Anti-Heeling System - Hoppe Marine

Anti-Heeling System
www.hoppe-marine.com
System Overview
The Anti-Heeling System is designed for the continuous
compensation of the ship’s heel during all kinds of
loading operations in port and during offshore operations.
With over 20 years of experience, our systems have been
installed on different types of container, heavy lift, offshore
supply and construction vessels. Special heel control on
sailing ships for wind load compensation on cruise course
or ice heeling on ice breakers round up the wide range of
Anti-Heeling System applications.
The heeling compensation of the system is achieved
by pumping ballast water or other fl uids between the
heeling tanks using reversible propeller pumps as well
as applications with centrifugal pumps. Pneumatically
controlled butterfl y valves are standard parts of the
Anti-Heeling System.
The state of the art PLC unit HOMIP with integrated
6” touch screen display offers user-friendly operation
Ship Management Systems
Remote
Valves
Ethernet/RS485 System Bus
Starter Cabinet /
Substation with I/O-Modules
Heeling
Pump
via customised screen layouts. It is designed for automatic
or manual heel control and can be connected to the ship
management system via Ethernet or RS 485 interface.
Level
Switches
Key Features
• Simple operation and
clear visualisation
• Pump dry-running
protection
• Heel compensation for
operations at sea
• Major components are
in-house designed and
engineered
• Control and measuring
devices are class
type approved
Control Unit
HOMIP
Hoppe Stability Test System
Ship Inertial
Measuring
HOSIM