491 Locks - Häfele

491 

Locks 

Locking Systems - Overview ..................................................................493 

Lever Bit/Skeleton Keys and Accessories .......................................494–496 

Symo 3000 Locking System ...........................................................497–511 

Cylinder Module System .................................................................512–529 

Cam Locks.............................................................516, 530, 537, 541, 543 

Deadbolt Locks...............................................514–515, 519, 531–532, 542 

Sliding Door Locks..........................................................533, 538, 547–548 

Central Locking System ..................................................520–524, 534–536 

High Security Locks........................................................................538–546 

Glass Door Locks ...........................................................517–518, 549–550 

Call 1-800-423-3531 from anywhere in Canada - www.hafele.com 

Dimensional data not binding. We reserve the right to alter specifications without notice.

Dimensional data not binding. We reserve the right to alter specifications without notice. 



Espagnolette Locks ........................................................................551–553 

Push-button Locks .................................................534, 536, 538, 554–558 

Combination Locks .........................................................................559–560 

Strike Plates, Bolts, Locking Strips .................................................562–565 

Electronic Furniture Locking Systems ............................................566–581 

492

Locking Systems - Overview 

Häfele offers you a comprehensive range of locking technology solutions for every installation situation, from locks with lever bit keys to 

Dialock electronic locking systems. Choose the lock type according to your individual requests: security, economic efficiency or design. 

Mechanical Locking Systems: 

Locks with Lever Bit Keys 

Key changes: 1 

Locks with lever bit keys are often used where 

visual attractiveness is more of an issue than 

safety. Due to the great choice of decorative 

keys available in different designs and materials, 

the appearance of the lock can be adapted to 

the furniture. 

Cylinder with Plate Levers 

Key changes: 100-500 

Häfele plate cylinders are a simple and economic 

solution for many applications. Locks 

with plate cylinders are available with up to 500 

key changes with suitable master keys. Häfele 

offers you a multitude of locks with fixed plate 

cylinders as well as removable plate cylinders 

for the cylinder module systems. 

Locks with Pin Tumbler Cylinder 

Key choices: 850-20,000 

Where safe locking is an important issue 

(e.g. office buildings, store fixtures, or hospitals) 

locks with pin tumbler cylinders are the ideal 

solution. 

493 

Push Button Locks 


Well suited for the recreation or boating industry, 

these locks operate by push button, without a key. 

All push button locks can be used in wet areas. 

When locked there is no protrusion of the knob. 

Combination Locks 

Combination locks are suitable for safe 

deposit boxes, lockers, changing rooms 

and wardrobes. 

Electronic Locking System Dialock 

Key changes: 

Dialock is a contact-less operating identification 

and locking system. It completely replaces the 

combination of mechanical key and lock. There 

are Dialock locks for furniture which are compatible 

with complete program solutions for hotels, condos, 

hospitals, retail stores, etc. 




Escutcheons 

6 

22 

22 

32 

23 

22 

22 

20 

13 

18 

18 

6 

6 

6 

18 

185.10.524/622 

4 

185.30.133-731-839 

46 

32 

10 

21 

4 

20 



Material: zinc with fixing disc 

Colour Cat. No. 

gold coloured polished 181.07.803 

Packing: 25 pcs. 



bronzed and brushed 181.07.107 




nickel-plated matt 182.19.602 


Material: brass with fixing disc 


brushed 185.10.524 


Discontinued 

Material: brass with fixing disc 

brushed 

Cat. No. 

185.30.839 


Discontinued 

Material: brass 

Cat. No. 

polished 118.20.885 

Packing: 25 pcs. (includes #4 mounting screws) 

Discontinued 

Dimensions in mm 

Inches are approximate 

494

Decorative Keys 

Lever Bit 

The desired key must match the type of lock selected in terms of: 

a) bit size and shape 

b) length of shank 



495 

Bit 

dimensions 

Bit 

dimensions 

Bit 

dimensions 

Bit 

dimensions 

8 

8 

8 

8 

6 

6 

6 

6 


Effective shank length: 38 mm 

Material: zinc, die-cast 


brass polished 200.68.580 

burnished brown 200.68.188 











burnished brown 200.58.182 



8 

6 

Effective shank length 




brass-plated polished 200.66.586 




English Locks 

Lever Bit 

• Small size, ideal for jewelry boxes etc. 

• With screw-mounted locking strike plate 

Half-Mortise Lock with Lever Bit Key 

Half-Mortise Lock with Lever Bit Key 

Flat head screws pages 302–304 

35 

29 

5.5 7 

15 

11 

22 

21.5 

18 

16 

22 

5 

25.5 

7 7.5 

6.0 

44 

Flat Head 

#5 

51 

Flat Head 

#5 

Backset 11 mm 

Keyed alike 

Material: Lock: brass 

Key: malleable iron, plated 

Strike plate: brass 


Spare key 




Cat. No. 

218.35.129 

Cat. No. 

209.99.610 

Backset 15 mm 

Keyed alike 

Material: Lock: brass 

Key: malleable iron, plated 

Strike plate: brass 

Cat. No. 

218.35.156 

Packing: 20 pcs. (1 pc. = 1 lever bit key and 

strike plate) 

Spare key 

Cat. No. 

209.99.620 




496

SYMO 3000 Locking System 

Information 

SYMO 3000 is the worldwide unique furniture locking system from 

Häfele. Without tools and time-consuming installation, it provides 

maximum flexibility at minimum expenditure and effort. 

The locking system SYMO 3000 is based on the principle to separate 

lock, body and cylinder core. 

Due to the multitude of components within the SYMO 3000 system, 

all present and future applications can be covered with maximum 

freedom during planning and execution. 

All components within the SYMO 3000 system can be combined at 

random and each component can be exchanged, modified or 

upgraded at any time. 

Locking plans can be modified easily and at minimum costs. Only the 

cylinder core is replaced (without tools), the lock and the piece of 

furniture remain untouched. 

One lock for all cases 

SYMO 3000 offers the whole range of locking technology for furniture: 

From rim locks to inlaid locks, from espagnolette locks to central 

locking systems, from glass door locks to roller shutter locks. All 

components can be combined at random. In order to cover any 

desire conceivable today and in the future, the SYMO 3000 is 

constantly developed and extended by new types of locks. 

497 


Efficient furniture production 

Since the lock and the cylinder core are separated, the locks can be 

pre-mounted in the furniture and are fully functional through their 

protective caps. The protective caps can be replaced easily and 

without tools by the desired removable core cylinders at any time. The 

furniture can be produced independently from its future use and from 

the required locking plans, and can be equipped with the desired 

locks. The result is efficient mass production. The individual locks can 

be integrated into the locking plan by inserting the removable cores at 

any time, even after the furniture is set up. 

Locking plan - simple and easy 

SYMO 3000 enables setting up simple as well as highly complex 

master key locking systems. The locking plan is put into practice by 

simply inserting the cylinder cores at any time independent of the 

production, delivery, or set up of the furniture. In addition, the 

locking plan can also be modified and extended at any time. Every 

modification can be implemented easily and economically by 

exchanging the SYMO 3000 cylinder cores. 





Information 

Plate cylinder or pin-tumbler cylinder? 

With the SYMO 3000 locking system, you have a choice between 

plate cylinders and pin-tumbler cylinders. 

Plate cylinder 

The plate cylinder removable cores of the SYMO 3000 system offer a 

simple and economical solution with the convenience of 

removable cylinders. The plate cylinder is available with up to 3,000 

different key changes and the suitable master keys. 

Pin-tumbler cylinder 

Where safe locking is an important issue (e.g. in office buildings or 

hospitals), the SYMO 3000 STW is a good option. 

With its compact design and six pairs of pins, it offers up to 20,000 

different key changes. Häfele is the only supplier in the world 

offering the removable core pin-tumbler cylinder with a reversible key, 

ensuring the highest possible comfort in locking. 

Identical drilling dimenison for all lock versions 

The uniform cylinder housing diameter of 18 mm (19 mm including 

rosette) allows a uniform drilling size for all locks within the locking 

system. 

18 mm 

without rosette 

18 mm 

with rosette 

One protective cap, several functions 

The protective caps of the SYMO 3000 locks shield the 

interior of the cylinder housing from dirt or damage during 

construction phase. Due to their design, they also function as building 

site keys and allow lock operation with a coin or screwdriver. 

After construction is completed, the protective caps can be removed 

easily without tools and replaced by the desired cylinder cores. 

Mounting plate cylinder removable cores 

Inserting the cylinder core 

Remove the protective cap 

from the cylinder housing 

Engage the cylinder core 

with slight pressure 

Removing the cylinder core 



Removable core cylinders mounted without tools 

Tools are not required for inserting and removing the cylinder cores, 

which can also be done at any time after the locks have been 

installed. The cylinder core can only be inserted or taken out when 

the lock is in an unlocked position. Do not treat the cylinder cores 

with graphite. 

Insert the removal key into 

the cylinder core 

Mounting pin-tumbler cylinder removable cores 

Inserting the cylinder core 

Remove the protective cap 

from the cylinder housing 

Removing the cylinder core 

Insert the removal key into 

the cylinder core 

Push the cylinder core with 

the inserted key into the 

cylinder housing 

Take the cylinder core out of 

the cylinder housing using 

the removal key 

Insert the cylinder core into 

the cylinder housing and 

engage it with slight pressure 

Take the cylinder core out of 

the cylinder housing using 

the removal key and applying 

slight counterpressure 



498

SYMO 3000 Dead Bolt Rim Lock 

Backset 23 mm, long bolt travel, screw-mounted 



499 

20 

4 3.5 

24 

40 

Ø18 

Backset 25 mm, short bolt travel, screw-mounted 

2.5 3.5 8 

16 

With adjustable backset, screw-mounted 

16 

2.5 3 

8 

D 

42 

32 

Ø18 

D 

47 

57 

18.5 

Ø18 

8 

40 

10 

32 

42 

Cylinder 

housing 

length 

Cylinder 

housing 

length 

32 

42 

8 

22 

• For cylinder cores that are inserted from the front on site 

• Backset D: 23 mm 

• Bolt travel: 24 mm 




• Bolt travel: 8 mm 



Locking 

direction 

Cylinder housing length Colour Cat. No. 

left 22 nickel-plated 232.26.610 

black 232.26.310 

right 22 nickel-plated 232.26.600 

black 232.26.300 

drawer 22 nickel-plated 232.26.620 

version black 232.26.320 

32 nickel-plated 232.26.680 

black 232.26.380 

Packing: 1 pc. 

Discontinued 


• Backset D: 15 - 40 mm (adjustable in steps of 5mm) 

Flat Head 

#6 

Locking direction Cylinder housing length Nickel-plated 

left 22 232.25.610 

right 22 232.25.600 

drawer version 22 232.25.620 


32 232.25.680 


Flat Head 

#6 

Flat Head 

#6 


nickel-plated 


232.26.690 






With extended cylinder housing, screw-mount 

For cylinder cores that are inserted from the front on site. 

10.5 

42 

20 

7.5 

4 

10.5 

42 

20 

20 

32 

42 

Ø18 

20 

32 

42 

Ø18 


7.5 

4 

D 

13 

45 

D 

13 

22.5 


• Cylinder housing length: 45 mm 




Flat Head 

#6 

Locking direction Nickel-plated 

left 232.26.612 

right 232.26.602 

drawer version 


232.26.622 


Flat Head 


#6 

Locking direction Version Nickel-plated 

left with locked bolt 232.37.621 

without locked bolt 232.37.624 

right with locked bolt 232.37.620 


drawer version with locked bolt 232.37.622 


Packing: 1 pc. Discontinued 



500


With extended cylinder housing, screw-mount 

Lock handle, screw-mount 

For SYMO 3000 dead bolt rim lock, with extended cylinder housing. 

Striking plate, screw-mount 

For SYMO 3000 dead bolt rim lock. 



501 

25 

42 

25 

4.5 

10 

23.8 

2 

3.5 

144 

Installation 

3.5 

14 

M4 

26 

8 

13 


• For cylinder cores that are inserted from the front on site. 


• Cylinder housing length: 22 mm 


Locking direction nickel-plated 

left 232.29.610 

right 232.29.600 


Flat Head 

#6 

Flat Head 

#6 



nickel-plated 232.26.699 


Material: steel 








SYMO 3000 

Striking plate, screw-mount 

15 9 

Roller shutter rim lock, screw-mount 

16 

3 

3 

60 

19 

44 

3 

60 

19 

44 

Hook bolt mortise lock, recess or screw-mount 

16 

2 

7 

55 

22 

40 

13.5 

42 32 

3.5 

2.5 

2 

7 

1 

18.5 

24.5 

32 

42 

Ø18 

Striking plate, for SYMO 3000 roller shutter rim lock, screw-mount 

14 

3 

13 

4 

2 

13 D 

2 

13 D 

Ø18 

14 

76 


67 

3 

30 

2413 10 

67 

40 

Ø18 

76 

23 

30 

24 10 

8 

2 

46 

40 

5 

2 


23 

46 





• Drawer version locking direction 

• Dimensions: 60 x 16 x 2 mm 


• Backset D: 22.5 mm 

• Right locking direction 

3 

1 

4 

Installation 

1. Insert the cylinder core. 

2. Insert the lock case into the 

door. 

3. Insert the cylinder housing 

through the drill hole. 

4. Turn the cylinder housing 

slightly to the left. 

5. Screw in the safety screw. 

Flat Head 

#6 

Finish Cat. No. 

nickel-plated 


232.37.990 


Flat Head 

#6 


nickel-plated 

Packing: 1 pc. (includes 1 strike plate) 

232.30.620 


Flat Head 

#6 


nickel-plated [233.30.990] 


Text 

Change 


Flat Head 

#6 




Packing: 1 pc. (includes 1 cylinder housing and 1 

striking plate) Discontinued 

The cylinder housing is now firmly 

fixed to the lock case. 



502

SYMO 3000 

Inlaid lock, screw-mount 

Inlaid flap lock, screw-mount 



503 

8 

2.5 3 

Cam lock, with mounting plate, screw-mount 

10 

15 

4 2 

21 

2 3 

16 

40 

Ø18 

18 

Ø18 

D 

7 

35 

Ø18 

3 

22 

32 

42 

22 

4 

26 

5 





Drawer version Cat. No. 


Packing: 1 or 20 pcs. 



Drawer version Cat. No. 




• Straight cam 

• For door thickness: max. 22 mm 

• Closure direction: 180° (convertible) 

Flat Head 

#6 

Flat Head 

#6 

Flat Head 

#5 


Closure direction Colour Cat. No. 

A (D, F, G) nickel-plated 235.59.600 

black 

235.59.300 

B (C, E, H) nickel-plated 235.59.610 

black 

235.59.310 

Packing: 1 pc. (includes 1 locking cam, 1 fixing screw 

and 1 washer, pre-mounted) 





SYMO 3000 

Cam lock, nut attachment 

115 

2.2.5 

2.23 (28) 

1 

Cam lock, nut attachment with cranked cam 

11.5 

2.2.5 

14 

Cam lock, nut attachment with hook cam 

4.5 

35 

43 

Drilling 

pattern 

115 

1 

4.5 

4.5 

35 

Drilling 

pattern 

223 15 

1 

Steel clip, for cam locks with nut attachment 

30 

24 

15.5 0.5 

2.2.5 6.5 

Ø24 

43 

33 

16 

11 6 

18.5 

Drilling 

pattern 

40 

Ø24 

16 

Ø24 

16 

Notch for 

steel clip 

29 

Door 

thickness 

19 

30 (35) 

29 

Door 

thickness 

30 

19 

29 

19 

30 

Door 

thickness 

Drilling 

pattern 16 

19 





• For door thickness: max. 17 mm or 22 mm 


• Installation: screw-mount with hexagon nut 


Door thickness 

mm 

Closure 

direction 

nickel-plated, 

polished 

17 A (D, F, G) 235.88.600 

B (C, E, H) 235.88.610 

22 A (D, F, G) 235.88.620 

B (C, E, H) 235.88.630 

Packing: 1 or 20 pcs. (includes 1 locking cam, 

1 mounting nut (pre-mounted) 

and 1 retaining washer) 


• Cranked cam 





Closure direction nickel-plated, polished 

A (D, F, G) 235.88.820 

B (C, E, H) 235.88.830 



and 1 retaining washer, 

galvanized steel) 


• Straight hook cam 





Closure direction nickel-plated, polished 

A (D, F, G) 235.88.720 

B (C, E, H) 235.88.730 



and 1 retaining washer) 

• For mounting cam locks on metal doors, and as 

additional protection against twisting 

• Straight hook cam 

• For sheet thickness: 0.8 - 1.5 mm 







504

SYMO 3000 

Locking cam, straight 

Locking cam, cranked 

Hook cam 

Glass door lock for hinged doors 



505 

8 

Ø5 

15 

16 

15 

Ø30 

29 

9 

12 

220 

45 

48 

9 

2.2.5 

9 

2.2.5 

9 

2.2.5 

26 

• Length: 45 mm 



Length yellow, chromated 

43 235.88.980 

48 235.88.982 



Cat. No. 

galvanized 235.88.981 


• Length: 40 mm 



yellow, chromated 235.88.983 



• For glass door thickness: 4 - 6 mm 

• Installation: 40 mm 



nickel-plated polished 

233.43.700 

brass-plated polished 

233.43.500 

nickel-plated matt 

233.43.600 

Packing: 1 pc. (includes 3 rubber disks and 

2 threaded screws) 




SYMO 3000 

29 

10 

2 

29 

10 

2.5 

2 

16 

1 

25 

5 

26 

42 

16 

1 

212.5 

25 

24 

5 

30 

26 

42 

21 

26 

6 

24 

125 

100 

Ø18 

30 

26 

2.5 

6 

10 28 

Installation 


23.5 

6 

21 


Glass door lock, for sliding doors 



• Rack clips on, cylinder slides onto rack 

Material: Housing: zinc, die-cast; Rack: stainless steel 




Packing: 1 pc Discontinued 

Installation 

2.5 

23.5 

Overlay mounting 

1 

28 

1 

28 

Inset mounting 

15 15 

26 26 

Glass door cam lock, screw-mounted 





[•Handing: left or right versions] 

Text 

Change 


Finish [Handing] Cat. No. 

nickel-plated left 233.42.600 

polished right 233.42.610 

brass-plated left 233.42.500 

polished right 233.42.510 

nickel-plated left 233.42.700 

matt right 233.42.710 

Packing: 1 pc. (includes 1 locking cam, 1 mounting 

nut, 1 angled striking plate, 1 clamping 

plate, 1 clamping rosette) Discontinued 



506

SYMO 3000 

Counterpiece, for glass door cam lock 



507 

5 

3 

30 

30 

Ø25.5 

Ø25.5 

56 

26 

26 

13 

1 

Application 

Where glass double doors are used together with the counterpiece, 

the following closure directions of the glass door cam lock are required. 

Push and turn lock, screw-mount 

Installation 

9.5 

7 

7 

9.5 

50 

10 

6 

Angled striking plate, for push and turn lock 

screw-mount 

18 

Closure 

direction A (right) 

32 

Closure 

direction B (left) 

42 

3 

38.5 

M6 

1.5 

Ø18 

40 

1 

8 

5 

7.5 

25 

25 

4 

5 

21 

8 

18 

11 

Installation 

26 

26 



26 

26 26 

26 26 

26 

23.5 

2.5 

• Counterpiece double doors 

• For glass thicknesses: 4 - 10 mm 

• Rack clips on, cylinder slides onto rack 

Material: Housing: zinc, die-cast; Rack: stainless steel 


nickel-plated polished 233.40.712 




233.40.610 

Function 

The rotary bolt protects high sliding doors from being 

pushed in. 

The lock can only be locked and unlocked with the key. 


• Closure direction: 180° 


Locking direction nickel-plated 

closure direction A 234.67.610 

closure direction B 234.67.660 



Flat Head 

#6 

Cat. No. 






SYMO 3000 

Push-button cylinder 

Locking sleeve, for push-button cylinder 

Central locking rotary lock 

Open 

Locked 

Central 

locking bar 

6 

Mount central locking rotary cylinder on the right-hand side. 

Central locking rotary lock 

34 


18 

50 32 

20 

Ø6 

Ø6 

18 

25 

18 

3 

Ø7 

38.5 

Ø9 

Ø13.7 

30 

43.5 

34 

Arresting pin 

Bar guide 

Ø18 

SYMO 3000 

Central locking 

rotary cylinder 

30 

43.5 

3 22 

10 

3 

22 

10 

25 

Ø18 

5.5 

Ø18 





• With internal M5 thread in locking pin for use with central 

locking systems 

• Installation: Rack to clip on, cylinder to slide onto rack 




black 234.65.300 


Discontinued 

Order Information: 

Only use cylinder cores with restricted rotation and direction 

right-locking together with pin-tumbler cylinder removable cores. 

• Accommodates the locking pin 

• Mounts in drilled hole 

Flat Head 

#6 





Order Information: 

Only use cylinder cores with restricted rotation and direction 

right-locking together with pin-tumbler cylinder removable cores. 



• With lifting pin 

• Mounts in the front panel 

With mounting plate on one side 


Travel mm Colour Cat. No. 




With mounting plate on two sides 


Travel mm Colour Cat. No. 


black 234.98.300 





508

SYMO 3000 

Central locking cylinder with bar 

Bar guide for central locking cylinder 

Arresting pin 

Central locking bar 



509 

600 

40 

16 

Ø7 

16 

3 

38 

20 

19 

3 

7 

15 

1.5 

6 

22 

2.5 

4.5 

19 

20 

3 

Ø18 

26 

38 

Ø6 

Open 

Locked 




• Bar length: 600 mm 

• Travel: 8 mm 

• Screw-mounted 

Material: Cylinder: zinc, die-cast; Bar: aluminum 

Cat. No. 


black 237.48.300 



SYMO 3000 

Central locking 

rotary cylinder 

Arresting pin 

Bar guide 

Flat Head 

#6 

Material: Cylinder: zinc, die-cast; Bar: aluminum 

Cat. No. 

237.23.006 



Cat. No. 

6.5 237.22.120 

9.0 237.22.086 

13.0 237.22.100 

Packing: 10 pcs. (includes 1 M4 grub screw, with SW2 

hexagon socket - pre-mounted) 

Material: aluminum 

Length bright 

600 237.10.002 

800 237.10.004 

1,000 237.10.006 

1,500 237.10.009 


Discontinued 





PLW SYMO 3000 

Plate-cylinder removable core 

With folding key 

With different key changes, sorted 

• Each package contains 50 different key changes out of specified range. 

• Suitable master key (MK): HS 3 (Cat. No. 210.11.003) 

Key changes Cat. No 

SH 0601-0650 210.41.751 

SH 0651-0700 210.41.752 

SH 0701-0750 210.41.753 

SH 0751-0800 210.41.754 

SH 0801-0850 210.41.755 

SH 0851-0900 210.41.756 

SH 0901-0950 210.41.757 

SH 0951-1000 210.41.758 

SH 1001-1050 210.41.759 

SH 1051-1100 210.41.760 

Packing: 50 pcs. (includes 2 folding keys) 

Plate-cylinder removable core, without key 

Keys for plate-cylinder removable core 

15.5 

15.5 

Ø12.5 

Ø12.5 

21.7 

1.5 


SH 1101-1150 210.41.761 

SH 1151-1200 210.41.762 

SH 1201-1250 210.41.763 

SH 1251-1300 210.41.764 

SH 1301-1350 210.41.765 

SH 1351-1400 210.41.766 

SH 1401-1450 210.41.767 

SH 1451-1500 210.41.768 

SH 1501-1550 210.41.769 

SH 1551-1600 210.41.770 

Order Information 

• Each package contains 50 cylinder cores out of the specified range 

of key changes, 1 pc. of each key change. 

21.7 

1.5 

• For all locks and rotary handles within the SYMO 3000 system 

• Left and right locking direction 

• With 6 plate levers 

• 3,000 different key changes are possible 


SH 1601-1650 210.41.771 

SH 1651-1700 210.41.772 

SH 1701-1750 210.41.773 

SH 1751-1800 210.41.774 

SH 1801-1850 210.41.775 

SH 1851-1900 210.41.776 

SH 1901-1950 210.41.777 

SH 1951-2000 210.41.778 

SH 2001-2050 210.41.779 

SH 2051-2100 210.41.780 

• For all locks and rotary handles within the 

SYMO 3000 system 


• With 6 plate levers 





SH 2101-2150 210.41.781 

SH 2151-2200 210.41.782 

SH 2201-2250 210.41.783 

SH 2251-2300 210.41.784 

SH 2301-2350 210.41.785 

SH 2351-2400 210.41.786 

SH 2401-2450 210.41.787 

SH 2451-2500 210.41.788 

SH 2501-2550 210.41.789 

SH 2551-2600 210.41.790 

Keyed alike 


Key change Cat. No. 

SH 0001 210.46.601 


Material: Housing: zinc, die-cast; Plate levers: brass 

Key change nickel-plated 

SH 0001 - 0200 210.41.601 

SH 0001 - 0600 210.41.602 

SH 0001 - 2600 210.41.603 



• Please specify the required key change and quantity (per key change) 




folding key nickel-plated with black cap 210.11.060 

Packing: 2 pcs. on key ring 


• Please specify the required key change and quantity (per key change) 



510

SYMO 3000 

Master key for plate-cylinder removable core, PLW SYMO 3000 

Removal key 





Key cap 

Pin-tumbler cylinder removable core, STW SYMO 3000 

Replacement and additional key 


• Key changes 0001 - 1,000 are available 

• Please specify the required key changes 



511 

15.5 

Ø12.5 



new silver 210.45.000 

Packing: 1 pc. (includes 1 key) 

25 

5 

Key blank 

• For duplicate keys or additional keys 

• Not suitable for removal keys or master keys 

• For all locks and rotary handles within the 

SYMO 3000 system 


• With 6 pairs of pins 





Version Key change nickel-plated 

HS 1 SH 0001 - 0200 210.11.001 

HS 2 SH 0001 - 0600 210.11.002 

HS 3 


SH 0001 - 2600 210.11.003 





Material: plastic (soft) 


grey 210.90.504 

brown 210.90.102 

black 210.90.308 


Discontinued 



Packing: 1 pc. (includes 1 key) 


• Key changes 0001 - 1,000 are available 

• Please specify the required key changes 

• Number series for keyed-alike changes, e.g. 0001-0200 

Removal key 

• For removing the pin-tumbler cylinder removable 

core of the types STW SYMO 3000 and MK system 

Standard. 



new silver 210.45.090 






15.5 

Ø12.5 

21.7 

1.5 



SYMO 3000 Plate-Cylinder Removable Core • For all lock bodies within the SYMO 3000 system 

• Locking direction: left and right 

• Locking system: with 6 plate levers 

• Key changes: 3000 different key changes are possible 

STW SYMO 3000 

Pin-Tumbler Cylinder Removable Core 

New 

Item 

Supplied accessories: 

– 2 keys 

With different key changes 

• Master key not possible 

Material: Housing: zinc die-cast 

Lever plate: brass 




Keyed alike 


– see next page 


SH 1 210.40.601 

SH 2 210.40.602 

SH 3 210.40.603 

SH 4 210.40.604 

SH 5 210.40.605 

SH 6 210.40.606 

SH 7 210.40.607 

SH 8 210.40.608 

SH 9 210.40.609 

SH 10 


210.40.610 

• For all lock bodies within the SYMO 3000 system 

• Locking direction: left and right 

• Locking system: with 6 pairs of pins 

• Key changes: 20,000 different key changes are possible 

Supplied accessories: 

– 1 key 

With different key changes 

• Master keying and General Master key systems 

available upon request. Please include a key plan. 

Plan on 8-10 weeks to produce. 

Material: Housing: zinc die-cast 




Keyed alike 


001 A 210.45.601 

002 A 210.45.602 

003 A 210.45.603 

004 A 210.45.604 

005 A 210.45.605 




511 A


Cylinder Module System 

• Small diameter, low profile 

• High quality/long life 

• Master keyed 

• Numbered on lock face and keys 

• Meets or exceeds ANSI/BIFMA 

requirements 

The Cylinder Module System from 

Häfele is the most versatile locking 

system for your home or office 

furniture needs. It is based on 

separate lock modules that allow you 

to create many combinations of 

locking systems. Separate lock bodies 

and lock cores are installed with a 

“snap”, and can only be removed with 

removal key. 

Complete Keying Versatility 

• Furniture can be keyed easily to your 

customers requirements at any time. 

• Key numbers can be readily changed by 

your customer in the field. 

Ease of Finishing 

• Furniture may be finished without lock plug 

installed, eliminating the need for masking. 



Simplified Inventory Management 

• One stock of lock cores fulfills all locking requirements. 

Any lock core fits into 

Any lock body 



512

Lock Cores 


• Separates the lock core from cylinder housing, any combination of locking systems can be obtained 

• Manufacturer can install fully functional locking systems 

• Simplifies the planning of locking systems, changes can be made without difficulty 

15.8 

• Lock cores can be replaced with the aid of the removal key 

Snap-In Lock Core, Suitable For Any Cylinder Body 

5 plate levers = 500 possible key changes 



Insert, 

Insert, 

push 

push 

until 

they until snapthey 

snap 

together togehter 

513 


Keyed different 

Material: zinc die-cast, unfinished; Plate levers: brass; Keys: brass, nickel-plated 

Lock face: nickel polished nickel matt brass polished bronzed epoxy brass antique black epoxy 

Cat. No. 210.04.606 210.04.710 210.04.803 210.04.106 210.14.102 210.04.302 


Keyed alike 

Lock face: nickel polished nickel matt brass polished bronzed epoxy brass antique black epoxy 

Keying #’s Cat No. 

100 TA 210.04.615 210.04.720 210.04.812 210.04.115 210.14.111 210.04.311 

101 TA 210.04.624 210.04.721 210.04.821 210.04.124 210.14.120 210.04.320 

102 TA 210.04.633 210.04.722 210.04.830 210.04.133 210.14.139 210.04.339 

103 TA 210.04.642 210.04.723 210.04.849 210.04.142 210.14.148 210.04.348 

104 TA 210.04.651 210.04.724 210.04.858 210.04.151 210.14.157 210.04.357 

105 TA 210.04.660 210.04.725 210.04.867 210.04.160 210.14.166 210.04.366 

106 TA 210.04.679 210.04.726 210.04.876 210.04.179 210.14.175 210.04.375 

107 TA 210.04.688 210.04.727 210.04.885 210.04.188 210.14.184 210.04.384 

108 TA 210.04.697 210.04.728 210.04.894 210.04.197 210.14.193 210.04.393 

109 TA 210.04.704 210.04.729 210.04.901 210.04.204 210.14.200 210.04.400 

Packing 10 pcs. (includes 2 keys) 

Cylinder Rosette 

For any Cylinder Body 

Note: Requires 19 mm diameter 

hole for installation with lock 

cylinders. 

Protective cap 

Keeps interior of cylinder housing 

free of paint and dirt after lock is 

installed. 

Material: PVC 


24 7.6 

17.4 



nickel polished 210.04.062 

nickel matt 210.04.070 


bronzed 210.04.017 

brass antique 210.04.053 

black 210.04.035 


Cat. No. 

210.02.095 

2 

Removal Key 

To remove lock cores 



Master key, fits all TA lock cores 

(see table above) 



The cylinder housings and lock cores 

are marked (see diagram, below). 

A series of furniture doors can all be 

locked with the same direction of turn, 

if the markings are positioned 

identically. 

Square spindle 

16 3 

Marking 

Cat. No. 

210.02.004 

Cat. No. 

210.02.059 

Key blanks 

Can be cut to replace broken or lost keys 


Cat. No. 

210.02.005 





Deadbolt Locks 


Deadbolt Lock 

• Throw: 9 mm (3/8") 

Deadbolt Lock 

• Throw: 13 mm (1/2") 

36 

13 

19 

32 

45 

22.5 

Deadbolt Lock – Offset Bolt, for face-frame cabinets 

• Throw: 13 mm (1/2") 

61 

48 

13 

19.5 

32 

45.5 

• See page 513 for snap-in lock cores 

Insert, push 

until they snap 

together 

Insert, push 


togehter 

• See page 527 for drill bit 

16.5 

Pan head screws pages 304–305 

2.5 

16 

7.5 

9 

2.5 

20.5 

20.5 

A 

3 

32 

ø16.5 

1/2" 

Throw 

22.5 

ø16.5 

2" 

32 45 

Lock shown 

in locked position 

8 

18 

• Offset cam eliminates need for strike 

plates on face frame application where 

door or drawer overlays face frame. 

18 



Pan Head 

#8 

Material: Lock case: nylon, black 

Cylinder housing: zinc die-cast, unfinished 

Bolt: steel, nickel-plated 

Cat. No. 

left/right 232.12.302 

drawer 232.12.311 





Cat. No. 

left/right 232.18.304 

drawer 232.18.313 


• Rotate cylinder core 180º to install 




A Cat. No. 

left/right 15 mm 232.18.348 

drawer 15 mm 232.18.358 

left/right 22 mm 232.18.350 

drawer 


22 mm 232.18.360 

• Rotate cylinder core 180º to install 

Cylinder Rosette 

For any Cylinder Body 

Note: Requires 19 mm diameter 

hole for installation with lock 

cylinders. 

24 7.6 

17.4 






bronzed 210.04.017 


black 210.04.035 


2 



514


Cylinder Locking System 

Deadbolt Lock - double doors with straight bolts 

• Throw: 13 mm (1/2") 

Deadbolt Lock - double doors with offset bolt for overlay doors 

• Throw: 13 mm (1/2") 



515 

52 

(2 1/16") 

36 

(1 7/16") 

13 

(1/2") 

• See page 513 for snap-in lock 

cores. (must be ordered separately) 

46 

(1 13/16") 

46 

(1 13/16") 

Insert, push 


together 

13 

(1/2") 

36 

(1 7/16") 

Insert, push 


togehter 

36 

(1 7/16") 

1" 

Use strike plate 

239.61.350 

ø16.5 

ø16.5 

5 

(3/16") 

4 

(3/16") 

17 

(11 /16") 

4 

(3/16") 

Groove or 

strike plate 

239.61.319 

1" 

A 

Upper 

left hand 

B 

Lower 

left hand 


B 

Upper 

right hand 

A 

Lower 

right hand 

• Locks both doors without the need of lock strips or 

a spring catch. 


Cylinder housing: zinc die-cast 

Mounting Type Cat. No. 

lower right hand or upper left hand A 232.35.301 

lower left hand or upper right hand B 232.35.300 




Mounting Type Cat. No. 

lower right hand or upper left hand A 232.35.303 

lower left hand or upper right hand B 232.35.302 


• See page 529 for angle strike & strike plate 





Cam Lock Body 

With straight, extended lever. 

Rotation: 180º. 

Cam Lock Body 

With outward-cranked lever. 

Cam Lock Body 

With inward-cranked lever. 

Rotation: 180º. 

Cam Lock Body 

With outward-cranked, 

hooked lever. Rotation: 180º. 

15 

42 

15 

42 

15 

42 

15 

32.5 

16.5 

2.3 

16.5 

2.3 

21.5 

21.5 

16.5 

2.3 

18 

16.5 

7 

18 

12 

18 

2.3 2.5 

18 



Cam Locks 

• Horizontal drawer lock with 90º rotation is ideal for 4-sided box construction with drawer front attached. Can be mounted at the top of the 

drawer front and the 90º throw allows it to fit in a space as small as 7/8"(the 180º rotation will not work because cam will rotate down and hit 

the drawer box). 

Material: Cylinder housing: zinc die-cast, unfinished 

Lever: steel, nickel-plated 

Cat. No. Packing 

horizontal installation drawer 235.08.303 10 pcs. 

vertical installation door 


235.08.358 10 pcs. 



Cat. No. 

horizontal installation drawer, 180º 235.08.009 

horizontal installation drawer, 90º 235.08.018 

vertical installation door, 180º 235.08.054 


Universal Cam Lock Body 

42 

• Adjustable from 

12 

12 

15 

7 /8" (22 mm) – 13 /8" (35 mm) by turning the mounting flange. Barrel conveniently marked with lines to facilitate setting depth. 

Rotation - 90º. Can be oriented in any of the 3 positions above. 


cores. (must be ordered separately) 

Insert, push 


together 

Insert, push 


togehter 

Cam lock spacer 

Used to space locks in 16 

mm ( 5 /8") material. Used with 

cam locks 235.08.series and 

front mount central lock 

234.85.001 only. 5 mm 

16.5 

Material: nylon 


black 210.02.080 


18 

10 

44 mm 

16.5 

32 

38 

19 mm 



Cat. No. 

horizontal installation drawer 235.08.107 

vertical installation door 235.08.152 




Cat. No. 

horizontal installation drawer 235.08.205 

vertical installation door 235.08.250 


38 

32 

48 

Material: zinc unfinished, steel, nickel-plated 

Cat. No. 

235.09.000 

Packing: 10 pcs. (includes 2 different cams) 

• See page 530 for cylinder rosettes. 



516

Glass Door Locks 


• Small high quality appearance 

• Fully cushioned to avoid glass damage 

– Neoprene gasket on front surface 

– Plastic washer on back surface 

• Unique retainer nut allows secure tightening by hand 



517 

31 

(1 1/4") 

Cylinder body 

rotates through 

hole in glass - 

no need to 

remove cam. 

Cam in 

locked 

position 

22 

(7/8") 

42 

(1 11/16") 

7/8" diameter 

hole, centred 

7/8" from edge. 

Bore glass before 

glass is tempered. 

32 

(1 1/4") 

23 

(15/16") 


5 (3/16") Finish cap is attached 

to give finished appearance 

7 (5/16") 

Cam in 

unlocked 

position 

22 

(7/8") 

Finish cap is attached 

to give finished appearance. 

22 

(7/8") 

42 

(1 11/16") 

Nut washer is 

hand tightened 

to fasten cylinder 

body to glass. 

Cam in 

unlocked 

position 

Cam in 

locked 

position 

• Two piece design for quick mounting – user 

does not need to assemble cam 

• Finish cap provides improved appearance 

and eliminates glare of nickel-plated cams 

31 

(1 1/4") 

Glass Door Lock - Horizontal Installation 

For glass thickness up to 3/8" thick 

Cam rotation: 90º 

Material: Outer body: nylon, black 

Face plate: brass-plated 

Finish cap: plastic, black 







Cylinder body 

rotates through 

hole in glassno 

need to 

remove cam. 

22 

(7/8") 

Nut washer is 

hand tightened 

to fasten cylinder 

body to glass 

7/8" diameter 

hole, centred 

7/8" from edge. 

Bore glass before 

glass is tempered. 

Glass Door Lock - Vertical Installation 

For glass thickness up to 3/8" thick 

Cam rotation: 90º 


Face plate: brass-plated 

Finish cap: plastic, black 








cores (must be ordered separately) 

Insert, push 

until they snap Insert, push 


together togehter 

• See page 529 for angle strikes 






• Non-bore glass door locks 

• Small high quality appearance 

• Integrated knob to open door 

• Fully cushioned to avoid glass damage 

– Neoprene gasket on front surface 

– Plastic tightening screw on back surface 

Lock slips onto 

edge of glass door 

at any location-no 

boring required. 

Fixed tab 

13 

(1/2") 

11 

(7/16") 

31 

(1 1/4") 

Cam in locked position 

42 

(1 11/16") 

13 

(1/2") 

31 

(1 1/4") 

Cam in locked 

position 

29 

(1 1/8") 

10 

(3/8") 

Ø22 

(7/8") 

Fixed tab provides 

stop for opposing door. 

42 

(1 11/16") 

13 

(1/2") 

8 

(5/16") 

Set screw 

tightens lock 

to glass using 

a flat-bladed 

screwdriver 



at any locationno 

boring required. 


cores (must be ordered separately) 

Insert, push Insert, push 


until they togehter snap 

together 



at any locationno 

boring required 



Glass Door Lock - Vertical Installation 

For glass doors up to 5/16" thick. 


Face plate and cylinder: brass-plated 







Glass Door Lock - Horizontal Installation 










Glass Door Lock - Double Door 










• See page 529 for angle strikes 



518

Special Deadbolt Locks 


The most economical arrangement for locking two drawers simultaneously. Only a single hole needs to 

be drilled in the desk or cabinet side panel and the lock is then installed vertically. 

A drawer wedge is then screwed to each drawer side panel. Once the cylinder core has been installed, 

the lock is ready for use. 

Central Locking System - 2 drawer, for two drawers with lockbar 

• Throw: 13 mm (1/2") 

Wardrobe/Overhead Storage Lock 

• Throw: 13 mm (1/2") 

Push-button Lock 

• Compatible with all cores 

• Small 3/4" diameter for improved appearance 

• Throw: 8 mm (5/16") 



519 

16.5 

17.5 

13 19 

7 

2.5 

32 

45 

32 mm 

117 

19 mm 

18 

23 

ø16.5 

48 

8 

Drawer Front 




Bars: steel, nickel-plated 

Cat. No. 

234.92.300 


Accessory Q , see page 528 



Bars: steel, black powder-coated 

Bar retainers: nylon, black 

Cat. No. 

horizontal installation 223.63.300 

vertical installation 223.63.355 

Packing: 1 set: (1-lock body, 2-bars, 1220 mm (48") 

each, 6-bar retainers) 

Suitable strike plates, see page 529 

Material: Lock case: nylon 



application 

Drawer Side 

Panel 

Cabinet/desk 

side panel 

Insert, push 

Insert, until push they snap 

togehter 


together 

Cat. No. 

234.65.000 


Q 

Drawer Wedge 


cores & protective cap 

• See page 530 for cylinder rosettes 



Cam Lock Hasp 

• Durable construction secures doors, drawers, 

or lockers when used with a padlock 

• Attractive plated finish 

• Includes straight cam 24 mm (15/16”) long 

• Maximum material thickness: 28 mm (1 1/8”) 


Ø10 mm 

(3/8”) 

19 mm 

(3/4”) 

25 mm 

(1”) 

8 mm 

(5/16”) 

33 mm 

(1 5/16”) 

16 

24 mm 

(15/16”) 

19.5 

25 mm 

(1”) 

19.5 

Requires 19.5 mm (3/4”) 

diameter hole 

*Minimum order quantity is 1 piece. 

L 

28 

(1 1/8") 



Cam Lock Hasp, for wood doors, drawers, or lockers 

Material: zinc die-cast, plated 

Accessories: steel 

Finish/Colour Item No. 

polished chrome 235.17.200 

black 235.17.300 

matt nickel 235.17.600 

*Packing: 150 pcs. (includes hex nut, rosette, 

24 mm straight cam, attaching nut 

and attaching screw) 

Flat Head 

#6 

Offset Cams, order separately (replace straight cams) 

Material: steel; Finish: yellow chromate 

Offset Item No. 

3 mm (1/8”) 219.13.910 

6 mm (1/4”) 219.13.930 

9 mm (3/8”) 219.13.950 

*Packing: 20 pcs. 



519A


Central Locking Single Pedestal Front Mount 


Permits locking from the front either in a fixed position in a lock strip or in a drawer front, in which case it travels 

with the drawer. Can be installed on the left or right side of the cabinet as preferred. 

A 

Typical Applications 


Desk with Lock 

Mounted in Fixed Rail (1" min.) 

Lock body with lifting pin, 180º rotation; 12 mm lift 

16.5 

32 

42 

AA Lockbar clip 

To fit lock body A mounts at any location along lockbar L see combination tool on page 527 

1.2 

7 

Lock 

Modular Pedestal with Lock 

Mounted in Drawer Front 


cores and protective cap (must be 

ordered separately) 

Insert, push 


together 

Insert, push 


togehter 

32 

AA 

12 

J 

40.5 

ø6.4 

35 

15 

L 

Q 

2 

9.5 

Side Panel 

Drawer Wedge 

18 

28.5 

• See page 529 for locking accessories 

Lock 

Strip 

1" min. 

Drilling & routing diagram 


A 

4 

17.5 

Material: zinc die-cast 

40.5 

16.5 


Cat. No. 

unfinished 234.85.001 




zinc-plated 234.87.998 


For Accessories: 

L Lockbar 

J Locking Pins 

Q Drawer Wedges 

K Bar Retaining Brackets 

Miscellaneous Strikes, 

see page 529 



520

Central Locking Single Pedestal Side Mount 


An economical arrangement which allows installation of the lock body in the side panel at any position. 

Can be installed on the left or right side of cabinet as preferred. 

B Side Mount Lock Body with locking lug 

180º rotation, 12 mm lift 

16.5 8 18 

BB Lockbar clip 

2 

To fit lockbar clip to lockbar L see combination tool, see page 353 

1.2 



521 

Typical Applications 

Desk with Lock 

Mounted in Kneespace Panel 

Lock 

Mobile Pedestal with Lock 

Mounted in Side Panel 

42 


32 

17 

L 

BB 

Q 

J 

B 

Drawer 

Wedge 

51.5 


3.8 

12 

21 

4 

Side Panel 

Drawer 

Front 

8.7 

17 

Drilling & routing diagram 



4 

17.5 


25 

16.5 

Cat. No. 





zinc die-cast 234.86.900 



cores and protective cap 

Insert, push 


togehter 

Insert, push 


together 


L Lockbar 





see page 529 



Central Locking Rail Mount Lock 


Häfele provides a complete system for central locking of desks 

and credenzas, with one lock mounted in a minimum 25 mm front 

exposed rail. 

L 

Lockbar 

F 

Actuator 

N Shaft Clip 

M or MM 

Flexible Shaft 

C D or E 

Cylinder Body 

5 

22 

17.5 

10.5 

18 

23 

38 

44 

32 

12.5 

16.5 

90.6 

45 

F 

ø12.5 

Actuator 

30 43 

• See page 529 for locking accessories 

J 

J 

4.5 

30 

Additional 

locking pins 

are required. 

Adjustable 

Drawer 

Locking 

Pin 

7.5 

8 

14 



C Central Locking System Body - Centre Drawer Application 

With centre drawer bolt, accommodates flexible shaft M or MM 




black/unfinished 237.46.054 


D Central Locking System Body - without Centre Drawer 

Accommodates flexible shaft M or MM 






E 

Desk 

Central Locking System Body - Double Door Application 

With centre bolt to lock 2 doors 







F Lockbar Actuator 

Transmits horizontal rotation of flexible shaft M or MM 

to vertical movement of lockbar L . 


Spindle guide: plastic 


galvanized/black 234.87.023 


Note: An additional locking pin J is required to 

transfer movement - see drawing above. 


cores 

Insert, push 


together 

Insert, push 


togehter 

Credenza With Double Doors 


L Lockbar 





see page 529 



522

Central Locking Anti-Tip System 


• Meets or exceeds ANSI/BIFMA requirements 

• Only one drawer can be opened at a time 

• For up to 4 drawers maximum 



523 

A 

B 

A 

B 

Marking 

Step 

1 

S 

B 

B 

A 

A 

Installation 

of arresting 

pins 

Stop bracket 


When any drawer is pulled open, 

the wedges on that drawer move 

the lockbar into a locked position, 

preventing any further drawers from 

being opened 

• Installation of wedges A and B, must be 

installed as shown in drawing at left 

• When wedges are installed in the proper 

positions as shown, only one drawer will ever 

be open at any one time, even if two drawers 

are pulled at exactly the same time! 

Step 

2 




Central Locking Lateral File Anti-Tip System 


Häfele provides a complete system for central locking of desks and 

credenzas, with one lock mounted in a minimum 25 mm front 

exposed rail. 

A 

B 

• See page 513 for snap-in lock cores 

and protective cap (must be ordered 

separately) 

Insert, push 


together 

Insert, push 


togehter 

Lateral File Application 

70 

22 

4.5 

17.5 

15 

21 

42 32 


44 

32 

ø16.5 

67 

30 

32 

9.5 

19 64 

11 108 

17 

K 

16.5 

14.5 


Bar Retaining 

Bracket 

N Shaft Clip 

M or MM 


Additional 

Locking 

Pin 

D Cylinder Body 

G Lateral File Actuator 


J 

Lockbar 

HA-HB Anti-tip Wedges 


D Central Locking System Body 







G Actuator 

Transmits movement of flexible shaft M 

or MM to vertical movement of lockbar L . 

Note: an additional locking pin J is required to 

transfer movement - see drawing above. 

Material: steel; Mechanism: plastic 


zinc-plated/unfinished 237.44.023 


HA-HB 

Anti-tip Wedges 

Prevents more than one drawer from being opened at 

a time, keeping the cabinet from tipping forward. 

Meets or exceeds BIFMA specifications. 


black 

Wedge A 237.44.372 

Wedge B 237.44.363 



L Lockbar 




Miscellaneous Strikes, see page 529 

L 

Pan Head 

#8 



524

Anti-Tip Interlock System 

No Lock 



525 

Snapper Actuator 

• Used for applications calling for an anti-tip system 

that does not require a lock 

• Does not require the use of D or E or M flexible shaft 

• Secure against jarring out of place during shipping 

• For added assurance, use wedge lock listed below 





30 

45 

11 

61 

8 

61 

Pan Head 

#8 

J Locking 

Pins 

Actuator 

L Lockbar 

Wedges 

Wedge Lock 

• Use only with anti-tip system above, without lock 

• Prevents jamming due to lockbar bounce caused 

during shipping 

• The wedge lock is marked “remove after shipping” 

and usually drops off when the drawers are opened 

the first time 

Material: plastic 


red 237.44.990 



L Lockbar 





see page 529 






Anti-Tip Interlock System 

• Meets or exceeds ANSI/BFIMA requirements 

• Only one drawer can be opened at a time 

Anti-tip Snapper 

• Mounts to side of cabinet 

• 1 required for 2 drawers 

Drawer Clip 

• Mounts to side of drawers 

• 2 required per snapper (shown above) 

Linkage Arm 

• 2 pcs. required for 4 drawers 

Snapper 

X = Distance 

between snappers 

Lockbar with 

2 arresting pins 

installed 

Linkage 

arms 

Drawer 

Clips 

18 

(11/16") 

18 

(11/16") 

44 

(1 3/4") 

Distance 

between 

pins on 

lockbar 

= X - 1" 

Pan Head 

#8 

Pan Head 

#8 

21 

(7/8") 

1 3/16" 

30 

1 3/16" 

30 

1/8" 

3 

1/8" 

3 

6 1/16" 

152 


1 1/4" 

32 

1 3/4" 

46 

48 

(1 7/8") 

• Components required for 2 

drawer applications: 

• 1 anti-tip snapper 

• 2 drawer clips 

1 3/8" 

35 

1 1/4" 

32 

1 1/4" 

32 

1 3/8" 

35 2 7/8" 

73 

• Components required for 4 

drawer applications: 

• 2 anti-tip snappers 

• 4 drawer clips 

• 2 linkage arms 

• Lockbar and 2 arresting pins - 

see accessories on page 527 

2 7/8" 

73 

2 1/2" 

64 

1 1/4" 

32 1 5/8" 

41 

1 3/4" 

46 

7 5/8" 

194 

Minimum 

distance 

between 

drawer 

slides 

19 

(3/4) 





unfinished/black 237.43.310 




black 237.43.320 




black 237.43.330 


Recommended position: 

1. Left-hand side of case 

2. 3"– 5" from front of case 

• For 3 drawer applications 

simply “lock” one of the arms 

on anti-tip snapper to cabinet 

side panel using a screw 

through hole in arm. 

Width required between 

case and drawer side 

must = 1/2" 



526


Accessories 

L Lockbar, for use with any central locking 

assembly from the cylinder module system. 

Lockbar groove is 11/16” wide x 5/32” deep. 

J Arresting pins 

Hexagonal section, for installation in lockbar L , using 

combination tool, at any desired position. 

K 



Bar Retaining Bracket, with guide lug 

527 

Pan Head 

#6 

66 

(2 5/8”) 

55 

32 

3.5 (1/8”) 

16.5 

(11/16”) 

Length 

16.5 

ø7 

11 

(7/16”) 

1 

1.5 



Length zinc-plated 

457 mm (18") 234.87.818 

609 mm (24") 234.87.827 

915 mm (36") 234.87.836 

1220 mm (48") 234.87.845 


Material: Pin: steel 

Wing screw and lock washer: steel 

Length nickel-plated/black Packing 

9.5 mm (3/8”) 237.22.714 100 pcs. 

13 mm (1/2”) 237.22.723 100 pcs. 

16 mm (5/8”) 237.22.732 100 pcs. 

19 mm (3/4”) 237.22.741 500 pcs. 

22 mm (7/8”) 237.22.750 100 pcs. 

25 mm (1”) 237.22.769 100 pcs. 

32 mm (1 1/4”) 237.22.778 100 pcs. 

38 mm (1 1/2”) 237.22.787 100 pcs. 

51 mm (2”) 237.22.796 100 pcs. 





Combination Tool 

To install arresting pins J in lockbar L . 

In addition to the hexagon head, the tool incorporates 

a notched sleeve which engages the square lug in the 

cylinder housing, enabling any lock in the module 

system to be operated before the cylinder core is 

installed. 

Material: hardened steel, nickel-plated 

Handle: plastic, clear/red 

Cat. No. 

006.36.653 


Special-purpose drill bit - Ø 16.5 mm 

Suitable for any cylinder housing in the 

system. Can also be used in clockwise 

multi-spindle drilling machines with 

10 mm chuck. 

Material: Shank: steel 

Bit: carbide-tipped 

Cat. No. 

001.24.194 







Accessories 


fits central locking system locks C , D and E 

to order, see specifications at right 

MM Adjustable Shaft Kit 

Can be used to fabricate any size shaft from 24” to 44” by 

simply cutting the square shaft to the desired length. 

Incudes: 

2 - extended shaft clips 

2 - square shafts - 12” ea 

1 - flexible shaft - 20” ea. 

2 - shaft connectors 

1 - hex key for installation 

N Shaft Clip 

Fits flexible shaft M above, holds shaft to cabinet. 

Q 

L 

12" 

Drawer Locking Wedge 

12" 


X 

Square 

Shafting (2) 

20 

31 

10 12.5 

20" 

35 mm (min.) 

100 mm (max.) 

Eje flexible 

Clip para eje extendido (2) 

To order flexible shaft 

Eje cuadrado (2) 

Dim A - Specify position of inner 

Dim A square - Specify (if not position centered) of inner square (if not centred) 

L 

Specify length L required = internal cabinet width 

To order flexible shaft 

Dim A - Specify position of inner 

square (if not centered) 

A 

L 

Specify length L required = internal cabinet width 

5.2 

12 

15 

2 

A 

20" 

Extended 

Shaft Clip (2) 

To order flexible shaft: 

Conector de eje (2) 

1. Specify lock body model: 

C , D or E 

2. Dimension L, inside cabinet width 





zinc-plated 237.44.10X 


Discontinued 


12" 

Shaft 

Connector (2) 

12" 

Material: steel, zinc-plated, plastic 

Colour Cat.No. 

black 237.60.010 


Pan Head 

#8 



natural 237.44.014 


Pan Head 

#8 



black 234.91.090 




528

Accessories 


Strike Plate, screw-mounted, belt loop type 

Strike Plate, screw-mounted 

Strike plate, for behind door 

Angle Strike 90º angle, screw-mounted 

Strike Plate, for lever lock cylinders 



529 

19 

11.5 

Strike Plate, with offset slot, for hook lever lock cylinder 

5.5 

4.2 

22 

6 6 

11 

22 

11.5 

22 

26 

49 

19 

49 

4.2 

6 

4.2 

32 

12.5 

10 

4.2 

4.2 dia. 

hole thru 

(2 places) 

8 

11 

11 

1.5 

1.5 

Pan Head 

#8 

22 

11.40 

8 1.4 




black 239.61.337 




black 239.61.328 




black 239.61.350 




black 239.61.319 




black 239.08.705 




black 239.08.723 







FH Series 

Cam Locks, for vertical door mounting 

5 plate levers = 200 key changes 

Cylinder Rosettes, ordered separately 

Key blanks, for FH series 


2 

2 

15 

Ø 24 

30 

18 

Ø 18 

Ø 19 

42 

2 

32 

22.5 

1.5 


Material: Mounting plate: zinc die-cast 

Lever: steel, zinc-plated 

Cylinder: zinc die-cast 




matt nickel-plated 

90º [235.04.609] 

90º [235.04.654] 

Keyed alike: Key Change FH 1 


90º [235.04.814] 

90º [235.04.912] 

Packing: 10 pcs. (includes 2 keys) 

Flat Head 

#8 

Discontinued 

Discontinued 


matt nickel-plated 219.19.676 








530


FH Series 

Deadbolt Lock, with ø 18 mm cylinder. For left hand use. 

5 plate levers = 200 key changes. 

Backset = 26 mm 

Closure travel: 180° 



531 

Closure 

travel 

unlocked 

locked 

40 

8 

22 

15.5 

40 

Ø 18 

Deadbolt Lock, with ø 18 mm cylinder. For right hand use. 




Deadbolt Lock, with ø 18 mm cylinder. For drawer use. 




20 

8.5 

Spacer Plate, install between lock and door to prevent the 

cylinder from projecting excessively through the door. 


Flat Head 

#6 

40 

40 

2.5 

26 

15.5 


light grey 232.03.992 


20 

26 

8.5 26 15.5 

4 

2.5 

40 

Ø 18 

Ø 18 

2.5 

40 

8 

22 

40 

20 

2.5 

8.5 

4 

4 

2.5 

22 

Closure 

travel 

unlocked 

locked 

Closure 

travel 

unlocked 

locked 

Flat Head 

#6 

Flat Head 

#6 



Cat. No. 

Colour Keyed different Keyed alike - FH1 

matt nickel-plated [232.04.613] [232.04.668] 

chrome-plated [232.04.211] [232.04.266] 


Discontinued 


Cylinder Rosettes, 

ordered separately. 


Ø 24 

Ø 19 



1.5 

Cat. No. 



chrome-plated [232.04.202] [232.04.257] 



Cat. No. 



chrome-plated [232.04.220] [232.04.275] 


Discontinued 



Discontinued 


polished brass [219.19.871] nickel-plated 209.99.008 

chrome-plated 219.19.276 Packing: 1 pc. 

Packing: 10 pcs. Discontinued 

Raised flat head screws pages 309–310 


inge 



FH Series 

RONDELL, inlaid flap locks with cylinder 

With key trap (key removable only when locked) 



Advantages of RONDELL locks: 

The inside of the drop-leaf or door 

remains completely flat. With the 

flap open, the lock and catch lie 

within the panel, with no projecting 

parts. The key trap presents 

an additional advantage. Since the 

key can only be withdrawn when 

the flap is locked shut… 

Flap hinge 

…it cannot fall out when the flap 

is lowered. 

Flap open 

Flap open 

Angled 

strike 

Angled 

strike 

Flap 

closed 

Flat Head 

#6 

Flap 

closed 


4.5 

Flap open 

16 

3 

9 

Dimension a 20 

.35 

20 

Ø 18 

Flat Head 

#6 

Angled 

strike 

40 

22 

2.5 

17.5 

5.5 

2.5 

3.5 

23 

Cylinder Rosettes, 

ordered separately 

Ø 24 


Flap Ø 25 

closed 

Ø19 


Ø19 

Ø20 

1.5 

Colour Cat No. 



1.5 


MINI-LOCK 40, inlaid locks with cylinder 



Closure travel: 180˚ 


Material: Case: zinc die-cast and steel 

Backplate: matt 

Cylinder: zinc-alloy, matt nickel-plated 

Cat. No. 

left 230.12.704 

right 230.12.606 

drawer 230.12.704 

Packing: 10 pcs. (includes 2 keys) Discontinued 


Cat. No. 

left 230.12.713 

right 230.12.615 

drawer 230.12.811 

Packing: 10 pcs. (includes 2 keys) Discontinued 





Keyed alike: Key change FH1 

Discontinued 




Discontinued 

Install between the lock and inside of 

the door to prevent the lock from 

projecting excessively from the door. 

40 

2.5 

For 230.12. series 



nickel-plated 


230.13.998 

For 219.27. series 



light grey 


230.07.990 



532

Tambour and Sliding Door Locks 

FH Series 

Tambour Door Rim Lock, with cylinder 



Cerraduras para wmbutir 

Tambour door locks 

Cerraduras para wmbutir 



533 

7.5 

1.5 

22 28 

7.5 

ø18 

75 

75 

13.5 

26 

15.5 

4 

Ø7 

17 13 27 

60 

22 

2.5 

Ø18 

21 

15 

230.07.605 

8 

2 

40 

22.5 

2.5 

2.5 

...también se puede utilizar para 

puertas corredizas ligeras. 

Lightweight ...también sliding doors se puede utilizar para 

puertas corredizas ligeras. Cylinder Rosettes, 

ordered separately 

40 

2.5 

13 

12.5 

22 

13 

17.5 

* The backset dimension is reduced by 

3 mm on the drawer version. 

Roller shutter locks ... can also be used for lightweight sliding doors 

40 

2 

Flat Head 

#6 

9 

14 

Flat Head 

#5 

Flat Head 

#6 


Lock Case for Tambour Door 

Material: Face plate: brass-plated 

Body: steel 

left 

Cat. No. 

230.37.256 

right drawer* 230.37.301 


Discontinued 

Cylinder For Tambour Door Lock Case 



Closure travel: 1800 Keyed different 

Material: zinc die-cast, matt nickel-plated 

Cat. No. 

230.22.602 

Discontinued 


Cat. No. 

230.22.611 

Packing: 1 pc. (includes 2 keys) Discontinued 

Material: Case: zinc die-cast, matt nickel-plated 

Strike plate: steel, zinc-plated 

Cylinder: zinc die cast, matt nickel-plated 


Cat. No. 

232.07.605 

Discontinued 


Cat. No. 

232.07.614 

Packing: 10 pcs. (includes 2 keys and 1 strike plate) 

Discontinued 

Spacer Plate 

Install between lock and door to prevent the 

cylinder from projecting excessively through the door. 





Ø 24 

Ø 19 





Call 1-800-423-3531 from anywhere Ø 20 in Canada - www.hafele.com 

1.5 




nickel-plated 


209.99.008 


Flat Ø 25 head screws 1.5 

pages 302–304 



Pushbutton Lock/Central Locking System 

FH Series 

Pushbutton Lock, 18 mm diameter 

Function: Close, by pressing the cylinder 

Open, only with key 

Locking pin with M5 internal thread 


Locking socket, ordered separately 

Cylinder Rosettes, ordered separately 


Flat Head 

#6 

32 

1,5 

M5 

37 

18 

ø7 

ø18 

42 

12 

25 

1 

Ø 13.7 

Ø 24 


Ø 9 

Ø 19 

10.7 

1.5 








gold plated 234.50.800 






gold plated 234.50.801 













Accessories for Central Locking Systems, which 

are not included such as, Bar Guides, Arresting Pins, 

Drawer Catches, etc., can be found on page 545. 



534

Central Locking System 

FH Series 

Side Mount Central Locking System With Lockbar, ø 18 42 mm 

Key travel: 180º 

5.5 


Guia 

de varilla 

Púa de 

retenci´n 



535 

Bar 

guide 

Arresting 

pin 

Bar length 

Largo 

Ø 6 

17 

18 

Vista frontal 

38 

16 

32 

40 

Travel 9 

Entrada 9 

38 3 

Bar 

guide* 

22 

2 

6 22 

3 

44 

Vista lateral 

Arresting 

pin* 

Ø 18 

Cylinder Rosette, ordered 

separately 


Front Mount Central Locking Cylinder, ø 18 mm 

Key travel - 180º 

Púa de 

Lifting pin travel - 180º 

Front 

retenxión 

view 


18 

5.5 

42 

Guia 

de varilla 

40 

22 

Ø 18 


Material: Mounting plate: zinc die-cast 


32 

Flat Head 

#5 

Colour 


Cat. No. 

234.77.705 

16 

38 

2 

6 

3 

22 


Ø 6 


17 

Ø 18 


stroke 44 

Side view 

Packing: 1 pc. (includes 2 keys) 

15 

15 

Ø 6 

Ø 6 

Ø 6 

Ø 6 

26 

Length 

38 3 

26 

Largo 

16 

16 

Ø 18 

Flat Head 

#5 


600 mm bar length 

Material: Case and backplate: zinc die-cast and steel 

Bar: aluminum, unfinished 





600 mm bar length 




237.30.716 

Central Locking Bars, can be cut to length 

Material: aluminum, unfinished 

Length Cat. No. 

600 mm (23 5/8”) 237.10.002 

800 mm (31 1/2”) 237.10.004 

1000 mm (39 3/8”) 237.10.006 

1500 mm (56”) 237.10.009 


Discontinued 

24 7.6 






17.4 

Key blanks, for FH 1 series 

Cat. No. 

209.99.008 


Accessories for Central 

Locking Systems, which are 

not included such as, Bar Guides, 

Arresting Pins, Drawer Catches, 

etc., can be found on page 545. 

2 




FH Series 

For installation in cabinet side panels from 19 mm thick 

The entire assembly is recessed into the cabinet side panel 

Ideally suited for installation in side panel next to inset drawers 

Front Mount in Side Panel Cylinder, ø13mm 

Key travel - 180º 

Lifting pin travel - 180º 


Central Locking Bars, for above lock 

Can be cut to length 

• Accessories for central 

locking systems, which are 

not included, such as, Bar 

Guides, Arresting Pins and 

Drawer Catches, etc. can be 

found on page 545 

Ø4.4 

Stroke 8.5 

12.5 

Length 

23 

Front view 

Side view 

16 

15 

34.5 

Drilling diagram 

20 

Ø38 

(1 1/2") 

34 

11.5 

21 

32 

13 

4.5 

Ø13 

10 

Ø13 

(1/2") 

3 

Retaining spring 

3 

Ø5 

Arresting pin 

Bar 

guide 



Different key changes 



matt nickel-plated [234.76.600] 

Discontinued 



matt nickel-plated [234.76.619] 

Packing: 10 pcs. (1 pc.= 2 keys and 1 retaining spring) 

Discontinued 


Length unfinished 

500 mm (19 5/8") [237.09.515] 

800 mm (31 1/2") [237.09.551] 


Discontinued 



536


H Series 

Cam Lock, with cylinder, for vertical mounting 

Closure travel 90º with key trap 

(Key can only be removed in the locked position) 

5 pin levers = 10,000 key changes 

Inlaid Lock 



537 

Flat Head 

#8 

21 

3 

1.5 

35 

19 

3 

50 

Ø 19 

Ø 20 

Ø 25 

1.5 

36.5 

23.5 

1.5 

Key blanks, for H series 




available upon request 

• Please include a key plan 

• Please contact Häfele for current delivery time 

to produce 

*Closure orientation is achieved by repositioning the bolt. 

Cat. No. 

209.99.044 

H Series Inlay Lock with Cylinder 

5 pin levers = 20,000 key changes. 


Closure travel: 3600 16 

40 


Material: Case: zinc die-cast, matt nickel-plated 

10 20 

Cylinder: brass, matt nickel-plated 


5 

left 230.19.614 1 pc. 

3 

24 

right 230.19.605 1 pc. 

Flat Head 

#6 

Ø22 

Ø23 

Ø28 

1.5 


Material: Mounting plate: steel 

Nuts and lever: steel, zinc-plated 

Cylinder: brass 



Keyed alike: Key Change H1 



Packing: 10 pcs. (includes 2 keys, 1 cylinder rosette, 

1 cam and 2 nuts) 

drawer 230.19.623 10 pcs. 

(1 pc. = 2 keys and 1 cylinder rosette) 

Keyed Alike: Key Change H1 


left 230.19.810 1 pc. 

right 230.19.712 1 pc. 

drawer 230.19.918 10 pcs. 

(1 pc. = 2 keys and 1 cylinder rosette) 

Install between the lock and inside of the door to prevent 

the lock from projecting excessively through the door. 

Spacers 







40 

2.5 



Tambour Door Lock 

H Series 


H Series 

Accessories for Central Locking Systems, which are not included 

such as, Bar Guides, Arresting Pins, Drawer Catches, etc., can be 

found on page 545 


7.5 

1.5 

22 28 

1.5 

M5 

36 

75 

1.5 

17 13 27 

75 

21 

12.5 

**22 

26 

13 

9 

12 28 

17.5 

ø18 

13 

20 

*The backset dimension is reduced by 

3 mm on the Ø18drawer 

version. 

Ø19 

Ø24 

75 

22 

Ø7 

ø7 

ø22 

Ø23 

Ø28 

1.5 

50 

12 

24 

1.5 

13 

22 

2.5 

230.37.256 & .23.805 

1.5 

2.5 

13 

12.5 

14 

Lock Case for Tambour Door 

Material: Face plate: brass-plated 

Body: steel 

Pushbutton Lock, ø 22 mm 

Function: Closing, by pressing the cylinder 

Opening, only with key 

Locking pin with M5 inside thread 


Material: Case: zinc die-cast 


Locking Socket, ordered separately 

Ø 13.7 






Ø 9 

10.7 


Flat Head 

#5 

Cat. No. 

left 230.37.256 

right/drawer* 230.37.201 


Cylinder For Roller Shutter Mortise Lock Case 



Closure travel: 180 

Cat. No. 

Keyed different 230.23.805 

Keyed alike: Key change H1 230.23.814 

Packing: 1 pc. (2 keys, 1 cylinder rosette) 

0 

Discontinued 

Flat Head 

#5 




Packing: 1 pc. (2 keys, 1 cylinder rosette) 



538


H Series 

Central Locking Cylinder, ø 22 mm 

Closure travel 360º 

Lifting travel 180º 


Púa Púa arriba arriba Púa Púa abajo abajo 



539 

Flat Head 

#5 

Arresting Arresting 

pin* pin* 

Bar Bar 

guide* guide* 

Accessories for Central Locking Systems, which are not 

included such as, Bar Guides, Arresting Pins, Drawer Catches, 

etc., can be found on page 545 

Ø 6 

Cerrado Cerrado Abierto Abierto 

17 

Ø 6 

22 

22 

17Ø 

6 

44 

43 

36 

Front view 

1.5 

22 

36.5 

Side view 

44 

1.5 

Ø 23 Ø 28 

Rosette 

38 3 

43 

Ø 6 26 

36 

Vista frontal 

1.5 

22 

Ø 22 

16Ø 

22 

Up pin Up postion pin postion 

36.5 

Down Down pin postion pin 15 postion 

Vista lateral 

1.5 

Ø 6 26 

Locked Locked Unlocked Unlocked 

Ø 23 

Roseta 

Ø 28 

15 

Ø 6 

Length 

38 3 

Largo 

16 






to produce 

Material: Mounting plate: steel 





Packing: 1 pc. (includes 2 keys and 1 cylinder) 

Central Locking Bars 


Length unfinished 

600 mm (23 5/8”) 237.10.002 

800 mm (31 1/2”) 237.10.004 

1000 mm (39 3/8”) 237.10.006 

1500 mm (56”) 237.10.009 


Discontinued 


Cat. No. 

209.99.044 






Spring Bolt Locks 

H Series 

Flat Head 

#6 

The spring rim lock is available as a mini-bar lock with a telltale window above the cylinder 

casing. This version is particularly suitable for use on mini-bars in hotel rooms. When the 

bar is initially unlocked by hotel guest, the red telltale appears above the cylinder, indicating 

to the room service staff that the guest has probably removed a drink or snack which must 

be replaced and billed. 

Flat Head 

#6 





to produce 


7 35 

8 20 

6 

8 

13 

8 

13 

8 

20 

ø18 

35 

Ø30 

75 

64 

16 

21 

75 

64 

16 

20 

initially unlocked, the red dis 

in the telltale window 





Spring Bolt Lock, with 18 mm diameter cylinder 



Material: Case: plastic 

Cylinder: brass, nickel-plated matt 

Cat. No. 

Keyed different left right 

white 231.15.700 231.15.600 

brown 231.15.100 231.15.000 

Keyed alike: Cat. No. 

Key change H1 left right 

white 231.15.701 231.15.601 

brown 231.15.101 231.15.001 

Packing: 1 pc. (includes 2 keys and 1 cylinder rosette) 

Mini-Bar Spring Bolt Lock, with telltale and reset feature 

5 pin levers = 20,000 key changes. 


Material: Case: plastic, brown 

Cylinder: brass, nickel-plated matt 

Keyed alike: Key change H1 Cat. No. 

right [231.10.001] 


Telltale Reset Key 


Cat. No. 

[231.10.095] 

Discontinued 

Cat. No. 

209.99.044 



540


1 1/8" 

1/8" 



541 

RH 

Door 

LH 

Door 

1 1/4" 1 1/4" 

• Through the use of a shifter, the 

360º key travel turns the cam 90º 

in either direction. Actual application 

determines which cam position is 

the locked position. Each lock is 

furnished with an alternate cam for 

opposite cam turn. 

Applications: 

solid lines show 

locked position of 

cam 

R/H Drawer 

Applications: 

solid lines show 

locked position of 

cam 

L/H Drawer 

Position 

of 

shifter 

on back 

of lock 



High Security 


• Locks on this page meet or exceed ANSI/BHMA Grade 1 cylinder pull and cycle test 

• Approved by the WIC - Woodworkers Institute of California 



to produce 

3/8" L 

5/8" 

3/8" 

32 


(1 1/4") 

For drawer, left, or right hand applications 

4 pin tumblers = 850Ø key 24 changes 

Cam turns 90º, key turns 360º 


3/4" 3/4" 

Mounting Hole 

Material: 

Flush Lipped/Overlay 

Colour Mounting Type Material Thickness 

Maximum 

Material Thickness 

Cat. No. 

brushed chrome Flush 1 1/16” 3/4” 235.10.400 

brushed chrome Lipped/overlay 1 3/16” 7/8” 235.10.300 

satin brass Flush 1 1/16” 3/4” 235.10.500 

satin brass Lipped/overlay 1 3/16” 7/8” 235.10.600 

Packing: 10 PCs. (1 pc. = 2 keys, 2 cams (1 left, 1 right), spur washer, and rosette) 

Keyed alike 

• Mounting Type: Flush 

• Cylinder length: 1 1/16”, Maximum material thickness: 3/4” 

Colour Keying #’s Cat. No. 

brushed chrome 101 235.10.401 




satin brass 107 235.10.503 

satin brass 

• Mounting Type: Lipped/Overlay 

915 235.10.504 

• Cylinder length: 1 3/16”, Maximum material thickness: 7/8” 






satin brass 107 235.10.603 

satin brass 915 235.10.604 

Packing: 10 pcs. (1 pc. = 2 keys, 2 cams, (1 left, 1 right), spur washer, and rosette) 

Key Blank 


Mounting Plate for Cam Locks 

Used where spur washer will not embed into hard 

surfaces. 

Measures 2 1/4” x 1 1/4” 



Replacement Keys 


Keying No. 

Cat No. 

210.02.101 

Discontinued 

Cat. No. 

Cat. No. 

101 210.02.201 

2 1/4” x 1 1/4” 210.02.081 

103 210.02.202 


107 210.02.203 

Drawer 

915 


210.02.204 

Position 

of 

shifter 

on back 

of lock 





High Security 

• Locks on this page meet or exceed: ANSI/BHMA Grade 1 cylinder pull and cycle test. 

• Approved by the WIC - Woodworkers Institute of California. 

Cylinder Rosettes, ordered 

separately 


57/64” 7/8" 

Mounting Hole 

Ø 24 


brushed chrome 232.14.000 

satin brass 232.14.001 


5/32" 

7/8" 

Ø19 

3/4" 

1/4" 

1/4" 

1 15/64" 

15/16" 

3/4" 

Cylinder 

length 15/32" 

1.5 

7/8" 

1 21/64" 

1 5/8" 

5/32" 

1 15/64" 

15/16" 

15/32" 

Cylinder 

length 

1 5/8" 

1 21/64" 

• The PLUS feature allows you to 

remove the cylinder from our pin 

tumbler box locks while the lock 

remains in place. No mounting screws 

need to be removed. Simply use a 

5/64" hex wrench from the back to Text 

remove the cylinder for re-keying. Change 







to produce 

Door Locks 

For right or left hand applications 

4 pin tumblers = 850 key changes 

Cylinder length 7/8”, Bolt travel 3/4” 

Surface mounted, requires a 57/64" diam. hole 

Key turns 360º 


Material: Lock and keys: brass-plated 

Strike: brass-plated 


brushed chrome 232.14.400 

satin brass 237.22.214 

Packing: 10 pcs. (1 pc. = 2 keys, strike plate, and screws) 

Keyed alike 






satin brass 107 232.14.503 

satin brass 915 232.14.504 


Drawer Locks 

4 pin tumblers = 850 key changes 

Surface mounted, requires a 57/64" diam. hole. 

Bolt travel 3/4” 

Key turn 360º 


Colour Cylinder Length Cat. No. 

brushed chrome 7/8” 232.14.300 

brushed chrome 1 3/8” 232.14.350 

satin brass 7/8” 232.14.600 

satin brass 1 3/8” 232.14.650 


Keyed alike - Cylinder Length 7/8”, Bolt travel 3/4” 






satin brass 107 232.14.603 

satin brass 915 232.14.604 

Cylinder Length [1 3/8”], Bolt travel 3/4” 






satin brass 107 232.14.653 

satin brass 915 232.14.654 




542


• Easily converted from 90 0 to 180° travel 

• Key is removable in locked and unlocked position. 

• Includes a straight cam 1 1 /4” long 

Key blank 


Finish Cat No. 



Replacement Key #001 

Finish Cat No. 





543 

45 mm 

(1 3/4") 

16 

90° 

11 mm 2 mm 

19.5 Ø 24 

22 mm 

(7/8") 

L 

16 mm 

(5/8") 

30.3 mm 

(1 3/16") 

16 

5/8" 

32 

(1 1/4") 

19.5 

16 

3/4" 

28 

(1 1/8") 

Requires 19 mm ( 3 ⁄4”) 

diameter hole 

• Offset cams increase (out) or 

decrease (in) dim. L by offset 

dimension of cam. 

3/4" 

• Example: 

If dim. L = 30 mm and 6 mm 

offset cam is selected, then 

“in” = 24 mm and “out” = 36 mm 

Ø 24 

25 mm 

(1") 

37 mm 

(1 1/2") 

16 mm 

(5/8") 

• Master keying systems are not available 

• Keyed alike, key # 001 

• Keyed different, key #’s 001-100 

19.5 19.5 

19 mm 

(3/4") 

Rosette 

L 

5.5 mm 

(1/4") 

1 mm 

19.5 19.5 

Ø Ø 24 24 

Travel 

32 

(1 1/4") 

L L 


Cam Locks, for wood, metal, or plastic, 

with straight cam 32 mm (11 ⁄4”) long. 

5 Plate levers 

Key travel: 90° or 180° 

For 16 mm ( 5 Material: zinc die-cast, plated 


⁄8”) material, Dim. L = 25 mm (1”) 

Cat. No. 

Finish Keyed Different Keyed Alike 

chrome-plated 235.12.200 235.12.221 

bright 28 28 

brass 

(1 1/8") (1 1/8") 235.12.800 235.12.821 

black polished 235.12.300 235.12.321 

Packing: 100 pcs. 20 pcs. 

(1 pc. = 2 keys, prong washer, hex nut, rosette, 90° 

and 180° stop washers) 

Discontinued 

For 19 mm ( 3 ⁄4”) material, Dim. L = 30 mm (11 ⁄8”) 

Cat. No. 

Finish Keyed Different Keyed Alike 

chrome-plated 235.12.220 235.12.241 

bright brass 235.12.820 235.12.841 





Discontinued 

For 25 mm (1”) material, Dim. L = 35 mm (13 ⁄8”) 


Material Keyed Different Keyed Alike 

chrome-plated 235.12.240 235.12.261 

bright brass 235.12.840 235.12.861 





Discontinued 

Offset cams, order separately (replace straight cams) 

Material: steel, yellow chromate 

Offset Cat. No. 

3 mm ( 1 ⁄8”) 219.13.910 

6 mm ( 1 ⁄4”) 219.13.930 

9 mm ( 3 32 32 

(1 (1 1/4") 1/4") 

⁄8”) 219.13.950 


Glass door lock, for 1/8” - 3/8” thick glass 

Key travel: 90° 

Material: zinc, die-cast, chrome-plated 

Cam and strike plate: yellow chromate 

Back plate: zinc, bright 


Keyed Different 233.11.200 100 pcs. 

Keyed Alike 233.11.201 20 pcs. 

(1 pc. = 2 keys, hex nut, back plate and strike plate) 

Discontinued 



15 

/16”) 



• Key turn is 90 degrees 

• Key is removable in locked and unlocked position 

• Master keying or key plans are not available 

• Keyed alike 

• Keyed different, 168 possibilities 

• Key changes randomly selected for keyed different option 

5 5 

(3/16”) (3/16”) 

Ø24 Ø24 16 16 

(1”) (1”) (5/8”) 

(5/8”) 

3 3 

(1/8”) (1/8”) 

2 2 

(1/16”) (1/16”) 

48 48 

(1 7/8”) (1 7/8”) 

15 15 

(9/16”) (9/16”) 

40 40 

(1 5/8”) (1 5/8”) 

16 

(5/8”) 

Ø19 

(3/4”) 


15 

(9/16”) 


Cam Locks, 16 mm (5/8”), Dim.L=25 mm (1”) 

• Includes a straight cam 1 9/16” long 

• 5 plate levers 

Material: zinc alloy; Finish: chrome-plated 

Item No. 

keyed different 235.20.200 

keyed alike 235.20.201 

*Packing: 35 pcs. (2 keys, 1 hexagon nut, cam plate 

and washer) 

Cam Locks, 19 mm (3/4”), Dim.L=30 mm (1 1/8”) 

• Includes a straight cam 1 9/16” long 

• 5 plate levers 

Material: zinc alloy; Finish: chrome-plated 

Item No. 



*Packing: 30 pcs. (2 keys, 1 hexagon nut, cam plate 

and washer) 

Offset Cams, order separately (replace straight cams) 

Material: steel; Finish: yellow chromate 

Offset Item No. 

3 mm (1/8”) 219.13.910 

6 mm (1/4”) 219.13.930 

9 mm (3/8”) 219.13.950 

*Packing: 20 pcs. 



543A 

Ø24 

(1”) 

16 

(5/8”) 

5 

(3/16”)


• Economical drawer locks 

• Key is removable in locked and unlocked position 

• Master keying systems or key plans are not available 

• Keyed alike 

• Keyed different, 168 possibilities 

• Key changes randomly selected for keyed different option 



543B 

1 

(1/32”) 

Ø22 

(7/8”) 

4.5 

(3/16”) 

36 

(1 7/16”) 

52 

(2 1/16”) 

15 

(9/16”) 

16 

(5/8”) 

25 

(1”) 

15.7 

(5/8”) 

15 

(9/16”) 

39 

(1 9/16”) 

2 

(1/16”) 

Ø18 

(11/16”) 

Ø3.8 

(1/8”) 

Ø22 

(7/8”) 

27 

(1 1/16”) 

24 

(1”) 

47 

(1 7/8”) 

11 

(7/16”) 

5 

(3/16”) 

27 

(1 1/16”) 

46 

(1 13/16”) 

36 

(1 7/16”) 

9 

(3/8”) 

38 

(1 1/2”) 

32 

(1 1/4”) 

1 

(1/32”) 

57 

(2 1/4”) 


Drawer locks, for wood drawers 

• For 19 mm (3/4”) material 

• 5 Plate levers 

• Throw: 9 mm (3/8”) 

• 180 degree key rotation 

Material: zinc alloy; Finish: nickel-plated 

Item No. 



*Packing: 25 pcs. (includes 2 keys and 1 rosette) 

5.5 

(1/4) 

(2 places) 

35 

(1 3/8”) 

1.5 

(1/16”) 

Spacer 

Place between lock and inside of 

drawer to control how much lock 

protrudes through face. 

Material: cardboard 

Item No. 

210.02.082 


47 

(1 7/8”) 

15 

Glass Door Lock, (9/16”) for single door 

• For 3/16 –1/4” 39thick 

glass 

(1 9/16”) 

32 

Material: zinc alloy; Finish: chrome-plated (1 1/4”) 

Item No. 


27 


15 

(1 1/16”) 

*Packing: (9/16”) 25 pcs. (includes 2 keys, 1 steel front plate, 

1 plastic washer, 1 hexagon nut, 

1 straight cam and 1 steel strike) 

1 

(1/32”) 

Ø22 

(7/8”) 

4.5 

(3/16”) 

16 

(5/8”) 

25 

(1”) 

2 

(1/16”) 

Ø18 

(11/16”) 

40 

(1 5/8”) 

27 

(1 1/16”) 

Ø3.8 

(1/8”) 

30 

(1 3/16”) 

11 

(7/16”) 

46 

(1 13/16”) 

Ø18 

(11/16”) 

1 

(1/32”) 

57 

(2 1/4”) 




Drawer Locks 

• Economical drawer locks 

• Key is removable in locked and unlocked position. 

• Master keying systems are not available. 

• Keyed alike, key # 001 

• Keyed different, key #’s 001-100 

36mm 36mm 

35mm 35mm 

5.5mm 5.5mm 

(2 (2 places) places) 

1.5mm 1.5mm 

36 

(1 3/8") 

Rosette 

Spacer 

Place between lock and inside of 

drawer to control how much lock 

protrudes through face. 

Material: cardboard 



28 

(1 1/8") 

28 

(1 1/8") 

22 

(7/8") 

Cat. No. 

210.02.082 

L 

Replacement Key #001 






For 32 mm (1 

Key blank 



nickel-plated 


209.99.700 

1 ⁄4”) material 

Backset = 19 mm ( 3 ⁄4”) 

Dim. L = 35 mm (1 3 For 25 mm (1”) material 

Backset = 19 mm ( 

⁄8”) 



Cat. No. 

Colour Keyed Different Keyed Alike 

chrome-plated 235.14.240 235.14.261 

bright brass 235.14.840 235.14.861 



(includes 2 keys and 1 rosette) 

3 ⁄4”) 

Dim. L = 29 mm (1 1 For 19 mm ( 

⁄8”) 



Cat. No. 


chrome-plated 235.14.210 235.14.231 

bright brass 235.14.810 235.14.831 




3 ⁄4”) material 

Backset = 19 mm ( 3 ⁄4”) 

Dim. L = 22 mm ( 7 Drawer Locks, for wood drawers 

5 Plate levers 

Throw: 9 mm ( 

⁄8”) 



Cat. No. 


chrome-plated 235.14.200 235.14.221 




3 9 

(3/8") 

⁄8”) 

180° key rotation 

Flat Head 

#6 

Discontinued 

Discontinued 

Discontinued 



544


Accessories 

The guides and arresting pins are designed for a bar 

section measuring 16 x 3 mm. 

Bar guide, open type 



white 237.23.720 


38 

1 

5.5 

Bar guide, open type 

19 


Cat No. 



19 

Arresting pin, total length = 8 mm 


Cat No. 

237.22.027 

Packing: 100 pcs. (includes 1 slotted set screw and 

1 threaded bolt) 40 

Bars for central locking systems 


Length Cat No. 

600 mm (23 

Mounting arrangement for a 

right hand drawer. 

5 ⁄8”) 234.78.033 

820 mm (321 3 

⁄4”) 234.78.051 


Discontinued 

Guides can be 

used for surfacemounted 

(left) or 

recessed (right) 

bars by reversing 

their position. 



545 

40 

19.6 

Ø7 

16 

16 

1.8 

20 

7 

6 

8 

14 

25.5 

8 

4 1.5 

Drawer catches, screw-mounted 


left 

nickel-plated 

237.16.752 

right 237.16.707 


4. 8 

Flat Head 

#5 

35 

(1 3/8") 

6 

(1/4") 

12 

2 

32 

37 

16 

42 

(1 3/4") 

15 

• Can be used 

32 left or right 

25 

20 

57 

(2 1/4") 

1.4 

3.2 

Arresting Pin 

M4 set screw, 

with 2 mm hex socket 

Extension 

Total Length 


The drawer can be closed even with 

the pin in the locked position (top); 

the drawer is then locked in position 

(bottom). 


19 

6 

19 

Ø7 

6 

Ø7 

Arresting Pin, use with extensions below 




Packing: 100 pcs. (includes 1 slotted set screw) 

Extensions with M4 threads, for arresting pins 


Length zinc-plated 

17 mm 237.22.189 

20 mm 237.22.214 

25 mm 237.22.269 

30 mm 237.22.312 


15 

35 

(1 3/8") 

6 

(1/4") 

32 

37 

12 

16 

32 

25 

20 

57 

(2 1/4") 

Bar guides, 32 mm compatible 

Use as spacer for mounting between epoxy slides 

and cabinet interior (makes recessing of central 

locking bars unnecessary). 



black 237.23.310 

Packing: 100 pcs. (includes 1 slotted set screw) 

Discontinued 

All the central locking systems illustrated on pages 

534 - 539 use accessories with these dimensions. 

2 

42 

(1 3/4") 

1.4 

3.2 

13 

13 

VARIANTA 

5 

Flat Head 

#5 


Varianta screws page 311 



Built-In Central Locking System - Rear Panel 

• Hooks are spring-loaded, the drawer can be kept open as needed and shut later 

• Hooks are adjustable on the locking bar enabling them to be individually adapted to drawers of varying heights 

• Movement of the locking bar is affected by a roller, mounted at the upper end of the bar and actuated by a wedge-shaped driver 

The central locking system is designed to be mounted on the rear panel of 

vertical multi-drawer cabinets. In the locking process, the hooks attached to 

the bar engage the loop catches on the drawers as they descend, locking 

the drawers in position. 

Roller For Vertical Lock Bar 


Cat. No 



Bar Guide 





Spring Hook 





Lock Strike 





Push-button lock must be 

ordered separately. See pages 

534 or 538. 


Pan Head 

#6 

Roller 

Spring 

hook 

Bar 

guide 

40 

Vertical bar 

Rear panel Drawer 

Vertical Lock Bar, 600 mm length 

(with attached spring and bar guide) 


Deadbolt locks must be ordered 

separately. See pages 531 or 542. 

Cat. No. 


Packing: 1 set 

Pushbutton lock 

Roller 

Spring 

hook 

Bar 

guide 

Vertical bar 

Rear panel Drawer 



Horizontal Activator Bar, 600 mm length 

For use with pushbutton locks 


Cat. No. 



Angled Activator 

For use with deadbolt locks 





Deadbolt lock 

40 

12 

6.5 

8.5 

Ø3.5 

Ø13 

M5 

4 

8 

Connecting Piece For 

Push-button Cylinder 600 mm length 


Cat. No. 

234.58.997 


(includes 1 countersunk screw) 



546

Sliding Door Locks 



547 

1.5 

1.5 

40 

50 

32.5 

5 

21 

22 

ø22 

Ø23 

Ø28 

8 

11 

35 

7.5 

24 

18 

1.5 

1.5 

Flat Head 

#6 

7 (5/16") 

Locking 

travel A 

(right) 

9.5 (5/8") 


Push-button/rotary cylinder lock 

A rotary lever provides additional protection against 

“pushing-in” of sliding doors (especially tall doors) 

• with 5 pins levers = 10,000 different 

key changes are possible 

Function: locking - only with a key 

unlocking - only with a key 

Locking travel: 90º A (right) 

Material: Housing: zinc alloy 



Keyed Different 234.52.600 

Keyed Alike: Key Change H 1 234.52.815 

Packing: 1 pc. (includes 2 keys, 1 cylinder rosette and 

1 strike plate) 






Glass Door Cylinder Lock, with plug-in cylinder 

For installation in glass panels from 6-8 mm 

with key trap (key only removable when locked) 

75 key changes 


Accessories: 2 keys, 2 rubber 

washers and 2 mounting screws 

Screws 

Backplate 

Wood Door Cylinder Lock, with plug-in cylinder 

For installation in wood panels from 16-19 mm 

with key trap (key removable only when locked) 

75 key changes 


Rubber washers 

Frontplate 

Backplate 

Mounting diagram 

7.5 

Ø 18 

30 

2 

20 

Frontplate 

Cylinder 

6 - 8 mm 


25 


Material: Housing zinc die-cast, chrome-plated 

Cylinder lock: steel, nickel-plated 


Cat. No. 

[233.22.205] 

Keyed alike 

Discontinued 

Mounting Diagram 

Key Change 

978 

Cat. No. 

[233.22.214] 

Cylinder 901 [233.22.223] 

902 [233.22.232] 

903 [233.22.241] 

904 [233.22.250] 

906 [233.22.269] 


Discontinued 

Wood applications 

Ø 17 

3 

Glass 

thickness 

Ø 7 

2 16 

Material: Housing: zinc die-cast, chrome-plated 

Cylinder lock: steel, nickel-plated 

Cat. No. 

Keyed different Discontinued [234.55.209] 

Keyed alike: Key Change 978 [234.55.218] 

Packing: 20 pcs. (includes 2 keys and 1 rosette) 

20 

Ø 16 

Key and cylinder only 

Suitable for cylinder lock 

with plug-in cylinder, 

for wood and glass 

panel installation. 


Material: nickel-plated 

Cat. No. 

[233.22.009] 


Key and cylinder only 

Material: nickel-plated 

Keyed alike 

Key Change Cat. No. 

978 [233.22.018] 

901 [233.22.027] 

902 [233.22.036] 

903 [233.22.045] 

904 [233.22.054] 

906 [233.22.063] 




548


Glass Door Cylinder Lock 



548 A 

Glass 

Thickness 

3 

(1/8”) 

25 (1”) 

Ø7.5 

(5/16”) 

17 

(11/16”) 

22 

(7/8”) 

2 

(1/16”) 

New 

Item 

16 

(5/8”) 


• With Plug-in Cylinder 

• For installation in glass panels 

for 5-7 mm (3/16”-5/16”) 

• 50 Key Changes 

• Closure travel: 90° 

• No replacement keys available 

Material: Housing: zinc die-cast; Finish: chrome-plated 

Cylinder lock: steel 

Cat. No. 


Keyed alike #851 233.22.217 

Packing: 1 pc. (includes 2 keys, 2 rubber washers 

and 2 mounting screws) 






549 

ø5 

8 

ø23 

24.5 

18 

29 

9 

12 

** 

20 

16 

28.5 

26 

Glass drilling diagram. 

Bore glass before glass 

is tempered. 

125 

105 

Ø20 

43 

9 

2 

28.5 

9 

2 

10 26.5 

32 

11.5 


Glass Door Pin Lock 

• backplate, screw-mounted 

• for glass thickness 4 - 6 mm 

• with 6 plate levers = 1000 Key Changes 



Material: Housing and cylinder: zinc die-cast 



Keyed alike: N 7921 PL 233.05.601 

Packing: 10 pcs. (each pc. includes 2 keys, 2 rubber 

spacers and 2 screws) 

Glass door lock with plate cylinder 

• with clip-on rack 

• for glass thicknesses from 4 - 8 mm 

• cylinder slides on to rack 

• with 5 plates = 100 different 

key changes possible 


Material: Housing and cylinder: zinc alloy 

Rack: steel 



Keyed alike: N 7921 PL locking 233.01.601 


Glass Door Lock - non boring 

• Clamps to glass with two set screws; 

pad is included to protect glass 

• For 6 mm (1/4”) thick glass 

• Bolt travel - 9 mm (3/8”) 

• Key is removable in both locked 

and unlocked position. 

• Closure travel: 180º 

Material: steel, plastic 


black 233.12.600 

Packing: 800 pcs. (each pc. includes 2 keys and 

protective pad) 






Overlay application Inset application 

2.5 

23.5 

26 

26 26 

26 26 

28 

15 

1 

10 

2 

28 

1 

15 

3 

21 

2.5 

26 

42 

20 

26 

Ø22 

26 26 

30 

6 

Ø25.5 

42 

26 

M6 

10 8 

26 

Glass drilling diagram. 

Bore glass before glass is tempered. 

1 

3 

30 

26 

** 

5 5 

30 

Ø25.5 

56 

26 

6 

13 

1 




25 

** Screws: 

M6 x 10 mm for up to 

8 mm glass thickness 

M6 x 12 mm for up to 

10 mm glass thickness 

Strike plate, glass door 

cam lock 

26 

Gap 

Angle strike 

26 

4 min. 


Glass Door Cylinder Cam Locks 

nut-mounted 

for glass thickness 4 - 10 mm** 

Cam rotation 90° with key trap 

with 5 pin levers = 20,000 key changes 

Locked Locked 


Material: Trim caps: zinc die-cast 


Discontinued 

w/ Stock 


A 90° B 90° 

nickel-plated polished [233.33.700] [233.33.710] 

brass-plated polished [233.33.806] [233.33.851] 

Keyed alike: key change H1 


A 90° B 90° 

nickel-plated polished [233.33.701] [233.33.711] 

brass-plated polished [233.33.815] [233.33.860] 

Packing: 1 pc. (includes 2 keys, 1 cam, 3 nuts, 1 

angle strike, steel clamp plate and 1 plastic washer) 

23.5 2.5 

Glass door cam lock 

Locking Travel A shown - 

Closure orientation is achieved 

by re-positioning the cam. 

Strike plate to glass door cam lock 

2 part, screw-mounted 

for glass thickness, 4 - 10 mm** 

allows two doors to be locked with one lock 



nickel-plated polished 233.40.712 


Packing: 1 pc. (includes 2 M6 screws, 2 clamp 

plates and 1 plastic washer) 

Cat. No. 

209.99.044 



550

Espagnolette Locking System 

• A three point locking system designed for tall wardrobe type cabinets 

• Keeps top and bottom of doors secure and aligned 

• Can be used on doors up to 78” tall 

Rod Guide 

Strike 

Plate 

Rod Guide 



551 

Top Catch 

Hook 

Profile Rod 


Profile Rod 

Bottom Catch 

Hook 

Internal cabinet height 

Centre of lock case 

30 



6 

6 

Upper rod length 

20 

20 

Lower rod length 

11 

11 



Espagnolette Locks 

3 

5 

3 

5 

3 

5 

3 

5 

8 

Ø 19 

Ø 24 

Ø 18 

Ø 19 

Ø 24 

Ø 18 

Ø 19 

Ø 24 

Ø 18 

6 

6 14 

1.5 

6 14 

1.5 

23 

6 14 

21 

1.5 

6 14 


42 

15 

15 

15 

15 

8 30 

15 

8 30 

15 

8 30 

15 

7 40 

25 

4.5 

37.5 

37.5 

37.5 

37.5 

64 75 

64 75 

64 75 

64 75 



Lock case for lever bit key, backset 15 mm 

Closure travel: 180 



left right 

nickel-plated 225.56.654 225.56.609 

brass antique [225.56.053] [225.56.003] 

Packing: 10 pcs 

0 

Screw-mounted 

Left or right handed 

Keyed alike 

Discontinued 

w/ Stock 

Lock case with Ø 18 mm cylinder, backset 15 mm 





Discontinued 

w/ Stock 

nickel-plated 


[225.53.653] [225.53.608] 

Keyed alike left right 

Key change FH1 [225.53.911] [225.53.813] 

Packing: 1 pc (includes 2 keys and 1 cylinder rosette) 

Lock case with Ø 18 mm cylinder, backset 15 mm 





nickel-plated 


225.58.658 225.58.603 


key change H1 225.58.916 225.58.818 


Lock case with extended Ø 18 mm cylinder, 

backset 25 mm 

To accommodate furniture knob-handle made to 

your own design. 





nickel-plated 


225.62.661 225.62.616 


key change H1 225.62.910 225.62.812 


Choice of decorative keys on 

page 495. Master keying and General Master key systems 


Please include a key plan 

Contact Häfele for current delivery time to produce 



552

Espagnolette Lock 

Accessories 



553 

Flat Head 

#6 

Flat Head 

#6 

Flat Head 

#6 

5 

6 

26.5 

26.5 

Ø 7.5 

26 

3 

10 

13.5 

13 

15 

21.5 

10 

15 

14.5 

3 


Profile rod, 2000 mm length 

Material: drawn steel 



bronzed 226.01.500 


Top and bottom catch hooks, screw-mounted 

Material: zinc die-cast with plastic guides 



brass-plated [226.30.520] 



Discontinued 

Rod guides, screw-mounted 

Material: zinc die-cast with plastic guides 

Colour Cat. No. Packing 

nickel-plated 239.75.796 20 pcs. 

brass-plated 239.75.501 1 pc. 

brass antique 239.75.104 1 pc. 

Locking bolt, screw-mounted plate, adjustable 




brass-plated [226.57.503] 20 pcs. 

brass antique 226.57.101 200 pcs. 

Discontinued 





Push-button Locks 

4 

27 

5 

7 45 

Backset 25 

Backset 25 

4 

4 11 28 

30 

Profile rod locks come with colour-coordinated catch hooks: 

• matt nickel-plated locks, zinc die-cast 

• white or brown locks, plastic 

13 

39 

7 

64 

78 

20 



Well suited for the recreation or boating industry, these locks operate by push-button, without a key. All push-button locks can be used in wet 

areas. When locked there is no protrusion of the knob. 

Push-Lock featuring push-button 

locking mechanism, used as a 

deadbolt lock for doors or drawers. 

Image 

Change 

• Shim is used in conjunction with rosette for 19 mm 

(3/4”) material 

• For 16 mm (5/8”) material - use 1 pc. shim 

• For 13 mm (1/2”) material - use 2 pcs. stacked together 


Image 

Change 


locking mechanism. 

Flat Head 

#6 

Image 

Change 

Image 

Change 


locking mechanism 

• screw-mounted 

• order push-button knobs and rosettes separately 



nickel-plated, matt [211.63.600] 

white [211.63.700] 

brown [211.63.100] 


Number Change 

Push-Lock featuring push-button locking 

mechanism, profile rod version 

• for 6 mm Ø profile rod 

• for left or right-hand door application 

• 25 mm backset 

• order push-button knobs and rosettes separately 



nickel-plated, matt 225.22.603 

brown 225.22.103 

Packing: 100 pcs. (includes 1 pair of catch hooks) 

25 

Image 

Change 

3.2 

(1/8") 

Shim for push-button locks 

Placed between lock and inside of door. 

Eliminates the need for different rosette heights. 



white 211.60.990 


Discontinued 

64 

45 



554 

78

Push-Button Knobs and Rosettes 

Push-Button Knob, for 13-19 mm (1/2” - 3/4”) door thickness 



555 

9.5 

38 

23 

14 

8 

8 

19 

Rosette, for 13 mm (1/2”), 16 mm (5/8”), or 19 mm (3/4”) door thickness 

For 13 mm ( 1 ⁄2”) Door Thickness 

13 

12.5 

20 

14 

34 

For 16 mm ( 5 ⁄8”)Door Thickness 

14 

5 

16 

5 


Material: plastic, electro-plated 




chrome-plated polished 229.01.270 

black 229.00.652 


Material: plastic, electro-plated 


13 mm ( 1 ⁄2”) 16 mm ( 5 ⁄8”) 19 mm ( 3 ⁄4”) 

nickel-plated matt 229.03.608 229.03.617 229.03.626 100 pcs. 

brass-plated polished 229.03.804 229.03.813 229.03.822 100 pcs. 

chrome-plated polished 229.03.220 100 pcs. 

white 229.02.709 229.02.718 229.02.727 100 pcs. 

black 229.02.650 229.02.665 229.02.670 10 pcs. 


26 

12 

32 

For 19 mm ( 3 ⁄4”)Door Thickness 

2 

14 

19 

2 

Discontinued 



Push-button Knobs and Rosettes 

Solid Brass 

• Meets 96 hour salt spray test 

• Proper protection should be placed over rosettes before pounding in to prevent marring 

• Oval rosettes include alignment pin to keep rosette from twisting 

Push-button knob, for 13 - 19 mm (1/2” - 3/4”) door thickness 

Brass 

Rosette, round, for 13 mm (1/2”), 16 mm (5/8”), or 19 (3/4”) door thickness 

9.5 

38 

8 

23 

19 

12.5 


34 

5 

12 

32 


Push-Button 

Material: brass, plated, lacquered 



chrome polished 229.10.220 


black nickel 229.10.620 

brass satin 


229.10.520 



13 mm ( 1 ⁄2”) 16 mm ( 5 ⁄8”) 19 mm ( 3 ⁄4”) 

brass polished 229.11.810 229.11.815 229.11.820 

chrome polished 229.11.210 229.11.215 229.11.220 

nickel-plated, matt 229.11.310 229.11.320 

black nickel 229.11.610 229.11.615 

brass satin 229.11.510 229.11.515 


Discontinued 

Rosette, oval, for 19 mm (3/4”) door thickness 

For 16 mm (5/8”), or 13 mm (1/2”) material, use shim found on page 554. 

Brass 

12.5 

Alignment 

Pin 

2 

34 

45 

Brass 




chrome polished 229.11.240 


black nickel 229.11.640 

brass satin 229.11.540 


Discontinued 

2 



556

Push-Button Mini, Knobs and Rosettes 



557 

Push-button Mini 

Rosette Mini 

19 

5.5 

5 

9 

35 

Backset 15 

16 

24.5 

16 

1.7 

36 

48 

24 

1.8 

20 

Flat Head 

#6 


Push-Lock Mini with push-button locking 

• applicable for left or right hand 

• backset: 15 mm 




Packing: 100 pcs. (order knobs and rosettes 

separately, see below) 


20 

For 16 mm (5/8") material only 


nickel-plated, matt 

push-button 229.07.606 

rosette 229.09.600 

Packing 100 pcs. 




Magnetic Lock 

SAFE FIX 

• For all types of doors 16-24 mm thick, particularly suitable as child protection 

• The SAFE FIX magnet opener unlocks the bolt so that the door can be opened 

• The door catch consists of rim lock counterpiece and pin extension 

• Screw mounted 

40 

28 

11 

Counterpiece 

2 

30 

4 

32 

Spring rim lock 

10 

25 

37 

3.3 

Pin extension 


6 

Magnetic opener 

25 

Function 


8 

3–4 

19 

Ø7 

SAFE FIX 

Magnetic opener 

20 


Pan Head 

#5 


Counterpiece and magnetic opener: steel 

nickel-plated, white 

Door catch 245.41.791 

SAFE FIX magnet opener 245.41.791 

SAFE FIX magnet opener 245.41.799 

Packing: 1 pc Number Change 



558

Combination Locks 

The combination lock where 3 dials replace the need for keys. Private containers are secure 

with your own personal code. The code can be changed and reset. Available in 

horizontal or vertical orientation, with or without key override function. 

Straight 

cam 

24 

(15/16") 

13 to 19 

(1/2" to 3/4") 

R12 

24 

(15/16") 

Back Plate Adapter 

Used for installation in metal, glass, or plastic 

For thicknesses 1 mm (3/64") – 9 mm (3/8") 

Material: glass fiber reinforced polyamide 

Colour Cat. No 

black 231.16.399 




559 

44 

(1 3/4") 

33 

(1 5/16") 

Lock body 

63.5 

(2 1/2") 

= Cut-out dimensions 

Horizontal – Right hand 

side of panel 

R2 

R0.5 

4 

(5/32") 

6 (1/4") 

4.7 

(3/16") 

2.5 

(1/8") 

20 

(13/16") 

Combi-Code Lock 1157, with code scrambling feature. 

For installation in wood thicknesses from 13 mm (1/2") 

to 19 mm (3/4") 

Cam travel is 180º, and can be re-oriented. 

Material: Body, knob, and back: glass fiber 

reinforced polyamide 

Cam: steel, galvanized 

Orientation black 

horizontal – right 231.16.300 

horizontal – left 231.16.301 

vertical 231.16.302 

Packing: 1 pc. (includes 1 straight cam with snap ring 

for attaching cam, 1 back plate, 2 affixing 

screws, and installation instructions) 

Horizontal – Left hand 

side of panel 

Vertical applications 

72.5 

(2 7/8") 

28 

(1 1/8") 


Code Scrambling Feature: 

After opening or closing the lock, the dials 

automatically scramble – no one can see the code. 

Code Scrambling with Key Override: 

After opening or closing the lock, the dials 

automatically scramble hiding the secret code. 

The overriding key opens the lock without having 

to know the code (if the code is forgotten). For 

instance, service people can open the locker to 

exchange towels, yet the code remains secret. 

• Each lock comes with instructions explaining how 

to set personal code. 

• For thin materials such as metal, glass, etc. please 

see back plate adapter below. 

Horizontal – Right hand 

side of panel 

Vertical applications 

20 

(13/16") 

Horizontal – Left hand 

side of panel 

72.5 

(2 7/8") 

28 

(1 1/8") 

Combi-Code Lock 1153, with code scrambling, 

and override key 

For installation in wood thicknesses from 13 mm (1/2") 

to 19 mm (3/4") 

Cam travel is 180º, and can be re-oriented. 

Material: Body, knob, and back: glass fiber 

reinforced polyamide 

Cam: steel, galvanized 

Orientation black 

horizontal – right 231.16.310 

horizontal – left 231.16.311 

vertical 231.16.312 

Packing: 1 pc. (includes 2 keys, 1 straight cam with 

snap ring for attaching cam, 1 back plate, 

2 affixing screws, and installation 

instructions) 




Mastercombi Locker Locks 

Setting a new combination on the Mastercombi: 

Turn the number dial at least one full turn clockwise, and then set 

“0” to the red mark. Insert control key and turn 90° clockwise. 

The spring bolt is now retracted and the door can be opened. 

Now depress and hold in the spring-loaded button on the rear of 

the lock housing. At the same time turn the number dial with the 

other hand 2 divisions clockwise to the “48” mark. Now release 

the spring-loaded button. Continue turning the dial clockwise until 

the adjusting spring can be heard to engage. The next combination 

is now set. Lock the cabinet door and withdraw the control key. 

Remember to register the new combination. 



Specially designed for Häfele. This trim piece, used in combination with the Mastercombi Lock, creates a clean professional look in wood doors. 

Mastercombi in connection with a Häfele Flush Handle for installation in wood doors 19 mm (3/4”) thick. 

85 

(3 3/8”) 

23 

(15/16”) 

Covering plate Mounting plate 

2 

Spring 

bolt 

19.5 

(3/4”) 

21 

(7/8”) 

43 

(1 11/16”) 


23 

Ø 5 (3/16”) 

48 

(1 7/8”) 

7 

(5/16”) 

Special Flush Handle 



light grey (RAL 7035) 231.14.500 

black (RAL 9005) 231.14.300 


Special Strike Plate 

For Mastercombi installations in wood doors. 





45 

40 

35 

Flat Head 

#6 

6 

(1/4”) 

Ø 5 (3/16”) 

3 

(1/8”) 

8 

(5/16”) 

Ø 80 

(3 3/16”) 

8 

(5/16”) 



560

17 

56 

Mastercombi Locker Locks 

• Mastercombi combination locks 

are suitable for safe deposit 

boxes, wardrobes and lockers. 

• The rust protected steel lock 

housing is theft-proof and sturdy 

with rust-proof internal elements. 

• A high security system as each 

lock comes with 5 different, 

pre-programmed, 3 digit number 

combinations. 



561 

Please Note: 

• Different combinations can not 

be chosen or programmed by 

end Forma user. del armario 

de acero, sólo como 

• Control sugerencia key is required to set a 

new combination. (order separately) 

Mastercombi for the installation in metal doors up to 3 mm (1/8”) thick 

For wood doors see extension set below. 

steel cabinet 

Spring 

Bolt 

Lock with 

spring bolt 

5 

(3/16”) 5.5 

(7/32”) 

56 

(2 3/16”) 

17 

(11/16”) 

6.5 

(1/4”) 

23 

(15/16”) 

17 

(11/16”) 

56 

(2 3/16”) 

Marking 

Marking 

19 

(3/4”) 

6.5 

(1/4”) 6.5 (1/4”) 

locked 6.5 (1/4”) 

unlocked 

Marking 

51 

(2”) 

56 

(2 3/16”) 

68 

(2 11/16”) 

Back view Front view 

35 40 

45 

Door hinged on left = Left lock 

30 

23 

(15/16”) 

25 

5 10 

20 

15 

Forma del armario 

de acero, sólo como 

sugerencia 

steel cabinet 

19 

(3/4”) 


Door hinged on left = Left lock 

• Please order left or right lock per diagram below. 

Door hinged on right = Right lock 

56 

(2 3/16”) 

68 

(2 11/16”) 

48 

(1 7/8”) 

drawer 

right hand 231.13.000 

73 

(2 7/8”) 


51 

(2”) 

6.5 

(1/4”) 

5.5 

6.5 (1/4”) 

locked 6.5 (1/4”) 

unlocked 

drawer 

(7/32”) 

Back view Front view 

Door 48hinged 

on right = Right lock 

(1 7/8”) Mastercombi lock 

• With 5 different, pre-programmed safety 

combinations and control key function (order separately) 

5 

• With “easy grip and pull” handle 

73 

•(2 7/8”) With spring bolt 

Material: Lock housing: steel, galvanized and chromatized 

Housing cover: stainless steel, rustproof 

Rotary knob: plastic, black 


Cat. No 

left hand 231.13.055 

Packing: 1 pc. (includes 2 nuts with integrated lock washer) 

Control key for Mastercombi (order separately) 

Cat. No. 

231.13.091 


Extension set for Mastercombi, allows for installation in 

wood doors from 17.5 mm (11/16”) to 19 mm (3/4”) thick. 

Material: Lock housing: steel 

Cat. No. 

galvanized and chromatized 231.14.950 

Packing: 1 set (includes 1 locking pin, 1 cylinder pin, 

1 driver extension and 2 screw extensions) 

Wood Application 

23 

(15/16”) 

27 

(1 1/16”) 

• Order strike plates separately, see next page 

35 40 

45 

30 

5 

25 

5 10 

20 

15 



Strike Plates 

19 

4.2 

11.5 

32 

6 6 

11.5 

22 8 




22 

20 

32 

20 

9 

12 

4.2 

4.2 

6 

13 

13 

1 

1 

32 

12.5 

11.5 

19 

33 

1 

40 

40 

Strike Plate 


Strike Plate 


18 Strike Plate 





black 


239.61.337 

Strike Plate 



black 


239.61.328 

Angle Strike 




black 239.40.301 100 pcs. 

brass-plated 239.40.507 100 pcs. 

Strike Plate 


Pan Head 

#8 

Pan Head 

#8 

Pan Head 

#8 


black 


239.61.319 

Flat Head 

#6 

Flat Head 

#6 



brass-plated 239.41.513 

bronzed 


239.41.111 

Flat Head 

#5 


nickel-plated 


239.41.022 



562

Strike Plates 



563 

32 

10 

29 

12 

60 

(2 3/8") 

33 

(1 9/32") 

30 

58 

13 

(1/2") 

6 

(7/32") 

57 

11 

10 

0.5 

(1/64") 

3 

(1/8") 

1.2 

6 2.5 

13 

10 

47 

25.5 

37 

1.5 

7.5 

1.5 

41 

45 

5 

Strike Plate 

With adjustment slots 


Strike Plate 




nickel-plated 


239.47.604 

Strike Plate 

For series drilled holes with 

adjustment slots 




brass-plated 


239.05.508 

Strike Plate 



brass-plated 239.02.516 


Discontinued 

Strike Plate 


VARIANTA 

3 

Flat Head 

#6 

VARIANTA 

5 


white 239.44.774 100 pcs. 

brown 239.44.176 10 pcs. 

Discontinued 

Flat Head 

#5 

Flat Head 

#5 

Flat Head 

#8 



brass-plated 


239.26.507 



Varianta screws page 311 




Profile Strips 

• Stop Strips (hard and soft PVC combined), for sealing of cabinets with two doors but without a center panel 


2 

12 

25 

0.8 

1.5 

2 

2.5 

10 

20 

20 

30 

17.8 

4.8 

11 

Peel-off 

Soft PVC 

Self-adhesive 



Flat Head 

#5 

Stop Strip, screw-mounted 



white 239.92.750 

brown 239.92.150 

Packing: 1 pc. (2.5m (98”) 

Discontinued 

Stop Strip, with pressure sensitive adhesive 



brown 239.91.100 

black 239.91.300 

Packing: 1 pc. (2.5m (98”) 

Stop Strip, screw-mounted 



white 239.90.700 

brown 239.90.100 

Packing: 1 pc. (2.5m (98”) 

Discontinued 

Door sealing profile, self-adhesive 

Material: plastic, with soft PVC lip 

Colour 

white 

0.8 

17.8 Cat. No. 

716.60.707 

11 

brown 

Auto adhesivo 

Packing: 1 pc. (2.5m desprendible (98”) 

PVC blando716.60.109 



564

Automatic Door Bolt 



565 


This automatic door bolt locks double panel doors without additional stop strips or furniture bolts. The elegant door catch is mounted inside the 

cabinet. The hook and wedge element are mounted to the inside of either the right or left door. The door with the hook element must be closed 

first. Upon closing the second door, the wedge element automatically blocks the door catch. The door with the wedge element must now be 

made lockable with a lock. 

Wedge 

Element 

3.5 

min. door width 

= 406 mm (16”) 

Hook 

Element 




bronzed 245.58.156 


10 9.5 


10 

4.2 

31.5 

11.5 

11.5 

36 

8 10 10 

44 

50 

29 

17 

2 

3 

32.5 

Flat Head 

#6 




Dialock Furniture Locking System 

Dialock in Furniture and Casework 

The convenient and safe locking system from Häfele. 

Storing files and valuables safely is a prime challenge to a modern 

reliable locking system. With the DIALOCK furniture locking system, 

drawers, compartments, shutters, etc. are locked electromagnetically. 

The individual locking units are controlled by a central component – 

the Dialock Furniture Terminal (DFT). 

(DFT) meets all requirements for convenient electronic locking. 

Different levels of expansion are feasible so that every planner has 

optimum design freedom. 

The advantages (“recore”) 

• Centralized opening and locking of complete cabinet systems. 

• If a Key (“electronic key’) is lost, the locking authorization can be 

withdrawn without having to replace locks on all the pieces of 

furniture. 

• The DIALOCK locking system can be extended to entrance doors, 

offices, or buildings without any problems or changes to the 

locking units or the (DFT). The User Key can be reprogrammed 

and reused. 

• Specialized consultants are available for further levels of expansion, 

such as facility management with time and attendance. 

The components 

The DIALOCK furniture locking system consists of the following 

components: 

• Dialock Furniture Terminal (DFT) with antenna DFANT 

• DIALOCK Electronic Key set 

• Electric Furniture Lock (EFL) 

• Distribution block or output extender 

Dialock Furniture Terminal (DFT) with antenna DFANT 

The Dialock Furniture Terminal (DFT) is suitable for concealed 

installation. From the Dialock Furniture Terminal (DFT), electric 

furniture locks (EFL) are controlled. In order to operate the system, a 

DIALOCK Key (the “electronic key”) is presented in front of the 

external antenna. 

The (DFT) will give an audible signal when a valid user key is 

presented to the device: 

• A single signal for a valid key 

• A double signal for an invalid key 

Dialock Electronic Key set 

The set generally consists of three keys. Typically one user (depends 

on the required amount for the application), one Programming ADD 

key and one Programming DELETE key are needed to make the 

system work. 

When a key (“electronic key”) is presented to the DFANT antenna, the 

data stored (unique code) on the key is analyzed. Specified electric 

furniture locks (EFL) are triggered according to the authorization of 

the key. 

The locking units are opened or locked with the User Keys. Up to 

200 User Keys can be assigned. 

Access authorizations are assigned or withdrawn with the 

Programming ADD and DELETE keys, respectively. 

Advantages 

• Wear and tear free (contactless data transfer) 

• Maintenance free (no batteries required for keys) 

• Insensitive to external influences, such as 

- Magnetic fields 

- Mechanical vibrations 

- Humidity/moisture 

- Dust 

• User Keys can be reprogrammed at least 100,000 times 

• Forgery-proof coding (unique ID on each key) 



Electric Furniture Lock (EFL) 

The electric furniture lock is an electromechanical catch especially 

adjusted to fit the Dialock Furniture Locking System. 

Distribution Block 

The electric furniture locks (EFL) are triggered by the Dialock Furniture 

Terminal (DFT) via a connection to a distribution block. 

Dialock Furniture Locking System allows implementing solutions with 

electric furniture locks (EFL) either keyed alike or keyed differently. 

For the keyed alike solution, a maximum of 6 locks can be connected 

via the distribution block. This solution can be extended to a 

maximum of 11 locks with an additional distribution block. 

Output Extender (OE) 

For the solution with keyed differently application, the output 

extender OE is used. A maximum of 8 locks can be connected to the 

output extender. Each lock can then be assigned locking authorization 

to individual keys or groups of keys. 

Three solutions for individual areas of application 

The Dialock furniture locking system offers three solutions: 

• Maximum 11 keyed alike locks using the distribution blocks and EFL 

• Maximum 8 locks with a keyed differently application using the 

output extender and EFL 

• Maximum 11 keyed alike locks using the distribution blocks and EFL 

AND maximum 8 locks with a keyed differently application using 

the output extender and EFL 

For all three solutions, you can choose between two different locking 

types: 

Toggle Lock function (opened/ locked with presentation of 

valid key) 

If an authorized User Key is presented to the (DFT), the EFL lock is 

triggered and opened. It stays opened until the User Key is 

presented to the (DFT) again, when the lock(s) close. 

Cycle Lock function 

(opened with presentation of valid key, relocks automatically) 

If an authorized User Key is presented to the (DFT), the EFL lock is 

triggered and opened for 3 seconds. With this time span, the locking 

unit (door or drawer) can be opened. After the 3 seconds have 

passed, the EFL locks again automatically. The time span can be 

adjusted between 1 and 25 seconds by means of the Configuration 

Transponder, OPEN TIME #74. 

566

Applications 

1 

567 

5 

4 

5 

3 

6 

2 

1. Power Supply 

2. Dialock Furniture Terminal DFT 

3. External Antenna DFANT 

4. Distribution Block 

5. EFL Lock 

6. 1-2 Distribution Block 

5 

2 

3 3 

5 

1 

5 

Output Power in 

Antenna Extender 

1. Dialock Furniture Terminal DFT 4. Power Supply 

2. External Antenna DFANT 5. EFL Lock 

3. Distribution Block 

2 

5 5 

4 4 

1 

Output Power in 

Antenna Extender 

1. Dialock Furniture Terminal DFT 4. Distribution Block 

2. External Antenna DFANT 5. EFL Lock 

3. Power Supply 

5 

4 

4 

3 

• Kiosks 

• Desks 


• Credenzas 

• Cabinet doors 

• Store fixtures 

• Drawers 

• Jewelry cases 

• Teller doors 




Dialock Furniture Terminal 

DFT Internal Antenna 

Application 

• Up to 200 keys can be authorized at a single terminal 

• Indication of lock state through LEDs (red/green) and audible beep 

• Configurable locking state 

• Cycle Operation: Can be configured for 1 -25 seconds with optional configuration key stick 

(Pre-set default time: 3 seconds) 

• Toggle Operation: Present key to open, re-present key to lock 

Areas of application: 

• For use with Dialock simple programming only 

• For use with Dialock SpeedKey and TI-RFid Transponders only 

• For use with Furniture Locking Systems (FLS) 

• Suitable for interior use 

Function: 

• If an authorized electronic key is presented to the unit, all locks are 

activated simultaneously. Maximum 11 electric locks. 

• Optional Output Extender: If an authorized electronic key is presented to 

the unit, independent control of up to 8 electric locks is possible. 

• Optional LED interface: (customer supplied) 

3 

(1/8") 

3 

(1/8") 

12 47 

(1/2") 

12 (1 7/8") 

47 

(1/2") (1 7/8") 

External mounting 

44 

(1 3/4") 44 

47 

(1 3/4") 

(1 7/8") 47 

(1 7/8") 

Antenna 

Cable Antenna 

Cable 

12 

(1/2") 

12 

(1/2") 

9 (3/8") 

9 (3/8") 

44 

(1 3/4") 

44 

(1 3/4") 

6 

(1/4") 

6 

(1/4") 

Internal mounting 

Configuration Key Stick, 

open time 

Cat. No. 

910.54.86X.74 


3 

(1/8") 

Power output 

Sold Separately: 

SpeedKey 3 page 577 

(1/8") 

Key Sticks page 576 

Simple Programming Tools 

TI-RFid page 577 

12 47 

12 

Output (1/2") Extender (1 7/8") 

(1/2") 

Open Collector page 575 

Electric Locks pages 569-570 


12 

47 

50 

(2") 

LED 

100 

(4") 

Power input 

Extender 


25 

(1") 

Technical Data: 

• Voltage Supply: 12-17VDC 

11-14VAC 

• Continuous Current: 200mA 

• Output Extender: 50mA each 

• Switching Voltage Rating: 14V 

• Peak Current: 550mA 

• Temperature Range: 0 to +60º C 

(Inside only) (+32 to +140º F) 

Control Module, requires antenna (sold separately) 


light grey 

cycle operation 237.56.110 

toggle operation 237.56.150 

Packing: 1 pc. (includes mounting tabs and 1 metre 

(39”) secondary extension cord) 

Discontinued 

Control Module, with internal antenna 


light grey 

cycle operation 44 

237.56.120 

(1 3/4") 

toggle operation 237.56.160 

47 

Packing: 1 pc. (includes (1 7/8") mounting tabs and 1 metre 

(39”) secondary extension cord) 

Discontinued 

44 

(1 3/4") 

47 

(1 7/8") 

Antenna, 1 m length 


Colour 

9 (3/8") 

dark grey Antenna 

237.56.130 

Cable 

Packing: 1 pc. (1 metre (39”) length) Discontinued 

12 

Antenna 

44 

Antenna 

Cable 

44 

(1 3/4") 

6 

(1/4") Dimensions in mm 


568 

9 (3/8") 

6 

(1/4")

Furniture Locking Systems 

Electric Furniture Locks 

EFL1 is an electro-mechanical bolt lock with slam function, suitable for controlling access to doors and drawers in furniture 

and office equipment. The device stays unlocked as long as power is supplied to it, and is locked when it is not powered. 

EFL1 can be controlled by a switch or it can be integrated into a Dialock access control system. 

21.5 

(27/32") 

21.5 

(27/32") 

21.5 

(27/32") 

21.5 

Dimensions (27/32") in mm 


569 

1.7 

(1/16") 

Ø8 

(Ø5/16") 

27 

(1 1/16") 

16 

(5/8") 

Material: Lock and bolt plate: zinc, nickel-plated 

Bolt: nylon, grey 

Cable length Cat. No. 

1 m (39 3/5”) 237.56.000 

64 3 m (118 1/8”) 237.56.002 

(2 1/2") 

5 m (196 7/8”) 237.56.004 


20 

(25/32") 

15 

(19/32") 

64 

(2 1/2") 

42 

(1 21/32") 

4 

(5/32") 

Ø4 

(Ø5/32") 

Ø12 

(Ø15/32") 

Bolt Bolt Plate 

20 

(25/32") 

ø4 

(Ø5/32) 

32 

(1 1/4") 

17 

(21/32") 

20 

(25/32") 

Ø15 

(Ø19/32") 

64 

(2 1/2") 

75 

(3") 

16 

(5/8") 

32 

(1 1/4") 

13 (1/2") 

38 

(1 1/2") 

AMP Plug 


Specifications 

Voltage required: 12V DC ± 10% (not polarity sensitive) 

Current Consumption: 50 mA 

Duty cycle rating: Continuous duty (no time limit) 

Heat generated: 0.6 Watt 

Environmental range: 40° F to 120° F 20%~90% RH 

Tensile load limit: 

- Nylon bolt: 90 kg. Per DIN 68 852 

- Metal bolt: 130 kg. Per DIN 68 852 

Mounting: Via 2 screws. 

Drilling jig available 

Connections: Via 1 meter cable and AMP plug kit 

Minimum door width: 240 mm (9.5”) on inset doors 

Overlay doors 

Lock Body 

Drilling Jig for EFL1 Lock 

16 

(5/8") 

Pin 

5.5 (7/32") 

Pin Plate Lock body 

Provides easy alignment of the locking bolt to the lock 

case. 

Amp plug 


Cat. No. 

Inlay doors 

237.56.990 


5.5 (7/32") 

16 

(5/8") 

16 

(5/8") 

12.7 (1/2") 

Overlay doors 

Inlay doors 

12.7 (1/2") 

16 

(5/8") 

16 

(5/8") 

64 

(2 1/2") 

Flat Head 

#6 

Drawer mounting 

Material: Lock and bolt plate: zinc, nickel-plated 

Bolt: zinc, nickel-plated 

Cable length Cat. No. 

1 m (39 3/5”) 237.56.020 

3 m (118 1/8”) 237.56.022 

5 m (196 7/8”) 237.56.024 


Discontinued Discontinued 

Drawer box 

21.5 

(27/32") 

37.5 

(1 15/32") 

15 

(19/32") 

Min. 

38 mm 

(1 1/2") 

Raised flat head wood screws pages 309–310 



4 

13 

16 

16 

64



Electric Furniture Locks 

EFL6 – Electric Furniture Lock 

Areas of application: 

• For use with all electric and Dialock control devices 

• Suitable for interior use 

• For installation on furniture and cabinets 

• Suitable for hinged or sliding doors and drawers 

• Slam function 

Application examples: 

• Cabinet doors 

• Cabinet drawers 

• Jewelry cases 

• Teller doors 

• Beverage cases 

3" 

3" 

1 3/16" 

7/16" 7/16" 

1 9/16" 

Note: This lock must be wired to a controllable 

power source prior to installation of the strike plate. 

Otherwise, locking of the door may result. 

Specifications: 

Voltage / Current consumption: 12VDC / 187mA 

24VDC / 88mA 

Duty cycle rating: Continuous Duty 

Heat generated: 2.2 Watt (max.) 

Temperature range: 40º F - 120º F 

Tensile load limit: 90 kg. (200 lb.) 

Mounting: 2 screws 

Connections: 2 wires, 12” long 

Minimum door width: 240 mm (9.5”) 

Locking function Field changeable 

• Fail safe 

1 3/16" 

• Fail secure 

2 7/8" 

9/16" 

1 9/16" 

17/32" 

27/32" 

1 7/8" 23/32" 

1 1/4" 

2 3/16" 

1 3/16" 

1 9/16" 


2 7/8" 


1 3/16" 

9/16" 

1 9/16" 

Material: Lock body: steel 

Cover plate: steel, matt finish 

Lock bolt: steel, galvanized 


black 912.02.034 1 9/16" 

Packing: 1 pc. (includes lock body, lock bolt, male 

amp connection, mounting hardware 

and instructions) Discontinued 

1 7/8" 

3/4" 

3/4" 

5/8" 



570 

1 3/16" 

17/32" 

27/32" 

1 7/8" 23/32" 

5/8" 

1 1/4" 

2 3/16" 

2 7/8" 

9 

1 9/16"

EFLS Electric Furniture Locking System 

Switches 

Technical data 

• Temperature range: -25º C – 85º C 

• Rated voltage: 12v 

• Rated current: 6A 

• See pages 569 - 570 for optional locks 

• If more than one lock is to be wired to a switch, use optional blocks, see page 572 

• Note: switches are designed to be used on secondary power side 

• The electric switch kits can be used to control other low voltage devices, such as the Häfele lighting system 



571 

Escutcheon 

For consistency in customized wiring: 

Standard Polarity for various color 

codes of wire. 

Common or 

+Voltage -Voltage 

White Black 

White Brown 

Blue Brown 

Red Black 

Requires 7/8" 

diameter hole 

for mounting 

Switch 

Requires 21/32" 

diameter hole for 

mounting 

Wiring harness 

Adhesive 

on backside 

Male plug 

connects to 

Power Supply 

Female plug 

connects to 

Distribution block 

Male plug connects 

to Power Supply 

Female cap 

connects to 

distribution block 

or EFL1 lock 

Material: Lock bracket: steel 

Cylinder housing: zinc, die-cast 


core (up to 500 key changes) 

for keyed switch kit 

Insert, push 

Insert, 

until 

push 

they 

until 

snap 

they snap togehter together 


Switch Kit Toggle 

This kit provides all the parts required to control and to 

connect a Power Supply to an EFL Lock. The switch 

turns on or off the current to one lock, or to a group of 

locks. If more than one lock is to be wired to the 

switch, use distribution blocks. See page 572. 

Please note: This switch is designed to be used 

on secondary power side. 

Length black 

1000 mm (39 3 ⁄8") 823.78.318 

2000 mm (78 3 ⁄4") 823.78.327 


Keyed Electric Switch Kit 

Removable Cylinder Module System 

This kit provides all the parts required to control and to 

connect the Power Supply to the EFL Lock. The key 

switch turns on or off the power to one lock, or to a 

group of locks. Please order snap-in lock cores and 

keys separately. 

Cable Length black/unfinished 

1000 mm (39 3 ⁄8") 237.56.010 






Accessories 

• Extension cables and distribution blocks are 

provided with a female AMP cap on one end, 

and a male AMP plug on the other. 


• Temperature range: -25º C – 85º C 

• Rated voltage: 12v 

• Rated current: 6A 

Distribution Block 1:2 

The distribution block acts as a splitter, allowing 2 output 

devices to be connected to one input device. It has one 

male plug wired to 2 female caps, which allows up to 

2 EFL 1 Locks to be connected to 1 output. Additional 

connectors can be made allowing other locks to be 

added. This process can be repeated as long as the 

current ratings for the system are not exceeded. 



blue 823.28.390 


Extension Cables 

The extension cables are used between components 

on the secondary side (low-voltage side) of the Power 

Supply. 

• 5 and 10 metre extension 

cables are only for use with 

furniture locking systems. 

Length black 

1 m (39 3 ⁄8”) 823.28.318 

2 m (78 3 ⁄4”) 823.28.327 

5 m (196 3 ⁄4”) 823.28.350 

10 m (393 3 ⁄4”) 


823.28.360 

For consistency in customized wiring: 

Standard Polarity for various color 

codes of wire. 

Common or 

+Voltage -Voltage 

White Black 

White Brown 

Blue Brown 

Red Black 

Suggested Wiring Assembly 

• Female AMP caps are typically located on the power source side. 

• Male AMP plugs are typically located on the load side. 

Data Cables 

The 4-conductor data cable is used for the transfer of 

information from a controller in a dialock multi-output 

terminal to the corresponding output extender, or 

between extenders. 

Length black 

500 mm (19 

Distribution Block 1:6 

The distribution block acts as a splitter. It has one male 

plug wired to 6 female caps, which allows up to 6 locks 

to be connected to one output. 

• For additional locks, a 2nd block can be plugged into 

one of the caps of the first block (adding 5 locks). 

This process can be repeated as long as the current 

ratings system, the power supply, and control device 

(switch) are not exceeded. 

5 ⁄8”) 910.51.090 

1000 mm (39 3 ⁄8”) 910.51.091 

2000 mm (78 3 ⁄4”) 910.51.092 

3000 mm (118”) 910.51.093 


Discontinued 



black 823.24.418 


Power Cord 

This power cord is required to supply DC voltage to 

the controller when using power supplies 917.93.004, 

and 917.93.005. 

• Length: 500 mm (19 5/8”) 



black 823.27.300 






572

80 

(3 9/64") 9/64 

80 

(3 9/64") 9/64 

Dialock Wall Terminal 

Dialock Wall Terminals act as intelligent switches in Access 

Control Systems. 

Wall Terminals contain 1 or 4 relays which act together to control 

a lock or group of locks. 

When an authorized key is presented, power is sent to electric 

devices, such as electric strikes, gates, electric furniture locks. 

Wall Terminal 2000 – TI-RFid 

Reader 

• Transmitter and receiver for data exchange with 

Dialock key 

• Transmits and receives through all non-metal materials 

• Infrared interface for communication with portable 

data transfer device 

• Illuminated diodes red/green for optical indication 

of programming action and locking status 

• Connection between reader & controller RS485 

(not included) RS485 cabling; 4-conductor CAT5E 

• Supplied with screw clamps & box frame 

• For exterior & interior use 

80 

(3 9/64") 9/64 

60 

52 

52 

42 

Reader mounting 

Ø 64 

(Ø 2 33/64") 

Ø 64 

(Ø 2 33/64") 



573 

38 

(1 1/2") 

38 

(1 1/2") 

42 

80 

(3 9/64") 9/64 

11 

(7/16") 

11 

(7/16") 86 

(3 3/8") 3/8 

Ø 64 

(Ø 2 33/64") 

38 

(1 1/2") 

Terminals must be installed by a qualified electrician, in 

compliance with all governing codes. 

52 

42 

105 

(4 1/8") 

11 

(7/16") 

86 

(3 3/8") 3/8 

Simple Programming 

Unique code of key is learned by the Dialock 

Terminal 

– A green programming key is presented, followed 

by user keys to be learned 

– A red programming key is presented, followed 

by a user key to be deleted 

– All learned keys can be deleted 

Controller 

• Available with 1 or 4 relays 

for control of connected 

devices 

• Inputs for entrance signals 

• Serial interface (RS232) for 

optional connection to 

On-line Set or PC for initial 

configuration 

58 

(2 9/32") 

105 

(4 1/8") 

46 

(1 13/16") 

86 

(3 3/8") 

60 

Sold separately: 

• For DIN rail mount for Controller 917.93.006, see page 574. 

• For Reader mounting, see 917.91.012 on page 574. 

Customer supplied: 

Reader cable RS485, CAT5E. 

• For TI-RFid Simple Programming tools, see page 577. 

Complete Programming* 

Windows based modules for Personnel, Hotel and Clinic 

applications. 

• Dialock programming software and hardware not included in this catalogue. 

Door Lock 

12V DC 

External 

Alarm 

Switch 

(if required) 

86 

(3 3/8") 

60 

Technical Data 

Voltage Supply 8-36V/DC direct current 

Continuous 

current intake < 150mA 

Peak current use 450mA 


Number of relays 1 or 4 

Contact load relay bias-reducing potential 

max. 60V/DC, 125V/AC 

Current on contact: max. 2A 

Contact rating: max 30W / 60 VA 

Continuous current: max. 1A 

Data retention 

during power cut 10 years 

Protection Class For exterior use 

Reader module IP 65 

Controller IP 20 

Controller 

Reader 

Temperature range 

Reader -20º C – 80º C (-4º – 176º F) 

Controller 0º C – 60º C (32º – 140º F) 

Relative humidity 0 to 95% 

(Not condensating) 


NO 

NC 

COM 

Power Relay 

To 

12V DC 

Power 

Supply 

Unit 

Input 

Max. 200 m 

650 ft. 

Exit Switch 

(if required) 

DCBA 

CD 

B A 

Reader 

Online 

RxD 

TxD 

GND 

Online Cable 

3 x 2 x 0.8mm 

Max. 200 m 

650 ft. 

46 

Material: (1 13/16") plastic 

Number of relays grey 

1 917.01.101 

58 4 

(2 9/32") 

917.01.104 


Discontinued 




Wall Terminal 2000 - Accessories 

Ø 700 

(2 3/4 3/4") 

Ø 700 

(2 3/4 3/4") 

466 

9 52 

(3/8") (2 1/16") 

42 

(1 11/16") 

Reader Socket, flush-mount 

• For flush-mounting Reader to wall 





orange 917.91.012 


Discontinued 

Reader Socket, surface-mount 

• For surface-mounting Reader to wall 



black 917.91.011 


Discontinued 

DIN rail mount plate 

• For flush-mounting Controller to wall or enclosure 

500 mm (19 11/16”) x 35 mm (1 3/8”) x 8 mm (5/16”) 





End Clamp 

• For securing Controller to DIN rail mount 

49 mm (1 15/16”) x 35 mm (1 3/8”) x 10 mm (3/8”) 

Material: plastic; steel base and screw 


black 917.93.007 




574


Multi-Output Terminals control outputs 

in groups of eight (up to 128 

outputs). Each output can control 

power to one, or a group of locks. 

Simple Programming 

Unique code of key is learned by the 

Dialock Terminal 

– A green programming key is 

presented, followed by user keys 

to be learned 

– A red programming key is 

presented, followed by a user key 

to be deleted 

All learned keys can be deleted. 

• For TI-RFid® Simple Programming 

tools, see page 577 

64 

(2 1/2") 

Terminals must be installed by a qualified electrician, 

in compliance with all governing codes. 



575 

100 

(3 15/16") 

64 

(2 1/2") 

274 

(10 13/16") 

Output Extenders are available in two switch 

functions options: 

• Open Collector: when an authorized key is 

presented, power is provided at assigned 

amp cap outlet. 

• Relay: when an authorized key is presented, 

an internal relay opens or closes the contact 

connected to assigned amp cap. 


Windows based modules for 

Personnel, Hotel and Clinic applications. 

• Dialock programming software and 

hardware not included in this catalogue. 

*Contact Dialock dept. for details. 

Multi-Output Terminal – TI-RFid 

Reader 

• Transmitter and receiver for data exchange with dialock key 

• Infrared interface for communication with portable data transfer device 

• Illuminated diodes red/green for visual indication of programming 

action and locking status 

• 2.5 m (98") flat band cable and plug for connection to controller 

• Optional spacer plate for surface mounting 

• Decorative foil face 

10 

(3/8") 

39 

(1 17/32") 

12 (1/2") 

100 

(3 15/16") 

Ø58 

(Ø2 9/32") 

30 

(1 3/16") 

65 

(2 9/16") 

57 

(2 1/4") 

130 

(5 1/8") 

115 

(4 17/32") 

94 

(3 11/16") 

79 

(3 1/8") 

50 

(1 31/32") 

90 

(3 17/32") 


Areas of application 

• For use with all Dialock solutions 

Consists of: Reader, Controller and Output Extender 

Operates in Simple or Complete Programming Options 

• For use in DFLS Dialock Furniture Locking Systems 

Output Extender with 8 Amp Caps 

Select from open collector or relay 

• Additional extenders can be added for a maximum 

total of 8 units or 128 sockets 

Controller 

• Real time clock - utilized in Complete Programming solutions 

• Serial interface (RS232) for connection to laptop for programming 

• Data port for connection to output extender(s) 

• Connection for flat band cable from reader 

Material: Reader/Controller; plastic, grey 

Output Extender; plastic, dark grey 

Cat. No. 

Open Collector Relays 

Multi-Output Terminals with one output extender 910.51.071 910.51.070 

Additional Output Extenders (optional) 


910.51.081 910.51.080 

Technical Data Controller Output Extender Output Extender 

Open collector Relay 

Power Supply 10 –12V/DC 10 –12V/DC 10 –12V/DC 

Continuous current use 200mA 30mA 30mA 

Output Voltage 12 V/DC 

Current use per EFL1 50mA 

Current per relay 50mA 

Contact Load relay 

Switching Voltage 50 V 

Switch current rating 500mA 




Dialock Keys 

TI-RFid 

Features 

• Contactless data transmission 

• No batteries required 

• Insensitive to: 

– Magnetism 

– Mechanical vibrations 

– Humidity/moisture 

– Dust 

• Reusable 

• Forgery proof – 4.3 billion unique codes 


• Temperature Range: –13ºF to +185ºF 

• Data Storage - > 10 years 

10 

3/8” 

8 

5/16” 

67 

2 9/16” 

Key Stick – TI-RFid 

Key Clip – TI-RFid 



Features 

• For use with all Dialock TI-RFid programming options 

• Read/Write transponder 

Length: 67 mm (2 9/16”) 



black 917.04.000 

yellow 917.04.003 

blue 917.04.004 

grey 917.04.005 

orange 917.04.006 


Discontinued 

Features 

• For use with all Dialock TI-RFid programming options 

• Read/Write transponder 

40 mm (1 1/2”) W x 70 mm (2 3/4”) L x 10 mm (3/8”) D 



dark grey 910.54.810 



Discontinued 

Key Wristband – TI-RFid 

Material: Key: plastic, black 

Wristband: nylon, coloured with velcro closure 

295 mm (11 1/2”) x 19 mm (3/4”) 


red 910.54.720 

yellow 910.54.721 

green 910.54.722 

blue 910.54.723 

black 910.54.724 


Discontinued 



576

Dialock Keys 

Features 

• Contactless data transmission 

• No batteries required 

• Insensitive to: 

– Magnetism 

– Mechanical vibrations 

– Humidity/moisture 

– Dust 

• Reusable 

• Forgery proof - 4.3 billion 

unique codes 



577 


• Temperature Range: 

–13ºF – 140ºF 

• Data Storage - > 10 years 

• Detailed simple programming 

instructions available upon request 

Simple Programming Tools 

TI-RFid Programming Key Stick 

Simple Programming Overview 

• A programming addition (Green) key stick is used to add the unique digital code of Dialock keys to the 

authorized list in a Dialock terminal. 

• A programming deletion (Red) key stick is used to delete the unique digital code of a Dialock 

key from the authorized list in a dialock terminal. 

• All authorized keys can be deleted. 

10 

3/8” 

8 

5/16” 

67 

2 9/16” 

• Programming tools must be purchased separately. The programming tools are introduced when a 

terminal is first powered. This allows the user to decide how many programming sets are practical for 

an application. 


SpeedKey – TI-RFid with key ring 

Length: 38 mm (1 1/2”) 

Key ring: 20 mm (3/4”) 

Diameter: 11 mm (7/16”) 



black 917.04.043 


Features 

• For use only with Dialock TI-RFid Simple 

Programming solutions. 

• Contains a secure read/only digital code. 

Length: 67 mm (2 9/16”) 



green - addition 917.04.012 50 pcs. 

red - deletion 917.04.021 1 pc. 

Discontinued 




Dialock Key 

Accessories 

Key Tag 

Key Ring 



Size: 22 mm (7/8”) H x 55 mm (2 3/16”) L 

Material: plastic; Hook: steel 


red 231.66.207 

blue 231.66.216 

black 231.66.234 

white 231.66.289 


Discontinued 

Size: Ø 20 mm (3/4”) 



nickel-plated 


231.66.001 

Key Retractor 

Size: Ø 43 mm (1 11/16”) x 12 mm (7/16”) 

Material: chrome 


black 917.94.060 


Discontinued 



578

Dialock LockerLock 

Tag-it 

Programming options: 

• Simple Programming features – default setting, 

see page 577 

• Wellness Function – user selects any one open cabinet 

or locker 



applications. 

* Dialock programming software and hardware not 

included in this catalog. *Contact Dialock dept. 

for details. 

Inset Installation 

9 

(11/32") 



32 

(1 1/4") 

10 

(3/8") 

4 

(5/32") 8 (5/16") 

17 

(21/32") 

579 

Ø22 

(Ø 7/8") 

120 

(4 11/16") 

30 

(1 3/16") 

64 

(2 1/2") 

Overlay Installation 

9 

(11/32") 

22 

(7/8") 

12 

(1/2") 

34 

(1 5/16") 

U 

110 

(4 5/16") 

72 

(2 13/16") 

Ø22 

(Ø7/8") 

4 

(5/32") 8 (5/16") 

17 

(21/32") 

New 

Item 

Ø22 

(Ø 7/8") 

Technical Data 

• Can be mounted on left hand or right hand door 

• Memorizes up to 200 user keys 

• Memorizes last 150 key uses 

(Complete Programming feature only) 

• Requires (4) 1.5V/DC AA Premium Batteries 

– Replacement after 10,000 cycles 

– Under low power, locking is not possible 

– Batteries accessible only with special tool 

• Includes locker label without number 

17 

(21/32") 

4 

(5/32") 

33 

(1 5/16") 

70 

(2 3/4") 

9 (11/32") 

20 (13/16") 

For door thickness: 

13 – 19 mm (1/2” – 3/4”) 

Minimum cabinet width: 

140 mm (5 1/2”) 

37 

(1 7/16") 

For lockerlock accessories, 

see page 104. 


LockerLock Set with 2 Screw Caps 

• For use on locker or casework doors. 

• Transmitter and receiver for exchange with 

Dialock key. 

• Red/Green LED for visual indication of programming 

progress and key authorization (on interior box) 

• Catch has 2 states: 

Open – with push button extended 

Locked – with push button retracted 

• To lock and unlock - press the push button with 

an authorized key 

• Optional – Wellness Function 

– Free choice of open lockers 

– Any key can lock then open any locker 

– Emergency Master Key 

– Requires Info Terminal 

• Mounts to inside of door with (4) 4 mm 

countersunk screws 

• Utilizes Tag-it technology 

• For use with Dialock Tag-it keys 

Flat Head 

#8 



grey 231.90.010 


Locker/Cabinet Label 

Trim and label locks push button 

Colour: silver 

without numbers 

Cat. No. 

231.81.100 

with numbers* 231.81.00X 


Discontinued 

*Special order – specify 4 digit number range 





Dialock Info Terminal 

TI-RFid 

Wellness Function: 

LockerLocks can be configured in: 

• Simple programming, see page 577. 



applications. 

• Dialock programming software and hardware not 

included in this catalogue. *Contact Dialock dept. for 

details. 

180 

(7 1/16”) 

Features 

• Transmitter and receiver module for data exchange 

with electronic keys 

• 2 function buttons, LCD (4 lines, 16 characters each) 

for menu-driven data input/communication in 

maintenance mode 

• Infrared interface for communication with handheld 

programming devices. 


Power Supply Direct voltage 10 –12V/DC 

Alternating voltage 8 – 9 V 

Continuous current input 200mA 

Peak current input 

400mA 

Safety class IP65 

Temperature range 0ºC – 60ºC 

(32°F – 140°F) 

Relative humidity (non-condensing) 0 – 95% 

For power cord, see 823.27.300 on page 572. 

130 

(5 1/8”) 

• Wellness + Simple 

• Wellness + Personnel 

Wellness function allows a user to 

lock any available open LockerLock. 

• A user key may lock only one unit. 

• When the user unlocks the LockerLock, the unit 

is available for any user and the user key is 

“unblocked” and usable at any open Locker Lock. 

• If Wellness is used for ‘day use’ management of 

the locks, emergency keys are programmed using 

either Simple or Complete programming. 

110 

(4 5/16”) 

Supplied with: 

• Cover gasket 

• 4 Rubber bumpers 

• Wall mounting plate 

• Screws 



Areas of application 

• Required only for the Wellness function of LockerLock 

• Utilizes TI-RFid technology 

Functions 

• Reading the number of the locker for which the 

electronic key is authorized 

• Data input in maintenance mode via display and 

function keys 

• Unblocking keys if an emergency key was used 

to open a LockerLock 

• Language selection: English, Spanish, French, 

German, Italian 



white 910.51.751 


Discontinued 

10 

3/8” 

8 

5/16” 

67 

2 9/16” 

Configuration key sticks 

Length: 67 mm (2 9/16”) 


teal 

Wellness + Simple 917.04.033 

Wellness + Personnel 917.04.032 

Battery change 910.54.86X.7D 


Discontinued 



580

Dialock LockerLock 

Accessories 

Strike plate, screw-mounted 





581 

60 

(2 3/8") 

33 

(1 9/32") 

13 

(1/2") 

6 

(7/32") 

0.5 

(1/64") 

3 

(1/8") 



Battery Cover Removal Tool 

• Battery cover is removed only with this tool 

• Prevents theft and tampering 

45 

(1 3/4") 


116 

(4 9/16") 

42 

(1 21/32") 


dark grey 231.80.100 


Batteries, Alkaline AA, 1.5 V 


Flat Head 

#6 

Cat. No. 

910.54.980 

Strike plate, angled 


42 

(1 21/32") 28 

(1 7/64") 


11 

(7/16") 




26 

(1") 

1.5 

(1/16") 


nickel-plated 


239.47.604 

Operating Instructions Label 

Place near lock push button. 

Pan Head 

#6 

Size: 65 (2 9 ⁄16”) W x 68 (2 11 ⁄16”) H 


silver 231.81.200 

transparent 231.81.300 

Packing: 10 labels 

Discontinued 



StealthLock 

Battery Powered RF Cabinet Lock 

StealthLock electrically controls cabinet doors and drawers. 

It operates in passage or cycle modes, and is released with 

an RF controlled key pad transmitter. 

Features: 

• One key pad transmitter can activate an unlimited 

number of locks within a 4.5 m (15 ft.) range 

• Lock powered by 4–AAA batteries (not included) 

• Low battery indicator on key pad transmitter and lock 

• Meets ANSI/BIFMA 50 lbf. pull strength specifications 

• Slim design mounts in 1/2” drawer suspension clearance 

• For left or right hand operation 

• Toggle lock or timed unlock delay 

Areas of Application: 

• For interior use 

• For installation in wood, laminate 

or plastic cabinets and drawers 

109 

(4 5/16”) 

32 

(1 1/4”) 

9 

(11/32”) 

Door Strike Plate 

3/4" 

Door 

45 

(1 7/8”) 

28 

(1 1/8”) 

10 

(3/8”) 



Technical Data: 

Tensile load limit: 445 N. (100 lbf.) 

Environmental 

Operating temperature: 10º to 49º C (50º to 120º F) 

Humidity (operating): 95% 

Electrical 

Supply voltage: 6 VDC (4 - AAA batteries) 

Connections: Battery pack, self-contained 

Battery Life: 4000 lock cycles 

Standards Compliance FCC 

Solutions Available 

– Standard: For most general office or residential applications. 

– Dedicated: Factory programmed. For projects; Ideal for 

assigned lockers and fitness lockers. 

Modes Available – Both Solutions 

– Self-Lock Mode (Cycle) 

– Passage/Manual Lock Mode (toggle) 

– Single Use Mode (day use) 

Cabinet 

Typical overlay door 

172 

(6 3/4”) 

Receiver Latch 

3/4" 

86 

(3 3/8”) 

Key Pad Transmitter 

64 

(2 1/2”) 

38 

(1 1/2”) 

11 

(7/16”) 

8 

(5/16”) 

StealthLock Battery Powered RF Cabinet Lock Set 

Material: Receiver Latch and Key Pad: plastic 

Door Strike Plate: steel 

Colour Item No. 

black 237.56.350 

Packing: 1 set (includes installation tool, mounting screws 

and instructions) 

Key Pad Mounting Plate 


Colour Item No. 

grey 237.56.994 


Note: Powered solution and emergency power available 

upon request. 



581A

StealthLock Accessories 

Battery Powered RF Cabinet Lock 

Additional Door Strike Plate for StealthLock 


Color Item No. 

black 237.56.988 

Packing: 1 pc. (includes mounting screws) 

Additional Installation Tool for StealthLock 


Color Item No. 

red 237.56.992 




581B 

32 

(1 1/4”) 

9 

(11/32”) 

28 

(1 1/8”) 

Door Strike Plate 

172 

(6 3/4”) 

Receiver Latch 


Key Pad Transmitter for StealthLock 

Material: plastic; Color: black 

8 

86 

Version (5/16”) 

(3 3/8”) 

Item No. 

*standard 237.56.170 

**dedicated 

38 

(1 1/2”) 

237.56.171 

Packing: 1 pc. (includes CR2032 coin battery) 

Key Pad Transmitter 

64 

(2 1/2”) 

11 

(7/16”) 

StealthLock Battery Powered RF Cabinet Lock 

Material: plastic; Color: black 

Version Item No. 

*standard 237.56.351 

**dedicated 237.56.354 


StealthLock Battery Powered RF Cabinet Lock 

with Door Strike Plate 

Material: Receiver Latch: plastic 

Door Strike Plate: steel; Color: black 

Version Item No. 

*standard 237.56.352

491 Locks - Häfele

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?