6700 Portable Sampler User Manual - Isco

ERROR CODES (CONTINUED)
6700 SAMPLERS
Table 10 (continued): Reports: Source Codes, Error Codes, and Program Events
OV PROBABLE OVERFLOW The sampler was directed to take a sample that would not fit into the bottle. Occurs for flow
paced, time override programs only.
P POWER FAILED The power supply failed during the sample event. Note: Power failures during five consecutive
sample events results in a LOW BATTERY shut-down.
PJ PUMP JAMMED The pump jammed.
SK SAMPLE SKIPPED Sample not taken.
US USER STOPPED You pressed the Stop key during the sample event.
PROGRAM EVENTS
‘A’/’B’ ENABLED (DISABLED) Program part ‘A’ or ‘B’ was enabled or disabled according to the program’s settings.
‘A’/’B’ DONE The sampler finished program part ‘A’ or ‘B’.
‘A’/’B’ PAUSED (RESUMED) Program part ‘A’ or ’B’ reached a programmed pause or resume time.
POWER FAILED The power source was disconnected.
POWER RESTORED The power source was reconnected.
PROGRAM STARTED The sampler started the sampling program.
PROGRAM DONE The sampler finished the sampling program.
PROGRAM PAUSED (RESUMED) The program reached a programmed pause or resume time.
PROGRAM STOPPED You selected Stop from the manual paused options, terminating the program.
SAMPLER ENABLED (DISABLED) The sampler was enabled or disabled by an external instrument.
PROGRAM ENABLED (DISABLED) The sampler was enabled or disabled according to program settings.
SAMPLE SKIPPED Sampler was in Manual Paused state when a sample event was initiated.
MANUAL PAUSE Stop was pressed during the program to enter the Manual Paused state.
MANUAL RESUME The resume program option was selected from the Manual Paused state.
GRAB SAMPLE A grab sample was taken while in the Manual Paused state.
PUMP TUBE REPLACED The pump tube alarm was reset while in the Manual Paused state.
VOLUME DELIVERED The volume actually delivered (entered by the user) during sample volume calibration.
CALIBRATE SAMPLE The sample volume was calibrated while in the Manual Paused state.
ADJUSTED LEVEL The level measured by a flow module was adjusted while manually paused.
INTERVAL CHANGED Sample pacing was changed while in the Manual Paused state.
VOLUME CHANGED Sample volume was changed while in the Manual Paused state.
ENABLE CHANGED Sampler enable thresholds were changed while in the Manual Paused state.
CHANGED SUCTION HEAD The suction head was changed while in the Manual Paused state.
63