491 Locks - Häfele

Dimensional data not binding. We reserve the right to alter specifications without notice.
Glass Door Locks
Overlay application Inset application
2.5
23.5
26
26 26
26 26
28
15
1
10
2
28
1
15
3
21
2.5
26
42
20
26
Ø22
26 26
30
6
Ø25.5
42
26
M6
10 8
26
Glass drilling diagram.
Bore glass before glass is tempered.
1
3
30
26
**
5 5
30
Ø25.5
56
26
6
13
1
Key blanks, for H series
Packing: 10 pcs.
Call 1-800-423-3531 from anywhere in Canada - www.hafele.com
25
** Screws:
M6 x 10 mm for up to
8 mm glass thickness
M6 x 12 mm for up to
10 mm glass thickness
Strike plate, glass door
cam lock
26
Gap
Angle strike
26
4 min.
Locks
Glass Door Cylinder Cam Locks
nut-mounted
for glass thickness 4 - 10 mm**
Cam rotation 90° with key trap
with 5 pin levers = 20,000 key changes
Locked Locked
Keyed different
Material: Trim caps: zinc die-cast
Cylinder: brass
Discontinued
w/ Stock
Colour Cat. No.
A 90° B 90°
nickel-plated polished [233.33.700] [233.33.710]
brass-plated polished [233.33.806] [233.33.851]
Keyed alike: key change H1
Colour Cat. No.
A 90° B 90°
nickel-plated polished [233.33.701] [233.33.711]
brass-plated polished [233.33.815] [233.33.860]
Packing: 1 pc. (includes 2 keys, 1 cam, 3 nuts, 1
angle strike, steel clamp plate and 1 plastic washer)
23.5 2.5
Glass door cam lock
Locking Travel A shown -
Closure orientation is achieved
by re-positioning the cam.
Strike plate to glass door cam lock
2 part, screw-mounted
for glass thickness, 4 - 10 mm**
allows two doors to be locked with one lock
Material: zinc die-cast
Colour Cat. No.
nickel-plated polished 233.40.712
brass-plated polished 233.40.810
Packing: 1 pc. (includes 2 M6 screws, 2 clamp
plates and 1 plastic washer)
Cat. No.
209.99.044
Dimensions in mm
Inches are approximate
550