491 Locks - Häfele
491 Locks - Häfele 491 Locks - Häfele
Dimensional data not binding. We reserve the right to alter specifications without notice. Spring Bolt Locks H Series Flat Head #6 The spring rim lock is available as a mini-bar lock with a telltale window above the cylinder casing. This version is particularly suitable for use on mini-bars in hotel rooms. When the bar is initially unlocked by hotel guest, the red telltale appears above the cylinder, indicating to the room service staff that the guest has probably removed a drink or snack which must be replaced and billed. Flat Head #6 • Master keying and General Master key systems available upon request • Please include a key plan • Please contact Häfele for current delivery time to produce Flat head screws pages 302–304 7 35 8 20 6 8 13 8 13 8 20 ø18 35 Ø30 75 64 16 21 75 64 16 20 initially unlocked, the red dis in the telltale window Key blanks, for H series Packing: 10 pcs. Call 1-800-423-3531 from anywhere in Canada - www.hafele.com Locks Spring Bolt Lock, with 18 mm diameter cylinder 5 pin levers = 20,000 key changes Backset = 20 mm Material: Case: plastic Cylinder: brass, nickel-plated matt Cat. No. Keyed different left right white 231.15.700 231.15.600 brown 231.15.100 231.15.000 Keyed alike: Cat. No. Key change H1 left right white 231.15.701 231.15.601 brown 231.15.101 231.15.001 Packing: 1 pc. (includes 2 keys and 1 cylinder rosette) Mini-Bar Spring Bolt Lock, with telltale and reset feature 5 pin levers = 20,000 key changes. Backset = 20 mm Material: Case: plastic, brown Cylinder: brass, nickel-plated matt Keyed alike: Key change H1 Cat. No. right [231.10.001] Packing: 1 pc. (includes 2 keys) Discontinued Telltale Reset Key Packing: 1 pc. Cat. No. [231.10.095] Discontinued Cat. No. 209.99.044 Dimensions in mm Inches are approximate 540
Cam Locks 1 1/8" 1/8" Dimensions in mm Inches are approximate 541 RH Door LH Door 1 1/4" 1 1/4" • Through the use of a shifter, the 360º key travel turns the cam 90º in either direction. Actual application determines which cam position is the locked position. Each lock is furnished with an alternate cam for opposite cam turn. Applications: solid lines show locked position of cam R/H Drawer Applications: solid lines show locked position of cam L/H Drawer Position of shifter on back of lock Locks • Master keying and General Master key systems High Security available upon request • Locks on this page meet or exceed ANSI/BHMA Grade 1 cylinder pull and cycle test • Approved by the WIC - Woodworkers Institute of California • Please include a key plan • Please contact Häfele for current delivery time to produce 3/8" L 5/8" 3/8" 32 Cam Locks (1 1/4") For drawer, left, or right hand applications 4 pin tumblers = 850Ø key 24 changes Cam turns 90º, key turns 360º Keyed different 3/4" 3/4" Mounting Hole Material: Flush Lipped/Overlay Colour Mounting Type Material Thickness Maximum Material Thickness Cat. No. brushed chrome Flush 1 1/16” 3/4” 235.10.400 brushed chrome Lipped/overlay 1 3/16” 7/8” 235.10.300 satin brass Flush 1 1/16” 3/4” 235.10.500 satin brass Lipped/overlay 1 3/16” 7/8” 235.10.600 Packing: 10 PCs. (1 pc. = 2 keys, 2 cams (1 left, 1 right), spur washer, and rosette) Keyed alike • Mounting Type: Flush • Cylinder length: 1 1/16”, Maximum material thickness: 3/4” Colour Keying #’s Cat. No. brushed chrome 101 235.10.401 brushed chrome 103 235.10.402 brushed chrome 107 235.10.403 brushed chrome 915 235.10.404 satin brass 107 235.10.503 satin brass • Mounting Type: Lipped/Overlay 915 235.10.504 • Cylinder length: 1 3/16”, Maximum material thickness: 7/8” Colour Keying #’s Cat. No. brushed chrome 101 235.10.301 brushed chrome 103 235.10.302 brushed chrome 107 235.10.303 brushed chrome 915 235.10.304 satin brass 107 235.10.603 satin brass 915 235.10.604 Packing: 10 pcs. (1 pc. = 2 keys, 2 cams, (1 left, 1 right), spur washer, and rosette) Key Blank Material: brass Mounting Plate for Cam Locks Used where spur washer will not embed into hard surfaces. Measures 2 1/4” x 1 1/4” Material: steel Packing: 50 pcs. Replacement Keys Material: brass Keying No. Cat No. 210.02.101 Discontinued Cat. No. Cat. No. 101 210.02.201 2 1/4” x 1 1/4” 210.02.081 103 210.02.202 Packing: 25 pcs. 107 210.02.203 Drawer 915 Packing: 10 pcs. 210.02.204 Position of shifter on back of lock Call 1-800-423-3531 from anywhere in Canada - www.hafele.com Dimensional data not binding. We reserve the right to alter specifications without notice.
- Page 1 and 2: 491 Locks Locking Systems - Overvie
- Page 3 and 4: Locking Systems - Overview Häfele
- Page 5 and 6: Decorative Keys Lever Bit The desir
- Page 7 and 8: SYMO 3000 Locking System Informatio
- Page 9 and 10: SYMO 3000 Dead Bolt Rim Lock Backse
- Page 11 and 12: SYMO 3000 Dead Bolt Rim Lock With e
- Page 13 and 14: SYMO 3000 Inlaid lock, screw-mount
- Page 15 and 16: SYMO 3000 Locking cam, straight Loc
- Page 17 and 18: SYMO 3000 Counterpiece, for glass d
- Page 19 and 20: SYMO 3000 Central locking cylinder
- Page 21 and 22: SYMO 3000 Master key for plate-cyli
- Page 23 and 24: Dimensional data not binding. We re
- Page 25 and 26: Dimensional data not binding. We re
- Page 27 and 28: Dimensional data not binding. We re
- Page 29 and 30: Dimensional data not binding. We re
- Page 31 and 32: Dimensional data not binding. We re
- Page 33 and 34: Central Locking Single Pedestal Sid
- Page 35 and 36: Central Locking Anti-Tip System Cyl
- Page 37 and 38: Anti-Tip Interlock System No Lock D
- Page 39 and 40: Cylinder Module System Accessories
- Page 41 and 42: Accessories Cylinder Module System
- Page 43 and 44: Deadbolt Locks FH Series Deadbolt L
- Page 45 and 46: Tambour and Sliding Door Locks FH S
- Page 47 and 48: Central Locking System FH Series Si
- Page 49 and 50: Cam Locks H Series Cam Lock, with c
- Page 51: Central Locking System H Series Cen
- Page 55 and 56: Cam Locks • Easily converted from
- Page 57 and 58: Cam Locks • Economical drawer loc
- Page 59 and 60: Central Locking System Accessories
- Page 61 and 62: Sliding Door Locks Dimensions in mm
- Page 63 and 64: Sliding Door Locks Glass Door Cylin
- Page 65 and 66: Dimensional data not binding. We re
- Page 67 and 68: Dimensional data not binding. We re
- Page 69 and 70: Dimensional data not binding. We re
- Page 71 and 72: Dimensional data not binding. We re
- Page 73 and 74: Dimensional data not binding. We re
- Page 75 and 76: Dimensional data not binding. We re
- Page 77 and 78: Dimensional data not binding. We re
- Page 79 and 80: Dimensional data not binding. We re
- Page 81 and 82: Dimensional data not binding. We re
- Page 83 and 84: Dimensional data not binding. We re
- Page 85 and 86: Dimensional data not binding. We re
- Page 87 and 88: Dimensional data not binding. We re
- Page 89 and 90: Dimensional data not binding. We re
- Page 91 and 92: Dimensional data not binding. We re
- Page 93 and 94: Dimensional data not binding. We re
- Page 95 and 96: Dimensional data not binding. We re
- Page 97 and 98: Dimensional data not binding. We re
Cam <strong>Locks</strong><br />
1 1/8"<br />
1/8"<br />
Dimensions in mm<br />
Inches are approximate<br />
541<br />
RH<br />
Door<br />
LH<br />
Door<br />
1 1/4" 1 1/4"<br />
• Through the use of a shifter, the<br />
360º key travel turns the cam 90º<br />
in either direction. Actual application<br />
determines which cam position is<br />
the locked position. Each lock is<br />
furnished with an alternate cam for<br />
opposite cam turn.<br />
Applications:<br />
solid lines show<br />
locked position of<br />
cam<br />
R/H Drawer<br />
Applications:<br />
solid lines show<br />
locked position of<br />
cam<br />
L/H Drawer<br />
Position<br />
of<br />
shifter<br />
on back<br />
of lock<br />
<strong>Locks</strong><br />
• Master keying and General Master key systems<br />
High Security<br />
available upon request<br />
• <strong>Locks</strong> on this page meet or exceed ANSI/BHMA Grade 1 cylinder pull and cycle test<br />
• Approved by the WIC - Woodworkers Institute of California<br />
• Please include a key plan<br />
• Please contact <strong>Häfele</strong> for current delivery time<br />
to produce<br />
3/8" L<br />
5/8"<br />
3/8"<br />
32<br />
Cam <strong>Locks</strong><br />
(1 1/4")<br />
For drawer, left, or right hand applications<br />
4 pin tumblers = 850Ø key 24 changes<br />
Cam turns 90º, key turns 360º<br />
Keyed different<br />
3/4" 3/4"<br />
Mounting Hole<br />
Material:<br />
Flush Lipped/Overlay<br />
Colour Mounting Type Material Thickness<br />
Maximum<br />
Material Thickness<br />
Cat. No.<br />
brushed chrome Flush 1 1/16” 3/4” 235.10.400<br />
brushed chrome Lipped/overlay 1 3/16” 7/8” 235.10.300<br />
satin brass Flush 1 1/16” 3/4” 235.10.500<br />
satin brass Lipped/overlay 1 3/16” 7/8” 235.10.600<br />
Packing: 10 PCs. (1 pc. = 2 keys, 2 cams (1 left, 1 right), spur washer, and rosette)<br />
Keyed alike<br />
• Mounting Type: Flush<br />
• Cylinder length: 1 1/16”, Maximum material thickness: 3/4”<br />
Colour Keying #’s Cat. No.<br />
brushed chrome 101 235.10.401<br />
brushed chrome 103 235.10.402<br />
brushed chrome 107 235.10.403<br />
brushed chrome 915 235.10.404<br />
satin brass 107 235.10.503<br />
satin brass<br />
• Mounting Type: Lipped/Overlay<br />
915 235.10.504<br />
• Cylinder length: 1 3/16”, Maximum material thickness: 7/8”<br />
Colour Keying #’s Cat. No.<br />
brushed chrome 101 235.10.301<br />
brushed chrome 103 235.10.302<br />
brushed chrome 107 235.10.303<br />
brushed chrome 915 235.10.304<br />
satin brass 107 235.10.603<br />
satin brass 915 235.10.604<br />
Packing: 10 pcs. (1 pc. = 2 keys, 2 cams, (1 left, 1 right), spur washer, and rosette)<br />
Key Blank<br />
Material: brass<br />
Mounting Plate for Cam <strong>Locks</strong><br />
Used where spur washer will not embed into hard<br />
surfaces.<br />
Measures 2 1/4” x 1 1/4”<br />
Material: steel<br />
Packing: 50 pcs.<br />
Replacement Keys<br />
Material: brass<br />
Keying No.<br />
Cat No.<br />
210.02.101<br />
Discontinued<br />
Cat. No.<br />
Cat. No.<br />
101 210.02.201<br />
2 1/4” x 1 1/4” 210.02.081<br />
103 210.02.202<br />
Packing: 25 pcs.<br />
107 210.02.203<br />
Drawer<br />
915<br />
Packing: 10 pcs.<br />
210.02.204<br />
Position<br />
of<br />
shifter<br />
on back<br />
of lock<br />
Call 1-800-423-3531 from anywhere in Canada - www.hafele.com<br />
Dimensional data not binding. We reserve the right to alter specifications without notice.