491 Locks - Häfele

80
(3 9/64") 9/64
80
(3 9/64") 9/64
Dialock Wall Terminal
Dialock Wall Terminals act as intelligent switches in Access
Control Systems.
Wall Terminals contain 1 or 4 relays which act together to control
a lock or group of locks.
When an authorized key is presented, power is sent to electric
devices, such as electric strikes, gates, electric furniture locks.
Wall Terminal 2000 – TI-RFid
Reader
• Transmitter and receiver for data exchange with
Dialock key
• Transmits and receives through all non-metal materials
• Infrared interface for communication with portable
data transfer device
• Illuminated diodes red/green for optical indication
of programming action and locking status
• Connection between reader & controller RS485
(not included) RS485 cabling; 4-conductor CAT5E
• Supplied with screw clamps & box frame
• For exterior & interior use
80
(3 9/64") 9/64
60
52
52
42
Reader mounting
Ø 64
(Ø 2 33/64")
Ø 64
(Ø 2 33/64")
Dimensions in mm
Inches are approximate
573
38
(1 1/2")
38
(1 1/2")
42
80
(3 9/64") 9/64
11
(7/16")
11
(7/16") 86
(3 3/8") 3/8
Ø 64
(Ø 2 33/64")
38
(1 1/2")
Terminals must be installed by a qualified electrician, in
compliance with all governing codes.
52
42
105
(4 1/8")
11
(7/16")
86
(3 3/8") 3/8
Simple Programming
Unique code of key is learned by the Dialock
Terminal
– A green programming key is presented, followed
by user keys to be learned
– A red programming key is presented, followed
by a user key to be deleted
– All learned keys can be deleted
Controller
• Available with 1 or 4 relays
for control of connected
devices
• Inputs for entrance signals
• Serial interface (RS232) for
optional connection to
On-line Set or PC for initial
configuration
58
(2 9/32")
105
(4 1/8")
46
(1 13/16")
86
(3 3/8")
60
Sold separately:
• For DIN rail mount for Controller 917.93.006, see page 574.
• For Reader mounting, see 917.91.012 on page 574.
Customer supplied:
Reader cable RS485, CAT5E.
• For TI-RFid Simple Programming tools, see page 577.
Complete Programming*
Windows based modules for Personnel, Hotel and Clinic
applications.
• Dialock programming software and hardware not included in this catalogue.
Door Lock
12V DC
External
Alarm
Switch
(if required)
86
(3 3/8")
60
Technical Data
Voltage Supply 8-36V/DC direct current
Continuous
current intake < 150mA
Peak current use 450mA
Locks
Number of relays 1 or 4
Contact load relay bias-reducing potential
max. 60V/DC, 125V/AC
Current on contact: max. 2A
Contact rating: max 30W / 60 VA
Continuous current: max. 1A
Data retention
during power cut 10 years
Protection Class For exterior use
Reader module IP 65
Controller IP 20
Controller
Reader
Temperature range
Reader -20º C – 80º C (-4º – 176º F)
Controller 0º C – 60º C (32º – 140º F)
Relative humidity 0 to 95%
(Not condensating)
Call 1-800-423-3531 from anywhere in Canada - www.hafele.com
NO
NC
COM
Power Relay
To
12V DC
Power
Supply
Unit
Input
Max. 200 m
650 ft.
Exit Switch
(if required)
DCBA
CD
B A
Reader
Online
RxD
TxD
GND
Online Cable
3 x 2 x 0.8mm
Max. 200 m
650 ft.
46
Material: (1 13/16") plastic
Number of relays grey
1 917.01.101
58 4
(2 9/32")
917.01.104
Packing: 1 pc.
Discontinued
Dimensional data not binding. We reserve the right to alter specifications without notice.