RedPup Productions 928-422-1000 - Iron Shadows

Tel: 928-422-1000 ♦ Fax 480-287-9244 ♦ sales@redpup.com
Decorative Ironwork Designs for CNC
60 Classic-style Ironwork Design Patterns
Includes the following patterns:
• 20 beautiful ironwork panels
• 10 half-circle designs
• 10 scroll patterns for railings
• 10 round scroll pattern designs and rosettes
• 10 decorative ironwork wall designs
This CD is loaded with intricate ironwork designs that you can use
to make above-door breezeways, fireplace screens, wall hangings,
coat racks, key racks, furniture, gates, railings, window grilles, etc.
Decorative
Ironwork at its best!
24 inch tall wall
candelabra cut on a
PlasmaCam→
Compatibility:
These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax
water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD
software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of
their respective companies. We are NOT affiliated with any of these companies.
Interesting Fact: Did you know that you could remove up to 90% of the smoke from plasma cutting by placing a thin tray of water below
your table to extinguish the sparks before they hit the floor and continue burning?
RedPup Productions 928-422-1000

Tel: 928-422-1000 ♦ Fax 480-287-9244 ♦ sales@redpup.com
Dog and Cat Designs for CNC
120 Dogs and 20 Cats = 140 Patterns
Create wall hangings, grave markers, refrigerator magnets,
signs, etc.
INCLUDES: Afghan Hound,Airedale Terrier,Akita,American Eskimo Dog,American Foxhound,Anatolian Shepherd,Australian Shepherd,Australian
Terrier,Basenji,Basset Hound,Beagle,Bearded Collie,Beauceron,Bedlington Terrier,Belgian Sheepdog,Belgian Tervuren,Black and Tan Coonhound,Black
Russian Terrier,Bloodhound,Border Collie,Border Terrier,Borzoi,Boston Terrier,Boxer,Brittany,Bull Terrier,Bulldog,Canaan Dog,Cattle Dog,Chesapeake
Bay Retriever,Chihuahua,Chow Chow,Cocker Spaniel,Corgi,Clumber Spaniel,Curley Coated Retriever,Dachshund,Dalmatian,Dandie Dinmont
Terrier,Doberman Pinscher,English Foxhound,English Mastiff,English Springer Spaniel,Field Spaniel,Finnish Spitz,Fox Terrier,French Bulldog,German
Pinscher,German Shepherd,German,Wire-haired Pointer,Golden Retriever,Great Dane,Great Pyrenees,Greater Swiss Mountain
Dog,Greyhound,Ibizan,Hound,Irish Setter,Irish Terrier,Irish Wolfhound,Keeshond,Parsons Jack Russell Terrier,Komondor,Kuvasz,Labrador
Retriever,Lhasa Apso,Malamute,Maltese,Manchester Terrier,Mastiff,Miniature Pinscher,Miniature Schnauzer,Newfoundland,Norwegian
Elkhound,Norwich Terrier,Nova Scotia Duck Tolling Retriever,Old English Sheepdog,Otterhound,Papillion,Pharaoh Hound,Pit
Bull,Plott,Pointer,Pomeranian,Poodle,Portuguese Water Dog,Pug,Rhodesian Ridgeback,Rottweiler,Saluki,Samoyed,Schipperke,Scottish Terrier,Shar
Pei,Shetland Sheepdog,Shiba Inu,Shih Tzu,Siberian Husky,Skye Terrier,Smooth Pointer,St. Bernard,Staffordshire Terrier,Sussex Spaniel,Swedish
Vallhund,Tibetan Mastiff,Tibetan Spaniel,Tibetan Terrier,Toy Fox Terrier,Viszla,Welsh Terrier,Whippet,Wire Fox Terrier,Wire Haired Pointing Griffon
Satisfy the dog and cat
fanatics! Use for signs, grave
markers, mailboxes, weather
vanes, refrigerator magnets,
etc.
Sell at dog shows, pet stores
and flea markets.
Compatibility:
These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax
water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD
software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of
their respective companies. We are NOT affiliated with any of these companies.
Interesting: Did you know that you might become quite popular when others discover that you have a CNC cutting machine?
RedPup Productions 928-422-1000

Tel: 928-422-1000 ♦ Fax 480-287-9244 ♦ sales@redpup.com
European-Style Ironwork Designs for CNC
90 Decorative Ironwork Tiles
Europe is well known for it's elaborate architecture and amazing ironwork. There are still many places
throughout Europe where the iron railings and gates are over 1000 years old! This handy art disc
contains 90 different designs inspired by old-fashioned European ironwork, for use in your CNC
projects such as gates, security doors, railings, fence, window grilles, furniture, etc. This disc also
includes 10 different shelf bracket patterns as well as the bonus Neuschwanstein Castle pattern.
You can tile the patterns to
create decorative panels.
Compatibility:
These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax
water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD
software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of
their respective companies. We are NOT affiliated with any of these companies.
Interesting Fact: Did you know that some of our patterns have been cut 4ft tall out of black granite stone inlaid in white granite stone, and
set into commercial buildings and sidewalks in some large cities?
RedPup Productions 928-422-1000

Tel: 928-422-1000 ♦ Fax 480-287-9244 ♦ sales@redpup.com
Farm and Tractor Designs for CNC
80 Farm and Tractor Patterns
These popular farm theme designs can be used for wall hangings,
weather vanes, signs, mailboxes, farm entrances, furniture and
gates.
This original collection includes a selection of modern tractors, antique tractors, harvesters,
livestock, barns, silos, Amish buggies, plows, fence and other farm-related patterns.
Cut these patterns on
your CNC cutting
table!
Compatibility:
These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax
water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD software
programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of their
respective companies. We are NOT affiliated with any of these companies.
Interesting Fact: Did you know that there are almost 2 million farms in the USA? More than 80% are individual family owned.
RedPup Productions 928-422-1000

Tel: 928-422-1000 ♦ Fax 480-287-9244 ♦ sales@redpup.com
Game and Fish Designs for CNC
80 Hunting and Fishing Patterns
This game and fish art package has many popular patterns that can
be used for wall hangings, gun racks, fishing rod holders, signs,
furniture, targets, key ring holders, etc.
This original collection includes a selection of deer, elk, bighorn sheep, antelope, ducks, geese,
fish, bear, pheasant, turkey quail, boar, grouse, moose, hunters, fishermen, rabbits, etc.
Patterns for the
outdoor sportsman!
Compatibility:
These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax
water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD software
programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of their
respective companies. We are NOT affiliated with any of these companies.
Interesting Fact: More than 44 million Americans six years of age and older enjoy fishing every year. An average angler spends $1,046
every year on the sport.
RedPup Productions 928-422-1000

Tel: 928-422-1000 ♦ Fax 480-287-9244 ♦ sales@redpup.com
Mimbres Indian-Style Art Designs for CNC
60 Ancient Indian Art Designs
These patterns are based upon excavated painted pottery found in
museums and private collections that can be used for amazing
security doors, furniture, southwestern gate and fence designs, and
wall decorations.
The Mimbres Indians lived in southwest New Mexico between 300-1300AD. In the last
century, thousands of painted ceramic pots have been unearthed, revealing beautiful and
mysterious artwork that is both valuable and highly sought after by archaeologists and
collectors around the world.
Compatibility:
These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax
water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD
software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of
their respective companies. We are NOT affiliated with any of these companies.
Interesting Fact: Did you know the Mimbres Indians disappeared hundreds of years ago? Although there are theories as to their demise,
no one is 100% sure what happened to them.
RedPup Productions 928-422-1000

Tel: 928-422-1000 ♦ Fax 480-287-9244 ♦ sales@redpup.com
Ocean Life Designs for CNC
60 Ocean Patterns
Use to decorate ocean themed rooms in houses, restaurants and
businesses. Excellent for use on signage for aquatic, marine,
fishing, and eatery businesses.
This original collection includes a wide selection of ocean life theme designs including
ships, nautical, fish, whales, dolphins, sharks, turtles, anchors, sea shells, islands,
lighthouses, palm trees, coral, scuba diver, mermaids and various other sea creatures.
This valuable
disc contains
ocean art that
can make you
money!
Compatibility:
These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax
water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD
software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of
their respective companies. We are NOT affiliated with any of these companies.
Interesting Facts: Did you know that oceans cover nearly 71% of the earth surface? The largest ocean is the Pacific Ocean, which is
larger than all land on earth combined.
RedPup Productions 928-422-1000

Tel: 928-422-1000 ♦ Fax 480-287-9244 ♦ sales@redpup.com
Rods, Quads, Trucks and Bikes for CNC
100 Vehicle Patterns
Use to decorate rooms in houses. Excellent for use on signage for
construction, automotive repair, automotive sales, car clubs,
motorcycle shops, etc.
This original collection includes a selection of modern cars, classic cars, modern trucks,
classic trucks, motorcycles, busses, construction equipment (backhoe, scraper, cement
truck, dump truck, trackhoe), bicycles, forklift, ATVs, tow trucks, delivery trucks
Cut these
patterns for kids
of all ages!
Compatibility:
These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax
water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD
software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of
their respective companies. We are NOT affiliated with any of these companies.
Interesting Fact: Did you know that while painted signs can fade in the sun, CNC cut signs can last more than 100 years?
RedPup Productions 928-422-1000

Tel: 928-422-1000 ♦ Fax 480-287-9244 ♦ sales@redpup.com
Sports Designs for CNC
100 Sports Patterns and 1 Special Bonus = 101 Patterns
Create wall hangings, weather vanes, refrigerator
magnets, signs, etc.
Includes the following sports and activities:
Archery, ballet, baseball, basketball, BMX bike, bodybuilding, bowling, boxing, cheerleading, fencing,
figure skating, fishing, football, golfing, gymnastics, hockey, horse racing, hunting, hurdle,
rollerblading, jogging, kayaking, lacrosse, martial arts, mountain biking, paintball, ping pong, pole
vault, racquetball, rock climbing, rugby, skateboarding, ski, snowboarding, soccer, biking, exercise,
track and field, volleyball, wakeboard, water-ski, weight lifting, surfing and wrestling.
Special Novelty Bonus!
The original "Underwater Basket
Weaving" by Shawn Bulle
This pattern is a great novelty gift that can be sold
in curiosity shops, hung in high school and
college classrooms, or given to those individuals
who don't claim to have any special talent. Now
they can take first prize in the most meaningless
activity ever!
Compatibility:
These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax
water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD
software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of
their respective companies. We are NOT affiliated with any of these companies.
Interesting Fact: Did you know that you need to finely tune cut speed, torch amperage and torch height for each different thickness and
type of metal to get that perfect cut? Ideally, after cutting a part, the slag on the metal edges should fall off just by dropping it.
RedPup Productions 928-422-1000

Tel: 928-422-1000 ♦ Fax 480-287-9244 ♦ sales@redpup.com
Way out West Designs for CNC
50 Western Silhouettes
The CD contains dozens of cowboys and horses as well as
"end of the trail", stagecoach, dreamcatcher, cowgirls, skull,
rodeo, ranching, roping, etc.
Our customers use the patterns to create coat racks, lamps, signs, ranch entries, grave
markers, napkin holders, cowboy and cowgirl bathroom door signs, key racks, wind chimes,
wall hangings, coffee tables, railings, gates, hanging pot and pan racks, light switch plates,
mailbox decorations, truck racks, trophies, paper towel holders, etc.
Compatibility:
These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax
water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD
software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of
their respective companies. We are NOT affiliated with any of these companies.
Interesting Cowboy Slang: Onions are “skunk eggs”, Beans are “Pecos strawberries” or “whistle berries” Biscuits are “hot rocks” or “soda
sinkers” or “shotgun waddin”, Molasses are “lick” or “larrup” Beef is “slow elk”, Pancakes are “splatter dabs” or “wheelers”, Coffee is
“brown gargle”, Gravy is “Texas butter”
RedPup Productions 928-422-1000

Tel: 928-422-1000 ♦ Fax 480-287-9244 ♦ sales@redpup.com
Real Western Designs for CNC
50 Western Theme Patterns
Realistic designs that can be used for wall decorations, signs,
mailboxes, weather vanes, ranch entries, furniture, grave markers
and gates
This original collection includes a wide selection of western art themes including cowboys,
Indians, rodeo, ranch, guns, gunfighters, lawmen, lizards, coyote, roadrunner, horse and
buggy, wagons, romance, humor, cattle, saloon, kokopelli, buffalo, pistol, and prospector
figures and scenes.
Compatibility:
These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax
water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD
software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of
their respective companies. We are NOT affiliated with any of these companies.
Interesting Fact: Some of the most popular ways to finish coat silhouette patterns are, spray paint, texture coat, powder coating, acid
wash, sand blast, high-heat torch flame coloring and directional sanding. Some people leave the patterns in the rain to get a rust color and
then clear-coat. Old-fashioned silver can be achieved by painting a silhouette silver and then faintly brushing black paint over the silver.
RedPup Productions 928-422-1000

Tel: 928-422-1000 ♦ Fax 480-287-9244 ♦ sales@redpup.com
Nature and Wildlife Designs for CNC
70 Wildlife Patterns
Awesome nature collection!
This original collection includes a selection of wildlife theme designs including bears, deer,
elk moose, ducks, eagles, fish, coyote, fox, bighorn sheep, frog, toad, squirrel, chipmunk,
lynx, trees and mountains, etc.
Compatibility:
These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax
water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD
software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of
their respective companies. We are NOT affiliated with any of these companies.
Interesting Fact: Some CNC cutting shops fill all wasted spaces within a pattern with other patterns such as butterflies to reduce the
amount metal scrap. They toss the excess patterns such as the butterflies into a bucket to be sold later.
RedPup Productions 928-422-1000

Tel: 928-422-1000 ♦ Fax 480-287-9244 ♦ sales@redpup.com
Call to Duty Military Designs for CNC
70 Military Patterns
Loaded with Military Vehicles and Aircraft!
This disc contains a wide assortment of military helicopters, jets, tanks, vehicles and
soldiers. As a bonus, the art CD also includes some firefighter, EMS and police patterns.
Compatibility:
These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax
water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD
software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of
their respective companies. We are NOT affiliated with any of these companies.
Interesting Fact: All of our CNC art files load into Ornamental Pro drawing software, so that you can show the customer how the patterns
would look incorporated into railings, gates, fence and furniture. www.OrnamentalPro.com
RedPup Productions 928-422-1000

Tel: 928-422-1000 ♦ Fax 480-287-9244 ♦ sales@redpup.com
RedPup Productions has been
providing quality CNC artwork for
CNC cutting machines for the past
decade.
Order anytime online at
http://www.redpup.com
or
Call 928-422-1000
In a hurry? You may request a
download to use until your discs arrive!
Price List
Good through 12/31/2013
Part # Description Price
DID Decorative Ironwork Designs for CNC $98.00
DOG Dog and Cat Designs for CNC $98.00
DUTY Call to Duty Military Designs for CNC $98.00
ESID European-Style Ironwork Designs for CNC $98.00
FARM Farm and Tractor Designs for CNC $98.00
GAME Game and Fish Designs for CNC $98.00
MISA Mimbres Indian-style Art Designs for CNC $98.00
OCEAN Ocean Life Designs for CNC $98.00
RODS Rods, Quads Trucks and Bikes for CNC $98.00
SPORTS Sports Designs for CNC $98.00
WAYWEST Way Out West Designs for CNC $98.00
WEST Real Western Designs for CNC $98.00
WILD Nature and Wildlife Designs for CNC $98.00
Compatibility:
These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax
water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD
software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of
their respective companies. We are NOT affiliated with any of these companies.
RedPup Productions 928-422-1000
http://www.ironshadows.com