6700 Portable Sampler User Manual - Isco

1
2
3
4
Interrogator
581 RTD
Viewing Data
RUN
PROGRAM
VIEW REPORT
OTHER FUCTIONS
Select VIEW REPORT.
VIEW DATA
PRINT DATA
SYSTEM IDs
CONFIGURE REPORTS
Select VIEW DATA.
VIEW:
SAMPLING REPORT
MODULE DATA
RAINFALL DATA
Select a report or data type.
VIEW:
DAILY SUMMARY
CURRENT READINGS
Select Daily Summary to view
the stored data, or Current
Readings to view real-time
data.
6700 SAMPLERS
Standard Sampler Bottle Collection
1. Open the latches, and lift the center section from the tub. Place
caps on the bottles.
2. Drain any ice water from the standard tub by opening tub’s
drain plug. Remember to replace the plug’s cap when done.
3. Attach a label to the tub or on each bottle detailing the
location, time, date, etc.
4. Replace the standard tub and/or bottles with a clean set.
5. Pour more ice in the tub.
59
SAMPLING REPORTS
The 6700 records a variety of data while running a sampling program.
It uses the data to produce four reports:
The Program Settings report, listing the program settings.
The Sampling Results report, listing the program settings,
time of samples and other program events.
The Combined Results report, combining the sample event
times with rainfall data, module data, or YSI sonde data.
The Summary report, listing daily summaries of data collected.
The Summary report may be rainfall and/or module data.
The sampler stores each report in memory where they remain
until you select RUN. Selecting RUN clears the memory so that it
can store the data from the next program.
COLLECTING REPORTS
There are a number of ways to collect the reports:
View reports on the sampler’s display.
Print the reports with an Isco 3770 Field Printer.
Collect the reports with an Isco 581 RTD and use a computer
to transfer the reports from the RTD to a file on the computer.
Collect the reports with an IBM PC or compatible computer
running FLOWLINK.
Collect the reports with and IBM PC or compatible computer
running SAMPLINK.
VIEWING THE DATA
Because the display area is much smaller than the area available
with a printed report, the report items displayed are a little different
from the printed items.
For the Sampling Report, the sampler displays each program
event, one at a time.
For the Module, YSI, and Rainfall Data reports, it displays
daily summaries, instead of the full reports available with
the field printer, RTD, FLOWLINK, or SAMPLINK.
If you select SAMPLING REPORT or RAINFALL (step 3 in Viewing
Data, shown in the margin), the sampler begins displaying
the report data. The sampler advances automatically through
the report items, displaying each item briefly. While the sampler
advances automatically through the displays: