Locked spindle rivets - Peerless Aerospace Fastener Corp
Locked spindle rivets - Peerless Aerospace Fastener Corp
Locked spindle rivets - Peerless Aerospace Fastener Corp
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CHERRYLOCK ®<br />
RIVET INSPECTION<br />
26<br />
COLLAR PROTRUSION LIMITS STEM PROTRUSION LIMITS<br />
WITHIN NAS1400 AND 1740 WITHIN NAS1400 AND 1740<br />
DIAMETER DASH NO.<br />
-3 -4 -5 -6 -8<br />
A-MAX .015 .015 .020 .025 .030<br />
B-MAX .010 .010 .010 .015 .020<br />
INSPECT INSTALLED RIVET FLUSHNESS TO<br />
BREAK-OFF LIMITS OF NAS1400 AND NAS1740<br />
A slight collar “flash” caused by the<br />
pressures necessary to drive the collar<br />
is acceptable within the limit shown.<br />
If the rivet stem and collar are flush within the limits described it can be<br />
safely concluded that a satisfactory blind head and lock has been formed.<br />
CHERRYLOCK RIVETS Have the grip length<br />
marked on the rivet head (except 3/32"<br />
diameter and 1/8" and 5/32" in NAS1097<br />
head style) to provide positive inspection<br />
from the visible side to show that the <strong>rivets</strong><br />
have been installed with the correct grip.<br />
Superficial stretch marks which may<br />
appear in the rivet sleeve are not<br />
detrimental to rivet strength and<br />
are acceptable.<br />
Due to the self-inspecting feature of the Cherrylock,<br />
it is unnecessary to inspect the blind head formation.<br />
BULBED BLIND HEAD