6700 Portable Sampler User Manual - Isco

6700 SAMPLERS
Chapter 1 Introduction
Chapter Contents
About 700 Series Modules
About the YSI 600 Sonde
Memory to Store Data
AboutthisManual
Pump Requirements
Getting Help
Sampler Features
Technical Specifications
Note
Because the 6700 Compact and
Standard Samplers share many
features, this manual includes
programming, operation, and
maintenance information for both
instruments. Except where specifically
noted, the contents of
this manual apply to both units.
6700 Controller
The 6700 Series Samplers are an integral part of Isco’s
comprehensive sampling system. The system includes the 6700
Compact Sampler, the 6700 Standard Sampler and the 6700FR
Refrigerated Sampler.
The 6700 portable samplers are easily moved from site to site.
Constructed from durable, corrosion-resistant materials, the
samplers withstand the hostile environments of industrial and
municipal monitoring sites.
The 6700 Compact differs from the 6700 Standard Sampler only
in size and sampling capacity. Both samplers use the same
controller and sample-delivery system. Both instruments accept
a variety of composite and sequential bottle kits.
ABOUT 700 SERIES MODULES
The bay on the controller’s side accepts any of Isco’s 700 Series
Modules. The 700 Series includes:
701 pH Parameter Module for monitoring pH and temperature.
710 Ultrasonic Module for monitoring a flow stream’s level
and flow rate with an ultrasonic level sensor.
720 Submerged Probe Module for monitoring a flow
stream’s level and flow rate with a submerged probe.
730 Bubbler Module for monitoring a flow stream’s level
and flow rate with a bubbler system.
750 Area Velocity Module for monitoring a flow stream’s
level, velocity, and flow rate.
780 4-20mA Input Module for interfacing to non-Isco
devices with 4 to 20 milliampere output signals.
The modules are optional accessories. The samplers do not
require them for operation. However, the modules offer a number
of advantages. First, they are an economical way to combine flowrate
or parameter monitoring with sampling. Second, you can
program the samplers and modules as a single unit. Finally, the
samplers store the readings in memory.
ABOUT THE YSI 600 SONDE
The sampler accepts the optional YSI 600 Sonde to monitor four
liquid parameters: temperature, pH, dissolved oxygen, and
conductivity. Conductivity readings can represent specific
conductance, total dissolved solids, salinity, or conductivity. You
program the sampler and YSI 600 Sonde as a single unit to
combine parameter monitoring with your sampling program. The
YSI 600 Sonde attaches to the sampler’s rain gauge connector.
The 6700FR also can support the YSI 6820 and YSI 600XL
sondes. See Chapter 6.
1