29.09.2012 Views

Programm Photovoltaik Ausgabe 2009 ... - Bundesamt für Energie BFE

Programm Photovoltaik Ausgabe 2009 ... - Bundesamt für Energie BFE

Programm Photovoltaik Ausgabe 2009 ... - Bundesamt für Energie BFE

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Département fédéral de l’environnement,<br />

des transports, de l’énergie et de la communication DETEC<br />

Office fédéral de l’énergie OFEN<br />

CENTRALE DI TEST ISAAC-TISO<br />

QUALITÀ E RESA ENERGETICA DI MODULI<br />

FOTOVOLTAICI<br />

Annual Report 2008<br />

Author and Co-Authors D. Chianese, N. Cereghetti, A. Realini, G. Friesen, E. Burà,<br />

I. Pola, T. Friesen, Roman Rudel<br />

Institution / Company Scuola Universitaria Professionale della Svizzera Italiana SUPSI,<br />

DACD, Istituto di Sostenibilità Applicata all’Ambiente Costruito<br />

ISAAC-TISO<br />

Address Via Trevano, CH – 6952 Canobbio<br />

Telephone, E-mail, Homepage +41 (0) 58 666 63 56; domenico.chianese@supsi.ch;<br />

www.isaac.supsi.ch<br />

Project- / Contract Number 36508 / 153027<br />

Duration of the Project (from – to) 01.11.2007 - 31.12.2010<br />

Date December 2008<br />

ABSTRACT<br />

During 2008 more than 6140 flashes were performed for research programmes (test centre and other<br />

projects), I-V measurements for third-parties and maintenance measurements (accreditation maintenance).<br />

A total of 458 I-V measurement, 18 determination of the temperature coefficients, 15 I-V<br />

characterization at different irradiances (200, 400, 600 and 800 W/m²), 11 outdoor initial degradation<br />

(30-60 kWh/m²) and 72 I-V determination with multiflash method were performed for third-parties.<br />

In October 2008 the eighth quality audit, for the ISO17025 accreditation maintenance, supervised by<br />

the Swiss Accreditation Service, was successfully passed. The accreditation of the I-V measurements<br />

at different irradiances has been postponed in order to conform the laboratory to the new version<br />

(2008) of the IEC 60904-3 standard. In particular, a new procedure for the irradiance uniformity verification<br />

with two special reference modules and electronics have been designed.<br />

The spectrale response (SR) measurement with automate filter positioning and data acquisition will<br />

be implemented with the new Pasan IIIB sun simulator. A solution, in collaboration with two industrial<br />

partner, consisting in a composition of two CCD spectroradiometers sensitive in ranges 200-1100nm<br />

and 900-1700nm respectively, was selected for the monitoring of the flash spectrum of the sun simulator<br />

In 2008 a new 15 months test cycle (no.11) began. Thirteen different module types were chosen, in<br />

an attempt to include the greater part of available technologies: 4 mc-Si (one with EWT backcontact),<br />

4 sc-Si, 1 HIT (new version), 1 a-Si/a-Si tandem module, 1 a-Si/µc-Si (micromorph) and 2 CIS.<br />

In test cycle 11 the power at the purchase of crystalline silicon technologies (including HIT) was on<br />

average -2.6% lower with respect to Pn but ranging from +0.5% to -10.5%. In 8 of 27 cases power at<br />

purchase was outside production tolerance.<br />

In order to built the test stand for outdoor measurements comparison of the ER for industry, 60pcs of<br />

the new MPPT3000 have been produced.<br />

201/290

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!