stainless steel handrail & glass systems - Steel & Tube
stainless steel handrail & glass systems - Steel & Tube
stainless steel handrail & glass systems - Steel & Tube
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>stainless</strong> <strong>steel</strong> <strong>handrail</strong> & <strong>glass</strong> <strong>systems</strong>
Product index<br />
Stainless <strong>steel</strong> <strong>handrail</strong> tubes 05<br />
Flush joiners 07<br />
End caps & <strong>handrail</strong> ends 09<br />
Base/cover plates, flanges & joiners 10<br />
Perpendicular joiners 12<br />
Adjustable rail supports 13<br />
Post reducers 14<br />
Handrail supports 15<br />
Square range 16<br />
Glass clamps 18<br />
Glass clamp installation 21<br />
Kleanflow stanchions 22<br />
Branch details 23<br />
Although every endeavour has been made to have all detail contained in the catalogue correct at the time of<br />
printing, we suggest product specification be confirmed with your <strong>Steel</strong> & <strong>Tube</strong> Stainless representative when<br />
placing orders. Items identified in this catalogue as ‘stocked items’ are defined as goods normally held in stock,<br />
and are subject to prior sales.<br />
<strong>Steel</strong> & <strong>Tube</strong> Stainless terms of trade are supplied at the time of opening a trading account and are available<br />
upon request. A copy of this appears on the reverse of all invoices issued. A minimum order charge may apply.<br />
All weights and dimensions provided in this catalogue are theoretical. Mill tolerances will affect actual weights<br />
(+/-). All weights in this catalogue are based on a density of <strong>stainless</strong> <strong>steel</strong> being 8000kgs/m3 .
Stainless <strong>steel</strong> <strong>handrail</strong>s & fittings<br />
This catalogue has been created to aid in product selection, provide detailed product<br />
specifications, and assist with your ordering process. The information contained herein<br />
is subject to change without prior notice, and should not be used as an infallible guide<br />
to specifications. For take off measurements, please check and measure products<br />
before commencing with the job. All fittings are mirror polished unless otherwise stated.<br />
Corrosion resistance<br />
Stainless <strong>steel</strong> is a name given to a group of <strong>steel</strong> alloys<br />
that contain more than 10.5% chromium. Chromium has<br />
a high affinity for oxygen and forms a stable oxide film on<br />
the surface of <strong>stainless</strong> <strong>steel</strong>.<br />
The film is called the ‘passive oxide layer’ and forms<br />
instantaneously in the ordinary atmosphere. The film is<br />
self healing and rebuilds when it has been removed. It is<br />
this film that gives <strong>stainless</strong> <strong>steel</strong> its corrosion resistance.<br />
Austenitic grades<br />
When nickel (Ni) is added to <strong>stainless</strong> <strong>steel</strong> in sufficient<br />
quantities the crystal structure is changed from ferrite<br />
to austenite, hence the term austenitic <strong>stainless</strong> <strong>steel</strong>.<br />
The basic composition of austenitic <strong>stainless</strong> <strong>steel</strong> is<br />
18% chromium (Cr) and 8% nickel (Ni). This is called 304<br />
grade, sometimes referred to as 18/8 or 18/10. If additional<br />
corrosion resistance is required, 2% molybdenum (Mo) is<br />
added to form grade 316.<br />
Stainless <strong>steel</strong> finishes<br />
The finish on the surface of the <strong>steel</strong> will be to an industry<br />
standard that can be described in various ways.<br />
Satin A brushed finish that can be described as<br />
180-320 grit (the effect of rubbing with 180 grit sandpaper)<br />
or No.4 finish.<br />
Super Bright A near mirror finish, also called BA<br />
(Bright Annealed) (600 grit polish).<br />
Mirror Finish Also known as Ultra Bright or No.8 finish<br />
(800 grit polish).<br />
AISI 304 Grade<br />
The most widely used <strong>stainless</strong> <strong>steel</strong> with the best all round<br />
performance. Its carbon content is lower and its corrosion<br />
resistance after welding is higher than some other grades.<br />
It is less susceptible to intergranular corrosion after welding.<br />
It is non magnetic, but becomes slightly magnetic when<br />
cold worked.<br />
AISI 316 Grade<br />
Widely used in the marine industry, T316 has 2-3%<br />
molybdenum which improves corrosion resistance.<br />
T316 has superior corrosion resistance to other austenitic<br />
<strong>steel</strong>s when exposed to many types of chemicals as well<br />
as marine environments.<br />
T316 also has applications in the chemical, textile and<br />
paper industries. It has better strength and creep resistance<br />
at high temperatures than T304 and greater work hardening<br />
properties. It is non magnetic, but becomes slightly<br />
magnetic when cold worked.<br />
Stainless <strong>steel</strong> pricing<br />
Stainless <strong>steel</strong> contains appreciable levels of metals such<br />
as chromium, nickel and even copper. These metals<br />
(nickel especially) experience volatile price fluctuations on<br />
the international metals market.<br />
Other factors affecting prices include: NZD exchange rates,<br />
worldwide scrap supply and general worldwide supply and<br />
demand for <strong>stainless</strong> <strong>steel</strong>.
4<br />
Staining and corrosion of <strong>stainless</strong> fittings –<br />
prevention is better than cure<br />
Stainless <strong>steel</strong> is an incredibly resistant building product<br />
but it is not impervious to mild staining or even corrosion<br />
in some instances. There are several factors and agents<br />
that cause both unsightly staining and more serious metal<br />
corrosion. These include exposure to marine salt or other<br />
corrosive environments, poor design or installation, surface<br />
finish and the grade of <strong>stainless</strong> <strong>steel</strong>.<br />
Coastal conditions can be experienced as much as 20km<br />
inland from the sea, with airborne salt finding its way onto<br />
the surface and into welds and joints of <strong>stainless</strong> fittings.<br />
This salt, as well as dirt, can cause tea staining.<br />
Tea staining is a brown discolouration of the surface.<br />
It does not structurally affect the metal but is unsightly.<br />
Washing on a regular basis with detergent or soap reduces<br />
the chances of staining occurring. Care should be taken<br />
with all chemical cleaners and those containing chloride,<br />
such as bleach, can potentially cause surface marking on<br />
the metal. Avoid <strong>steel</strong> wool or any carbon <strong>steel</strong> cleaning<br />
tools (such as scrapers) as these may actually cause more<br />
corrosion through reaction with the <strong>stainless</strong> <strong>steel</strong>.<br />
The design and position of the <strong>stainless</strong> <strong>steel</strong> can also<br />
impact on its appearance. If water can pool on the surface,<br />
or dirt and dampness exists in corners and hollows the<br />
<strong>stainless</strong> <strong>steel</strong> is more likely to stain. Well ventilated, free<br />
draining installations are best.<br />
316 Grade <strong>stainless</strong> is recommended for marine or<br />
corrosive areas as it has a small percentage of<br />
molybdenum added, improving resistance to tea<br />
staining and corrosion. 304 Grade is slightly less corrosion<br />
resistant and is used extensively away from the coast.<br />
Using a higher polish/grit number can reduce the deposits<br />
or contaminants in most instances.<br />
All <strong>handrail</strong>s and fittings in this publication are 316 or<br />
304 grade unless otherwise indicated.<br />
The recommendations given here for the maintenance of <strong>stainless</strong> fittings are<br />
general guidelines only. It is better to over-care for your <strong>stainless</strong> than to follow<br />
minimum guidelines. These suggestions are based on recommendations from<br />
the Australian Stainless <strong>Steel</strong> Development Association (ASSDA).<br />
Stainless, not stain-free<br />
Pollen and other airborne matter, as well as salt can<br />
create corrosion on <strong>stainless</strong> <strong>steel</strong>. Rain washing the<br />
<strong>stainless</strong> <strong>steel</strong> surface can help reduce tea staining,<br />
and should therefore be an important project design<br />
consideration. Best results are achieved by washing<br />
with soap or mild detergent and warm water followed<br />
by rinsing with clean cold water.<br />
The frequency of cleaning required will vary depending<br />
on the environment and distance from the sea, but should<br />
be at least every three months, and more frequently<br />
as required.<br />
If staining has occurred, consider the following<br />
cleaning options:<br />
Fingerprints Wash with alcohol, trichloroethylene or<br />
acetone. Rinse with water and wipe dry.<br />
Oil and grease Wash with alcohol, trichloroethylene<br />
or acetone, followed by a detergent or soap wash,<br />
rinse with water and wipe dry.<br />
Stains and discolouration Wash with mild abrasive<br />
detergent or soap, rub in the same direction as the visible<br />
structure or surface pattern. Rinse with water and wipe<br />
dry, or wash with weak phosphoric acid solution, rinse<br />
with ammonia solution followed by water and wipe dry.<br />
If necessary, use a plastic abrasive pad such as<br />
Scotchbrite with soapy water for a more vigorous<br />
clean (follow the visible structure or surface pattern).<br />
Rust stains Coat the affected area with oxalic acid<br />
solution for 15-20 minutes, water rinse and wipe dry.<br />
Use abrasives (as above) if necessary.<br />
Paint Coat the paint with a proprietary paint solvent<br />
using a soft nylon brush, water rinse and wipe dry.<br />
Note: Do not use <strong>steel</strong> brushes or <strong>steel</strong> wool, and don’t<br />
use hydrochloric acid on <strong>stainless</strong> <strong>steel</strong>.<br />
Always use protective equipment (rubber or latex gloves,<br />
protective eyewear etc.) and work in a well ventilated area<br />
when using chemicals.<br />
Alternate products may be available.
Round Slotted StainleSS <strong>Steel</strong> handRail tube ASTM A554 AISI 316<br />
Code Slot O.D. Wall Length Finish<br />
atC605015m C tube 50.8mm 1.5mm 6.0m super Bright<br />
atC605015s C tube 50.8mm 1.5mm 6.0m satin<br />
ath605015m h tube 50.8mm 1.5mm 6.0m super Bright<br />
ath605015s h tube 50.8mm 1.5mm 6.0m satin<br />
90° Slotted StainleSS <strong>Steel</strong> coRneR PoSt ASTM AISI 316<br />
Code Slot O.D. Wall Length Finish<br />
ath6090degm 90° 50.8mm 1.5mm 1.1m super Bright<br />
ath6090degs 90° 50.8mm 1.5mm 1.1m satin<br />
blanking StRiP ASTM A554 316<br />
Code Height Width Wall Length Finish<br />
aFrsst-striP 15.7mm 18.8mm 1.5mm 3.0m super Bright<br />
elliPtical StainleSS <strong>Steel</strong> handRail tube ASTM A554 AISI 316<br />
Code O.D. Wall Length Finish<br />
te2338m 23.0 x 38.0mm 1.5mm 6.0m super Bright<br />
te2846m 28.0 x 46.0mm 1.5mm 6.0m super Bright<br />
te3862m 38.0 x 62.0mm 1.5mm 6.0m super Bright<br />
te4275m 42.0 x 75.0mm 1.5mm 6.0m super Bright<br />
RigidiSed StainleSS <strong>Steel</strong> handRail tube ASTM AISI 304<br />
Code O.D. Wall Length Finish<br />
thrt32Ba 31.8mm 1.2mm 6.0m Ba<br />
For more information call 0508 782 465 or visit www.st<strong>stainless</strong>.co.nz<br />
O.D.<br />
W<br />
W<br />
H<br />
H<br />
O.D.<br />
O.D.<br />
W<br />
O.D.<br />
W<br />
H<br />
H<br />
SquaRe/RectangulaR StainleSS <strong>Steel</strong> handRail tube ASTM A554 AISI 304<br />
∙ larger wall thicknesses are available on selected sizes.<br />
Code Dimension<br />
Wall<br />
1.2mm 1.5mm 2.0mm 3.0mm<br />
Length Finish<br />
tr4i025025**BP 25.4 x 25.4mm ^ ^ ^ 6.0m 180 grit<br />
tr4i032032**BP 31.8 x 31.8mm ^ ^ 6.0m 180 grit<br />
tr4i038038**BP 38.1 x 38.1mm ^ ^ ^ 6.0m 180 grit<br />
tr4i051025**BP 50.8 x 25.4mm ^ ^ ^ 6.0m 180 grit<br />
tr4i051051**BP 50.8 x 50.8mm ^ ^ ^ 6.0m 180 grit<br />
tr4i076076**BP 76.1 x 76.1mm ^ ^ 6.0m 180 grit<br />
tr4m02502530hl 25.0 x 25.0mm ^ 6.0m 180 grit<br />
tr4m03003015hl 30.0 x 30.0mm ^ 6.0m 180 grit<br />
tr4m03503515hl 35.0 x 35.0mm ^ 6.0m 180 grit<br />
tr4m03803830hl 38.0 x 38.0mm ^ 6.0m 180 grit<br />
tr4m04004020hl 40.0 x 40.0mm ^ 6.0m 180 grit<br />
tr4m050050**hl 50.0 x 50.0mm ^ ^ 6.0m 180 grit<br />
tr4m060060**hl 60.0 x 60.0mm ^ ^ 6.0m 180 grit<br />
tr4m075075**hl 75.0 x 75.0mm ^ ^ 6.0m 180 grit<br />
tr4m080080**hl 80.0 x 80.0mm ^ ^ 6.0m 180 grit<br />
PRo image StainleSS <strong>Steel</strong> handRail tube ASTM A554 AISI 316<br />
Code Dimension Wall Length Finish<br />
thr60401015m 10.0 x 40.0mm 1.5mm 6.0m super Bright<br />
thr60501015m 10.0 x 50.0mm 1.5mm 6.0m super Bright<br />
thr60751015m 10.0 x 75.0mm 1.5mm 6.0m super Bright<br />
thr60401015s 10.0 x 40.0mm 1.5mm 6.0m satin<br />
thr60501015s 10.0 x 50.0mm 1.5mm 6.0m satin<br />
O.D.<br />
O.D.<br />
stAinless <strong>steel</strong> hAndrAil tubes 5
stAinless <strong>steel</strong> hAndrAil tubes<br />
6<br />
O.D. O.D.<br />
Round Satin StainleSS <strong>Steel</strong> handRail tube ASTM A554 AISI 304<br />
Code O.D. Wall Length Finish<br />
th401212s 12.7mm 1.2mm 6.0m satin<br />
th401615s 15.9mm 1.5mm 6.0m satin<br />
th401912s 19.0mm 1.2mm 6.0m satin<br />
th401915s 19.0mm 1.5mm 6.0m satin<br />
th402212s 22.2mm 1.2mm 6.0m satin<br />
th402215s 22.2mm 1.5mm 6.0m satin<br />
th402512s 25.4mm 1.2mm 6.0m satin<br />
th402515s 25.4mm 1.5mm 6.0m satin<br />
th403215s 31.8mm 1.5mm 6.0m satin<br />
th403815s 38.1mm 1.5mm 6.0m satin<br />
th404515s 44.5mm 1.5mm 6.0m satin<br />
th405115s 50.8mm 1.5mm 6.0m satin<br />
th406315s 63.5mm 1.5mm 6.0m satin<br />
th407615s 76.1mm 1.5mm 6.0m satin<br />
th410115s 101.6mm 1.5mm 6.0m satin<br />
Round Satin StainleSS <strong>Steel</strong> handRail tube ASTM A554 AISI 316<br />
Code O.D. Wall Length Finish<br />
th601915s 19.0mm 1.5mm 6.0m satin<br />
th602515s 25.4mm 1.5mm 6.0m satin<br />
th603215s 31.8mm 1.5mm 6.0m satin<br />
th603815s 38.1mm 1.5mm 6.0m satin<br />
th604515s 44.5mm 1.5mm 6.0m satin<br />
th605115s 50.8mm 1.5mm 6.0m satin<br />
th606315s 63.5mm 1.5mm 6.0m satin<br />
th607615s 76.2mm 1.5mm 6.0m satin<br />
th610115s 101.6mm 1.5mm 6.0m satin<br />
Round SuPeR bRight StainleSS <strong>Steel</strong> handRail tube ASTM A554 AISI 304<br />
Code O.D. Wall Length Finish<br />
th401612m 15.9mm 1.2mm 6.0m super Bright<br />
th401912m 19.0mm 1.2mm 6.0m super Bright<br />
th401915m 19.0mm 1.5mm 6.0m super Bright<br />
th402215m 22.2mm 1.5mm 6.0m super Bright<br />
th402515m 25.4mm 1.5mm 6.0m super Bright<br />
th403215m 31.8mm 1.5mm 6.0m super Bright<br />
th403812m 38.1mm 1.2mm 6.0m super Bright<br />
th403815m 38.1mm 1.5mm 6.0m super Bright<br />
th404515m 44.5mm 1.5mm 6.0m super Bright<br />
th405115m 50.8mm 1.5mm 6.0m super Bright<br />
th407615m 76.2mm 1.5mm 6.0m super Bright<br />
Round SuPeR bRight StainleSS <strong>Steel</strong> handRail tube ASTM A554 AISI 316<br />
Code O.D. Wall Length Finish<br />
th601915m 19.0mm 1.5mm 6.0m super Bright<br />
th602215m 22.2mm 1.5mm 6.0m super Bright<br />
th602515m 25.4mm 1.5mm 6.0m super Bright<br />
th603215m 31.8mm 1.5mm 6.0m super Bright<br />
th603815m 38.1mm 1.5mm 6.0m super Bright<br />
th604515m 44.5mm 1.5mm 6.0m super Bright<br />
th605115m 50.8mm 1.5mm 6.0m super Bright<br />
th607615m 76.2mm 1.5mm 6.0m super Bright<br />
Alternate products may be available.
90° RadiuSed fluSh joineR AISI 316<br />
Code <strong>Tube</strong> Ø Wall A B Weight<br />
1501e 1.5in 1.5mm 66.0mm 38.1mm 271g<br />
2001e 2.0in 1.5mm 66.0mm 50.8mm 385g<br />
90° fluSh joineR AISI 316<br />
Code <strong>Tube</strong> Ø Wall A B Weight<br />
1002e 1.0in 1.5mm 38.0mm 25.4mm 102g<br />
1502e 1.5in 1.5mm 51.0mm 38.1mm 230g<br />
2002e 2.0in 1.5mm 57.0mm 50.8mm 340g<br />
adjuStable fluSh joineR AISI 316<br />
∙ a flexible joiner used for stairway <strong>handrail</strong>s or angled <strong>handrail</strong>s.<br />
∙ adjusts from 90° to 180°.<br />
Code <strong>Tube</strong> Ø Wall A B C Weight<br />
349e-1.5 1.5in 1.5mm 41.0mm 38.1mm 29.0mm 225g<br />
349e-2.0 2.0in 1.5mm 57.0mm 50.8mm 38.0mm 485g<br />
For more information call 0508 782 465 or visit www.st<strong>stainless</strong>.co.nz<br />
A<br />
A<br />
C<br />
A<br />
B<br />
B<br />
B<br />
B<br />
B<br />
B<br />
3-way adjuStable fluSh joineR AISI 316<br />
∙ a flexible joiner used for stairway <strong>handrail</strong>s or angled <strong>handrail</strong>s.<br />
∙ adjusts from 120° to 180°.<br />
Code <strong>Tube</strong> Ø Wall A B Weight<br />
334e 2.0in 1.5mm 73.0mm 50.8mm 650g<br />
135° fluSh joineR AISI 316<br />
Code <strong>Tube</strong> Ø Wall A B Weight<br />
1003e 1.0in 1.5mm 22.0mm 25.4mm 92g<br />
1503e 1.5in 1.5mm 41.0mm 38.1mm 200g<br />
2003e 2.0in 1.5mm 45.0mm 50.8mm 285g<br />
in-line fluSh joineR AISI 316<br />
Code <strong>Tube</strong> Ø Wall A B C Weight<br />
1004e 1.0in 1.5mm 38.0mm 25.4mm 3.0mm 30g<br />
1504e 1.5in 1.5mm 51.0mm 38.1mm 3.0mm 48g<br />
2004e 2.0in 1.5mm 54.0mm 50.8mm 3.0mm 120g<br />
B<br />
A<br />
A<br />
B<br />
A<br />
B<br />
C<br />
B<br />
135°<br />
B<br />
B<br />
A<br />
Flush joiners 7
Flush joiners<br />
8<br />
tee fluSh joineR AISI 316<br />
Code <strong>Tube</strong> Ø Wall A B C Weight<br />
1005e 1.0in 1.5mm 36.0mm 25.4mm 45.0mm 140g<br />
1505e 1.5in 1.5mm 51.0mm 38.1mm 60.0mm 290g<br />
2005e 2.0in 1.5mm 57.0mm 50.8mm 67.0mm 450g<br />
90° tee fluSh joineR AISI 316<br />
Code <strong>Tube</strong> Ø Wall A B Weight<br />
1006e 1.0in 1.5mm 38.0mm 25.4mm 140g<br />
1506e 1.5in 1.5mm 51.0mm 38.1mm 275g<br />
2006e 2.0in 1.5mm 57.0mm 50.8mm 435g<br />
135° tee fluSh joineR AISI 316<br />
Code <strong>Tube</strong> Ø Wall A B Weight<br />
1507e 1.5in 1.5mm 41.0mm 38.1mm 340g<br />
2007e 2.0in 1.5mm 45.0mm 50.8mm 500g<br />
A<br />
A<br />
A<br />
A<br />
C<br />
B<br />
B<br />
B<br />
B<br />
B<br />
B<br />
135°<br />
B<br />
B<br />
4-way tee fluSh joineR AISI 316<br />
Code <strong>Tube</strong> Ø Wall A B C Weight<br />
1508e 1.5in 1.5mm 51.0mm 38.1mm 60.0mm 300g<br />
2008e 2.0in 1.5mm 57.0mm 50.8mm 67.0mm 560g<br />
135° StaR fluSh joineR AISI 316<br />
Code <strong>Tube</strong> Ø Wall A B C Weight<br />
1509e 1.5in 1.5mm 51.0mm 38.1mm 60.0mm 350g<br />
2009e 2.0in 1.5mm 57.0mm 50.8mm 67.0mm 500g<br />
4-way StaR fluSh joineR AISI 316<br />
Code <strong>Tube</strong> Ø Wall A B Weight<br />
1510e 1.5in 1.5mm 60.0mm 38.1mm 390g<br />
2010e 2.0in 1.5mm 67.0mm 50.8mm 460g<br />
A<br />
A<br />
A<br />
Alternate products may be available.<br />
C<br />
B<br />
B<br />
C<br />
B<br />
B<br />
B<br />
135°<br />
B<br />
B<br />
B
Self gRiP end caP AISI 316<br />
∙ a popular cast intermediate dome end cap, with a knurled grip to fit into the tube.<br />
Code <strong>Tube</strong> Ø Wall B H Weight<br />
1517a 1.5in 1.5mm 38.1mm 2.5mm 65g<br />
2017a 2.0in 1.5mm 50.8mm 2.5mm 125g<br />
dome end caP AISI 316<br />
∙ a popular cast dome end cap, used for <strong>handrail</strong> ends or freestanding post tops.<br />
Code <strong>Tube</strong> Ø Wall B H Weight<br />
1018a 1.0in 1.5mm 25.4mm 13.0mm 30g<br />
1518a 1.5in 1.5mm 38.1mm 19.0mm 65g<br />
2018a 2.0in 1.5mm 50.8mm 25.0mm 150g<br />
flat end caP AISI 316<br />
∙ a popular cast true flat end cap, used for <strong>handrail</strong> ends or freestanding post tops.<br />
Code <strong>Tube</strong> Ø Wall B H Weight<br />
1019a 1.0in 1.5mm 25.4mm 1.8mm 20g<br />
1519a 1.5in 1.5mm 38.1mm 3.5mm 50g<br />
2019a 2.0in 1.5mm 50.8mm 4.0mm 85g<br />
For more information call 0508 782 465 or visit www.st<strong>stainless</strong>.co.nz<br />
B<br />
B<br />
B<br />
H<br />
H<br />
H<br />
light knock-in end caP AISI 316<br />
∙ an attractive self holding, slightly domed end cap, suitable for <strong>handrail</strong> ends or freestanding<br />
post tops.<br />
∙ use a soft faced hammer to tap these into place.<br />
Code <strong>Tube</strong> Ø Wall B H Weight<br />
1030a 1.0in 1.5mm 25.4mm 4.0mm 10g<br />
1530a 1.5in 1.5mm 38.1mm 6.0mm 15g<br />
2030a 2.0in 1.5mm 50.8mm 8.0mm 30g<br />
45° handRail end AISI 316<br />
∙ a 45° cast <strong>handrail</strong> end, mainly used for stairway <strong>handrail</strong> terminations.<br />
Code <strong>Tube</strong> Ø Wall A B C Weight<br />
2025a 2.0in 1.5mm 70.0mm 50.8mm 70.0mm 400g<br />
90° handRail end AISI 316<br />
∙ a 90° cast <strong>handrail</strong> end, mainly used for stairway <strong>handrail</strong> terminations.<br />
Code <strong>Tube</strong> Ø Wall A B C Weight<br />
2026a 2.0in 1.5mm 89.0mm 50.8mm 89.0mm 420g<br />
A<br />
A<br />
C<br />
B<br />
C<br />
135°<br />
H<br />
B<br />
B<br />
end cAps & hAndrAil ends 9
Ase/cover plAtes, FlAnges & joiners<br />
10<br />
Round coveR Plate only AISI 316<br />
∙ a self holding cover plate, suitable for posts and <strong>handrail</strong>s which are set into a surface or over<br />
a fixed base plate.<br />
Code <strong>Tube</strong> Ø A H Weight<br />
1401BC 1.5in 92.0mm 20.0mm 40g<br />
2001BC 2.0in 110.0mm 20.0mm 55g<br />
Round baSe Plate with coveR (weld)<br />
∙ a sheet material round base plate with a self holding cover.<br />
∙ Suitable for intermediate <strong>handrail</strong> posts.<br />
Code <strong>Tube</strong> Ø A B H T Grade Weight<br />
1001C 1.0in 72.0mm 2.0mm 20.0mm 10.5mm aisi 304 75g<br />
1401C 1.5in 92.0mm 2.0mm 20.0mm 10.5mm aisi 304 125g<br />
2001B 2.0in 110.0mm 2.0mm 20.0mm 10.5mm aisi 316 177g<br />
2401C 2.5in 120.0mm 2.5mm 25.0mm 10.5mm aisi 304 255g<br />
3001C 3.0in 135.0mm 3.0mm 31.0mm 10.5mm aisi 304 370g<br />
Round heavy duty baSe Plate (weld) AISI 316<br />
∙ a 3-hole base plate with a satin surface finish.<br />
∙ Suitable for commercial and structural applications.<br />
∙ a clip-on cover is also available (2001a-c).<br />
Code <strong>Tube</strong> Ø A B T I Weight<br />
2001d 2.0in 100.0mm 6.0mm 12.5mm 51.0mm 249g<br />
T Ø<br />
B<br />
this item must be welded.<br />
T Ø<br />
B<br />
this item must be welded.<br />
A<br />
A<br />
A<br />
I<br />
H<br />
H<br />
Round baSe Plate only (weld) AISI 316<br />
∙ a 3-hole base plate with a mill surface finish.<br />
Code <strong>Tube</strong> Ø A B I T Weight<br />
0501a-B 0.5in 65.0mm 2.0mm 6.5mm 13.0mm 51g<br />
1001a-B 1.0in 65.0mm 2.0mm 6.5mm 25.5mm 44g<br />
1501a-B 1.5in 80.0mm 2.0mm 6.5mm 38.3mm 59g<br />
2001a-B 2.0in 100.0mm 3.0mm 8.5mm 51.0mm 129g<br />
Round baSe Plate with coveR (weld) AISI 316<br />
∙ a 3-hole base plate with a clip-on cover and a<br />
mirror polished cover plate.<br />
this item must be welded.<br />
this item must be welded.<br />
Code <strong>Tube</strong> Ø A B I T Weight<br />
0501a 0.5in 65.0mm 2.0mm 6.5mm 13.0mm 81g<br />
1001a 1.0in 65.0mm 2.0mm 6.5mm 25.5mm 72g<br />
1501a 1.5in 80.0mm 2.0mm 6.5mm 38.3mm 100g<br />
2001a 2.0in 100.0mm 3.0mm 8.5mm 50.1mm 217g<br />
Round coveR Plate only AISI 316<br />
∙ a domed cover plate, suitable for posts and <strong>handrail</strong>s which are set into a surface or over<br />
a fixed base plate.<br />
Code <strong>Tube</strong> Ø A B H T Finish Weight<br />
0501a-C 0.5in 67.0mm 0.8mm 15.0mm 13.1mm mirror 30g<br />
1001a-C 1.0in 67.0mm 0.8mm 15.0mm 25.8mm mirror 28g<br />
1501a-C 1.5in 82.0mm 0.8mm 17.0mm 38.4mm mirror 41g<br />
2001a-C 2.0in 102.0mm 0.8mm 26.0mm 51.2mm mirror 88g<br />
2001a-C-2 2.0in 102.0mm 0.8mm 26.0mm 51.2mm satin 88g<br />
I Ø<br />
B<br />
I Ø<br />
B<br />
Alternate products may be available.<br />
B<br />
A<br />
T<br />
A<br />
T<br />
A<br />
T<br />
H
Round baSe Plate/flange AISI 316<br />
∙ a popular heavy duty cast 3-hole base plate, suitable for fixing posts to flooring, or <strong>handrail</strong>s<br />
to walls and posts.<br />
Code <strong>Tube</strong> Ø A B H I Weight<br />
1016a 1.0in 70.0mm 25.4mm 25.0mm 6.5mm 115g<br />
1516a 1.5in 76.0mm 38.1mm 25.0mm 5.5mm 170g<br />
2016a 2.0in 102.0mm 50.8mm 31.0mm 9.0mm 315g<br />
Round adjuStable heavy duty baSe Plate AISI 316<br />
∙ a height adjustable concealed heavy duty base plate, with self-holding fins that grip onto the<br />
outside of the tube.<br />
Code <strong>Tube</strong> Ø A B C Weight<br />
1099a 1.0in 35.0mm 25.4mm 67.0mm 170g<br />
1599a 1.5in 45.0mm 38.1mm 83.0mm 360g<br />
2099a 2.0in 48.0mm 50.8mm 101.0mm 495g<br />
SquaRe heavy duty baSe Plate (weld) AISI 304 this item requires welding to the<br />
∙ a square heavy duty 4-hole sheet type material base plate. underneath side of the plate.<br />
∙ Suitable for commercial or domestic use where the need for strength is an issue.<br />
Code <strong>Tube</strong> Ø A B C D I Weight<br />
1402s 1.5in 38.4mm 110.0mm 3.0mm 17.0mm 10.5mm 260g<br />
2002s 2.0in 51.0mm 110.0mm 4.0mm 19.0mm 10.5mm 330g<br />
2402s 2.5in 64.2mm 127.0mm 4.0mm 24.0mm 10.5mm 455g<br />
3002s 3.0in 77.0mm 143.0mm 5.0mm 26.0mm 10.5mm 630g<br />
For more information call 0508 782 465 or visit www.st<strong>stainless</strong>.co.nz<br />
I Ø<br />
D<br />
B<br />
I Ø I Ø<br />
A<br />
B<br />
C<br />
B<br />
A<br />
H<br />
A<br />
B<br />
C<br />
oblong baSe Plate/flange AISI 316<br />
∙ a heavy duty cast 2-hole slab base, suitable for fixing <strong>handrail</strong>s in-between timber,<br />
masonry or <strong>steel</strong> posts.<br />
∙ this can also be used for floor mounting where space is limited.<br />
Code <strong>Tube</strong> Ø A B C I Weight<br />
1014a 1.0in 70.0mm 25.4mm 40.0mm 7.0mm 85g<br />
1514a 1.5in 75.0mm 38.1mm 56.0mm 7.0mm 140g<br />
2014a 2.0in 100.0mm 50.8mm 69.0mm 9.0mm 255g<br />
wall StoP flange AISI 316<br />
∙ a 3-hole cast angled flange (please specify stairway angle when ordering), which can be turned<br />
180° to complete the stairway <strong>handrail</strong>.<br />
∙ Suitable for fixing <strong>handrail</strong>s down stairways between timber, masonry or <strong>steel</strong> posts.<br />
Code <strong>Tube</strong> Ø D A B W I Weight<br />
1515a 1.5in 35° 88.0mm 38.1mm 57.0mm 5.5mm 205g<br />
2015a 2.0in 45° 130.0mm 50.8mm 70.0mm 7.0mm 260g<br />
2015C 2.0in 37° 110.0mm 50.8mm 70.0mm 6.0mm 260g<br />
PeRPendiculaR joineR thRough Ring AISI 316<br />
Code <strong>Tube</strong> Ø B C H Weight<br />
2013a 2.0in 50.8mm 50.8mm 89.0mm 230g<br />
I Ø<br />
D°<br />
C<br />
A<br />
B<br />
A<br />
B<br />
B<br />
I Ø<br />
H<br />
W<br />
C<br />
bAse/cover plAtes, FlAnges & joiners 11
perpendiculAr joiners<br />
12<br />
exteRnal caP PeRPendiculaR joineR AISI 316<br />
∙ Suitable for joining vertical posts to horizontal <strong>handrail</strong>s.<br />
∙ the external fit negates the need for a true flat tube cut.<br />
Code <strong>Tube</strong> Ø A B H C Weight<br />
313a-.5 0.5in 15.8mm 13.1mm 9.3mm 2.0in 6g<br />
313a-1 1.0in 28.5mm 25.8mm 17.0mm 2.0in 23g<br />
313a-1.5-1.5 1.5in 43.0mm 39.0mm 25.0mm 1.5in 46g<br />
313a-1.5 1.5in 43.0mm 39.0mm 25.0mm 2.0in 46g<br />
313a-2 2.0in 55.0mm 51.5mm 39.0mm 2.0in 101g<br />
exPanding cage exteRnal fit PeRPendiculaR joineR AISI 316<br />
∙ an external fit joiner cap and expanding internal cage, suitable for joining posts to <strong>handrail</strong>s,<br />
or mid rails to posts.<br />
∙ insert the cage into the tube, hold the cap and turn the post until the cap is tight.<br />
∙ the external fit negates the need for a true flat tube cut.<br />
Code <strong>Tube</strong> Ø A B H C Weight<br />
313al-1 1.0in 28.5mm 25.8mm 17.0mm 2.0in 41g<br />
313al-1.5-1.5 1.5in 43.0mm 39.0mm 25.0mm 1.5in 98g<br />
313al-1.5 1.5in 43.0mm 39.0mm 25.0mm 2.0in 98g<br />
313al-2 2.0in 55.0mm 51.5mm 39.0mm 2.0in 188g<br />
37° exteRnal caP PeRPendiculaR joineR AISI 316<br />
∙ Suitable for joining vertical posts to angled stairway <strong>handrail</strong>s.<br />
∙ the external fit negates the need for a true flat tube cut.<br />
Code <strong>Tube</strong> Ø A B H C Weight<br />
314a-1 1.0in 28.5mm 25.8mm 32.0mm 2.0in 34g<br />
314a-1.5-1.5 1.5in 42.0mm 38.8mm 44.0mm 1.5in 91g<br />
314a-1.5 1.5in 42.0mm 38.8mm 44.0mm 2.0in 91g<br />
314a-2 2.0in 56.0mm 51.4mm 56.0mm 2.0in 188g<br />
H<br />
A<br />
B<br />
C<br />
A<br />
B<br />
C<br />
A<br />
B<br />
C<br />
H<br />
H<br />
exPanding 37° exteRnal caP PeRPendiculaR joineR AISI 316<br />
∙ Suitable for joining vertical posts to angled stairway <strong>handrail</strong>s.<br />
∙ the external fit negates the need for a true flat tube cut.<br />
Code <strong>Tube</strong> Ø A B H C Weight<br />
314al-1 1.0in 28.5mm 25.8mm 32.0mm 2.0in 120g<br />
314al-1.5-1.5 1.5in 42.0mm 38.8mm 44.0mm 1.5in 180g<br />
314al-1.5 1.5in 42.0mm 38.8mm 44.0mm 2.0in 180g<br />
314al-2 2.0in 56.0mm 51.4mm 56.0mm 2.0in 200g<br />
fluSh fitting PeRPendiculaR joineR AISI 316<br />
∙ Suitable for joining posts to a horizontal <strong>handrail</strong> or joining horizontal <strong>handrail</strong>s to vertical posts.<br />
∙ fix the joiners to the top <strong>handrail</strong> with screws or rivets through the underneath internal.<br />
∙ all joiners are radiused to suit the top <strong>handrail</strong>, as per the specifications below.<br />
Code <strong>Tube</strong> Ø Wall B D H C Weight<br />
1027a 1.0in 1.5mm 25.4mm 7.0mm 30.0mm 1.0in 40g<br />
1027a-1.5 1.0in 1.5mm 25.4mm 7.0mm 30.0mm 1.5in 40g<br />
1027a-2 1.0in 1.5mm 25.4mm 7.0mm 30.0mm 2.0in 40g<br />
1527a 1.5in 1.5mm 38.1mm 15.0mm 41.0mm 1.5in 89g<br />
1527a-2 1.5in 1.5mm 38.1mm 15.0mm 41.0mm 2.0in 89g<br />
2027a 2.0in 1.5mm 50.8mm 32.0mm 57.0mm 2.0in 156g<br />
D<br />
Alternate products may be available.<br />
C<br />
A<br />
B<br />
C<br />
B<br />
H<br />
H
RadiuSed inteRnal fit adjuStable Rail SuPPoRt AISI 316<br />
∙ a fully adjustable <strong>handrail</strong> support for fixing stairway posts to angled round <strong>handrail</strong>s.<br />
∙ the external leaf-springs grip the interior of the tube for extreme hold and easy installation.<br />
Code <strong>Tube</strong> Ø Wall A B C R Weight<br />
315a-1 1.0in 1.5mm 32.0mm 25.4mm 19.0mm 1.0in 66g<br />
315a-1-1.5 1.0in 1.5mm 32.0mm 25.4mm 19.0mm 1.5in 66g<br />
315a-1-2 1.0in 1.5mm 32.0mm 25.4mm 19.0mm 2.0in 66g<br />
315a-1.5 1.5in 1.5mm 45.0mm 38.1mm 29.0mm 1.5in 161g<br />
315a-1.5-2 1.5in 1.5mm 45.0mm 38.1mm 29.0mm 2.0in 161g<br />
315a-2 2.0in 1.5mm 51.0mm 50.8mm 32.0mm 2.0in 320g<br />
RadiuSed exteRnal fit adjuStable Rail SuPPoRt AISI 316<br />
∙ a fully adjustable <strong>handrail</strong> support for fixing stairway posts to angled round <strong>handrail</strong>s.<br />
∙ the internal ribs negate the need for welding or a true end tube cut.<br />
Code <strong>Tube</strong> Ø Wall A B C R Weight<br />
316a-1 1.0in 1.5mm 32.0mm 25.4mm 19.0mm 1.0in 80g<br />
316a-1-2 1.0in 1.5mm 32.0mm 25.4mm 19.0mm 2.0in 80g<br />
316a-2 2.0in 1.5mm 51.0mm 50.8mm 32.0mm 2.0in 302g<br />
flat baSe inteRnal fit adjuStable Rail SuPPoRt AISI 316<br />
∙ a fully adjustable <strong>handrail</strong> support for fixing stairway posts to angled flat <strong>handrail</strong>s.<br />
∙ the external leaf-springs grip the interior of the tube for extreme hold and easy installation.<br />
Code <strong>Tube</strong> Ø Wall A B C Weight<br />
315aP-1 1.0in 1.5mm 32.0mm 25.4mm 19.0mm 75g<br />
315aP-1.5 1.5in 1.5mm 45.0mm 38.1mm 29.0mm 157g<br />
315aP-2 2.0in 1.5mm 51.0mm 50.8mm 32.0mm 299g<br />
For more information call 0508 782 465 or visit www.st<strong>stainless</strong>.co.nz<br />
R<br />
R<br />
B<br />
B<br />
B<br />
A<br />
C<br />
A<br />
C<br />
A<br />
C<br />
flat baSe exteRnal fit adjuStable Rail SuPPoRt AISI 316<br />
∙ a fully adjustable <strong>handrail</strong> support for fixing stairway posts to angled flat <strong>handrail</strong>s.<br />
∙ the internal ribs negate the need for welding or a true end tube cut.<br />
Code <strong>Tube</strong> Ø Wall A B C Weight<br />
316aP-2 2.0in 1.5mm 51.0mm 50.8mm 32.0mm 288g<br />
Round baSe inteRnal fit adjuStable Rail SuPPoRt AISI 316<br />
∙ the external leaf-springs grip the interior of the tube for extreme hold and easy installation.<br />
Code <strong>Tube</strong> Ø Wall A B C D Weight<br />
315aC-1 1.0in 1.5mm 32.0mm 25.4mm 19.0mm 60.0mm 140g<br />
315aC-1.5 1.5in 1.5mm 38.0mm 38.1mm 22.0mm 76.0mm 370g<br />
315aC-2 2.0in 1.5mm 51.0mm 50.8mm 26.0mm 101.0mm 600g<br />
Round baSe exteRnal fit adjuStable Rail SuPPoRt AISI 316<br />
Code <strong>Tube</strong> Ø Wall A B C D Weight<br />
316aC-1 1.0in 1.5mm 32.0mm 25.4mm 19.0mm 60.0mm 140g<br />
316aC-2 2.0in 1.5mm 51.0mm 50.8mm 26.0mm 101.0mm 600g<br />
B<br />
B<br />
D<br />
B<br />
D<br />
A<br />
C<br />
C<br />
A<br />
C<br />
A<br />
AdjustAble rAil supports 13
post reducers<br />
14<br />
taPeRed PoSt ReduceR AISI 316<br />
∙ a flush fitting slimline post top reducer for a decorative look.<br />
∙ use with a 313al-1 or 1027a to join to a horizontal <strong>handrail</strong>, or a 314al-1<br />
to join to a stairway <strong>handrail</strong>. use with a 1014a to join to a timber top rail.<br />
Code <strong>Tube</strong> Ø Wall A B H Weight<br />
1520a 1.5in 1.5mm 0.75in 38.1mm 81.0mm 118g<br />
2020a 2.0in 1.5mm 1.0in 50.8mm 81.0mm 194g<br />
flat PoSt ReduceR AISI 316<br />
∙ a flush fitting slimline post top reducer for a decorative look.<br />
∙ use with a 313al-1 or 1027a to join to a horizontal <strong>handrail</strong>, or a 314al-1<br />
to join to a stairway <strong>handrail</strong>. use with a 1014a to join to a timber top rail.<br />
Code <strong>Tube</strong> Ø Wall A B H Weight<br />
1522a 1.5in 1.5mm 0.75in 38.1mm 87.5mm 84g<br />
2022a 2.0in 1.5mm 1.0in 50.8mm 87.5mm 167g<br />
dome PoSt ReduceR AISI 316<br />
∙ a flush fitting dome post top reducer for a decorative look.<br />
∙ use with a 313al-1 or 1027a to join to a horizontal <strong>handrail</strong>, or a 314al-1<br />
to join to a stairway <strong>handrail</strong>. use with a 1014a to join to a timber top rail.<br />
Code <strong>Tube</strong> Ø Wall A B H Weight<br />
1512a 1.5in 1.5mm 0.75in 38.1mm 87.5mm 112g<br />
2012a 2.0in 1.5mm 1.0in 50.8mm 87.5mm 207g<br />
A<br />
B<br />
A<br />
B<br />
A<br />
B<br />
H<br />
H<br />
H<br />
RadiuSed handRail SuPPoRt AISI 304<br />
∙ a concealed base <strong>handrail</strong> support with a raduised top, designed to be mounted<br />
on top of a nub wall, vertical wall or floor.<br />
Code <strong>Tube</strong> Ø A C R Weight<br />
1540a 1.5in 76.0mm 57.0mm 1.5in 200g<br />
2040a 2.0in 76.0mm 57.0mm 2.0in 252g<br />
centRe SuPPoRt PaRaPet Rail SuPPoRt AISI 304<br />
∙ a concealed base <strong>handrail</strong> centre support, designed to be mounted on top of a nub wall,<br />
vertical wall or floor.<br />
Code <strong>Tube</strong> Ø A B C Weight<br />
1558a 1.5in 100.0mm 38.1mm 78.0mm 265g<br />
2058a 2.0in 100.0mm 50.8mm 78.0mm 296g<br />
end SuPPoRt PaRaPet Rail SuPPoRt AISI 304<br />
∙ a concealed base <strong>handrail</strong> end support, designed to be mounted on top of a nub wall,<br />
vertical wall or floor.<br />
Code <strong>Tube</strong> Ø A B C Weight<br />
1559a 1.5in 100.0mm 38.1mm 78.0mm 278g<br />
2059a 2.0in 100.0mm 50.8mm 78.0mm 309g<br />
coRneR SuPPoRt PaRaPet Rail SuPPoRt AISI 304<br />
∙ a concealed base <strong>handrail</strong> corner support, designed to be mounted on top of a nub wall<br />
or floor to achieve a 90° corner.<br />
Code <strong>Tube</strong> Ø A B C Weight<br />
1560a 1.5in 100.0mm 38.1mm 78.0mm 288g<br />
2060a 2.0in 100.0mm 50.8mm 78.0mm 315g<br />
Alternate products may be available.<br />
R<br />
A<br />
B<br />
C<br />
B<br />
C<br />
B<br />
C<br />
A<br />
A<br />
A<br />
C
RadiuSed handRail SuPPoRt AISI 316<br />
∙ a 3-hole <strong>handrail</strong> support designed for fixing to any type of wall.<br />
∙ the radiused top with countersunk holes allows a <strong>handrail</strong> to be attached<br />
without the need for welding.<br />
Code A B C D I R Weight<br />
1528a 63.0mm 85.0mm 31.0mm 12.0mm 6.0mm 1.5in 247g<br />
2028a 63.0mm 85.0mm 31.0mm 12.0mm 6.0mm 2.0in 247g<br />
flat baSe handRail SuPPoRt AISI 316<br />
∙ a 3-hole <strong>handrail</strong> support designed for fixing to any type of wall.<br />
∙ the flat top with countersunk holes allows a <strong>handrail</strong> to be attached<br />
without the need for welding.<br />
Code A B C D I Weight<br />
2029a 63.0mm 85.0mm 31.0mm 12.0mm 6.0mm 243g<br />
For more information call 0508 782 465 or visit www.st<strong>stainless</strong>.co.nz<br />
D Ø<br />
I Ø I Ø<br />
RadiuSed handRail SuPPoRt without toP AISI 316<br />
∙ a 3-hole <strong>handrail</strong> support designed for fixing to any type of wall.<br />
∙ the unradiused fitting allows any <strong>handrail</strong> to be welded or fastened to the bracket.<br />
Code A B D I Weight<br />
2028a-B 63.0mm 85.0mm 12.0mm 6.0mm 235g<br />
D Ø<br />
I Ø I Ø<br />
A<br />
D Ø<br />
A<br />
I Ø I Ø<br />
A<br />
B<br />
C R<br />
B<br />
B<br />
C<br />
RadiuSed handRail SuPPoRt with coach ScRew AISI 316<br />
∙ a coach screw <strong>handrail</strong> support designed for fixing into a timber stud wall.<br />
∙ the radiused top with countersunk holes allows a <strong>handrail</strong> to be attached<br />
without the need for welding.<br />
Code A B C D L R Weight<br />
1528a-s 63.0mm 85.0mm 31.0mm 12.0mm 60.0mm 1.5in 280g<br />
2028a-s 63.0mm 85.0mm 31.0mm 12.0mm 60.0mm 2.0in 280g<br />
flat baSe handRail SuPPoRt with coach ScRew AISI 316<br />
∙ a coach screw <strong>handrail</strong> support designed for fixing into a timber stud wall.<br />
∙ the flat top with countersunk holes allows a <strong>handrail</strong> to be attached<br />
without the need for welding.<br />
Code A B C D L Weight<br />
2029a-s 63.0mm 85.0mm 31.0mm 12.0mm 60.0mm 280g<br />
RadiuSed handRail SuPPoRt with coach ScRew, without toP AISI 316<br />
∙ a coach screw <strong>handrail</strong> support designed for fixing into a timber stud wall.<br />
∙ the unradiused fitting allows any <strong>handrail</strong> to be welded or fastened to the bracket.<br />
Code A B D L Weight<br />
2028a-s-B 63.0mm 85.0mm 12.0mm 60.0mm 255g<br />
D Ø<br />
D Ø<br />
A<br />
D Ø<br />
D Ø<br />
D Ø<br />
D Ø<br />
A<br />
A<br />
B<br />
L<br />
C<br />
B<br />
L<br />
B<br />
L<br />
C<br />
R<br />
hAndrAil supports 15
squAre rAnge<br />
16<br />
90° fluSh joineR AISI 316<br />
∙ a satin (180g) finished modular <strong>handrail</strong> component.<br />
∙ heavy duty cast components are also suitable for use on commercial sites.<br />
∙ epoxy glue, pop rivet or weld the fittings together.<br />
Code <strong>Tube</strong> Ø Wall A B Weight<br />
st-2002 2.0in 1.5mm 63.0mm 50.8mm 655g<br />
inline fluSh joineR AISI 316<br />
∙ a satin (180g) finished modular <strong>handrail</strong> component.<br />
∙ heavy duty cast components are also suitable for use on commercial sites.<br />
∙ epoxy glue, pop rivet or weld the fittings together.<br />
Code <strong>Tube</strong> Ø Wall A B C Weight<br />
st-2004 2.0in 1.5mm 66.0mm 50.8mm 6.0mm 254g<br />
tee fluSh joineR AISI 316<br />
∙ a satin (180g) finished modular <strong>handrail</strong> component.<br />
∙ heavy duty cast components are also suitable for use on commercial sites.<br />
∙ epoxy glue, pop rivet or weld the fittings together.<br />
Code <strong>Tube</strong> Ø Wall A B C Weight<br />
st-2005 2.0in 1.5mm 63.0mm 50.8mm 75.0mm 785g<br />
A<br />
A<br />
B<br />
A<br />
C<br />
B<br />
C<br />
B<br />
B<br />
B<br />
90° tee fluSh joineR AISI 316<br />
∙ a satin (180g) finished modular <strong>handrail</strong> component.<br />
∙ heavy duty cast components are also suitable for use on commercial sites.<br />
∙ epoxy glue, pop rivet or weld the fittings together.<br />
Code <strong>Tube</strong> Ø Wall A B Weight<br />
st-2006 2.0in 1.5mm 63.0mm 50.8mm 752g<br />
oblong baSe Plate/flange AISI 316<br />
∙ a satin (180g) finished modular <strong>handrail</strong> component.<br />
∙ heavy duty cast components are also suitable for use on commercial sites.<br />
∙ epoxy glue, pop rivet or weld the fittings together.<br />
Code A B C H I Weight<br />
st-2014 116.0mm 50.8mm 80.0mm 30.0mm 8.0mm 445g<br />
37° wall StoP flange AISI 316<br />
∙ a satin (180g) finished modular <strong>handrail</strong> component.<br />
∙ heavy duty cast components are also suitable for use on commercial sites.<br />
∙ epoxy glue, pop rivet or weld the fittings together.<br />
Code A B C I Weight<br />
st-2015 155.0mm 51.5mm 80.0mm 8.0mm 690g<br />
A<br />
Alternate products may be available.<br />
B<br />
A<br />
I Ø B<br />
A<br />
B<br />
I Ø<br />
C<br />
B<br />
C<br />
H
aSe Plate/flange AISI 316<br />
∙ a satin (180g) finished modular <strong>handrail</strong> component.<br />
∙ heavy duty cast components are also suitable for use on commercial sites.<br />
∙ epoxy glue, pop rivet or weld the fittings together.<br />
Code A B C H I Weight<br />
st-2016 100.0mm 50.8mm 100.0mm 30.0mm 8.0mm 498g<br />
flat end caP AISI 316<br />
∙ a satin (180g) finished modular <strong>handrail</strong> component.<br />
∙ heavy duty cast components are also suitable for use on commercial sites.<br />
∙ epoxy glue, pop rivet or weld the fittings together.<br />
Code <strong>Tube</strong> Ø Wall A H L Weight<br />
st-2019 2.0in 1.5mm 50.8mm 3.0mm 33.0mm 156g<br />
flat toP adjuStable Rail SuPPoRt AISI 316<br />
∙ a satin (180g) finished modular <strong>handrail</strong> component.<br />
∙ heavy duty cast components are also suitable for use on commercial sites.<br />
∙ epoxy glue, pop rivet or weld the fittings together.<br />
Code <strong>Tube</strong> Ø Wall A B H I Weight<br />
st-315aP 2.0in 1.5mm 66.0mm 50.8mm 50.0mm 6.0mm 375g<br />
For more information call 0508 782 465 or visit www.st<strong>stainless</strong>.co.nz<br />
H<br />
I Ø<br />
I Ø<br />
A<br />
B<br />
A<br />
C<br />
B<br />
C<br />
H<br />
H<br />
L<br />
Round inline SquaRe PoSt ReduceR AISI 316<br />
∙ a satin (180g) finished modular <strong>handrail</strong> component, for square intermediate<br />
posts with a round <strong>handrail</strong>.<br />
∙ heavy duty cast components are also suitable for use on commercial sites.<br />
∙ epoxy glue, pop rivet or weld the fittings together.<br />
Code <strong>Tube</strong> Ø Wall A H L R W Weight<br />
st-2020 2.0in 1.5mm 50.8mm 66.0mm 33.0mm 2.0in 12.0mm 254g<br />
Round adjuStable SquaRe PoSt ReduceR AISI 316<br />
∙ a satin (180g) finished modular <strong>handrail</strong> component, for square posts with<br />
an angled round <strong>handrail</strong>.<br />
∙ heavy duty cast components are also suitable for use on commercial sites.<br />
∙ epoxy glue, pop rivet or weld the fittings together.<br />
Code <strong>Tube</strong> Ø Wall A H L R W Weight<br />
st-2021 2.0in 1.5mm 50.8mm 66.0mm 33.0mm 2.0in 16.0mm 293g<br />
Round 90° coRneR SquaRe PoSt ReduceR AISI 316<br />
∙ a satin (180g) finished modular <strong>handrail</strong> component, for square 90°<br />
corner posts with a round <strong>handrail</strong>.<br />
∙ heavy duty cast components are also suitable for use on commercial sites.<br />
∙ epoxy glue, pop rivet or weld the fittings together.<br />
Code <strong>Tube</strong> Ø Wall A H L R W Weight<br />
st-2022 2.0in 1.5mm 50.8mm 66.0mm 33.0mm 2.0in 12.0mm 309g<br />
L<br />
L<br />
L<br />
W Ø<br />
W Ø<br />
W Ø<br />
R<br />
R<br />
A<br />
A<br />
R<br />
A<br />
H<br />
H<br />
H<br />
squAre rAnge 17
glAss clAmps<br />
18<br />
GC-300 GC-301<br />
Small ‘d’ tyPe glaSS clamP (Satin) AISI 316<br />
∙ Satin surface finish clamps to suit 6.0 and 8.0mm <strong>glass</strong>.<br />
H<br />
∙ fix these to the posts with blind rivet nuts and cap screws.<br />
∙ the clamps can support approximately 60-80kgs per 2 clamps which D are vertically positioned.<br />
∙ Please order the gaskets to suit the appropriate <strong>glass</strong>.<br />
Code<br />
gC-300<br />
Suit Glass<br />
6.0mm, 8.0mm<br />
Suit Post<br />
square/Flat<br />
H<br />
40.0mm<br />
L<br />
50.0mm<br />
W<br />
23.0mm<br />
T<br />
W<br />
16.0mm<br />
LD<br />
9.0mm<br />
Sold<br />
each<br />
gC-301 6.0mm, 8.0mm 2.0in round 40.0mm 50.0mm 23.0mm 16.0mm 9.0mm each<br />
MGC-300 MGC-301<br />
Small ‘d’ tyPe glaSS clamP (miRRoR) AISI 316<br />
∙ mirror surface finish clamps to suit 6.0 and 8.0mm <strong>glass</strong>.<br />
H<br />
∙ fix these to the posts with blind rivet nuts and cap screws.<br />
∙ the clamps can support approximately 60-80kgs per 2 clamps which D are vertically positioned.<br />
∙ Please order the gaskets to suit the appropriate <strong>glass</strong>.<br />
Code<br />
mgC-300<br />
Suit Glass<br />
6.0mm, 8.0mm<br />
Suit Post<br />
square/Flat<br />
H<br />
40.0mm<br />
L<br />
50.0mm<br />
W<br />
23.0mm<br />
T<br />
W<br />
16.0mm<br />
LD<br />
9.0mm<br />
Sold<br />
each<br />
mgC-301 6.0mm, 8.0mm 2.0in round 40.0mm 50.0mm 23.0mm 16.0mm 9.0mm each<br />
GC-310 GC-311 MGC-320 MGC-321<br />
T<br />
medium ‘d’ tyPe glaSS clamP (Satin) AISI 316<br />
∙ Satin surface finish clamps to suit 6.0, 8.0 and 10.0mm <strong>glass</strong>.<br />
∙ fix these to the posts with blind rivet nuts and cap screws.<br />
∙ the clamps can support approximately 60-80kgs per 2 clamps which are vertically positioned.<br />
∙ Please order the gaskets to suit the appropriate <strong>glass</strong>.<br />
Code Suit Glass Suit Post H L W T D Sold<br />
gC-310 6.0, 8.0, 10.0mm square/Flat 45.0mm 63.0mm 26.0mm 16.0mm 9.0mm each<br />
gC-311 6.0, 8.0, 10.0mm 2.0in round 45.0mm 63.0mm 26.0mm 16.0mm 9.0mm each<br />
D<br />
D<br />
D<br />
D<br />
W<br />
T<br />
T<br />
W<br />
T<br />
T<br />
W<br />
T<br />
W<br />
L<br />
L<br />
L<br />
L<br />
H<br />
H<br />
H<br />
H<br />
MGC-310 MGC-311<br />
medium ‘d’ tyPe glaSS clamP (miRRoR) AISI 316<br />
∙ mirror surface finish clamps to suit 6.0, 8.0 and 10.0mm <strong>glass</strong>.<br />
H<br />
∙ fix these to the posts with blind rivet nuts and cap screws.<br />
∙ the clamps can support approximately 60-80kgs per 2 clamps which D are vertically positioned.<br />
∙ Please order the gaskets to suit the appropriate <strong>glass</strong>.<br />
Code<br />
mgC-310<br />
Suit Glass<br />
6.0, 8.0, 10.0mm<br />
Suit Post<br />
square/Flat<br />
H<br />
45.0mm<br />
L<br />
63.0mm<br />
W<br />
26.0mm<br />
T<br />
W<br />
16.0mm<br />
LD<br />
9.0mm<br />
Sold<br />
each<br />
mgC-311 6.0, 8.0, 10.0mm 2.0in round 45.0mm 63.0mm 26.0mm 16.0mm 9.0mm each<br />
GC-320 GC-321<br />
laRge ‘d’ tyPe glaSS clamP (Satin) AISI 316<br />
∙ Satin surface finish clamps to suit 8.0, 10.0 and 12.0mm <strong>glass</strong>.<br />
H<br />
∙ fix these to the posts with blind rivet nuts and cap screws.<br />
∙ the clamps can support approximately 60-80kgs per 2 clamps which D are vertically positioned.<br />
∙ Please order the gaskets to suit the appropriate <strong>glass</strong>.<br />
Code<br />
gC-320<br />
Suit Glass<br />
8.0, 10.0, 12.0mm<br />
Suit Post<br />
square/Flat<br />
H<br />
55.0mm<br />
L<br />
60.0mm<br />
W<br />
32.0mm<br />
T<br />
W<br />
16.0mm<br />
LD<br />
9.0mm<br />
Sold<br />
each<br />
gC-321 8.0, 10.0, 12.0mm 2.0in round 55.0mm 60.0mm 32.0mm 16.0mm 9.0mm each<br />
laRge ‘d’ tyPe glaSS clamP (miRRoR) AISI 316<br />
∙ mirror surface finish clamps to suit 8.0, 10.0 and 12.0mm <strong>glass</strong>.<br />
∙ fix these to the posts with blind rivet nuts and cap screws.<br />
∙ the clamps can support approximately 60-80kgs per 2 clamps which are vertically positioned.<br />
∙ Please order the gaskets to suit the appropriate <strong>glass</strong>.<br />
Code Suit Glass Suit Post H L W T D Sold<br />
mgC-320 8.0, 10.0, 12.0mm square/Flat 55.0mm 60.0mm 32.0mm 16.0mm 9.0mm each<br />
mgC-321 8.0, 10.0, 12.0mm 2.0in round 55.0mm 60.0mm 32.0mm 16.0mm 9.0mm each<br />
D<br />
D<br />
D<br />
D<br />
Alternate products may be available.<br />
T<br />
W<br />
T<br />
T<br />
W<br />
T<br />
W<br />
T<br />
T<br />
W<br />
L<br />
L<br />
L<br />
L<br />
H<br />
H<br />
H<br />
H
GC-310-L GC-311-L<br />
T<br />
medium ‘d’ tyPe left hand SuPPoRt glaSS clamP (Satin) AISI 316<br />
∙ Satin surface finish clamps to suit 6.0, 8.0 and 10.0mm <strong>glass</strong>, with a left hand corner<br />
<strong>glass</strong> hold for supporting <strong>glass</strong>.<br />
∙ a unique design to stop slippage of excessively heavy panels of <strong>glass</strong>. D<br />
∙ fix these to the posts with blind rivet nuts and cap screws.<br />
∙ Please order the gaskets to suit the appropriate <strong>glass</strong>.<br />
H<br />
Code Suit Glass Hold Suit Post H L W<br />
W<br />
T<br />
L<br />
D Sold<br />
gC-310-l 6.0, 8.0, 10.0mm l/h square/Flat 45.0mm 63.0mm 26.0mm 16.0mm 9.0mm each<br />
gC-311-l 6.0, 8.0, 10.0mm l/h 2.0in round 45.0mm 63.0mm 26.0mm 16.0mm 9.0mm each<br />
MGC-310-L MGC-311-L<br />
medium ‘d’ tyPe left hand SuPPoRt glaSS clamP (miRRoR) AISI 316<br />
∙ mirror surface finish clamps to suit 6.0, 8.0 and 10.0mm <strong>glass</strong>, with a left hand corner<br />
<strong>glass</strong> hold for supporting <strong>glass</strong>.<br />
∙ a unique design to stop slippage of excessively heavy panels of <strong>glass</strong>.<br />
∙ fix these to posts with blind rivet nuts and cap screws.<br />
∙ Please order the gaskets to suit the appropriate <strong>glass</strong>.<br />
Code Suit Glass Hold Suit Post H L W T D Sold<br />
mgC-310-l 6.0, 8.0, 10.0mm l/h square/Flat 45.0mm 63.0mm 26.0mm 16.0mm 9.0mm each<br />
mgC-311-l 6.0, 8.0, 10.0mm l/h 2.0in round 45.0mm 63.0mm 26.0mm 16.0mm 9.0mm each<br />
GC-210 GC-211<br />
Small SquaRe tyPe glaSS clamP (Satin) AISI 316<br />
∙ Satin surface finish clamps to suit 6.0 and 8.0mm <strong>glass</strong>.<br />
∙ fix these to posts with blind rivet nuts and cap screws.<br />
∙ the clamps can support approximately 60-80kgs per 2 clamps which are vertically positioned.<br />
∙ Please order the gaskets to suit the appropriate <strong>glass</strong>.<br />
Code Suit Glass Suit Post H L W T D Sold<br />
gC-210 6.0mm, 8.0mm square/Flat 45.0mm 45.0mm 28.0mm 16.0mm 9.0mm each H<br />
gC-211 6.0mm, 8.0mm 2.0in round 45.0mm 45.0mm 28.0mm<br />
D<br />
16.0mm 9.0mm each<br />
For more information call 0508 782 465 or visit www.st<strong>stainless</strong>.co.nz<br />
D<br />
D<br />
D<br />
D<br />
W<br />
T<br />
T<br />
W<br />
T<br />
W<br />
W<br />
T<br />
T<br />
W<br />
L<br />
L<br />
L<br />
L<br />
L<br />
H<br />
H<br />
H<br />
H<br />
GC-310-R GC-311-R<br />
T<br />
medium ‘d’ tyPe Right hand SuPPoRt glaSS clamP (Satin) AISI 316<br />
∙ Satin surface finish clamps to suit 6.0, 8.0 and 10.0mm <strong>glass</strong>, with a right hand corner<br />
<strong>glass</strong> hold for supporting <strong>glass</strong>.<br />
∙ a unique design to stop slippage of excessively heavy panels of <strong>glass</strong>. D<br />
∙ fix these to posts with blind rivet nuts and cap screws.<br />
∙ Please order the gaskets to suit the appropriate <strong>glass</strong>.<br />
H<br />
Code Suit Glass Hold Suit Post H L W<br />
W<br />
T<br />
L<br />
D Sold<br />
gC-310-r 6.0, 8.0, 10.0mm r/h square/Flat 45.0mm 63.0mm 26.0mm 16.0mm 9.0mm each<br />
gC-311-r 6.0, 8.0, 10.0mm r/h 2.0in round 45.0mm 63.0mm 26.0mm 16.0mm 9.0mm each<br />
MGC-310-R MGC-311-R<br />
medium ‘d’ tyPe Right hand SuPPoRt glaSS clamP (miRRoR) AISI 316<br />
∙ mirror surface finish clamps to suit 6.0, 8.0 and 10.0mm <strong>glass</strong>, with a right hand corner<br />
<strong>glass</strong> hold for supporting <strong>glass</strong>.<br />
∙ a unique design to stop slippage of excessively heavy panels of <strong>glass</strong>.<br />
∙ fix these to posts with blind rivet nuts and cap screws.<br />
∙ Please order the gaskets to suit the appropriate <strong>glass</strong>.<br />
Code Suit Glass Hold Suit Post H L W T D Sold<br />
mgC-310-r 6.0, 8.0, 10.0mm r/h square/Flat 45.0mm 63.0mm 26.0mm 16.0mm 9.0mm each<br />
mgC-311-r 6.0, 8.0, 10.0mm r/h 2.0in round 45.0mm 63.0mm 26.0mm 16.0mm 9.0mm each<br />
MGC-210 MGC-211<br />
Small SquaRe tyPe glaSS clamP (miRRoR) AISI 316<br />
∙ mirror surface finish clamps to suit 6.0 and 8.0mm <strong>glass</strong>.<br />
∙ fix these to posts with blind rivet nuts and cap screws.<br />
∙ the clamps can support approximately 60-80kgs per 2 clamps which are vertically positioned.<br />
∙ Please order the gaskets to suit the appropriate <strong>glass</strong>.<br />
Code Suit Glass Suit Post H L W T D Sold<br />
mgC-210 6.0mm, 8.0mm square/Flat 45.0mm 45.0mm 28.0mm 16.0mm 9.0mm each H<br />
mgC-211 6.0mm, 8.0mm 2.0in round 45.0mm 45.0mm 28.0mm<br />
D<br />
16.0mm 9.0mm each<br />
D<br />
D<br />
D<br />
D<br />
W<br />
T<br />
T<br />
W<br />
T<br />
W<br />
W<br />
T<br />
T<br />
W<br />
L<br />
L<br />
L<br />
L<br />
L<br />
H<br />
H<br />
H<br />
H<br />
glAss clAmps 19
glAss clAmps<br />
20<br />
GC-200<br />
laRge SquaRe tyPe glaSS clamP (Satin) AISI 316<br />
∙ Satin surface finish clamps to suit 8.0, 10.0 and 12.0mm <strong>glass</strong>.<br />
∙ fix these to posts with blind rivet nuts and cap screws.<br />
∙ the clamps can support approximately 60-80kgs per 2 clamps which are vertically positioned.<br />
∙ Please order the gaskets to suit the appropriate <strong>glass</strong>.<br />
Code Suit Glass Suit Post H L W T D Sold<br />
gC-200 8.0, 10.0, 12.0mm square/Flat 55.0mm 55.0mm 32.0mm 16.0mm 9.0mm each H<br />
gC-201 8.0, 10.0, 12.0mm 2.0in round 55.0mm 55.0mm 32.0mm<br />
D<br />
16.0mm 9.0mm each<br />
MGC-200<br />
GC-201<br />
MGC-201<br />
laRge SquaRe tyPe glaSS clamP (miRRoR) AISI 316<br />
∙ mirror surface finish clamps to suit 8.0, 10.0 and 12.0mm <strong>glass</strong>.<br />
∙ fix these to posts with blind rivet nuts and cap screws.<br />
∙ the clamps can support approximately 60-80kgs per 2 clamps which are vertically positioned.<br />
∙ Please order the gaskets to suit the appropriate <strong>glass</strong>.<br />
Code Suit Glass Suit Post H L W T D Sold<br />
mgC-200 8.0, 10.0, 12.0mm square/Flat 55.0mm 55.0mm 32.0mm 16.0mm 9.0mm each H<br />
mgC-201 8.0, 10.0, 12.0mm 2.0in round 55.0mm 55.0mm 32.0mm<br />
D<br />
16.0mm 9.0mm each<br />
glaSS clamP nylon centRe Pin<br />
∙ an optional nylon centre pin for heavy <strong>glass</strong> panels.<br />
∙ hole drilling in the <strong>glass</strong> is required.<br />
Code Suit Clamp D L Sold<br />
gPn-310 gC-310, 311 6.0mm 24.0mm each<br />
gPn-320 gC-320, 321 6.0mm 26.0mm each<br />
gPn-200 gC-200, 201 6.0mm 21.0mm each<br />
D Ø<br />
D<br />
D<br />
T<br />
T<br />
W<br />
W<br />
T<br />
W<br />
T<br />
W<br />
L<br />
L<br />
L<br />
L<br />
L<br />
H<br />
H<br />
RubbeR gaSketS foR glaSS clamPS<br />
Code Suit Clamp Suit Glass Sold<br />
gg-210-06 gC-200, 201 6.0mm Pair<br />
gg-210-08 gC-200, 201 8.0mm Pair<br />
gg-200-08 gC-200, 201 8.0mm Pair<br />
gg-200-10 gC-200, 201 10.0mm Pair<br />
gg-200-12 gC-200, 201 12.0mm Pair<br />
RubbeR gaSketS foR glaSS clamPS<br />
Code Suit Clamp Suit Glass Sold<br />
gg-300-06 gC-300, 301 6.0mm Pair<br />
gg-300-08 gC-300, 301 8.0mm Pair<br />
gg-310-06 gC-310, 311-l 6.0mm Pair<br />
gg-310-08 gC-310, 311-l 8.0mm Pair<br />
gg-310-10 gC-310, 311-l 10.0mm Pair<br />
gg-310-06 gC-310, 311-r 6.0mm Pair<br />
gg-310-08 gC-310, 311-r 8.0mm Pair<br />
gg-310-10 gC-310, 311-r 10.0mm Pair<br />
gg-320-08 gC-320, 321 8.0mm Pair<br />
gg-320-10 gC-320, 321 10.0mm Pair<br />
gg-320-12 gC-320, 321 12.0mm Pair<br />
Alternate products may be available.
STEP 1<br />
Drill a hole to suit the<br />
outside diameter of<br />
the blind rivet nut.<br />
STEP 2<br />
Insert the blind rivet<br />
nut into the post using<br />
a hand tool.<br />
STEP 3<br />
The installed blind rivet<br />
nut is ready for use.<br />
STEP 4<br />
Screw a button head cap<br />
screw into the blind rivet<br />
nut through the <strong>glass</strong><br />
clamp to fix half of the<br />
<strong>glass</strong> clamp to the post.<br />
STEP 5<br />
Install the appropriate<br />
rubber gaskets to<br />
both halves of the<br />
<strong>glass</strong> clamp.<br />
STEP 6<br />
Fit the <strong>glass</strong> into place<br />
and screw the second<br />
half of the <strong>glass</strong> clamp<br />
to hold the <strong>glass</strong>.<br />
blind Rivet nut hand tool<br />
∙ for fast insertion of <strong>stainless</strong> <strong>steel</strong> rivet nuts.<br />
∙ it comes complete with a quick threading unit and <strong>steel</strong> carry case, and also includes a full<br />
range of nose piece sizes.<br />
blind Rivet nut hand tool<br />
∙ for insertion of <strong>stainless</strong> <strong>steel</strong> rivet nuts in place-limited areas.<br />
∙ it comes complete with a <strong>steel</strong> carry case and a full range of nose piece sizes.<br />
Code Range<br />
ln-3 m5-m10<br />
blind Rivet nut Small flange AISI 304<br />
∙ blind rivet nut with a small flange to allow fittings to be joined to <strong>handrail</strong>s.<br />
∙ install with blind Rivet nut hand tool ln-2 or ln-3.<br />
Code T Drill D L H M Sold<br />
nin406 m6 9.0mm 9.0mm 14.0mm 0.5mm 10.0mm each<br />
nin408 m8 11.0mm 11.0mm 16.0mm 0.7mm 12.0mm each<br />
blind Rivet nut laRge flange AISI 304<br />
∙ blind rivet nut with a large flange to allow <strong>glass</strong> clamps to be joined to <strong>handrail</strong>s.<br />
∙ install with blind Rivet nut hand tool ln-2 or ln-3.<br />
Code T Drill D L H M Sold<br />
ninF406 m6 9.0mm 9.0mm 16.0mm 1.5mm 12.0mm each<br />
ninF408 m8 11.0mm 11.0mm 18.0mm 1.6mm 15.0mm each<br />
For more information call 0508 782 465 or visit www.st<strong>stainless</strong>.co.nz 21<br />
H<br />
H<br />
M T<br />
D<br />
L<br />
M T D<br />
L<br />
Code Range<br />
ln-2 m5-m10<br />
glAss clAmp instAllAtion
kleAnFlow stAnchions<br />
22<br />
heAvy duty<br />
RadiuSed handRail SuPPoRt without toP<br />
∙ a locally hand-made stanchion with an optional cover plate and 3 countersunk screw holes.<br />
heAvy duty<br />
Code A B D I Weight<br />
ahBsB 70.0mm 78.0mm 12.0mm 5.5mm 265g<br />
handRail SuPPoRt without toP<br />
∙ a locally hand-made stanchion with an optional cover plate and 2 countersunk screw holes.<br />
Code A B D I Weight<br />
ahBts 70.0mm 100.0mm 12.0mm 5.5mm 230g<br />
Specialist <strong>handrail</strong>s<br />
In some instances a balustrade project requires<br />
<strong>stainless</strong> <strong>steel</strong> materials not commonly available<br />
as a <strong>handrail</strong> fitting, or a completely new system<br />
is being constructed to a specification.<br />
<strong>Steel</strong> & <strong>Tube</strong> Stainless have an extensive<br />
range of industrial <strong>stainless</strong> products suitable<br />
for manufacturing.<br />
D Ø<br />
I Ø I Ø<br />
A<br />
D Ø<br />
I Ø I Ø<br />
A<br />
B<br />
B<br />
heAvy duty<br />
5mm baSe Plate<br />
∙ a locally hand-made stanchion with an optional cover plate.<br />
∙ includes 3 countersunk screw holes with a 12.0mm centre hole.<br />
heAvy duty<br />
Code A B I Weight<br />
ahBBO 70.0mm 5.0mm 5.5mm 140g<br />
coveRPlate foR a 5mm baSePlate<br />
∙ a locally hand-made cover plate to suit ahbSb, ahbtS and ahbb0.<br />
∙ includes 3 countersunk screw holes with a 12.0mm centre hole.<br />
Code A B I Weight<br />
ahBCP 72.0mm 15.0mm 13.5mm 30g<br />
Most industrial <strong>stainless</strong> products are available in 316<br />
grade for corrosive or marine environments, and all<br />
can be polished to achieve a mirror finish if required.<br />
Talk to your local branch representative or<br />
telephone 0508 782 465 for any requirements<br />
regarding tube, pipe, angle, bar, sheet or mesh<br />
products for a specification based design.<br />
I Ø<br />
B<br />
B<br />
I Ø<br />
A<br />
A
support oFFice<br />
8 westfield Place, mt wellington<br />
Po box 22 023, otahuhu, auckland<br />
Freephone 0508 372 293<br />
T 09 573 2400 F 09 573 2422<br />
E aksales@st<strong>stainless</strong>.co.nz<br />
AucklAnd<br />
8 westfield Place, mt wellington<br />
Po box 22 023, otahuhu, auckland<br />
Freephone 0508 372 293<br />
T 09 573 2400 F 09 573 2422<br />
E aksales@st<strong>stainless</strong>.co.nz<br />
hAmilton<br />
32 maui Street, Pukete industrial estate<br />
Po box 20 468, te Rapa, hamilton<br />
Freephone 0508 478 575<br />
T 07 849 5220 F 07 849 5991<br />
E hnsales@st<strong>stainless</strong>.co.nz<br />
new plymouth<br />
40 corbett Road, bell block<br />
Po box 7028, new Plymouth<br />
T 06 755 9993 F 06 755 9998<br />
E npsales@st<strong>stainless</strong>.co.nz<br />
pAlmerston north<br />
84 armstrong Street, Palmerston north<br />
Po box 4022, Palmerston north<br />
Freephone 0508 736 969<br />
T 06 355 2333 F 06 355 2223<br />
E pnsales@st<strong>stainless</strong>.co.nz<br />
nelson<br />
2/74 quarantine Road, tahunanui<br />
Po box 2037, Stoke, nelson<br />
T 03 547 4444 F 03 547 3334<br />
E nlsales@st<strong>stainless</strong>.co.nz<br />
christchurch<br />
8 cable Street, Sockburn<br />
Po box 16 413, hornby, christchurch<br />
Freephone 0508 731 173<br />
T 03 343 0606 F 03 343 0605<br />
E chsales@st<strong>stainless</strong>.co.nz<br />
invercArgill<br />
20a bond Street, invercargill<br />
Po box 1165, invercargill<br />
T 03 214 3666 F 03 214 3660<br />
E insales@st<strong>stainless</strong>.co.nz<br />
invercargill<br />
christchurch<br />
nelson<br />
auckland<br />
new Plymouth<br />
Palmerston north<br />
hamilton<br />
<strong>Steel</strong> & <strong>Tube</strong> Stainless have seven branches<br />
throughout New Zealand. Each branch handles<br />
customer service enquiries and stock supply.<br />
For more information call 0508 782 465<br />
or visit us at www.st<strong>stainless</strong>.co.nz<br />
brAnch detAils<br />
23
A DIVISION OF STEEL & TUBE HOLDINGS LIMITED<br />
8 Westfield Place, Mt Wellington, Auckland, New Zealand<br />
PO Box 22 023, Otahuhu, Auckland, New Zealand<br />
Telephone: 09 573 2400 Facsimile: 09 573 2422<br />
0508 782 465 www.st<strong>stainless</strong>.co.nz<br />
Alternate products may be available.