FUNDAMENTALS OF METAL CASTING

More documents

Recommendations

Info

Figure 10.2 - Two forms of mold: (a) open mold, simply a container in the shape of the desired part; and (b) closed mold, in which the mold geometry is more complex and requires a gating system (passageway) leading into the cavity ©2002 John Wiley & Sons, Inc. M. P. Groover, “Fundamentals of Modern Manufacturing 2/e”
Two Categories of Casting Process 1. Expendable mold processes –uses an expendable mold which must be destroyed to remove casting Mold materials: sand, plaster, and similar materials, plus binders 2. Permanent mold processes –uses a permanent mold which can be used many times to produce many castings Made of metal (or, less commonly, a ceramic refractory material ©2002 John Wiley & Sons, Inc. M. P. Groover, “Fundamentals of Modern Manufacturing 2/e”
Page 1 and 2: FUNDAMENTALS OF METAL CASTING •Ov
Page 3 and 4: Figure 10.1 - Classification of sol
Page 5 and 6: Capabilities and Advantages of Cast
Page 7 and 8: Parts Made by Casting •Big parts:
Page 9: The Mold in Casting •Contains cav
Page 13 and 14: Figure 10.2 (b) Sand casting mold
Page 15 and 16: Forming the Mold Cavity •Mold cav
Page 17 and 18: Gating System Channel through which
Page 19 and 20: Heating the Metal • Heating furna
Page 21 and 22: Solidification of Metals Transforma
Page 23 and 24: Solidification of Pure Metals •Du
Page 25 and 26: Most alloys freeze over a temperatu
Page 27 and 28: •Solidification takes time Solidi
Page 29 and 30: Mold Constant in Chvorinov's Rule
Page 31 and 32: Figure 10.8 - Shrinkage of a cylind
Page 33 and 34: Solidification Shrinkage •Occurs
Page 35 and 36: Directional Solidification •To mi
Page 37 and 38: Figure 10.9 - (a) External chill to

FUNDAMENTALS OF METAL CASTING

Create successful ePaper yourself

Delete template?

Save as template?