Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Project</strong> <strong>Solutions</strong><br />
No matter whether you want to use the Designer Linear Grille<br />
or the Designer Roll-Up Grille – there is always an aesthetic solution.<br />
The figures show a selection of solution variants with<br />
Designer Roll-Up Grille.<br />
Individual mitre corner<br />
arcs<br />
Mitre corner 90°<br />
Final mitre corner Round section with adapted roll grille<br />
Section with adapted roll grille Adaptation with panel<br />
Designer Grille
1. Mitred Joints<br />
2. Bevels<br />
3. Recesses<br />
4. arcs<br />
Designer Grille<br />
With mitre, acute/obtuse angle or 90° angle<br />
Connection of trench heater with flexible hoses<br />
All designs can be realised with roll grille as well as with linear grille<br />
In any shape for the integration of building parts as e. g. columns, piers, etc.<br />
Different materials are possible for coverings:<br />
– Aluminium, anodised<br />
– Stainless steel finish<br />
Arcs are possible with the Designer Roll-Up Grille DR 15<br />
Radii over 2900 mm<br />
Radian measure of a maximum of 3000 mm
<strong>Project</strong> <strong>Solutions</strong><br />
Mitre Joints<br />
Exemplary calculation:<br />
KB<br />
arcs<br />
Exemplary calculation:<br />
KB<br />
KB<br />
KL 1 (mm)<br />
GP.RP<br />
Mitre Jointss, angles and production lengths are manufactured according to your specifications in mm.<br />
– GPLRP: Mitre Joints, L frame profile<br />
– GPZRP: Mitre Joints, Z frame profile<br />
GP DR | GP DL<br />
Mitre Joints for the Designer Roll-Up Grille and the Designer Linear Grille in matching colours. Delivery as<br />
profiled plate, offering a beautiful solution with full step-on ability. The profile plate covers the entire mitre<br />
section of two convectors or system troughs, respectively.<br />
DR 15.RB<br />
KL 2 (mm)<br />
- Radii over 2900 mm<br />
- Radian measure of a maximum of 3000 mm<br />
Ordering information:<br />
Trench heater lenght (KL)<br />
Trench heater width (KB)<br />
Mitre angle (W)<br />
Order example for Mitre Joints:<br />
1 unit DR 15 RL = 1375 mm<br />
1 unit DR 15 RL = 2845 mm<br />
1 unit GP DR W1.2 = 135°<br />
The Designer Roll-Up Grille in arcs design fits exactly to the arcs for the System Convector.<br />
All anodised shades and RAL colours, as well as decors, are available.<br />
Ordering information:<br />
Trench heater lenght (KL)<br />
Trench heater width (KB)<br />
2 options to define the arcs:<br />
1st option: Radius r in mm and radian measure BM in mm<br />
or<br />
2nd option: Radius r in mm and the angle α in °.<br />
Order example for arcs:<br />
1 unit DR 15.RB r=3500 mm, BM=2750 mm<br />
Designer Grille
4. System Extensions<br />
CombiCut<br />
Roll-Up Grille Guard<br />
System trough<br />
Designer Grille<br />
CombiCut<br />
variable<br />
500mm to 5000 mm<br />
CombiCut<br />
Special tool "CombiCut" for the individual cutting to length of the Designer Grille<br />
Roll-Up Grille Guard DSR<br />
Two safety brackets for fixing the Designer Grille in a frame or in a system trough<br />
System trough SM<br />
SM 180 – system troughs with heights of 90 mm or 110 mm and a width of 180 mm<br />
SM 260 – system troughs with heights of 90 mm or 110 mm and a width of 260 mm<br />
SM 320 – system troughs with heights of 90 mm or 110 mm and a width of 320 mm<br />
SM 360 – system troughs with heights of 110 mm, 140 mm, or 190 mm for a width of 360 mm<br />
SM 410 – system troughs with heights of 90 mm, 110 mm, 140 mm, or 190 mm for a width of 410 mm<br />
The system trough can be used advantageously and flexibly as an empty trough for different application<br />
areas as e. g. line guide channel for electric cables and warm water tubing.<br />
Of course, the system trough offers the usual advantages, as e. g. height adjustment by means of an adjustment<br />
block, joining technique with system connectors.<br />
The system trough can be supplied in different anodised shades.
Profiles<br />
Z frame profile ZRP 15<br />
L frame profile LRP 15<br />
L frame profile LRP 20<br />
Frames<br />
Installation frame cut to size, with<br />
overlapping edge for clean covering<br />
of recess. Window sills, work sills, air<br />
outlets etc.<br />
Anodised:<br />
- natural aluminium<br />
- light brass<br />
- brass<br />
- light bronze<br />
- dark bronze<br />
- black<br />
- Stainless steel finish<br />
- Special colours on request<br />
Powder-coated:<br />
- all RAL colours<br />
Decor on request up to a max.<br />
length of 2000 mm<br />
Z frame profile<br />
rods with 6000 mm length each, for<br />
self-installation on site.<br />
L frame profile<br />
rods with 6000 mm length each, for<br />
self-installation on site.<br />
L frame profile<br />
rods with 6000 mm length each, for<br />
self-installation on site.<br />
ZR 15<br />
LR 15<br />
LR 20<br />
System connectors<br />
Frame connectors 90°<br />
Frame connectors 180°<br />
Frame anchors<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Frame connectors for<br />
corner connections.<br />
Frame connectors<br />
for frame extensions<br />
Frame anchors<br />
The outer frame width RAB is<br />
determined by the roll grille width<br />
RB + 7 mm.<br />
Outer frame length RAL +/- 5mm<br />
A = 14.5 mm<br />
B = 8.5 mm<br />
C = 18.3 mm<br />
D = 19.8 mm<br />
The outer frame width RAB is<br />
determined by the roll grille width<br />
RB + 11 mm.<br />
Outer frame length RAL +/- 5mm<br />
A = 12 mm<br />
The outer frame width RAB is<br />
determined by the roll grille width<br />
RB + 11 mm.<br />
Outer frame length RAL +/- 5mm<br />
A = 12 mm<br />
Designer Grille