491 Locks - Häfele
491 Locks - Häfele 491 Locks - Häfele
Dimensional data not binding. We reserve the right to alter specifications without notice. Central Locking Lateral File Anti-Tip System Cylinder Module System Häfele provides a complete system for central locking of desks and credenzas, with one lock mounted in a minimum 25 mm front exposed rail. A B • See page 513 for snap-in lock cores and protective cap (must be ordered separately) Insert, push until they snap together Insert, push until they snap togehter Lateral File Application 70 22 4.5 17.5 15 21 42 32 Pan head screws pages 304–305 44 32 ø16.5 67 30 32 9.5 19 64 11 108 17 K 16.5 14.5 • See page 530 for cylinder rosettes Bar Retaining Bracket N Shaft Clip M or MM Flexible Shaft Additional Locking Pin D Cylinder Body G Lateral File Actuator Call 1-800-423-3531 from anywhere in Canada - www.hafele.com J Lockbar HA-HB Anti-tip Wedges Locks D Central Locking System Body Accommodates flexible shaft M or MM Material: Lock case: nylon Cylinder housing: zinc die-cast Colour Cat. No. black/unfinished 237.46.003 Packing: 10 pcs. G Actuator Transmits movement of flexible shaft M or MM to vertical movement of lockbar L . Note: an additional locking pin J is required to transfer movement - see drawing above. Material: steel; Mechanism: plastic Colour Cat. No. zinc-plated/unfinished 237.44.023 Packing: 10 pcs. HA-HB Anti-tip Wedges Prevents more than one drawer from being opened at a time, keeping the cabinet from tipping forward. Meets or exceeds BIFMA specifications. Material: nylon black Wedge A 237.44.372 Wedge B 237.44.363 Packing: 10 pcs. For Accessories: L Lockbar J Locking Pins Q Drawer Wedges K Bar Retaining Brackets Miscellaneous Strikes, see page 529 L Pan Head #8 Dimensions in mm Inches are approximate 524
Anti-Tip Interlock System No Lock Dimensions in mm Inches are approximate 525 Snapper Actuator • Used for applications calling for an anti-tip system that does not require a lock • Does not require the use of D or E or M flexible shaft • Secure against jarring out of place during shipping • For added assurance, use wedge lock listed below Material: steel Colour Cat. No. zinc-plated 237.44.113 Packing: 100 pcs. 30 45 11 61 8 61 Pan Head #8 J Locking Pins Actuator L Lockbar Wedges Wedge Lock • Use only with anti-tip system above, without lock • Prevents jamming due to lockbar bounce caused during shipping • The wedge lock is marked “remove after shipping” and usually drops off when the drawers are opened the first time Material: plastic Colour Cat. No. red 237.44.990 Packing: 10 pcs. For Accessories: L Lockbar J Locking Pins Q Drawer Wedges K Bar Retaining Brackets Miscellaneous Strikes, see page 529 Locks Pan head screws pages 304–305 Call 1-800-423-3531 from anywhere in Canada - www.hafele.com Dimensional data not binding. We reserve the right to alter specifications without notice.
- Page 1 and 2: 491 Locks Locking Systems - Overvie
- Page 3 and 4: Locking Systems - Overview Häfele
- Page 5 and 6: Decorative Keys Lever Bit The desir
- Page 7 and 8: SYMO 3000 Locking System Informatio
- Page 9 and 10: SYMO 3000 Dead Bolt Rim Lock Backse
- Page 11 and 12: SYMO 3000 Dead Bolt Rim Lock With e
- Page 13 and 14: SYMO 3000 Inlaid lock, screw-mount
- Page 15 and 16: SYMO 3000 Locking cam, straight Loc
- Page 17 and 18: SYMO 3000 Counterpiece, for glass d
- Page 19 and 20: SYMO 3000 Central locking cylinder
- Page 21 and 22: SYMO 3000 Master key for plate-cyli
- Page 23 and 24: Dimensional data not binding. We re
- Page 25 and 26: Dimensional data not binding. We re
- Page 27 and 28: Dimensional data not binding. We re
- Page 29 and 30: Dimensional data not binding. We re
- Page 31 and 32: Dimensional data not binding. We re
- Page 33 and 34: Central Locking Single Pedestal Sid
- Page 35: Central Locking Anti-Tip System Cyl
- Page 39 and 40: Cylinder Module System Accessories
- Page 41 and 42: Accessories Cylinder Module System
- Page 43 and 44: Deadbolt Locks FH Series Deadbolt L
- Page 45 and 46: Tambour and Sliding Door Locks FH S
- Page 47 and 48: Central Locking System FH Series Si
- Page 49 and 50: Cam Locks H Series Cam Lock, with c
- Page 51 and 52: Central Locking System H Series Cen
- Page 53 and 54: Cam Locks 1 1/8" 1/8" Dimensions in
- Page 55 and 56: Cam Locks • Easily converted from
- Page 57 and 58: Cam Locks • Economical drawer loc
- Page 59 and 60: Central Locking System Accessories
- Page 61 and 62: Sliding Door Locks Dimensions in mm
- Page 63 and 64: Sliding Door Locks Glass Door Cylin
- Page 65 and 66: Dimensional data not binding. We re
- Page 67 and 68: Dimensional data not binding. We re
- Page 69 and 70: Dimensional data not binding. We re
- Page 71 and 72: Dimensional data not binding. We re
- Page 73 and 74: Dimensional data not binding. We re
- Page 75 and 76: Dimensional data not binding. We re
- Page 77 and 78: Dimensional data not binding. We re
- Page 79 and 80: Dimensional data not binding. We re
- Page 81 and 82: Dimensional data not binding. We re
- Page 83 and 84: Dimensional data not binding. We re
- Page 85 and 86: Dimensional data not binding. We re
Dimensional data not binding. We reserve the right to alter specifications without notice.<br />
Central Locking Lateral File Anti-Tip System<br />
Cylinder Module System<br />
<strong>Häfele</strong> provides a complete system for central locking of desks and<br />
credenzas, with one lock mounted in a minimum 25 mm front<br />
exposed rail.<br />
A<br />
B<br />
• See page 513 for snap-in lock cores<br />
and protective cap (must be ordered<br />
separately)<br />
Insert, push<br />
until they snap<br />
together<br />
Insert, push<br />
until they snap<br />
togehter<br />
Lateral File Application<br />
70<br />
22<br />
4.5<br />
17.5<br />
15<br />
21<br />
42 32<br />
Pan head screws pages 304–305<br />
44<br />
32<br />
ø16.5<br />
67<br />
30<br />
32<br />
9.5<br />
19 64<br />
11 108<br />
17<br />
K<br />
16.5<br />
14.5<br />
• See page 530 for cylinder rosettes<br />
Bar Retaining<br />
Bracket<br />
N Shaft Clip<br />
M or MM<br />
Flexible Shaft<br />
Additional<br />
Locking<br />
Pin<br />
D Cylinder Body<br />
G Lateral File Actuator<br />
Call 1-800-423-3531 from anywhere in Canada - www.hafele.com<br />
J<br />
Lockbar<br />
HA-HB Anti-tip Wedges<br />
<strong>Locks</strong><br />
D Central Locking System Body<br />
Accommodates flexible shaft M or MM<br />
Material: Lock case: nylon<br />
Cylinder housing: zinc die-cast<br />
Colour Cat. No.<br />
black/unfinished 237.46.003<br />
Packing: 10 pcs.<br />
G Actuator<br />
Transmits movement of flexible shaft M<br />
or MM to vertical movement of lockbar L .<br />
Note: an additional locking pin J is required to<br />
transfer movement - see drawing above.<br />
Material: steel; Mechanism: plastic<br />
Colour Cat. No.<br />
zinc-plated/unfinished 237.44.023<br />
Packing: 10 pcs.<br />
HA-HB<br />
Anti-tip Wedges<br />
Prevents more than one drawer from being opened at<br />
a time, keeping the cabinet from tipping forward.<br />
Meets or exceeds BIFMA specifications.<br />
Material: nylon<br />
black<br />
Wedge A 237.44.372<br />
Wedge B 237.44.363<br />
Packing: 10 pcs.<br />
For Accessories:<br />
L Lockbar<br />
J Locking Pins<br />
Q Drawer Wedges<br />
K Bar Retaining Brackets<br />
Miscellaneous Strikes, see page 529<br />
L<br />
Pan Head<br />
#8<br />
Dimensions in mm<br />
Inches are approximate<br />
524