSI performance and safety standards. • Standard hand chain drop is 2 feet less than lift, (example: 8 foot lift hoist has 6 foot hand chain drop). • Chain containers, zinc-plated load and hand chain, aluminum unwelded hand chain, Latchlok hooks, bronze hooks, eye-type suspension, bullard hooks and units without Load Limiter optional, depending on capacity. • Lifetime warranty. • Made in U.S.A. 8 Ton Capacity 10 Ton Capacity 1/4 to 2 Ton Capacity Hanes Supply 25 Ton Capacity Test Stand
Page 2 and 3:
This Rigger’s Handbook is dedicat
Page 4 and 5:
Table of Contents Hooks, Synthetic
Page 6 and 7:
Innovative Lifting Solutions TWIN-P
Page 8 and 9:
Twin-Path ® Slings TWIN-PATH ® SL
Page 10 and 11:
Twin-Path ® Covermax Slings (Polye
Page 12 and 13: Twin-Path ® Eye and Eye Sling TWIN
Page 14 and 15: Twin-Path ® Adjustable Bridle The
Page 16 and 17: Wear Pads and Cut Protectors Wear p
Page 18 and 19: Twin-Path ® Slings in Action TWIN-
Page 20 and 21: Twin-Path ® Slings 7.14 Portions o
Page 22 and 23: Twin-Path ® Slings K-Spec core yar
Page 24 and 25: Single-Path Round Slings SINGLE PAT
Page 26 and 27: Tri-Flex ® Sling Engineering PIN S
Page 28 and 29: Tri-Flex ® Sling System Engineerin
Page 30 and 31: Gator-Laid ® Cable-Laid Slings Ins
Page 32 and 33: Gator-Flex ® Slings T&D Ultra-Flex
Page 34 and 35: Gator-Flex ®/Twin-Flex ® Grommets
Page 36 and 37: Mechanical Splice Flemish Eye Sling
Page 38 and 39: Grommet Slings CABLE LAID GROMMET W
Page 40 and 41: 2 Leg Wire Rope Bridles No. 200 Ser
Page 42 and 43: 4 Leg Wire Rope Bridles No. 400 Ser
Page 44 and 45: Chain Sling Assembly GRADE 80 CHAIN
Page 46 and 47: Chain Slings The life and strength
Page 48 and 49: Chain Sling Saddle Rings ALLOWS ADJ
Page 50 and 51: Chain Slings - Grade 80 Alloy Safet
Page 52 and 53: Load Binders LOAD BINDER WARNINGS A
Page 54 and 55: Lebus ® Load Binders STANDARD RATC
Page 56 and 57: Nylon Web Slings BASIC SLING TYPES
Page 58 and 59: Nylon Web Slings 5.3 - ENVIRONMENTA
Page 60 and 61: Polyester Ratchet Assembly TRUCKER
Page 64 and 65: Manual Hoists - LHH LHH HAND CHAIN
Page 66 and 67: Wire Mesh Slings LIKE A GIANT HAND.
Page 68 and 69: Rope Slings MANILA ROPE SLINGS Tabl
Page 70 and 71: Rope Specifications ROPE SPECIFICAT
Page 72 and 73: Winch Lines GUIDELINES FOR THE USE
Page 74 and 75: Winch Lines CLEANING Sometimes util
Page 76 and 77: MSI Products The MSI-7200 Dyna-Link
Page 78 and 79: Hilman Rollers 1. How much does the
Page 80 and 81: Wire Rope Clips CROSBY CLIP WARNING
Page 82 and 83: Master Link MASTER LINK • Alloy S
Page 84 and 85: Alloy Bolt-Type Shackles NOM. WORKI
Page 86 and 87: Alloy Shackles "WIDE BODY" SLING SA
Page 88 and 89: Synthetic Sling Hook WEB SLING HOOK
Page 90 and 91: Hoist Hooks S-319 SHANK HOOKS SEE A
Page 92 and 93: Sling and Hoist Hooks S-320 EYE HOO
Page 94 and 95: Clevises Material: C-1035 and SA-18
Page 96 and 97: Chain Hooks M806A CM ALLOY CLEVIS T
Page 98 and 99: Wedge Sockets "THE TERMINATOR" Cros
Page 100 and 101: Hook & Hook Turnbuckles HG-223 HOOK
Page 102 and 103: Eye & Eye Turnbuckles HG-226 EYE &
Page 104 and 105: Wire Rope Thimbles STANDARD WIRE RO
Page 106 and 107: Spelter Sockets G-416 GROOVED OPEN
Page 108 and 109: Open Swage Sockets E B F L A N OPEN
Page 110 and 111: Swage Buttons / Socket Compound •
Page 112 and 113:
Right Eye Bolts More than one eye b
Page 114 and 115:
Eye Bolts A E G F H SEE APPLICATION
Page 116 and 117:
Hoist Rings ACTEK SWIVEL (SAFETY) H
Page 118 and 119:
Lifting Clamps IPUZ vertical liftin
Page 120 and 121:
Swivels S-1 JAW & HOOK S-3 JAW & EY
Page 122 and 123:
Swaged Sockets In mechanically swag
Page 124 and 125:
Wire Rope ROTATION RESISTANT WIRE R
Page 126 and 127:
Wire Ropes ABRASION RESISTANCE FATI
Page 128 and 129:
Wire Ropes INSPECTION - THE KEY TO
Page 130 and 131:
Wire Ropes COMMON WIRE ROPE ABUSES
Page 132 and 133:
Wire Ropes While there is a possibi
Page 134 and 135:
Wire Ropes ROPE STRENGTH AND DESIGN
Page 136 and 137:
Basic Lift Engineering EFFECT OF AN
Page 138 and 139:
General Information In reeving a pa
Page 140 and 141:
General Information The Rated Load
Page 142 and 143:
General Information DEFINITIONS Rat
Page 144 and 145:
Lift Engineering FINDING THE HYPOTE
Page 146 and 147:
USA Standard Crane Hand Signals Use
Page 148:
One of the foremost leaders in the
show all

This Rigger's Handbook is dedicated to Theodore C - Igor Chudov

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?