Locked spindle rivets - Peerless Aerospace Fastener Corp

CHERRYLOCK ®
RIVET TOOLING
G685B-S & G686B-S LIMITED ACCESS POWER RIVETERS
DESCRIPTION
The Cherry G685B-S & G685B-S Split Cherrylock Riveters are designed
specifically for the easiest and most efficient installation of
Cherrylock Rivets. In using these “split” tools, the power unit
rests on the floor and transmits its power through 8 feet of hose
to a light-weight pistol-grip handle; this facilitates rivet installation
in many limited access areas and also greatly reduces
operator fatigue.
The G685B-S and G686B-S Riveters operate on 90 to 125 psi of air
pressure at the tool and differ in capacity as follows:
G685B-S.............................1 1/16" stroke.......................2460 lbs. pull
G686B-S.............................1 9/16" stroke.........................2460 lbs. pull
The difference in stroke determines the size and style of rivets
that can be installed with these riveters. See Tool Selection Chart
on Page 28 for complete capacity information.
PULLING HEADS
Pulling heads are not furnished with these tools but must be
ordered separately. In ordering heads be sure to specify the shank
diameter and head style (universal or countersunk) of the rivets
to be installed.
H681 Series pulling heads, fit directly on these tools to install
both Bulbed and Standard Cherrylock Rivets.
Other types of pulling heads may be used on these riveters by
using adapters listed.
33