Home Appliance Electronic Control Devices - SmartData
Home Appliance Electronic Control Devices - SmartData
Home Appliance Electronic Control Devices - SmartData
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Printed on 100% Recycled Paper<br />
Ordering number:EP122<br />
TOKYO OFFICE<br />
Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN<br />
Telephone: 81-(0)3-3837-6339, 6340, 6342, Facsimile: 81-(0)3-3837-6377<br />
SANYO Electric Co.,Ltd. Semiconductor Company <strong>Home</strong>page<br />
URL; http://www.semic.sanyo.co.jp/index_e.htm<br />
This catalog provides information as of November, 2004.<br />
Specifications and information herein are subject to change without notice.<br />
Printed in Japan / November 2004 2k OTE<br />
<strong>Home</strong> <strong>Appliance</strong><br />
<strong>Electronic</strong> <strong>Control</strong> <strong>Devices</strong><br />
'04-11
SANYO Provides<br />
Optimal <strong>Devices</strong> for<br />
<strong>Home</strong> <strong>Appliance</strong>s.<br />
These products include hybrid ICs using SANYO's insulated metal<br />
substrate technology (IMST) and active filter ICs that are optimal for<br />
high-frequency control and improved power factor.<br />
Low-cost flash memory microcontrollers using standard cores.<br />
Extensive lineup of motor driver ICs to support end-user product lines.<br />
These SANYO products support energy savings and end products that<br />
provide a comfortable and pleasant everyday life.<br />
•Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support<br />
systems,aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO<br />
representative nearest you before using any SANYO products described or contained herein in such applications.<br />
•SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating<br />
condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.<br />
•Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state,<br />
and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states<br />
that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment.<br />
•SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these<br />
probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When<br />
designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error<br />
prevention circuits for safe design, redundant design, and structural design.<br />
•In the event that any or all SANYO products(including technical data, services) described or contained herein are controlled under any of applicable local export control laws and<br />
regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law.<br />
•No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or<br />
retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd.<br />
•Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the<br />
"Delivery Specification" for the SANYO product that you intend to use.<br />
•Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and<br />
reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.<br />
System chip sets<br />
Air Conditioners 4<br />
Refrigerators 5<br />
Microwave Ovens 6<br />
Drum Type Washer/Dryers 7<br />
Inverter Powered Washing Machines 8<br />
Vacuum Cleaners 9<br />
Dishwashers 10<br />
Air Cleaners 11<br />
Motor Driver ICs<br />
Lineup 12<br />
Motor Drivers 14<br />
LB11920 14<br />
LB1975/76 15<br />
LB11988/V/H/HR 16<br />
LB11683V 17<br />
LB11977V 18<br />
LB11820M 19<br />
LB11695M 20<br />
LB11690/H 21<br />
LB1930M 22<br />
LB1948M 23<br />
LB1644 24<br />
LB1645N 25<br />
LB11862M 26<br />
LB11965M 27<br />
LB1668M 28<br />
Driver arrays 29<br />
LB1205 29<br />
LB1233M 29<br />
LB1235 30<br />
LB1710 30<br />
LB1731 31<br />
Power supply ICs 32<br />
L88R05 32<br />
L78LR05 32<br />
LA5761/62/63 33<br />
LA5751/52/53 33<br />
Microcontrollers<br />
Lineup 34<br />
8-Bit Microcontrollers 36<br />
Hybrid ICs<br />
3-phase motor driver inverter power ICs 38<br />
Improved power factor active filter ICs 40<br />
Discrete <strong>Devices</strong><br />
Power Device Series 42
4<br />
Air Conditioners Refrigerators<br />
············New product<br />
············Under development<br />
Indoor unit Outdoor unit<br />
Motor driver block<br />
Louver motor<br />
Power supply block<br />
Various power<br />
supplies<br />
Display block<br />
LED<br />
Remote control<br />
Louver motor driver<br />
LB1233M<br />
LB1930M<br />
LB1948M<br />
DC fan motor<br />
Motor driver<br />
Low-voltage type (single-chip driver)<br />
LB11920<br />
LB1975/76<br />
High-voltage type (predriver)<br />
LB11820M<br />
LB11695M<br />
MOSFETs<br />
250 V MOSFETs<br />
P-channel: 2SJ281<br />
N-channel: 2SK-2530<br />
Temperature and<br />
humidity sensor<br />
amplifiers<br />
LCD<br />
To the individual<br />
blocks<br />
Display circuit<br />
Optical receiver<br />
module<br />
SPS-446X<br />
Remote control<br />
microcontroller<br />
LC5874XX<br />
(Or other<br />
microcontroller)<br />
Main block<br />
Indoor unit<br />
microcontroller<br />
LC8757XX<br />
LC8754XX<br />
(8-bit<br />
microcontrollers)<br />
Reset IC<br />
Buzzer<br />
Ion generator<br />
Temperature,<br />
humidity,<br />
and other<br />
sensor amplifiers<br />
Main block<br />
Current sensor,<br />
outdoor temperature sensor,<br />
heat exchanger temperature sensor<br />
Outdoor unit microcontroller Reset IC<br />
Inverter<br />
module<br />
hybrid IC<br />
STK62X<br />
series<br />
Compressor<br />
Compressor block<br />
To the individual<br />
blocks<br />
DC fan motor<br />
Motor drivers<br />
High-voltage type<br />
(predriver)<br />
LB11820M<br />
LB11695M<br />
MOSFETs<br />
250 V MOSFETs<br />
P-channel: 2SJ281<br />
N-channel: 2SK-2530<br />
Fan and valve block<br />
Power supply block<br />
Power supply<br />
Active filter<br />
STK76X series<br />
Transistor<br />
driver array<br />
(or relay)<br />
LB1710<br />
LB1233M<br />
Four-way valve<br />
(Two-way valve)<br />
············New product<br />
············Under development<br />
Main block<br />
Motor driver block Main block<br />
Cold air<br />
regulation<br />
Cold air flow<br />
adjustment<br />
Coolant flow<br />
control<br />
Automatic<br />
ice maker<br />
Stepping<br />
motor driver<br />
LB1948M<br />
4-channel<br />
transistor<br />
driver array<br />
LB1235/M<br />
LB1205/M<br />
4-channel<br />
transistor<br />
driver array<br />
LB1235/M<br />
LB1205/M<br />
Forward/reverse<br />
motor driver<br />
LB1644<br />
LB1645N<br />
LB1948M<br />
Internal and external<br />
DC fan motors<br />
Motor drivers<br />
LB11988<br />
LB11683<br />
LB11977<br />
LB11965M<br />
LB11862M<br />
Main<br />
microcontroller<br />
LC8757XX<br />
LC8754XX<br />
Products that<br />
support<br />
10-bit A/D<br />
conversion<br />
(Under<br />
development)<br />
Transistor<br />
driver array<br />
LB1233M<br />
Dehumidifier heater<br />
Condensation<br />
prevention heater<br />
Refrigerator internal light<br />
Reset IC<br />
Buzzer<br />
Freezer sensors<br />
Refrigerator sensors<br />
Motors<br />
Middle freezer<br />
Defrosting<br />
Ice compartment<br />
Others<br />
Display block<br />
Display microcontroller<br />
LC8773XX<br />
LC8774XX<br />
Products that support<br />
10-bit A/D conversion<br />
(Under development)<br />
Sensors:<br />
external temperature, lamp<br />
Compressor block<br />
Reset IC<br />
To the individual<br />
blocks<br />
Inverter control<br />
microcontroller<br />
Power supply block<br />
System chip sets<br />
LCD panel<br />
Inverter module<br />
hybrid IC<br />
STK62X series<br />
Compressor<br />
MOSFET<br />
2SK2618LS<br />
DC/DC converter<br />
LA5761/62<br />
Power supply circuit<br />
(three-terminal regulator)<br />
L78LR05D, L88R05<br />
5
6<br />
Microwave Ovens Drum Type Washer/Dryers<br />
············New product<br />
············Under development<br />
Motor driver block Key input block<br />
Heater flapper motor<br />
(hot air system)<br />
DC fan motor<br />
(cooling system)<br />
Blower motor (AC)<br />
(cooling system)<br />
Antenna motor<br />
(under the tray)<br />
IR motor<br />
(reciprocating motion)<br />
Heater<br />
Forward/reverse<br />
motor driver<br />
LB1640<br />
LB1645N<br />
Motor drivers<br />
LB11862M<br />
LB1668M<br />
Driver or transistor<br />
Driver or transistor<br />
Driver or transistor<br />
Inverter circuit<br />
Inverter block<br />
Key input interface Display circuit LED<br />
Main block<br />
LCD microcontroller<br />
LC8774XX<br />
To the individual<br />
blocks<br />
Power supply block<br />
Display circuit LED<br />
LCD<br />
Comparator circuit<br />
Power supply<br />
IR<br />
sensor<br />
············New product<br />
············Under development<br />
Main block<br />
Main switch<br />
Reset IC<br />
Heater<br />
Various sensors<br />
and thermistors<br />
(Dryer temperature<br />
control)<br />
Bathwater<br />
pump<br />
Motor driver<br />
Sensorless motor<br />
controller<br />
Blower<br />
Main<br />
microcontroller<br />
(General<br />
purpose)<br />
LC875JXX<br />
LC8755XX<br />
Drivers<br />
Water supply and<br />
draining control<br />
based door lock<br />
Display block<br />
Key input<br />
interface<br />
Inverter block<br />
Various<br />
sensors<br />
General-purpose microcontroller<br />
LC875GXX<br />
(High breakdown voltage)<br />
LC8763XX<br />
Inverter control microcontroller<br />
LC88XXXX<br />
Reset IC Drum lock<br />
Power supply block<br />
To the individual blocks Power supply<br />
Display circuit<br />
(LED)<br />
Drivers<br />
LCD<br />
Inverter module<br />
hybrid IC<br />
STK62X series<br />
Drum motor<br />
System chip sets<br />
7
8<br />
Inverter Powered Washing Machines Vacuum Cleaners<br />
············New product<br />
············Under development<br />
Main block<br />
Main switch<br />
Reset IC<br />
Blower<br />
Various sensors<br />
Thermistors<br />
(Dryer temperature<br />
control)<br />
Drivers<br />
Water supply and<br />
draining control<br />
Door lock<br />
Heater<br />
Bathwater pump<br />
Main microcontroller<br />
(General<br />
purpose)<br />
LC87F5CXX<br />
LC87F5G32A<br />
LC875JXX<br />
LC8755XX<br />
(High breakdown<br />
voltage)<br />
LC8763XX<br />
Display block<br />
Drivers<br />
Inverter block<br />
Inverter control microcontroller<br />
LC88XXXX<br />
Reset IC<br />
Various<br />
sensors<br />
Power supply block<br />
Display circuit<br />
(LED/lamp)<br />
To the individual blocks Power supply<br />
Inverter module<br />
hybrid IC<br />
STK62X series<br />
Drum motor<br />
············New product<br />
············Under development<br />
Main block Switch board<br />
Thermistor<br />
(motor protection)<br />
Microcontroller<br />
LC875G08A<br />
Current detection<br />
circuit<br />
(sensor)<br />
Triac<br />
Main motor (AC motor)<br />
Main motor (DC motor)<br />
Motor drivers<br />
High-voltage type (predriver)<br />
LB11820M<br />
LB11695M<br />
LB11690/H<br />
MOSFETs<br />
250 V MOSFETs<br />
P-channel: 2SJ281<br />
N-channel: 2SK-2530<br />
Intake (brush) block<br />
Display block<br />
Current detection<br />
circuit<br />
(sensor)<br />
Display circuit<br />
(LED)<br />
Key input interface<br />
Turbo brush<br />
Transistor or triac<br />
(H bridge driver)<br />
Power supply block<br />
To the individual blocks Power supply<br />
System chip sets<br />
9
10<br />
Dishwashers<br />
············New product<br />
············Under development<br />
Motor block Main block<br />
Pump motors<br />
(washing and draining)<br />
DC blower motor<br />
(drying)<br />
Water supply pump<br />
Heater<br />
Thermistor<br />
Water level<br />
monitoring switch<br />
DC brushless motor drivers<br />
Low-voltage type (single-chip driver)<br />
LB11920<br />
High-voltage type (predriver)<br />
LB11820M<br />
LB11695M<br />
LB11690/H<br />
MOSFETs<br />
250 V MOSFETs<br />
P-channel: 2SJ281<br />
N-channel: 2SK-2530<br />
DC brushless motor drivers<br />
Low-voltage type (single-chip driver)<br />
LB11920<br />
High-voltage type (predriver)<br />
LB11820M<br />
LB11695M<br />
LB11690/H<br />
MOSFETs<br />
250 V MOSFETs<br />
P-channel: 2SJ281<br />
N-channel: 2SK-2530<br />
Driver array<br />
Relay<br />
Optical sensor<br />
Inverter module<br />
hybrid IC<br />
STK62X series<br />
Microcontroller<br />
LC875G32A<br />
Key input interface<br />
(Dry/sequence/start)<br />
Power supply block<br />
To the various blocks Power supply<br />
Display circuit<br />
(LED)<br />
Buzzer<br />
Air Cleaners<br />
············New product<br />
············Under development<br />
Main block<br />
Reset IC Buzzer<br />
Dust sensor<br />
Sensor block<br />
Microcontroller<br />
LC875G08A<br />
Key input<br />
interface<br />
Switch block<br />
Display circuit<br />
(LED)<br />
Optical<br />
receiver<br />
module<br />
Ion generator<br />
Ion generator unit<br />
Remote control block<br />
Inverter block<br />
Microcontroller<br />
LC5874XX<br />
DC fan motor<br />
(quite operation is crucial)<br />
DC brushless motor driver<br />
LB11988<br />
Power supply block<br />
LCD<br />
To the various blocks Power supply<br />
System chip sets<br />
11
12<br />
Motor Driver ICs<br />
Lineup<br />
: Printed circuit board included<br />
Product No. Package<br />
Supply voltage<br />
<strong>Control</strong> system Motor system<br />
Vcc(V) VM(V)<br />
Output current<br />
Io max<br />
(A)<br />
Drive type<br />
Constraint protection Current limiter<br />
Functions and features<br />
Undervoltage protection Braking Forward/reverse FG output TSD<br />
Notes<br />
Three-phase brushless motor driver ICs (single chip)<br />
LB11920 DIP28H<br />
7<br />
35<br />
3.5<br />
Short circuit<br />
LB1975<br />
LB1976<br />
DIP28H<br />
DIP28H<br />
7<br />
60<br />
46<br />
2.5<br />
Direct PWM drive<br />
LB11988 DIP18<br />
LB11988V<br />
LB11988H<br />
SSOP24J<br />
HSOP28H<br />
5~22 7~22<br />
1 Current linear drive<br />
LB11988HR HSOP28HC<br />
LB11683V SSOP24J 7~13.8<br />
7~1.5<br />
1.5 Current linear drive<br />
LB11983 DIP20<br />
7~13.8<br />
1 Current linear drive<br />
Sensorless<br />
LB11977V DIP18<br />
7~18<br />
1 Soft Switching Direct PWM drive<br />
Sensorless, PWM control<br />
Three-phase brushless motor driver ICs (predriver ICs)<br />
LB11820M<br />
LB11695M<br />
SOP30S<br />
14.5(20)<br />
0.04 Direct PWM drive<br />
Short circuit<br />
Built-in PWM control circuit (control voltage or pulse input)<br />
LB11690<br />
LB11690H<br />
DIP30SD<br />
HSOP36<br />
45<br />
45<br />
0.04 Direct PWM drive<br />
Supports use of external high and low side n-channel MOSFETs<br />
Product No. Package Channels<br />
Function modes<br />
Open<br />
Braking<br />
Supply voltage<br />
Vcc(V)<br />
Output current<br />
Io max(A)<br />
Allowable power dissipation<br />
Pd max(W)<br />
Functions and features<br />
TSD<br />
Variable output<br />
Notes<br />
Forward/reverse motor drivers<br />
LB1930M MFP14S<br />
1<br />
2.2~10.8<br />
1.0<br />
0.8<br />
Low saturation voltage output H bridge<br />
LB1948M MFP10S<br />
2<br />
2.5~16<br />
0.8/CH<br />
0.87<br />
Low saturation voltage output H bridge, supports stepping motor drive<br />
LB1644 DIP16F<br />
2<br />
7~25<br />
1.0/CH<br />
1.44<br />
Supports stepping motor drive<br />
LB1645N SIP10F<br />
1<br />
7~18<br />
1.6<br />
2.2<br />
Product No. Package Supply voltage<br />
Vcc(V)<br />
Output current<br />
Io max(A)<br />
Allowable power<br />
dissipation<br />
Pd max(W)<br />
Drive type<br />
FG output<br />
RD output<br />
Functions and features<br />
Constraint protection S/S<br />
TSD<br />
Notes<br />
Single-phase full-wave drive fan motor drivers<br />
LB11862M MFP10S<br />
3.8~16.8<br />
0.8<br />
0.8 Switching drive<br />
(Automatic recovery)<br />
Single-phase bipolar drive, built-in kickback absorption circuit<br />
LB11965M MFP14S<br />
4.5~16<br />
1.0<br />
0.8 Direct PWM drive<br />
(Automatic recovery)<br />
Supports standby, low speed, and full speed variable speed control by an external signal<br />
Two-phase half-wave fan motor drivers<br />
LB1668M MFP14S<br />
Internal<br />
1.5<br />
1.1 Switching drive<br />
(Automatic recovery)<br />
Product No. Package Input Output<br />
Output voltage Output current<br />
Pd/TA<br />
Circuit<br />
Vout(V)<br />
Iout(mA)<br />
(mW/˚C)<br />
Driver array<br />
LB1205<br />
LB1233M<br />
LB1235M<br />
LB1710<br />
LB1731<br />
DIP16F<br />
MFP16<br />
DIP16F<br />
DIP16<br />
DIP16F<br />
Product No. Package<br />
Power supply IC<br />
L88R05<br />
L78LR05<br />
LA5761<br />
LA5762<br />
LA5763<br />
LA5751<br />
LA5752<br />
LA5753<br />
TO220-5H<br />
TP5H<br />
TO220-5H<br />
TO220-5H<br />
TO220-5H<br />
TO220-5H<br />
TO220-5H<br />
TO220-5H<br />
L<br />
H<br />
H<br />
L<br />
L<br />
Regulator<br />
voltage/current<br />
5V/1A<br />
5V/150mA<br />
3V/2A<br />
5V/2A<br />
12V/3A<br />
3.3V/3A<br />
5V/3A<br />
12V/3A<br />
Sink<br />
Sink<br />
Sink<br />
Sink<br />
Sink<br />
Input voltage<br />
(V)<br />
18<br />
25<br />
45<br />
45<br />
45<br />
45<br />
45<br />
45<br />
65<br />
50<br />
65<br />
50<br />
85<br />
1500<br />
500<br />
1500<br />
400<br />
1500<br />
1900/25<br />
390/25<br />
1900/25<br />
1500/25<br />
1900/25<br />
4<br />
7<br />
7<br />
7<br />
4<br />
Motor drivers<br />
Notes on Package Types and Naming<br />
The package names used in this documentation are designed to indicate rough<br />
classification of the packages used, and do not necessarily indicate the formal name of<br />
each individual package. Refer to the delivery specifications document for the particular<br />
product for the package dimensions figure and the formal name of the package.<br />
13
14<br />
LB11920<br />
LB1975/76<br />
Three-phase brushless motor driver IC Three-phase brushless motor driver IC<br />
Applications<br />
Motor drive in applications in which support for a wide range of supply voltages (9.5 to 30 V) and<br />
support for control based on the PWM duty of an input signal are advantageous.<br />
Functions and Features<br />
Three-phase bipolar drive (35 V, 3.5 A), can<br />
be used with a signal power supply (just the<br />
motor power supply).<br />
Direct PWM drive output<br />
Built-in output high and low side kickback<br />
absorption diodes<br />
Braking function (short-circuit braking)<br />
Forward/reverse switching circuit<br />
5V VCC<br />
+<br />
GND1<br />
GND3<br />
TOC<br />
PWM<br />
PWM<br />
OSC<br />
RESET<br />
VREF<br />
S/S<br />
-<br />
+<br />
PWM<br />
IN<br />
F/R<br />
LVSD<br />
BR<br />
S/S PWMIN F/R BR HP<br />
Vcc<br />
N1<br />
Full complement of built-in protection circuits,<br />
including current limiter circuit, undervoltage<br />
protection circuit, motor constraint protection<br />
circuit, and thermal protection circuit<br />
Motor operation can be controlled by the<br />
duty of the input PWM signal.<br />
FG output circuit<br />
Package: DIP28H<br />
CSD<br />
CIRUIT<br />
HALL HYS AMP<br />
N2<br />
CSD<br />
HALL LOGIC<br />
+<br />
LOGIC<br />
N3<br />
TSD<br />
DRIVER<br />
CURR<br />
LIM<br />
GND2<br />
VM<br />
RF<br />
OUT1<br />
OUT2<br />
OUT3<br />
Rf<br />
27V<br />
+<br />
Applications<br />
Direct PWM drive for DC fan motors used in air conditioners and water heaters.<br />
Functions and Features<br />
Built-in shunt regulator circuit makes use<br />
with a single power supply (motor power<br />
supply only) possible.<br />
High breakdown voltage, high current<br />
LB1975: 45V/2.5A,<br />
LB1976: 60V/2.5A<br />
Direct PWM drive output<br />
Current limiter circuit<br />
VCC<br />
VCC Reg<br />
+<br />
LVSD STD<br />
VCTL<br />
+<br />
IN1<br />
IN2<br />
IN3<br />
VCTI<br />
VREG S/S F/R FG1 FG2<br />
Hys.Amp<br />
+<br />
-<br />
+<br />
-<br />
+<br />
-<br />
40kΩ<br />
31kΩ<br />
VCTL Amb<br />
-<br />
+<br />
2.35V<br />
VCREF VCOUT<br />
Logic<br />
PWM<br />
OSC<br />
Three built-in output high side diodes<br />
FG output circuit<br />
Package:<br />
LB1975: DIP28H<br />
LB1976: DIP28H<br />
Current<br />
Limiter<br />
OSC GND1 GND2 GND3<br />
0.5V<br />
VM<br />
OUT1<br />
OUT2<br />
OUT3<br />
RF<br />
+<br />
Rf<br />
Motor drivers<br />
VM<br />
15
16<br />
LB11988/V/H/HR<br />
LB11683V<br />
Three-phase brushless motor driver IC Three-phase brushless sensorless motor driver IC<br />
Applications<br />
Motor drive for DC fan motors used in refrigerators (internal and external fans) and similar<br />
products<br />
Functions and Features<br />
Three-phase full-wave current linear drive<br />
Current limiter circuit<br />
Output stage high and low side<br />
oversaturation prevention circuit<br />
Forward/reverse direction setting circuit<br />
Three built-in output high side diodes<br />
FG output circuit<br />
Thermal shutdown circuit<br />
UIN+<br />
VCC<br />
UIN-<br />
VIN+<br />
VIN-<br />
WIN+<br />
WIN-<br />
FR<br />
VCC<br />
+<br />
-<br />
+<br />
-<br />
+<br />
-<br />
Forward/reverse<br />
switching<br />
Bandgap 1.2V<br />
Reference<br />
voltage<br />
Hall input synthesis circuit<br />
(linear matrix)<br />
Synthesized output logarithmic<br />
compression block<br />
FC<br />
Differential<br />
distribution<br />
Current limiter<br />
TSD<br />
0.1µF<br />
Reverse logarithmic transformation<br />
& differential distribution<br />
Feedback amplifier<br />
+<br />
+<br />
+<br />
-<br />
LIMREF -<br />
GND<br />
Package:<br />
LB11988: DIP18<br />
LB11988V: SSOP24J<br />
LB11988H: HSOP28H<br />
LB11988HR: HSOP28HC<br />
-<br />
+<br />
UIN+<br />
UIN-<br />
+<br />
-<br />
High side saturation<br />
prevention control<br />
Drive distribution circuit<br />
and low side saturation<br />
prevention circuit<br />
+<br />
Schmitt amplifier<br />
+<br />
-<br />
FG<br />
amplifier<br />
13.6k 30k<br />
-<br />
+<br />
UOUT<br />
VOUT<br />
WOUT<br />
VCC<br />
5K<br />
FGOUT<br />
VS<br />
RF<br />
0.1µF<br />
x3<br />
0.5<br />
Applications<br />
Motor drive for DC fan motors used in refrigerators (internal and external fans) and similar<br />
products<br />
Functions and Features<br />
Three-phase sensorless drive<br />
Three-phase full-wave current linear drive<br />
Current limiter circuit<br />
Output stage high side saturation<br />
prevention circuit<br />
Forward/reverse direction setting circuit<br />
Three built-in output high side diodes<br />
Coil back EMF based FG output<br />
0.1µF<br />
BFGO<br />
C1<br />
C2<br />
PCOUT<br />
VCOIN<br />
CX<br />
FC<br />
Thermal shutdown<br />
circuit<br />
Startup<br />
control circuit<br />
PLL VCO<br />
200<br />
200<br />
+<br />
-<br />
Mask circuit<br />
Timing<br />
control circuit<br />
Rotor position<br />
detection circuit<br />
Divide-by-8<br />
circuit<br />
Beat lock<br />
prevention circuit<br />
+<br />
-<br />
Soft switching<br />
drive circuit<br />
200<br />
Output drive circuit<br />
Thermal shutdown circuit<br />
Beat lock prevention circuit<br />
Motor constrained protection circuit<br />
Package:<br />
LB11683V: SSOP24J<br />
High side saturation<br />
prevention control<br />
Lock protection circuit<br />
VCC<br />
MCON<br />
UOUT<br />
VOUT<br />
WOUT<br />
Motor drivers<br />
RF 0.5<br />
GND<br />
RD<br />
CT<br />
17
18<br />
LB11977V<br />
LB11820M<br />
Three-phase PWM sensorless motor driver IC Three-phase direct PWM drive brushless motor driver<br />
Applications Applications<br />
Motor drive for DC fan motors used in refrigerators (internal and external fans) and similar<br />
products<br />
Functions and Features<br />
Three-phase sensorless drive<br />
Three-phase full-wave current linear drive<br />
Current limiter circuit<br />
Output stage high side saturation prevention circuit<br />
Coil back EMF based FG output<br />
Thermal shutdown circuit<br />
Beat lock prevention circuit<br />
Package: SSOP24J<br />
5<br />
CT<br />
0.1µF<br />
PWM<br />
BFG<br />
C1<br />
C2<br />
PCOU<br />
VCOI<br />
CX<br />
VC<br />
FC<br />
Thermal shutdown<br />
circuit<br />
Startup control<br />
circuit<br />
OSC<br />
PLL VCO<br />
200<br />
200<br />
+<br />
-<br />
Mask circuit<br />
Timing control<br />
circuit<br />
Rotor position<br />
detection circuit<br />
Divide-by-8<br />
circuit<br />
Beat lock<br />
prevention circuit<br />
+<br />
-<br />
Soft switching<br />
drive circuit<br />
200<br />
Current limiter<br />
Output drive circuit<br />
High side saturation<br />
prevention control<br />
VCC<br />
RF<br />
UOUT<br />
VOUT<br />
WOUT<br />
PGN<br />
GND<br />
0.2<br />
VREG<br />
HP<br />
TOC<br />
VREG<br />
VCTL<br />
-<br />
+<br />
PWM PWM<br />
OSC<br />
VREF<br />
S/S<br />
PWM<br />
IN<br />
S/S PWMIN CSD F/R BR REVSEL IN1+ IN1- IN2+ IN2- IN3+ IN3- GND<br />
pulsec input<br />
SD<br />
OSC<br />
F/R<br />
BR<br />
LVSD<br />
LOGIC TSD<br />
REV<br />
SEL<br />
VCC<br />
1<br />
COMP<br />
HALL<br />
LOGIC<br />
HALL<br />
HYS AMP<br />
VCC3<br />
12VREG<br />
VREG<br />
PRI<br />
DRIVER<br />
CURR<br />
LIM<br />
12REG<br />
LVS<br />
VCC2<br />
VREG<br />
VCC1<br />
UL<br />
UH<br />
VL<br />
VH<br />
WL<br />
WH<br />
RF<br />
+<br />
12V<br />
Motor drivers<br />
Motor drive for the larger motors used in water heaters, air conditioner, and other appliances.<br />
Motor drive circuits with the desired output power (voltage and current) are implemented using<br />
external discrete transistors for the output stage.<br />
Functions and Features<br />
Three-phase bipolar drive<br />
Direct PWM drive<br />
Built-in braking function (short-circuit<br />
braking)<br />
Forward/reverse direction setting circuit<br />
Built-in protection circuits for reverse<br />
direction operation<br />
Full complement of built-in protection circuits,<br />
including current limiter circuit, undervoltage<br />
protection circuit, motor constraint protection<br />
circuit, and thermal protection circuit<br />
Motor operation can be controlled by either<br />
a command voltage or the duty of the input<br />
PWM signal.<br />
Thermal shutdown circuit<br />
Beat lock prevention circuit<br />
Package: MFP30SD<br />
V<br />
M<br />
+<br />
19
20<br />
LB11695M<br />
LB11690/H<br />
Three-phase direct PWM drive brushless motor driver Three-phase direct PWM drive brushless motor driver<br />
Applications Applications<br />
Motor drive for the larger motors used in water heaters, air conditioner, and other appliances.<br />
Motor drive circuits with the desired output power (voltage and current) are implemented using<br />
external discrete transistors for the output stage.<br />
Functions and Features Functions and Features<br />
Three-phase bipolar drive<br />
Direct PWM drive<br />
Forward/reverse direction setting circuit<br />
Built-in protection circuits for reverse<br />
direction operation<br />
Full complement of built-in protection circuits,<br />
including current limiter circuit, undervoltage<br />
protection circuit, motor constraint protection<br />
circuit, and thermal protection circuit<br />
VREG<br />
HP<br />
TOC<br />
VREG<br />
VCTL<br />
-<br />
+<br />
PWM PWM<br />
OSC<br />
VREF<br />
S/S<br />
PWM<br />
IN<br />
S/S PWMIN CSD F/R N1 N2 IN1+ IN1- IN2+ IN2- IN3+ IN3- GND<br />
pulsec input<br />
SD<br />
OSC<br />
F/R<br />
N1<br />
LVSD<br />
LOGIC<br />
N2<br />
VCC<br />
TSD<br />
MD<br />
LOGIC<br />
COMP<br />
HALL<br />
LOGIC<br />
HALL<br />
HYS AMP<br />
Motor operation can be controlled by either<br />
a command voltage or the duty of the input<br />
PWM signal.<br />
Thermal shutdown circuit<br />
Beat lock prevention circuit<br />
Package: MFP30SD<br />
V15<br />
12VREG<br />
VREG<br />
PRI<br />
DRIVER<br />
CURR<br />
LIM<br />
12REG<br />
LVS<br />
VREG<br />
VCC<br />
UL<br />
UH<br />
VL<br />
VH<br />
WL<br />
WH<br />
RF<br />
+<br />
12V<br />
V<br />
M<br />
+<br />
Motor drive for a wide range of larger motors, such as those used in electric bicycles, water<br />
heaters, and air conditioners. Motor drive circuits with the desired output power (voltage and<br />
current) are implemented using external discrete transistors for the output stage.<br />
Three-phase bipolar drive<br />
Direct PWM drive<br />
Built-in voltage step-up circuit that can<br />
drive an external n-channel MOSFET<br />
Supports input from a Hall sensor IC<br />
Current limiter reference voltage: 0.1 V<br />
typical (with sensing)<br />
Three-phase synthesized FG output<br />
V5<br />
TOC<br />
El-<br />
El+<br />
PWM<br />
-<br />
+<br />
PWM<br />
OSC<br />
+<br />
FV RC HP<br />
ONE-SHOT<br />
MULTI<br />
-<br />
+<br />
RES<br />
V5<br />
HP<br />
LVSD<br />
LOGIC<br />
CP1 CP2 V5<br />
CHARGE<br />
PUMP<br />
LOGIC<br />
HALL<br />
LOGIC<br />
HALL HYS COMP<br />
V5 RES GND V5orV12 IN1 IN2 IN3<br />
5VREG 12VREG<br />
PRI<br />
DRIVER<br />
V12<br />
VCC<br />
VB<br />
LVS<br />
CURR<br />
LIM RF<br />
RFGND<br />
UH<br />
UOUT<br />
UL<br />
VH<br />
VOUT<br />
VL<br />
WH<br />
WOUT<br />
WL<br />
Motor drivers<br />
F/V converted FG signal output (for speed<br />
control)<br />
Built-in integrating amplifier for use as an<br />
input buffer or speed control<br />
Package:<br />
LB11690: DIP30SD<br />
LB11690H: HSOP36<br />
36V<br />
+<br />
21
22<br />
LB1930M<br />
Low-saturation output H bridge forward/reverse motor driver that supports low-voltage drive<br />
Applications<br />
This device is a single-phase bipolar drive motor driver that can easily implement direct PWM drive for<br />
high motor drive efficiency. This device is optimal for driving all types of fan motors in applications from<br />
refrigerators to servers.<br />
Functions and Features<br />
Low-saturation output H bridge forward/reverse<br />
motor driver (one channel)<br />
Since the saturation voltage is low, the voltage<br />
applied to the motor is higher and the IC internal<br />
heat generation is minimized. This allows this<br />
device to be used in environments with higher<br />
operating ambient temperatures.<br />
Output saturation voltage: Vsat1 = 0.35 V typical<br />
(IO = 0.2 A)<br />
(High side + low side): Vsat2 = 0.55 V typical (IO = 0.5 A)<br />
Operating ambient temperature: Ta = -30 to +85°C<br />
This device is optimal for use in battery-operated<br />
equipment since the usage voltage range is wide<br />
(2.2 V to 10.8 V) and the current drain in standby<br />
mode is low (0.1 A).<br />
Through currents are held to a minimum by the<br />
internal logic by passing the system through<br />
standby mode when the input switches the mode<br />
CPU<br />
IN1<br />
IN2<br />
60k<br />
80k<br />
80k<br />
VCC<br />
60k <strong>Control</strong> block<br />
S-GND<br />
between forward or reverse and brake mode,<br />
between forward and reverse, or between other<br />
modes.<br />
There are no constraints on the relative<br />
magnitudes of the input and supply voltages. (For<br />
example, the device can be used with VCC = 3 V<br />
and VIN = 5 V.)<br />
The thermal protection circuit suppresses the<br />
drive current and protects the IC from thermal<br />
damage or destruction when an output shorted or<br />
other abnormal state occurs causes high currents<br />
to flow and the IC chip temperature reaches<br />
180°C or higher.<br />
Thermal shutdown circuit<br />
Large allowable power dissipation when<br />
mounted: Pd = 800 mW.<br />
Package: MFP14S<br />
P-GND<br />
C1=1µF<br />
OUT1<br />
OUT2<br />
M<br />
Motor drivers<br />
LB1948M<br />
Low-saturation output two-channel H bridge forward/reverse motor driver that supports low-voltage drive<br />
Applications<br />
This motor driver provides single-phase bipolar drive in all types of 12 V systems for either two DC motors or a<br />
single DC motor by connecting the two drive channels in parallel. This device is optimal for 1-2 phase<br />
excitation drive of two-phase bipolar stepping motors.<br />
Functions and Features<br />
Low-saturation output H bridge<br />
forward/reverse motor driver (two channels)<br />
Supports 12 V power supply systems<br />
Since the saturation voltage is low, the voltage<br />
applied to the motor is higher and the IC<br />
internal heat generation is minimized. This<br />
allows this device to be used in environments<br />
with higher operating ambient temperatures.<br />
Output saturation voltage: Vo(sat) = 0.50 V<br />
typical at IO = 400 mA<br />
Zero current drain standby mode<br />
Braking function<br />
Supports parallel connection: IOmax = 1.6 A,<br />
Vo(sat) = 0.6 V typical at IO = 800 mA<br />
Through currents are minimized by built-in<br />
IN1<br />
IN2<br />
IN3<br />
IN4<br />
60K<br />
60K<br />
60K<br />
60K<br />
80K<br />
80K<br />
80K<br />
80K<br />
<strong>Control</strong> block<br />
Thermal shutdown circuit<br />
spark killer diodes and control that passes<br />
through standby mode.<br />
Thermal shutdown circuit (that can be used, for<br />
example, at VCC = 3 V, VIN = 5 V)<br />
The thermal protection circuit suppresses the<br />
drive current and protects the IC from thermal<br />
damage or destruction when an output shorted<br />
or other abnormal state occurs causes high<br />
currents to flow and the IC chip temperature<br />
reaches 180°C or higher.<br />
Thermal shutdown circuit<br />
Large allowable power dissipation when<br />
mounted: Pd = 800 mW.<br />
Package: MFP10S<br />
VCC<br />
10µF<br />
OUT1<br />
OUT2<br />
OUT3<br />
OUT4<br />
GND<br />
M<br />
M<br />
23
24<br />
LB1644<br />
Forward/reverse 2-ch motor drivers<br />
Applications<br />
Provides two forward/reverse motor driver channels. Since the forward, reverse, and brake modes of<br />
each channel are controlled by two logic inputs, this device can directly drive two motors with drive<br />
voltages in the range 6 to 24 V. The voltage applied to the motors can be modified by using external<br />
constant-voltage diodes. Since the forward, reverse, and brake modes are controlled by two logic<br />
inputs, it can drive a wide range of 6 V, 9 V, and 12 V motors. This device is optimal for stepping motor<br />
drive and for drive of any two of the reel, loading, and cassette motors in a VCR.<br />
Functions and Features<br />
The motor driver power transistors are built<br />
in and can support dash currents up to 1 A.<br />
Braking function for stopping the motors<br />
Motor dash current absorption devices<br />
Input pins can be connected to MOS ICs<br />
directly.<br />
VCC1<br />
IN1<br />
1<br />
15<br />
4,5,12,13<br />
Fin<br />
OUT1 OUT2<br />
14 3<br />
Predriver<br />
TSD<br />
2 16 8 7<br />
IN2 VZ1 VZ2 IN3<br />
Very few external components required<br />
Wide operating voltage range<br />
Thermal shutdown circuit<br />
The output voltages can be changed by<br />
using external constant-voltage diodes.<br />
Package: DIP16F<br />
OUT3 OUT4<br />
6 11<br />
Input logic block Input logic block<br />
Predriver<br />
9<br />
10<br />
VCC2<br />
IN4<br />
LB1645N<br />
Forward/reverse 1-ch motor drivers<br />
Applications<br />
VCC1<br />
P2<br />
OUT2<br />
VCC2<br />
OUT1<br />
P1<br />
7<br />
9<br />
10<br />
8<br />
2<br />
3<br />
VZ<br />
IN2<br />
4 6<br />
Predriver<br />
Input<br />
logic<br />
block<br />
5<br />
1<br />
IN1 GND<br />
Motor drivers<br />
This product provides a single forward/reverse motor driver channel. Since the forward, reverse, and<br />
brake modes are controlled by two logic inputs, it can drive a wide range of 6 V, 9 V, and 12 V motors.<br />
The voltage applied to the motor can be modified by using an external constant-voltage diode.<br />
Functions and Features<br />
Forward, reverse, and brake modes are<br />
controlled by two logic inputs<br />
Built-in motor dash current absorption<br />
element<br />
Input pins can be connected to MOS ICs<br />
directly.<br />
The output voltage can be changed by<br />
using an external constant-voltage diode.<br />
Package: SIP10F<br />
25
26<br />
LB11862M<br />
Single-phase full-wave drive brushless motor driver<br />
Applications<br />
The miniature package makes this device optimal for smaller fans (particularly, CPU cooling<br />
fans). It also can provide highly efficient motor drive with minimal switching noise.<br />
Functions and Features<br />
Single-phase full-wave drive<br />
Supports both 5 V and 12 V power supplies<br />
The built-in regeneration circuit makes it<br />
possible to use a reverse connection<br />
prevention diode.<br />
Built-in Hall amplifier with hysteresis<br />
characteristics (supports cores without a<br />
commutator)<br />
CT<br />
0.47~1µF<br />
HALL<br />
VCC<br />
IN+<br />
IN-<br />
HB<br />
Discharge<br />
pulse<br />
Amplifier with hysteresis<br />
characteristics<br />
Thermal protection<br />
circuit<br />
<strong>Control</strong><br />
circuit<br />
Charge/discharge<br />
circuit<br />
Delay circuit<br />
Delay circuit<br />
START/STOP<br />
ST<br />
Motor constraint protection circuit (with<br />
automatic recovery)<br />
Motor constraint state output pin (latched<br />
output: low when turning, high when stopped)<br />
Low current drain standby mode using the<br />
Hall bias and start/stop pins<br />
Thermal shutdown circuit<br />
Package: MFP10S<br />
GND<br />
RD<br />
OUT2<br />
M<br />
OUT1<br />
LB11965M<br />
Single-phase full-wave direct PWM drive brushless motor driver<br />
Applications<br />
This device is a single-phase bipolar drive motor driver that can easily implement direct PWM<br />
drive for high motor drive efficiency. This device is optimal for driving all types of fan motors in<br />
applications from refrigerators to servers.<br />
Functions and Features<br />
Single-phase full-wave drive (with built-in<br />
18 V 1 A output transistor)<br />
Built-in external input control variable<br />
speed function (external excitation high<br />
side transistor direct PWM control)<br />
Supports both 12 V single-voltage power<br />
supply (recommended voltage range: VCC =<br />
VM = 9 to 17 V) and dual power supply system<br />
specifications (VCC = 5 V, VM = 8 to 17 V)<br />
Built-in 5 V regulator circuit (for the Hall<br />
sensor bias)<br />
0.47~1µF<br />
HALL<br />
CT<br />
VM<br />
VCC<br />
5VREG<br />
IN+<br />
IN-<br />
5VREG<br />
Discharge<br />
pulse<br />
Amplifier with hysteresis<br />
characteristics<br />
Thermal protection<br />
circuit<br />
<strong>Control</strong><br />
circuit<br />
Charge/discharge<br />
circuit<br />
Delay circuit<br />
Delay circuit<br />
Oscillator circuit<br />
S-GND VCONT<br />
CPWM<br />
P-GND<br />
Motor drivers<br />
Low current drain when stopped (when the<br />
VCONT pin is low)<br />
Motor constraint protection circuit (with<br />
automatic recovery)<br />
Motor constraint state output pin (latched<br />
output: low when turning, high when stopped)<br />
Built-in regeneration diode reduces the<br />
number of external components<br />
Thermal shutdown circuit<br />
Package: MFP14S<br />
FG<br />
OUT2<br />
M<br />
OUT1<br />
27
28<br />
LB1668M<br />
Two-phase unipolar drive brushless motor driver<br />
D<br />
IN+<br />
R1<br />
R2<br />
IN- H<br />
C1<br />
C<br />
0.47 10pF<br />
VIN Thermal shutdown<br />
circuit<br />
Amp<br />
Constantcurrent<br />
circuit<br />
<strong>Control</strong> block<br />
2<br />
OUT1<br />
OUT2<br />
QND<br />
L1 L2<br />
Z1<br />
Z2<br />
10<br />
Motor drivers<br />
RD/FG<br />
0.01pF<br />
LB1205<br />
General-purpose Darlington array<br />
Functions and Features<br />
Applications Input: low<br />
Motor drive in application where a wide operating voltage range, minimal external components, and<br />
the ability to implement motor lock protection and automatic recovery circuits are advantageous.<br />
Outpu : sink<br />
Vout (V): 65<br />
Iout (mA): 1500<br />
Functions and Features<br />
Pd/Ta (mW/˚C): 1900/25<br />
Circuits: 4<br />
Two-phase unipolar drive<br />
Hall sensors can be connected directly<br />
Package: DIP16F<br />
Output protection zener diodes allow<br />
Built-in 1.5 A output current transistors<br />
variable breakdown voltage specifications Rotation detection function that outputs a<br />
When the Z1 and Z2 pins are open: VOLM = 57 V low level in drive mode and a high level<br />
When the Z1 and Z2 pins are shorted: VOLM = 32 V when stopped<br />
An external zener diode can be connected Motor constraint protection circuit (with<br />
between the Z1 pin and VCC.<br />
automatic recovery)<br />
Can support either 12 V or 24 V power supply Thermal shutdown circuit<br />
applications by changing an external resistor. Package: MFP14S<br />
LB1233M<br />
Seven-circuit high-voltage Darlington driver array<br />
Functions and Features<br />
Input: high<br />
Outpu : sink<br />
Vout (V): 50<br />
Iout (mA): 500<br />
Pd/Ta (mW/˚C): 390/25<br />
Circuits: 7<br />
Package: MFP16<br />
2.7kΩ<br />
7.2kΩ<br />
1<br />
IN1<br />
13kΩ<br />
8kΩ<br />
3kΩ<br />
1.25kΩ<br />
20kΩ<br />
2kΩ<br />
IN1 IN2<br />
IN3 IN4<br />
OUT4 IN4 VDD GND GND IN3 OUT3 VCC<br />
16 15 14 13 12 11 10 9<br />
OUT1 OUT2<br />
16 15<br />
2<br />
IN2<br />
OUT1 OUT2<br />
1 2 3 4 5 6 7 8<br />
VCC OUT1 IN1 GND GND IN2 NC OUT2<br />
3<br />
IN3<br />
OUT3<br />
14<br />
4<br />
IN4<br />
OUT4<br />
13<br />
5<br />
IN5<br />
OUT3 OUT4<br />
(Note) V CC (Pin Nos. 1 and 9) are internally short-circuited.<br />
OUT5<br />
12<br />
6<br />
IN6<br />
OUT6<br />
11<br />
7<br />
IN7<br />
Driver arrays<br />
VCC<br />
VDD<br />
GND<br />
OUT7<br />
10<br />
VCC<br />
9<br />
8<br />
GND<br />
29
30<br />
LB1235<br />
General-purpose Darlington array<br />
Functions and Features<br />
Input: high<br />
Outpu : sink<br />
Vout (V): 65<br />
Iout (mA): 1500<br />
Pd/Ta (mW/˚C): 1900/25<br />
Circuits: 7<br />
Package: DIP16F<br />
LB1710<br />
Seven-circuit pnp input driver array<br />
Functions and Features<br />
Input: low<br />
Outpu : sink<br />
Vout (V): 50<br />
Iout (mA): 400<br />
Pd/Ta (mW/˚C): 1500/25<br />
Circuits: 7<br />
Package: DIP16<br />
340Ω<br />
20kΩ<br />
R2<br />
20kΩ<br />
R1<br />
8kΩ<br />
D1<br />
IN1<br />
2kΩ<br />
OUT1<br />
OUT4<br />
IN2<br />
NC IN4<br />
16 15 14<br />
1 2 3<br />
VCC OUT1 IN1<br />
OUT2<br />
IN3<br />
GND<br />
13 12<br />
OUT3<br />
IN4<br />
IN3 NC OUT3<br />
11 10 9<br />
4 5 6 7 8<br />
GND IN2 OUT2 VCC OUT4<br />
Top view<br />
VCC<br />
GND<br />
(Note) V CC (Pin Nos. 1 and 6) are internally short-circuited. Don't use NC pins.<br />
IN1<br />
TR1<br />
R3<br />
2.7kΩ<br />
R4<br />
7.2kΩ<br />
TR2<br />
R5<br />
3kΩ<br />
O1<br />
TR3<br />
R32<br />
R31<br />
D7<br />
IN7<br />
O1 O2 O3 O4 O5 O6 O7 VCC 16 15 14 13 12 11 10 9<br />
1 2 3 4 5 6 7 8<br />
IN1 IN2 IN3 IN4 IN5 IN6 IN7 GND<br />
TR19<br />
R33<br />
TR20<br />
R34 R35<br />
O7<br />
TR21<br />
VCC<br />
GND<br />
LB1731<br />
Four-circuit high-voltage/high-current Darlington driver array<br />
Functions and Features<br />
Input: low<br />
Outpu : sink<br />
Vout (V): 85<br />
Iout (mA): 1500<br />
Pd/Ta (mW/˚C): 1900/25<br />
Circuits: 4<br />
Package: DIP16F<br />
R2<br />
13kΩ<br />
R1<br />
8kΩ<br />
1.25kΩ<br />
R3 20kΩ<br />
IN1<br />
Tr1<br />
R4<br />
R5 2kΩ<br />
Tr2<br />
Tr3<br />
OUT1 OUT2<br />
IN2<br />
IN3 IN4<br />
OUT4 IN4 VDD GND GND IN3 OUT3 VCC<br />
16 15 14 13 12 11 10 9<br />
1 2 3 4 5 6 7 8<br />
VCC OUT1 IN1 GND GND IN2 NC OUT2<br />
OUT3 OUT4<br />
VCC<br />
VDD<br />
GND<br />
(Note) V CC (Pin Nos. 1 and 9) are internally short-circuited.<br />
Driver arrays<br />
31
32<br />
L88R05<br />
Low saturation voltage constant-voltage power supply with reset function<br />
Functions and Features<br />
Low saturation voltage regulator: 5 V/1 A<br />
Microcontroller reset signal generation<br />
function<br />
Full complement of protection functions<br />
Low minimum I/O voltage difference (0.5 V<br />
typical)<br />
C, D, and E rank versions with different reset<br />
threshold voltages available<br />
C: VRT = 4.5 V D: VRT = 4.2 V<br />
E: VRT = 3.9 V<br />
The delay time can be set with an external<br />
capacitor<br />
TO220-5H package adopted for easier<br />
mounting and thermal design.<br />
VIN 1<br />
GND 3<br />
L78LR05<br />
Constant-voltage power supply with reset function<br />
Functions and Features<br />
Regulator: 5 V/150 mA<br />
Microcontroller reset signal generation<br />
function (Ranked* by the reset threshold<br />
voltage, VRT)<br />
Battery backup function<br />
Large number of VRT ranks to support a<br />
wide range of microcontrollers<br />
The delay time can be set with an external<br />
capacitor<br />
No reverse current prevention diode<br />
required for battery backup<br />
Wide range of versions with different lead<br />
forms for flexibility in mounting.<br />
The power dissipation can be increased in<br />
the thermal design when double mounting is<br />
used<br />
Cd 2<br />
Cd<br />
0.1µF<br />
Startup<br />
circuit<br />
INPUT<br />
4<br />
+<br />
1µF<br />
6<br />
1.2V<br />
Reference<br />
voltage<br />
START<br />
UP<br />
+<br />
-<br />
Error<br />
amplifier<br />
Vref<br />
RESET<br />
Thermal<br />
protection circuit<br />
+<br />
-<br />
PROTE<br />
CTOR<br />
Error<br />
amp<br />
300Ω<br />
Vo<br />
detector<br />
Overcurrent<br />
control<br />
23.4µA<br />
0.8<br />
0.9<br />
0.8<br />
2.4V<br />
+<br />
-<br />
10kΩ<br />
TO220-5H<br />
10.4max<br />
10.0<br />
0.45<br />
1.7 1.71.7 1.7<br />
6.5<br />
5.0<br />
300Ω<br />
2.7<br />
3.6<br />
15.0<br />
8.8<br />
TP5H<br />
1.5<br />
(5.5)<br />
7.0<br />
0.6<br />
7.5<br />
1 5<br />
(0.65) 1.3 0.5<br />
1<br />
8<br />
4.5<br />
1.3<br />
2.7<br />
4.5<br />
8.4<br />
0.5<br />
17.8<br />
21.3<br />
23.0<br />
5 VOUT 4 RES<br />
2.3<br />
+ OUTPUT<br />
10µF<br />
RESET<br />
Output<br />
7V<br />
7 GND<br />
0.5<br />
1.2<br />
Under development<br />
LA5761/62/63<br />
General-purpose Darlington array<br />
Functions and Features<br />
LA5761: 3V/2A, LA5762: 5V/2A,<br />
LA5763: 12V/2A<br />
Input voltage (VIN): maximum = 45 V<br />
High efficiency<br />
Only 4 external components required<br />
Built-in reference oscillator (60 Hz)<br />
Current limiter circuit<br />
Thermal shutdown circuit<br />
Soft start circuit<br />
Under development<br />
VIN1<br />
Peg.<br />
OSC Reset<br />
Comp.<br />
5SS 3GND<br />
LA5751/52/53<br />
External excitation step-down switching regulators<br />
Functions and Features<br />
LA5751: 3.3V/3A, LA5752: 5V/3A<br />
LA5753: 12V/3A<br />
Input voltage (VIN): maximum = 45 V<br />
High efficiency<br />
Only 4 external components required<br />
Built-in reference oscillator (60 Hz)<br />
Current limiter circuit<br />
Thermal shutdown circuit<br />
Soft start circuit<br />
VIN1<br />
Peg.<br />
5SS 3GND<br />
Amp.<br />
Comp.<br />
Amp.<br />
VREF<br />
OSC Reset<br />
VREF<br />
OCP<br />
OCP<br />
Drive<br />
TDS<br />
Drive<br />
TDS<br />
0.8<br />
0.9<br />
0.8<br />
Power supply ICs<br />
TO220-5H<br />
10.4max<br />
10.0<br />
2.7<br />
3.6<br />
0.45<br />
1.7 1.71.7 1.7<br />
0.8<br />
0.9<br />
0.8<br />
15.0<br />
8.8<br />
2SWOUT<br />
4VCS<br />
4.5<br />
1.3<br />
2.7<br />
4.5<br />
8.4<br />
TO220-5H<br />
10.4max<br />
10.0<br />
2.7<br />
3.6<br />
0.45<br />
1.7 1.71.7 1.7<br />
15.0<br />
8.8<br />
2SWOUT<br />
4VCS<br />
17.8<br />
21.3<br />
23.0<br />
4.5<br />
1.3<br />
2.7<br />
4.5<br />
8.4<br />
17.8<br />
21.3<br />
23.0<br />
33
34<br />
Microcontrollers<br />
Lineup<br />
8 bit microcontrollers<br />
Type No.<br />
ROM<br />
[bits]<br />
RAM<br />
[bits]<br />
Operating<br />
supply voltage<br />
range VDD [V]<br />
Minimum<br />
cycle time [µs]<br />
Ports<br />
Withstand Maximum Number Interrupts<br />
voltage [V] current [mA] of pins Internal External<br />
Functions<br />
Serial I/O<br />
Maximum<br />
number of timers<br />
A/D<br />
converter<br />
LC875747B<br />
48K×8<br />
LC875755B<br />
LC875763B<br />
LC875772A<br />
LC875780A<br />
LC87F57C8A<br />
56K×8<br />
64K×8<br />
72K×8<br />
80K×8<br />
128K×8<br />
(Flash)<br />
2048×9<br />
3072×9<br />
2.5~6.0<br />
2.5~5.5<br />
0.3<br />
(10 MHz)<br />
Bus cycle<br />
= 0.1µs<br />
VDD 30 55 14 6<br />
Synchronous: One 8-bit<br />
channel with automatic<br />
transfer support<br />
Asynchronous/synchronous:<br />
One 8-bit channel<br />
with bus support<br />
Eight 8-bit<br />
timers<br />
8 bits × 12<br />
LC875J48C<br />
LC875J56C<br />
LC875J64C<br />
LC87F5JC8A<br />
48K×8<br />
56K×8<br />
64K×8<br />
128K×8<br />
(Flash)<br />
2048×9<br />
4096×9<br />
2.5~5.5<br />
0.25<br />
(12 MHz)<br />
Bus cycle<br />
= 0.083µs<br />
VDD<br />
Under<br />
evaluation<br />
55 14 7<br />
Synchronous: Two 8-bit<br />
channel with automatic<br />
transfer support<br />
Asynchronous/synchronous:<br />
Two 8-bit channel<br />
One clock time<br />
base timer<br />
8 bits × 11<br />
LC875D48C<br />
48K×8<br />
LC875D56C<br />
LC875D64C<br />
LC875D72B<br />
LC875D80B<br />
LC875D96B<br />
56K×8<br />
64K×8<br />
72K×8<br />
80K×8<br />
96K×8<br />
2048×9<br />
4096×9<br />
2.5~5.5<br />
0.25<br />
(12 MHz)<br />
Bus cycle<br />
= 0.083µs<br />
VDD<br />
Under<br />
evaluation<br />
71 14 8<br />
Synchronous: Two 8-bit<br />
channel with automatic<br />
transfer support<br />
Asynchronous/synchronous:<br />
Three 8-bit channel<br />
Eight 8-bit<br />
timers<br />
One clock time<br />
base timer<br />
8 bits × 15<br />
LC87F5DC8A<br />
128K×8<br />
(Flash)<br />
LC875G08A<br />
8K×8<br />
LC875G16A<br />
LC875G24A<br />
LC875G32A<br />
LC87F5G32A<br />
16K×8<br />
24K×8<br />
32K×8<br />
32K×8<br />
(Flash)<br />
1024×9<br />
1024×9<br />
2.3~6.0<br />
2.5~5.5<br />
0.3<br />
(10 MHz)<br />
Bus cycle<br />
= 0.1µs<br />
VDD<br />
Under<br />
evaluation<br />
39 14 7<br />
Synchronous: One 8-bit<br />
channel with automatic<br />
transfer support<br />
Asynchronous/synchronous:<br />
One 8-bit channel<br />
with bus support<br />
Eight 8-bit<br />
timers<br />
One clock time<br />
base timer<br />
8 bits × 12<br />
LC875BH4A<br />
LC875BJ0A<br />
LC875BM2A<br />
LC875BP4A<br />
LC87F5BP6A<br />
LC875C48C<br />
LC875C56C<br />
LC875C64C<br />
LC875C72B<br />
LC875C80B<br />
LC875C96B<br />
LC87F5CC8A<br />
176K×8<br />
192K×8<br />
224K×8<br />
256K×8<br />
256K×8<br />
(Flash)<br />
48K×8<br />
56K×8<br />
64K×8<br />
72K×8<br />
80K×8<br />
96K×8<br />
128K×8<br />
(Flash)<br />
4096×9<br />
6144×9<br />
2048×9<br />
4096×9<br />
2.5~6.0<br />
2.5~5.5<br />
0.3<br />
(10 MHz)<br />
Bus cycle<br />
= 0.1µs<br />
0.25<br />
(12 MHz)<br />
Bus cycle<br />
= 0.083µs<br />
Delivery<br />
format<br />
QFP64<br />
SQFP64<br />
DIP64<br />
QFP64<br />
TQFP64<br />
QFP80<br />
TQFP80<br />
QFP48<br />
SQFP48<br />
Synchronous: Three 8-bit<br />
channel with automatic Eight 8-bit<br />
QFP100<br />
Under<br />
transfer support<br />
timers<br />
VDD 89 19 7 8 bits × 12 SQFP100<br />
evaluation<br />
Asynchronous/synchronous: One clock time<br />
Two 8-bit channel base timer<br />
TQFP100<br />
with bus support<br />
Synchronous: Two 8-bit<br />
Under<br />
channel with automatic<br />
Eight 8-bit<br />
VDD 89 14 8 transfer support<br />
timers<br />
8 bits × 15<br />
evaluation<br />
Asynchronous/synchronous: One clock time<br />
Three 8-bit channel base timer<br />
QFP100<br />
TQFP100<br />
: New product : Under development<br />
Features<br />
· 8-bit synchronous SIO circuit with 32-byte automatic transfer function<br />
· 8-bit asynchronous/synchronous serial I/O<br />
· Two 12-bit PWM channels<br />
· Multiplier/divider circuit: 24 × 16, 24 / 16, 16 × 8, 16 / 8<br />
· On-chip UART<br />
· Remote controller reception circuit On-chip flash EEPROM version<br />
(Supports onboard reprogramming)<br />
· 8-bit synchronous SIO circuit with 32-byte automatic transfer function<br />
· 8-bit asynchronous/synchronous serial I/O · Two 12-bit PWM channels<br />
· Multiplier/divider circuit: 24 × 16, 24 / 16, 16 × 8, 16 / 8<br />
· Remote controller<br />
reception circuit<br />
· 8-bit synchronous SIO circuit with 32-byte automatic transfer function<br />
· 8-bit asynchronous/synchronous serial I/O<br />
· Two 12-bit PWM channels<br />
· Multiplier/divider circuit: 24 × 16, 24 / 16, 16 × 8, 16 / 8<br />
· Remote controller reception circuit<br />
· High-speed clock counter<br />
· System clock<br />
divider circuit<br />
· 8-bit synchronous SIO circuit with 32-byte automatic transfer function<br />
· 8-bit asynchronous/synchronous serial I/O<br />
· Two 12-bit PWM channels<br />
· Multiplier/divider circuit: 24 × 16, 24 / 16, 16 × 8, 16 / 8<br />
· Remote controller reception circuit<br />
· High-speed clock counter<br />
· System clock divider circuit<br />
· 8-bit synchronous SIO circuit with 32-byte automatic transfer function<br />
· 8-bit asynchronous/synchronous serial I/O · Two 12-bit PWM channels<br />
· Multiplier/divider circuit: 24 × 16, 24 / 16, 16 × 8, 16 / 8<br />
· Remote controller reception circuit<br />
· High-speed clock counter<br />
· System clock divider circuit<br />
· 8-bit synchronous SIO circuit with 32-byte automatic transfer function<br />
· 8-bit asynchronous/synchronous serial I/O<br />
· Two 12-bit PWM channels<br />
· Multiplier/divider circuit: 24 × 16, 24 / 16, 16 × 8, 16 / 8<br />
· Remote controller reception circuit<br />
· High-speed clock counter<br />
· System clock<br />
divider circuit<br />
Microcontrollers<br />
On-chip flash EEPROM version (Supports onboard<br />
reprogramming, and on-chip debugging)<br />
On-chip flash EEPROM version (Supports onboard<br />
reprogramming, and on-chip debugging)<br />
On-chip flash EEPROM version<br />
(Supports onboard reprogramming,<br />
and on-chip debugging)<br />
On-chip flash EEPROM version<br />
(Supports onboard reprogramming,<br />
and on-chip debugging)<br />
On-chip flash EEPROM version (Supports onboard<br />
reprogramming, and on-chip debugging)<br />
Each microcontroller has its own catalog, user's manual, and other materials. However, although we are working on providing English versions of all the<br />
documentation, some manuals are still available in Japanese only. Contact your SANYO sales office for the latest information on manual availability.<br />
ARM7TDMI is the registered trademark of ARM Limited.<br />
Flash memory products are licensed from Silicon Storage Technology, Inc. (USA), and manufactured and sold by SANYO Electric Co., Ltd.<br />
Notes on Package Types and Naming<br />
The package names used in this documentation are designed to indicate rough<br />
classification of the packages used, and do not necessarily indicate the formal name of<br />
each individual package. Refer to the delivery specifications document for the particular<br />
product for the package dimensions figure and the formal name of the package.<br />
35
36<br />
Eight-Bit Microcont rollers<br />
Easy-to-use High Functionality Development<br />
Support System SANYO's On-Chip Debugger<br />
Compared to the EVA-62S, the<br />
operating screens are completely<br />
natural to use.<br />
1. Paperless debugging<br />
Up to 32 windows can be displayed at the<br />
same time.<br />
2. High-level language<br />
debugging<br />
Supports the C programming language.<br />
3. High-speed real-time debugging<br />
Real-time display RAM mapping function<br />
Real-time recoding/display trace function<br />
Real-time timing waveform display for pins and other signals<br />
Timing Chart Real-Time Display<br />
EVA-62S LC87'S delopment tool<br />
Debugging functions<br />
Compared to the EVA-62S, the operating screens are<br />
completely natural to use.<br />
1. Paperless debugging<br />
Flash microcontroller<br />
Easy-to-use Development Support System<br />
Up to 32 windows can be displayed at the same time.<br />
2. High-level language debugging<br />
Supports the C programming language (source-level<br />
debugging).<br />
•The following differences with the EVA-62S have been eliminated.<br />
3. High-speed real-time debugging<br />
Windowed<br />
screen display<br />
Real-time display RAM mapping function<br />
Real-time recoding/display trace function<br />
Real-time timing waveform display for pins and other signals<br />
5 control lines<br />
Interface board<br />
Microcontrollers<br />
USB<br />
interface<br />
37
38<br />
Hybrid ICs<br />
STK621-XXX and S TK625-XXX Series<br />
Miniature transfer molded hybrid ICs and 3-phase motor driver inverter power ICs<br />
Applications<br />
These devices combine 3-phase inverter power output stage, predriver circuit, bootstrap circuit,<br />
and protection circuits in a single package.<br />
SANYO has developed three types of pin-compatible miniature transfer molded packages (SIP1,<br />
SIP2, and SIP3) for both 3-phase shunt and single-phase shunt current control types separately<br />
with 6 to 20 A output ratings.<br />
These products can contribute to miniaturization, reduced parts counts, and improved reliability<br />
in air conditioners, washing machines, refrigerators, and other home appliances.<br />
Functions and Features<br />
Built-in bootstrap diode<br />
Built-in thermistor supports temperature monitoring<br />
Predriver supply voltage undervoltage protection circuit<br />
Short-circuit protection circuit protects against shorts when<br />
the high and low side input phases are both on.<br />
Overcurrent protection circuit (STK621-XXX series)<br />
Built-in current detection resistor (STK621-XXX series)<br />
Insulation breakdown voltage: 2 kV rms guaranteed<br />
(50 Hz, 1 minute)<br />
Miniature transfer molded package<br />
Transfer Molded Package Inverter Power IC Lineup<br />
<strong>Control</strong> type Catalog No.<br />
Three-phase<br />
current detection<br />
type<br />
Single-phase<br />
current detection<br />
type (Bus line)<br />
STK625-028<br />
STK625-027<br />
STK625-035<br />
STK621-120<br />
STK621-140<br />
STK621-150<br />
STK621-031<br />
STK621-041<br />
Under<br />
development<br />
Under<br />
development<br />
Under<br />
development<br />
Under<br />
development<br />
VCES(V)<br />
600<br />
Output<br />
current<br />
(A)<br />
6<br />
10<br />
16<br />
6<br />
10<br />
15<br />
15<br />
20<br />
Carrier fc<br />
(kHz)<br />
20<br />
10<br />
10<br />
SIP1<br />
SIP2<br />
SIP3<br />
Protection circuits<br />
UVSD<br />
Note) UVSD: <strong>Control</strong> power supply undervoltage protection. Isd: Overcurrent protection circuit.<br />
Tsd: Thermal shutdown circuit. : No protection circuit, but temperature monitoring supported.<br />
The inverter power ICs listed in this catalog are products of IR-SA Integrated Technologies Corporation.<br />
IR-SA Integrated Technologies Corporation is a joint venture between SANYO Electric Co., Ltd. and International Rectifier<br />
Corporation (USA).<br />
http://www.semic.sanyo.co.jp/news/release/2003/030717sanyo.htm<br />
Isd Tsd<br />
Package<br />
SIP1<br />
SIP1<br />
SIP2<br />
SIP1<br />
SIP1<br />
SIP2<br />
SIP3<br />
SIP3<br />
STK625-0XX Series<br />
VB3 1<br />
W 2<br />
VB2 4<br />
V 5<br />
VB1 7<br />
U 8<br />
+<br />
10<br />
VRU 12<br />
VRV 13<br />
VRW 14<br />
HIN1 15<br />
HIN2 16<br />
HIN3 17<br />
LIN1 18<br />
LIN2 19<br />
LIN3 20<br />
ITRIP 21<br />
VDD 22<br />
VSS 23<br />
Thermistor<br />
Vref<br />
Level<br />
Shifter<br />
U.V.<br />
Level<br />
Shifter<br />
U.V. U.V.<br />
Level<br />
Shifter<br />
Logic Logic Logic<br />
Shut down<br />
VDD-Under Voltage<br />
Latch time about 9ms<br />
(Automatic Reset)<br />
STK621-1XX Series<br />
VB1<br />
U<br />
VB2<br />
V<br />
VB3<br />
W<br />
+<br />
--<br />
7<br />
8<br />
4<br />
5<br />
1<br />
2<br />
10<br />
12<br />
VTH 13<br />
HIN1 15<br />
HIN2 16<br />
HIN3 17<br />
LIN1 18<br />
LIN2 19<br />
LIN3 20<br />
FAULT 21<br />
Iso 22<br />
VDD 14<br />
VSS 23<br />
VB1 1<br />
U 2<br />
VB2<br />
V<br />
VB3 7<br />
W 8<br />
+<br />
-<br />
4<br />
5<br />
10<br />
12<br />
HIN1 13<br />
HIN2 14<br />
HIN3 15<br />
LIN1 16<br />
LIN2 17<br />
LIN3 18<br />
FAULT 19<br />
ISO 20<br />
VDD 21<br />
VSS 22<br />
CB<br />
CB<br />
CB<br />
CB<br />
Shunt Resistor<br />
Thermistor<br />
STK621-031/-041<br />
Shunt-R<br />
Level<br />
Shifter<br />
Level<br />
Shifter<br />
Logic<br />
U.V. U.V. U.V.<br />
U.V.<br />
Shut down<br />
Over-Current<br />
Level<br />
Shifter<br />
VDD-Under Voltage<br />
Level<br />
Shifter<br />
Level<br />
Shifter<br />
Logic Logic<br />
Latch time About 9ms<br />
(Automatic Reset)<br />
U.V. U.V.<br />
Level<br />
Shifter<br />
Logic Logic Logic<br />
(Protection)<br />
Æ Over-Temp.<br />
Æ Over-Current<br />
Æ VDD-Under Voltage<br />
Æ Latch<br />
Inverter power ICs<br />
Reset (All Input = High/OFF)<br />
39
40<br />
STK760-220<br />
Miniature transfer molded hybrid IC and improved power factor active filter IC<br />
Applications<br />
This device is a chopper type active filter that integrates a power device (IGBT, FRD), a PFC<br />
control IC, and a regulator for the control IC in a single package. It is optimal for handling highfrequency<br />
current in home appliances that include an inverter and general-purpose inverter and<br />
switching power supplies.<br />
Functions and Features<br />
Single-phase AC input chopper type active filter<br />
SIP3<br />
Adopts an IGBT (NPT) in the active filter output stage<br />
Supports a wide range of input voltages (up to 50 V) by includes a<br />
regulator for the PFC control IC.<br />
Full complement of protection circuits, including overcurrent,<br />
overvoltage, and undervoltage protection circuits, plus a soft start<br />
function.<br />
PFC control can be turned on/off with a logic level signal.<br />
Light load correction circuit prevents increases in the output voltage in the no-load state.<br />
Lead forming allows the device to be mounted either horizontally or vertically.<br />
Insulation breakdown voltage: 2 kV rms guaranteed (50 Hz, 1 minute)<br />
SIP (single inline) transfer molded package<br />
Lineup<br />
Catalog No.<br />
Input supply<br />
voltage<br />
(V)<br />
Rated input<br />
current<br />
(Arms)<br />
STK760-220 170-264V 20<br />
Operating<br />
fc (kHz)<br />
25<br />
Protection circuits<br />
UVSD UVSD Isd<br />
The inverter power ICs listed in this catalog are products of IR-SA Integrated Technologies Corporation.<br />
IR-SA Integrated Technologies Corporation is a joint venture between SANYO Electric Co., Ltd. and International Rectifier<br />
Corporation (USA).<br />
http://www.semic.sanyo.co.jp/news/release/2003/030717sanyo.htm<br />
Package<br />
SIP3<br />
Status<br />
ES<br />
VS<br />
VREF<br />
ONF<br />
CT<br />
SS<br />
GND<br />
1<br />
6<br />
4<br />
8<br />
7<br />
3<br />
VCC constant voltage<br />
power supply<br />
VREF reference<br />
voltage<br />
SUB<br />
Oscillator<br />
Soft Start<br />
2<br />
ON/OFF Vcc UVLO TR2, 3<br />
PWM<br />
VCC<br />
V CC<br />
Current amplifier<br />
Phase correction<br />
10 11<br />
IFB<br />
IEI<br />
R<br />
S Q<br />
S<br />
Multiplier<br />
5<br />
VDET<br />
V CC<br />
Overvoltage detector<br />
Overcurrent detector<br />
Voltage error amplifier<br />
D2<br />
Active Power ICs<br />
D3<br />
22 K<br />
19 A<br />
18 C<br />
15 E<br />
13 OVP<br />
9 IS<br />
12<br />
VEI<br />
41
Discrete <strong>Devices</strong><br />
Power Device Serie s<br />
Power Transistors<br />
Bipolar transistors that feature high breakdown voltages, high switching speeds, and high<br />
reliability due to fabrication in SANYO's MBIT process.<br />
Power Bipolar Transistors<br />
Type No.<br />
2SC5956<br />
2SC5957<br />
2SC5958<br />
2SC5959<br />
2SC5961<br />
2SC5962<br />
2SC5963<br />
Package<br />
TO-220<br />
TO-220ML<br />
TO-3PB<br />
TO-3PMLH<br />
VCB0 (V)<br />
VCE0 (V)<br />
IC (A)<br />
PC (W)<br />
hFE VCE IC (V) (A)<br />
min<br />
to<br />
max<br />
VCE (sat)<br />
IC IB (A) (A)<br />
7 40<br />
0.8<br />
4 0.8<br />
10 50<br />
1.2<br />
6 1.2<br />
500 400<br />
4<br />
7<br />
25<br />
5<br />
0.5<br />
0.8 20 to 50<br />
3<br />
4<br />
0.6<br />
0.8<br />
10 80<br />
1.2<br />
6 1.2<br />
14 90<br />
2.0<br />
10 2.0<br />
10 50<br />
1.2<br />
6 1.2<br />
Power Schottky Barrier Diodes<br />
Schottky barrier diodes with low reverse current due to the adoption of a high-reliability<br />
planar structure. These devices also feature low switching noise.<br />
Power Schottky Barrier Diodes<br />
Type No.<br />
SBT250-04Y<br />
SBT80-06J<br />
SBT350-06L<br />
SBT150-10Y<br />
SBT350-10R<br />
Package<br />
SMP<br />
TO-220ML<br />
TO-3PB<br />
SMB<br />
TO-3PML<br />
VPRM (V)<br />
40<br />
60<br />
100<br />
Power MOSFETs<br />
IO<br />
(A)<br />
25<br />
8<br />
35<br />
15<br />
35<br />
I FSM<br />
(A)<br />
120<br />
80<br />
200<br />
80<br />
160<br />
Low on-resistance, ultrahigh switching speed, and low Qg.<br />
Low On Resistance PowerMOSFET<br />
Type No. Package VDSS (V) VGSS (V) ID (A)<br />
PD(W)<br />
TC=25°C<br />
RDS (on)(Ω)typ/max<br />
VGS =10V VGS =4V<br />
Ciss(typ)<br />
(pF)<br />
Polarity<br />
2SJ653 TO-220ML 60 ±20 37 35 19/25 26/37 6500 Pch<br />
2SK3818 SMP<br />
60 ±20 74 75 10/13 13/18 5500 Nch<br />
2SJ657 TO-220ML 100 ±20 25 30 39/52 49/69 6350 Pch<br />
2SK3822 SMP<br />
100 ±20 52 75 20/26 24/34 6250 Nch<br />
2SJ571 ZP<br />
400 ±30 5 50 1.5/2(Ω) –<br />
1500 Pch<br />
2SJ522 SMP<br />
450 ±30 5 70 1.5/2(Ω) –<br />
1500 Pch<br />
2SK2619 SMP<br />
500 ±30 6 70 *0.95/1.25 –<br />
700 Nch<br />
2SK2628LS TO-220FI 600 ±30 6 35 *0.9/1.2(Ω) –<br />
1050 Nch<br />
2SK2919 ZP<br />
600 ±30 2 35 *3.2/4.3(Ω)<br />
*VGS=15<br />
–<br />
400 Nch<br />
I F<br />
(A)<br />
10<br />
3<br />
15<br />
6<br />
14<br />
VF max<br />
(V)<br />
0.55<br />
0.58<br />
0.80<br />
V R<br />
(V)<br />
20<br />
30<br />
50<br />
max<br />
(V)<br />
0.8<br />
I R<br />
max<br />
(mA)<br />
0.3<br />
0.1<br />
0.5<br />
0.2<br />
0.5<br />
f T<br />
typ<br />
(MHz)<br />
15<br />
20<br />
15<br />
Rthj-c<br />
(°C/W)<br />
1.7<br />
5<br />
1.2<br />
3<br />
2<br />
ExPD: Excellent Power Device<br />
RCC Method Power Supply Switching Regulator IC<br />
Built-in delayed RCC control circuit IC<br />
Overcurrent protection function<br />
Miniature package (TO-220F15H)<br />
Delay-RCC Type ExPD<br />
Type No.<br />
TN4R01<br />
TN4R02<br />
TN4R03<br />
TN4R04<br />
TN6R04<br />
TN8R01<br />
TN8R02<br />
TN8R03<br />
TN8R04<br />
VIN<br />
(AC)<br />
Package<br />
Half-Bridge Driver<br />
TO-220FI5H<br />
VDSS (V)<br />
450<br />
450<br />
450<br />
450<br />
650<br />
800<br />
800<br />
800<br />
800<br />
Power MOSFET<br />
ID (A) RDS (on)(Ω)<br />
4.5<br />
6<br />
3<br />
6.5<br />
5.5<br />
2.5<br />
3<br />
4.5<br />
3.5<br />
Type No. Withstand voltage VHFG (V)<br />
TND505MD<br />
TND506MD<br />
Start-up Resistor<br />
Pin Definitions<br />
1 : FB<br />
2 : DELAY<br />
3 : DRAIN<br />
4 : VIN<br />
5 : SOURCE<br />
(GND)<br />
+<br />
TN4R / TN6R /TN8R Series<br />
5<br />
4<br />
3<br />
2<br />
1<br />
Resonant<br />
Capacitor<br />
Timing Capacitor<br />
Snubber<br />
Circuit<br />
Drive<br />
Circuit<br />
Input<br />
Compensation Resistor<br />
Feedback <strong>Control</strong> Capacitor<br />
1.25/1.6<br />
0.95/1.3<br />
1.95/2.5<br />
0.8/1.04<br />
1.2/1.6<br />
3.9/5.2<br />
3.1/3.9<br />
1.75/2.3<br />
2.45/3.2<br />
Error Detection<br />
Imput Voltage<br />
(VAC)<br />
100/120<br />
100/120<br />
100/120<br />
100/120<br />
220<br />
WIDE<br />
220<br />
WIDE<br />
220<br />
WIDE<br />
220<br />
WIDE<br />
220<br />
WIDE<br />
VOUT<br />
GND<br />
Max Power<br />
(W)<br />
90<br />
120<br />
60<br />
130<br />
180<br />
90<br />
100<br />
50<br />
120<br />
60<br />
160<br />
80<br />
140<br />
70<br />
Drive capacity Source / Sink (mA)<br />
600 220/450<br />
+<br />
Power <strong>Devices</strong><br />
SANYO's ExPD products achieve both high reliability and high performance at the same<br />
time. The high-precision overcurrent protection function that these devices feature<br />
allows them to be used in a wide variety of applications as switching devices for solenoid<br />
and motor drivers in OA and FA equipment and entertainment (game) products.<br />
Half-Bridge Driver<br />
High breakdown voltage MOSFET with<br />
current detection function<br />
Excessive input voltage protection function<br />
42<br />
43
Change language