Locked spindle rivets - Peerless Aerospace Fastener Corp
Locked spindle rivets - Peerless Aerospace Fastener Corp
Locked spindle rivets - Peerless Aerospace Fastener Corp
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CHERRYLOCK RIVET TOOLING<br />
38<br />
ADAPTERS AND EXTENSIONS<br />
226 ADAPTER<br />
This adapter converts the screw-on heads H615B<br />
or H642 (15 series) to the snap-on type necessary<br />
to fit the G55 Hand Riveter.<br />
680B46 ADAPTER<br />
This adapter fits all Cherry Hydroshift Riveters to permit<br />
the use of H615B or H642 (15 series). It also permits the use<br />
of G6H, H80 and H9015 pulling heads for installation of<br />
“MS” style <strong>rivets</strong>.<br />
680B57 ADAPTER<br />
This adapter fits all Cherry Hydroshift Riveters to permit<br />
the use of H640B and H642 (40 series) for the installation<br />
of Cherrylock Rivets. It also permits the use of H40, H90<br />
and H9040 pulling heads for the installation of “MS” style<br />
<strong>rivets</strong>.<br />
G6H EXTENSIONS<br />
These extensions help reach many restricted installation spots by<br />
increasing the overall length of the pulling head. They fit directly on<br />
Cherry G56A Riveters and will accept any of the screw-on type pulling<br />
heads such as G6H, H80, H9015, H615B. Standard extensions are<br />
the G6HEA-2, which is 2” long and G6HEA-4, which is 4” long.<br />
Special lengths can be made to order.