Locked spindle rivets - Peerless Aerospace Fastener Corp

More documents

Recommendations

Info

CHERRYLOCK ® RIVET TOOLING 30 G55 HAND RIVETER DESCRIPTION The Cherry G55 Hand Riveter is a heavy-duty, well balanced tool designed to install large blind rivets where air power is not available. It is operated with both hands and works on a simple, trouble-free ratchet principle. The G55 Riveter is 26¼" long without a pulling head, weighs 5 lbs. and has a 2½" stroke. It will readily install practically all sizes and styles of blind rivets. See Tool Selection Chart on Page 28 for complete capacity information. PULLING HEADS Pulling heads are not furnished with this tool but must be ordered separately. In ordering heads be sure to specify the shank diameter and head style (universal or countersunk) of the rivets to be installed. The following pulling heads will fit directly on the G-55 Riveter: H640B Series .. For 2000 Series Locked Spindle, Flush Fracturing Cherrylock Rivets. In addition, the smaller, screw-on type pulling heads will fit the G55 by using a 226 adapter. Other types of pulling heads may be used on these riveters by using adapters listed.
G700 LIGHTWEIGHT POWER RIVETER U.S. PATENT 3,309,911 DESCRIPTION The Cherry G700 Lightweight Cherrylock Riveter is a compact pneumatic-hydraulic tool designed specifically for fast, efficient installation of Cherrylock Rivets. It weighs only 5¾ lbs. and can be operated in any position with one hand. The G700 is 10 5/8" high, has a 29/32" stroke and develops a minimum of 1220 lbs. pull on 90 to 125 psi of air pressure at the tool. See the Tool Selection Chart on Page 28 for complete tool capacity information. PULLING HEADS Pulling heads are not furnished with this tool but must be ordered separately. In ordering heads be sure to specify the shank diameter and head style (universal or countersunk) of the rivets to be installed. H681 Series pulling heads, fit directly on this tool to install both Bulbed and Standard Cherrylock Rivets. Other types of pulling heads may be used on these riveters by using adapters listed. CHERRYLOCK ® RIVET TOOLING 31
Page 1 and 2: CHERRYLOCK ® LOCKED SPINDLE RIVETS
Page 3 and 4: BULB CHERRYLOCK RIVETS BULBED & WIR
Page 5 and 6: BEFORE PULLING BEGINS Clamp-up comp
Page 7 and 8: To determine the proper grip rivet
Page 9 and 10: HEAD STYLE UNIVERSAL HEAD (MS520470
Page 11 and 12: BULBED CHERRYLOCK ® RIVET NAS 1738
Page 13 and 14: BULBED CHERRYLOCK ® RIVET NAS 1739
Page 15 and 16: BULBED CHERRYLOCK ® RIVET 156° CO
Page 17 and 18: WIREDRAW CHERRYLOCK ® RIVET SELECT
Page 19 and 20: HEAD STYLE UNIVERSAL HEAD COUNTERSU
Page 21 and 22: WIREDRAW CHERRYLOCK ® RIVET NAS 13
Page 23 and 24: WIREDRAW CHERRYLOCK ® NAS 1399 COU
Page 25 and 26: DESIGN NOTE: FOR USE IN LONG GRIP A
Page 27 and 28: CHERRYLOCK ® RIVET INSTALLATION PL
Page 29 and 30: CHERRYLOCK ® RIVET TOOLING LIGHTWE
Page 31: DESCRIPTION G36A HAND RIVETER The C
Page 35 and 36: CHERRYLOCK ® RIVET TOOLING G685B-S
Page 37 and 38: G695B RIGHT ANGLE POWER RIVETER DES
Page 39 and 40: H615B SERIES There is a separate pu
Page 41 and 42: 269C3 GRIP GAGE A simple, self-expl
Page 43 and 44: CHERRYLOCK ® RIVET TOOLING MAINTEN

Locked spindle rivets - Peerless Aerospace Fastener Corp

Create successful ePaper yourself

Delete template?

Save as template?