Locked spindle rivets - Peerless Aerospace Fastener Corp
Locked spindle rivets - Peerless Aerospace Fastener Corp
Locked spindle rivets - Peerless Aerospace Fastener Corp
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CHERRYLOCK ®<br />
RIVET TOOLING<br />
30<br />
G55 HAND RIVETER<br />
DESCRIPTION<br />
The Cherry G55 Hand Riveter is a heavy-duty, well balanced tool<br />
designed to install large blind <strong>rivets</strong> where air power is not available.<br />
It is operated with both hands and works on a simple,<br />
trouble-free ratchet principle.<br />
The G55 Riveter is 26¼" long without a pulling head, weighs 5 lbs.<br />
and has a 2½" stroke. It will readily install practically all sizes<br />
and styles of blind <strong>rivets</strong>. See Tool Selection Chart on Page 28 for<br />
complete capacity information.<br />
PULLING HEADS<br />
Pulling heads are not furnished with this tool but must be<br />
ordered separately. In ordering heads be sure to specify the shank<br />
diameter and head style (universal or countersunk) of the <strong>rivets</strong> to<br />
be installed.<br />
The following pulling heads will fit directly on the G-55 Riveter:<br />
H640B Series .. For 2000 Series <strong>Locked</strong> Spindle, Flush Fracturing<br />
Cherrylock Rivets.<br />
In addition, the smaller, screw-on type pulling heads will fit the<br />
G55 by using a 226 adapter.<br />
Other types of pulling heads may be used on these riveters by<br />
using adapters listed.
Change language