Operator's Manual - Smiths Medical
Operator's Manual - Smiths Medical
Operator's Manual - Smiths Medical
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SECTION 4<br />
Assembly Instructions<br />
S E C T I O N 4 • A s s e m b l y I n s t r u c t i o n s<br />
The EQUATOR Convective Warmer must be assembled and tested by authorized <strong>Smiths</strong> <strong>Medical</strong><br />
personnel, an authorized distributor of <strong>Smiths</strong> <strong>Medical</strong>, or competent personnel prior to placing the<br />
convective warmer in service. Read through the instructions completely prior to assembling the convective<br />
warmer.<br />
The following steps describe how to assemble and do preliminary set up of the convective warmer.<br />
Step 1: Unpack the Convective Warmer<br />
1 Check the contents and verify that all components are present. If any parts are missing or damaged, do<br />
not use the convective warmer. Contact <strong>Smiths</strong> <strong>Medical</strong> for replacement parts. Refer to the following list<br />
of components that are part of the convective warmer:<br />
• EQUATOR Convective Warmer<br />
• <strong>Operator's</strong> <strong>Manual</strong><br />
• Power Cord<br />
• Hose<br />
• Sheet Clip Assembly<br />
• Cord Wrap<br />
Note: After unpacking all the contents, recycle packaging material according to hospital policy for<br />
recyclable materials.<br />
EQUATOR ® Convective Warmer | Operator’s <strong>Manual</strong> 9