Programm Photovoltaik Ausgabe 2009 ... - Bundesamt für Energie BFE

More documents

Recommendations

Info

3/4 Work and results Launch of a 2 month internship at Solaronix of Mr. Robin Cisneros from University Nantes (France), to learn the manufacturing of test dye solar cells in the monolithic configuration. Prepare publication at the Symposium "Trends in Organic Electronics and Hybrid Photovoltaics" held at Eforie Nord, Romania, June 12-14 2008. Improved cost calculation for a 20 MWp production line of “Monolithic” Dye Solar Cells. This improved cell construction allows for rapid and cost effective production of large area dye solar cell modules, as it is based on printing techniques for all layers. Only one transparent conductive coated glass is required as substrate. The calculation shows that a production cost of 1 €/Wp is achievable at a scale of 20MWp yearly production, the materials expenditure (TCO glass, chemicals, junction box + frame) make up 2/3 of the total manufacturing costs. A cooperation with Pr. Andreas Luzzi at the Swiss Engineering School SPF in Rapperswil was launched and a first (confidential) functional prototype of a dye solar cell module was delivered for evaluation in an electronic product. 2 other projects are in preparation for demanding indoor applications in the field of small household appliances. A cooperation contract was entered with a large Swiss chemicals company to develope the dye solar cell & modules in the "monolithic" configuration, allowing for substantial cost savings in materials and production methods. National and international collaboration Cooperation in the field of organic solar cells happens through these ongoing projects FP6-IP: NAPOLYDE, website: www.napolyde.org CCEM-CH project thinPV, website http://thinpv.empa.ch/members/index.html New FP7 RTD programs (granted, to start begin 2009) : "INNOVASOL" – coordinated by Prof. Leonardo Marchese at the Centro Interdisciplinare Nano- SISTEMI Università del Piemonte Orientale, Italy. This project deals with improving the dye solar cell with a solid state electrolyte or a hole conductor, and the currently used metal-organic dye shall be replaced with quantum dots. "SOLAMON" – coordinated by Dr. Nathalie Baclet at the CEA-Grenoble, France. SOLAMON focuses on improving "3rd generation" thin film solar cells (a-Si and dye sensitized) by employing plasmon generating materials to improve light collection in the active layers. "SOLHYDROMICS" - coordinated by Prof. Guido Saracco at the Politecnico Torino, Italy. This project aims to build a photoelectrochemical water splitting device based on organic (or biological) catalysts for light collection (PSII system) and hydrogen evolution materials without noble metals. "ORION" – coordinated by Dr. David Mecerreyes at the CIDETEC, San Sebastian, Spain. This project investigates the development of a new family of functional inorganic-organic hybrid materials (for example metal oxide – ionic liquid) characterized by an ordered morphology. Solaronix works together with Novacis SA, a « spin-out » company developing printed CIGS solar cells together with Total, France. Solaronix is again an Eureka-Partner in the project E!4413 LCSC together with 3Gsolar (ex- OrionSolar), in Jerusalem, Israel. ORGAPVNET, T. Meyer, Solaronix 143/290
Evaluation 2008 and Outlook 2009 L'année 2008 a été caractérisée par la soumission de 4 projets de recherche au 7 ème Programme Cadre (FP7), tous finalement couronnés par le succès du "funding". Ces 4 projets démarrent en 2009. En outre, l'alliance avec un grand groupe de l'industrie chimique Suisse permettra de lancer la production des cellules solaires à colorant dans un avenir proche. Pour 2009, c'est l'année de la réalisation de ces nouveaux projets servant au développement des cellules solaires à colorant, tant qu'au niveau fondamental pour en améliorer le rendement, tant qu'au "scale-up" des modules solaires à une taille de 30x30 cm. References www.orgapvnet.eu www.napolyde.org www.fullspectrum-eu.org http://thinpv.empa.ch/members/index.html ORGAPVNET, T. Meyer, Solaronix 144/290 4/4
Page 1:
Forschung, April 2009 Programm Phot
Page 4 and 5:
Programm Photovoltaik Ausgabe 2009
Page 6 and 7:
B. Ruhstaller, R. Häusermann, N. A
Page 8 and 9:
PROGRAMM PHOTOVOLTAIK Eidgenössisc
Page 10 and 11:
1. Programmschwerpunkte und anvisie
Page 12 and 13:
Eine zweite Kategorie von Projekten
Page 14 and 15:
Im Integrierten EU-Projekt ATHLET [
Page 16 and 17:
Figur 3: Prototyp eines monolithisc
Page 18 and 19:
SOLARMODULE UND GEBÄUDEINTEGRATION
Page 20 and 21:
BEGLEITENDE THEMEN Das PSI beteilig
Page 22 and 23:
Programme abgeschlossen. Die erste
Page 24 and 25:
Messkampagnen - Messkampagne Wittig
Page 26 and 27:
zielführend eingesetzt werden. Das
Page 28 and 29:
[43] P. Renaud, L. Perret, (pierre.
Page 30:
11. Verwendete Abkürzungen (inkl.
Page 33 and 34:
D. Güttler, S. Bücheler, S. Seyrl
Page 35 and 36:
Goals of the project The global pro
Page 37 and 38:
1.2. Comparison of ZnO and SiOx int
Page 39 and 40:
2. Processes 2.1. Microcrystalline
Page 41 and 42:
3.2. Amorphous/amorphous silicon ta
Page 43 and 44:
Fig.14: TEM cross section microcrys
Page 45 and 46:
EQE 1.0 0.8 0.6 0.4 0.2 12.4 11.7 1
Page 47 and 48:
4.7 Summary and perspectives for wo
Page 49 and 50:
Acknowledgements We thank all the P
Page 51 and 52:
Goals of the project The goals of t
Page 54 and 55:
Eidgenössisches Departement für U
Page 56:
3/3 on the front side. All the laye
Page 59 and 60:
Introduction / Project Goals Prior
Page 62 and 63:
Page 64 and 65:
3/4 Effective light trapping scheme
Page 66 and 67:
Département fédéral de l’envir
Page 68 and 69:
3/6 The Athlet consortium comprises
Page 70 and 71:
5/6 Large area thin-film silicon ce
Page 72 and 73:
Page 74 and 75:
3/4 Der verbesserte Lichteinfang is
Page 76 and 77:
Page 78 and 79:
3/5 Results Microstructure characte
Page 80:
5/5 Mechanical testing: The mechani
Page 83 and 84:
Introduction / Project goals The fo
Page 85 and 86:
Optimization of CdS chemical bath d
Page 87 and 88:
Fig. 5: J-V curve (left) and extern
Page 90 and 91:
Page 92 and 93:
3/7 Work performed and results achi
Page 94 and 95:
5/7 Fig. 3: Raman spectra recorded
Page 96: 7/7 Measurements of solar cells per
Page 99 and 100: Introduction / project objectives T
Page 101 and 102: Optimum Na dosage Sodium layer with
Page 103 and 104: application might become more impor
Page 105 and 106: In a second experiment the amount o
Page 108 and 109: Eidgenössisches Departement für U
Page 110 and 111: 3/9 After optimizing the In2S3 buff
Page 112 and 113: 5/9 Indium sulfide layer characteri
Page 114 and 115: 7/9 3) Semitransparent CIGS solar c
Page 116: 9/9 Steps towards multi-junction so
Page 121 and 122: Figure 2: SEM picture of laser-abla
Page 125 and 126: Work progress and achievements duri
Page 127 and 128: Furthermore, with a good reproducib
Page 129 and 130: Main achievements - The association
Page 131 and 132: Introduction Dye-sensitized solar c
Page 136 and 137: 3/4 So far, experiments were perfor
Page 140 and 141: 3/5 Tasks of the collaboration part
Page 142: 5/5 Figure 4: Maximum achievable sh
Page 145: Project Goals The goal is the estab
Page 149 and 150: Project Goals NAPOLYDE industrials
Page 151 and 152: � Organic large solar panel and
Page 153 and 154: Materials such as the conductive ca
Page 155 and 156: National and international collabor
Page 157 and 158: Project Goals The aim of FULLSPECTR
Page 159 and 160: In addition, every two years, the P
Page 161 and 162: The table below show the change of
Page 163 and 164: The table below shows the change of
Page 165 and 166: 4. The UV-A tests with PMMA films c
Page 167 and 168: Introduction / Project Goals The co
Page 169 and 170: Fig. 4. Schematic illustration of a
Page 172 and 173: THINPV Eidgenössisches Departement
Page 174 and 175: 3/6 IR laser source Pumping line IR
Page 176 and 177: 5/6 Figure 2: Scheme of a monolithi
Page 178 and 179: PECNET Eidgenössisches Departement
Page 180 and 181: 3/10 Projektziele Dieses Forschungs
Page 182 and 183: 5/10 und mit Stichworten katalogisi
Page 184 and 185: 7/10 einer Vorverpflichtung mit rel
Page 186 and 187: 9/10 NanoPEC Partner IEA HIA Annex
Page 188: Module und Gebäudeintegration T. S
Page 191 and 192: Einleitung / Projektziele Obwohl be
Page 194 and 195: ULTRALIGHT PHOTOVOLTAIC STRUCTURES
Page 196 and 197:
3/8 Task 2. Encapsulation of Si-bas
Page 198 and 199:
5/8 Figure 9: polyester/glass fiber
Page 200 and 201:
7/8 Figure 16: Flexible DSCmodule F
Page 202:
Systemtechnik D. Chianese, N. Cereg
Page 205 and 206:
Aim of the project The aim of the
Page 207 and 208:
The short circuit current of each P
Page 209 and 210:
TEST cycle 11 In 2008 a new 15 mont
Page 211 and 212:
Evaluation 2008 and prospects for 2
Page 213 and 214:
1. Traceable performance measuremen
Page 215 and 216:
formed with two standard halogen la
Page 217 and 218:
3. Modelling and analysis (SP4) 3.1
Page 219 and 220:
Figure 3 shows a summary of the RR
Page 221 and 222:
Projektziele für 2008 � Fortfüh
Page 223 and 224:
Interessant ist die Beobachtung, da
Page 225 and 226:
Wechselrichtertests Im Bereich der
Page 227 and 228:
Stress limits for bypass diodes for
Page 229 and 230:
Objectives SoS-PV (Security of Supp
Page 231 and 232:
Finally, strategies for demand side
Page 233 and 234:
~ Mains terminal Synchronisation &
Page 235 and 236:
International collaboration SoS-PVi
Page 238 and 239:
Page 240 and 241:
The cumulative installed PV power i
Page 242:
5/5 Workshops Grid Parity & Beyond
Page 245 and 246:
Einleitung / Projektziele Die Ziele
Page 247 and 248:
Dank der Projektdatenbank vom Task
Page 249 and 250:
Nationale und internationale Zusamm
Page 251 and 252:
Einleitung Anfangs 2008 konnte die
Page 253 and 254:
Das Verfahren für Projektanträge
Page 255 and 256:
Skizze - nicht eintreten 13% Gesuch
Page 257 and 258:
Community Based Rural Income throug
Page 259 and 260:
Licht für Bildung und Entwicklung
Page 262 and 263:
Département fédéral de l’envir
Page 264 and 265:
3/6 SOUS-TÂCHE 2 « PLANIFICATION,
Page 266 and 267:
5/6 Conformément au plan de travai
Page 268 and 269:
Page 270 and 271:
3. Durchgeführte Arbeiten und erre
Page 272 and 273:
kg/m2 7 6 5 4 3 2 1 0 Fassadenaufst
Page 274 and 275:
Page 276 and 277:
3/5 Table 2: Sites used for benchma
Page 278:
5/5 Figure 2: Example of forecasted
Page 281 and 282:
2/6 Einleitung / Projektziele Der r
Page 283 and 284:
4/6 Die Technical Standards (TS) zu
Page 285 and 286:
6/6 Im Jahr 2008 neu publizierte No
Page 287 and 288:
Introduction and Goals PV ERA NET i
Page 289 and 290:
Operational Level The networking ac
Page 291 and 292:
Topical Areas: Complementarities, G
Page 293:
International Cooperation According
show all

Programm Photovoltaik Ausgabe 2009 ... - Bundesamt für Energie BFE

Create successful ePaper yourself

Delete template?

Save as template?