491 Locks - Häfele
491 Locks - Häfele 491 Locks - Häfele
Lock Cores Cylinder Module System • Separates the lock core from cylinder housing, any combination of locking systems can be obtained • Manufacturer can install fully functional locking systems • Simplifies the planning of locking systems, changes can be made without difficulty 15.8 • Lock cores can be replaced with the aid of the removal key Snap-In Lock Core, Suitable For Any Cylinder Body 5 plate levers = 500 possible key changes Dimensions in mm Inches are approximate Insert, Insert, push push until they until snapthey snap together togehter 513 Locks Keyed different Material: zinc die-cast, unfinished; Plate levers: brass; Keys: brass, nickel-plated Lock face: nickel polished nickel matt brass polished bronzed epoxy brass antique black epoxy Cat. No. 210.04.606 210.04.710 210.04.803 210.04.106 210.14.102 210.04.302 Packing: 50 pcs. Keyed alike Lock face: nickel polished nickel matt brass polished bronzed epoxy brass antique black epoxy Keying #’s Cat No. 100 TA 210.04.615 210.04.720 210.04.812 210.04.115 210.14.111 210.04.311 101 TA 210.04.624 210.04.721 210.04.821 210.04.124 210.14.120 210.04.320 102 TA 210.04.633 210.04.722 210.04.830 210.04.133 210.14.139 210.04.339 103 TA 210.04.642 210.04.723 210.04.849 210.04.142 210.14.148 210.04.348 104 TA 210.04.651 210.04.724 210.04.858 210.04.151 210.14.157 210.04.357 105 TA 210.04.660 210.04.725 210.04.867 210.04.160 210.14.166 210.04.366 106 TA 210.04.679 210.04.726 210.04.876 210.04.179 210.14.175 210.04.375 107 TA 210.04.688 210.04.727 210.04.885 210.04.188 210.14.184 210.04.384 108 TA 210.04.697 210.04.728 210.04.894 210.04.197 210.14.193 210.04.393 109 TA 210.04.704 210.04.729 210.04.901 210.04.204 210.14.200 210.04.400 Packing 10 pcs. (includes 2 keys) Cylinder Rosette For any Cylinder Body Note: Requires 19 mm diameter hole for installation with lock cylinders. Protective cap Keeps interior of cylinder housing free of paint and dirt after lock is installed. Material: PVC Packing: 100 pcs. 24 7.6 17.4 Material: brass Colour Cat. No. nickel polished 210.04.062 nickel matt 210.04.070 brass polished 210.04.054 bronzed 210.04.017 brass antique 210.04.053 black 210.04.035 Packing: 10 pcs. Cat. No. 210.02.095 2 Removal Key To remove lock cores Material: brass Packing: 1 pc. Master key, fits all TA lock cores (see table above) Material: brass Packing: 1 pc. The cylinder housings and lock cores are marked (see diagram, below). A series of furniture doors can all be locked with the same direction of turn, if the markings are positioned identically. Square spindle 16 3 Marking Cat. No. 210.02.004 Cat. No. 210.02.059 Key blanks Can be cut to replace broken or lost keys Material: brass Cat. No. 210.02.005 Packing: 1 pc. Call 1-800-423-3531 from anywhere in Canada - www.hafele.com Dimensional data not binding. We reserve the right to alter specifications without notice.
Dimensional data not binding. We reserve the right to alter specifications without notice. Deadbolt Locks Cylinder Module System Deadbolt Lock • Throw: 9 mm (3/8") Deadbolt Lock • Throw: 13 mm (1/2") 36 13 19 32 45 22.5 Deadbolt Lock – Offset Bolt, for face-frame cabinets • Throw: 13 mm (1/2") 61 48 13 19.5 32 45.5 • See page 513 for snap-in lock cores Insert, push until they snap together Insert, push until they snap togehter • See page 527 for drill bit 16.5 Pan head screws pages 304–305 2.5 16 7.5 9 2.5 20.5 20.5 A 3 32 ø16.5 1/2" Throw 22.5 ø16.5 2" 32 45 Lock shown in locked position 8 18 • Offset cam eliminates need for strike plates on face frame application where door or drawer overlays face frame. 18 Call 1-800-423-3531 from anywhere in Canada - www.hafele.com Locks Pan Head #8 Material: Lock case: nylon, black Cylinder housing: zinc die-cast, unfinished Bolt: steel, nickel-plated Cat. No. left/right 232.12.302 drawer 232.12.311 Packing: 10 pcs. Material: Lock case: nylon, black Cylinder housing: zinc die-cast, unfinished Bolt: steel, nickel-plated Cat. No. left/right 232.18.304 drawer 232.18.313 Packing: 10 pcs. • Rotate cylinder core 180º to install Material: Lock case: nylon, black Cylinder housing: zinc die-cast, unfinished Bolt: steel, nickel-plated A Cat. No. left/right 15 mm 232.18.348 drawer 15 mm 232.18.358 left/right 22 mm 232.18.350 drawer Packing: 10 pcs. 22 mm 232.18.360 • Rotate cylinder core 180º to install Cylinder Rosette For any Cylinder Body Note: Requires 19 mm diameter hole for installation with lock cylinders. 24 7.6 17.4 Material: brass Colour Cat. No. nickel polished 210.04.062 nickel matt 210.04.070 brass polished 210.04.054 bronzed 210.04.017 brass antique 210.04.053 black 210.04.035 Packing: 10 pcs. 2 Dimensions in mm Inches are approximate 514
- Page 1 and 2: 491 Locks Locking Systems - Overvie
- Page 3 and 4: Locking Systems - Overview Häfele
- Page 5 and 6: Decorative Keys Lever Bit The desir
- Page 7 and 8: SYMO 3000 Locking System Informatio
- Page 9 and 10: SYMO 3000 Dead Bolt Rim Lock Backse
- Page 11 and 12: SYMO 3000 Dead Bolt Rim Lock With e
- Page 13 and 14: SYMO 3000 Inlaid lock, screw-mount
- Page 15 and 16: SYMO 3000 Locking cam, straight Loc
- Page 17 and 18: SYMO 3000 Counterpiece, for glass d
- Page 19 and 20: SYMO 3000 Central locking cylinder
- Page 21 and 22: SYMO 3000 Master key for plate-cyli
- Page 23: Dimensional data not binding. We re
- Page 27 and 28: Dimensional data not binding. We re
- Page 29 and 30: Dimensional data not binding. We re
- Page 31 and 32: Dimensional data not binding. We re
- Page 33 and 34: Central Locking Single Pedestal Sid
- Page 35 and 36: Central Locking Anti-Tip System Cyl
- Page 37 and 38: Anti-Tip Interlock System No Lock D
- Page 39 and 40: Cylinder Module System Accessories
- Page 41 and 42: Accessories Cylinder Module System
- Page 43 and 44: Deadbolt Locks FH Series Deadbolt L
- Page 45 and 46: Tambour and Sliding Door Locks FH S
- Page 47 and 48: Central Locking System FH Series Si
- Page 49 and 50: Cam Locks H Series Cam Lock, with c
- Page 51 and 52: Central Locking System H Series Cen
- Page 53 and 54: Cam Locks 1 1/8" 1/8" Dimensions in
- Page 55 and 56: Cam Locks • Easily converted from
- Page 57 and 58: Cam Locks • Economical drawer loc
- Page 59 and 60: Central Locking System Accessories
- Page 61 and 62: Sliding Door Locks Dimensions in mm
- Page 63 and 64: Sliding Door Locks Glass Door Cylin
- Page 65 and 66: Dimensional data not binding. We re
- Page 67 and 68: Dimensional data not binding. We re
- Page 69 and 70: Dimensional data not binding. We re
- Page 71 and 72: Dimensional data not binding. We re
- Page 73 and 74: Dimensional data not binding. We re
Dimensional data not binding. We reserve the right to alter specifications without notice.<br />
Deadbolt <strong>Locks</strong><br />
Cylinder Module System<br />
Deadbolt Lock<br />
• Throw: 9 mm (3/8")<br />
Deadbolt Lock<br />
• Throw: 13 mm (1/2")<br />
36<br />
13<br />
19<br />
32<br />
45<br />
22.5<br />
Deadbolt Lock – Offset Bolt, for face-frame cabinets<br />
• Throw: 13 mm (1/2")<br />
61<br />
48<br />
13<br />
19.5<br />
32<br />
45.5<br />
• See page 513 for snap-in lock cores<br />
Insert, push<br />
until they snap<br />
together<br />
Insert, push<br />
until they snap<br />
togehter<br />
• See page 527 for drill bit<br />
16.5<br />
Pan head screws pages 304–305<br />
2.5<br />
16<br />
7.5<br />
9<br />
2.5<br />
20.5<br />
20.5<br />
A<br />
3<br />
32<br />
ø16.5<br />
1/2"<br />
Throw<br />
22.5<br />
ø16.5<br />
2"<br />
32 45<br />
Lock shown<br />
in locked position<br />
8<br />
18<br />
• Offset cam eliminates need for strike<br />
plates on face frame application where<br />
door or drawer overlays face frame.<br />
18<br />
Call 1-800-423-3531 from anywhere in Canada - www.hafele.com<br />
<strong>Locks</strong><br />
Pan Head<br />
#8<br />
Material: Lock case: nylon, black<br />
Cylinder housing: zinc die-cast, unfinished<br />
Bolt: steel, nickel-plated<br />
Cat. No.<br />
left/right 232.12.302<br />
drawer 232.12.311<br />
Packing: 10 pcs.<br />
Material: Lock case: nylon, black<br />
Cylinder housing: zinc die-cast, unfinished<br />
Bolt: steel, nickel-plated<br />
Cat. No.<br />
left/right 232.18.304<br />
drawer 232.18.313<br />
Packing: 10 pcs.<br />
• Rotate cylinder core 180º to install<br />
Material: Lock case: nylon, black<br />
Cylinder housing: zinc die-cast, unfinished<br />
Bolt: steel, nickel-plated<br />
A Cat. No.<br />
left/right 15 mm 232.18.348<br />
drawer 15 mm 232.18.358<br />
left/right 22 mm 232.18.350<br />
drawer<br />
Packing: 10 pcs.<br />
22 mm 232.18.360<br />
• Rotate cylinder core 180º to install<br />
Cylinder Rosette<br />
For any Cylinder Body<br />
Note: Requires 19 mm diameter<br />
hole for installation with lock<br />
cylinders.<br />
24 7.6<br />
17.4<br />
Material: brass<br />
Colour Cat. No.<br />
nickel polished 210.04.062<br />
nickel matt 210.04.070<br />
brass polished 210.04.054<br />
bronzed 210.04.017<br />
brass antique 210.04.053<br />
black 210.04.035<br />
Packing: 10 pcs.<br />
2<br />
Dimensions in mm<br />
Inches are approximate<br />
514