6700 Portable Sampler User Manual - Isco

More documents

Recommendations

Info

6700 SAMPLERS RUNNING PROGRAMS To run a standard or extended program, select RUN from the main menu. You may also select YES at the RUN THIS PRO- GRAM NOW? screen at the end of the programming screens. This is illustrated in Figure 11. Extended programs scheduled to start at a clock time will not start until the programmed clock time on or after the first valid date. Note that if you have recently calibrated a parameter probe, the sampler may delay the start and display “PLEASE WAIT” until valid readings are expected from the probe. The delay accounts for the time typically required to install the probe, and lasts for five minutes after you complete the calibration. RUN TIME SCREENS While running a sampling program, the sampler displays a variety of messages that report the program’s status. For example, if the sampler has not yet reached the programmed start time, it displays the scheduled start time as well as the current time. (A few common run time displays are illustrated in Figure 11.) Once the program reaches the start time, you can determine the time of the next sample, the next bottle to receive a sample, sample distribution, and other information. Other messages appear while the sampler runs through a sampling cycle as it takes a sample. When the sampler needs to report multiple messages, it alternates them, displaying each for one to three seconds. Module and YSI Sonde Readings Samplers with an attached module display the module’s readings: pH and temperature for the pH module; percentage or flow rate for the 4-20 mA module; level, flow-rate, and flow volume readings for the flow modules; level, velocity, flow-rate, and positive flow volume readings for the area velocity module. Some module screens will alternate with the sampler screens. Samplers with an attached YSI Sonde will display the parameter readings selected during the YSI hardware setup. The YSI screens alternate with the sampler and module screens. 52 BOTTLE 2 IN 00:14:39 150 gpm 0.82 ft 00001438200 gal Y-pH: 8.1 Y-D.O: 4.90 mg/l Y-TDS: 1.000 g/l Y-TEMP: 29.2 C
Figure 11 Running a Program PROGRAMMING COMPLETE RUN THIS PROGRAM NOW? YES NO OR RUN PROGRAM VIEW REPORT OTHER FUNCTIONS Multiple Bottles Single Bottle RUN DISPLAYS 6700 SAMPLERS If RUN had been previously STOPped and no programming changes were made. ENTER START BOTTLE: __ (1– MAX) PLEASE WAIT! ...TESTING DISTRIBUTOR SYSTEM PROGRAM WILL START AT 06:00 MO 17– OCT 05:52:22 MO 17– OCT PURGING SUCTION LINE PUMPING 250 ml RINSING SUCTION LINE SAMPLE 2 IN 00:14:29 The Module and YSI readings are updated: Every five seconds when not running a program and not displaying the reading. Every five seconds when running a program and the backlight is on. At the programmed Data Storage interval when running a program and the reading is not used for enabling the sampler. At the lesser of the Check Enable or the Data Storage intervals when running a program and the reading is used for enabling the sampler. Every second when displaying the reading during programming. An ❋ (asterisk) appears next to the reading if the module or YSI was unable to take a reading. If an asterisk appears, the reading displayed is the last available reading. Flow rates will be reported as zero flow if the error persists for more than five minutes. 53 For the first run using a 24-bottle base. If applicable FATAL ERROR NO DISTRIBUTOR ARM! If applicable OPERATION ERROR DISTRIBUTOR JAMMED
Page 1:
INSTRUCTION MANUAL 6700 Portable Sa
Page 5 and 6:
Table of Contents Chapter1.Introduc
Page 7 and 8:
List of Figures 1. Menu Tree for St
Page 9 and 10: 6700 SAMPLERS Chapter 1 Introductio
Page 11 and 12: 6700 SAMPLERS Table 1: 6700 Standar
Page 13 and 14: SAMPLE DELIVERY SYSTEM FEATURES 670
Page 15 and 16: 6700 SAMPLERS Table 2: 6700 Standar
Page 17 and 18: 6700 SAMPLERS Table 3: Technical Sp
Page 23 and 24: 6700 SAMPLERS Chapter 2 Programming
Page 25 and 26: c d 6700 SAMPLERS To enter a number
Page 27 and 28: Entering Times and Dates e ENTER TI
Page 29 and 30: l m n Site Description or Program N
Page 31 and 32: Using Help Notes Although this exam
Page 33 and 34: Extended Programming Features Pacin
Page 35 and 36: Note: If the Bottle Full Detect set
Page 37 and 38: 6700 SAMPLERS Example 5 Standard Pr
Page 39 and 40: 6700 SAMPLERS Example 6 Storm Water
Page 47 and 48: Distributor Arm Figure 2 Installing
Page 49 and 50: 6700 SAMPLERS Figure 3 Placing the
Page 51 and 52: 6700 SAMPLERS Figure 6 Placing the
Page 53 and 54: Figure 9 Composite Bottles 6700 SAM
Page 55 and 56: 6700 SAMPLERS STRAINERS Isco offers
Page 57 and 58: WARNING If you must enter a manhole
Page 59: 6700 SAMPLERS Table 9 Connecting Is
Page 63 and 64: l m n o Warning Messages WARNING: R
Page 65 and 66: 6700 SAMPLERS Adjust Volume Select
Page 67 and 68: 1 2 3 4 Interrogator 581 RTD Viewin
Page 69 and 70: 6700 SAMPLERS To start a report fro
Page 71 and 72: ERROR CODES (CONTINUED) 6700 SAMPLE
Page 73 and 74: Figure 13 Report: Sampling Results
Page 75 and 76: 6700 SAMPLERS Figure 14 Report: Com
Page 77 and 78: Figure 15 Report: Summary (continue
Page 79 and 80: 1 2 3 4 5 6 7 8 9 10 Calibrating Sa
Page 81 and 82: 5 6 7 8 9 10 11 12 13 14 15 Diagnos
Page 83 and 84: The pump’s safety lock prevents t
Page 85 and 86: 6700 SAMPLERS Example 7 Resetting t
Page 87 and 88: CAUTION Desiccant may produce irrit
Page 89 and 90: 6700 SAMPLERS Chapter 5 Reference C
Page 91 and 92: Extended Time Pacing Screens The sc
Page 93 and 94: 14 15 16 17 Time Switched Distribut
Page 95 and 96: Internal Sampler Enable Screens Fig
Page 97 and 98: Pause and Resume Screens Screen cha
Page 99 and 100: 6700 SAMPLERS Figure 22 Start Time
Page 101 and 102: Selecting Hardware Setup 41 42 43 4
Page 103 and 104: Turning on Master/Slave Sampling 47
Page 105 and 106: Figure 23 Event Mark Timing Diagram
Page 107 and 108: Note Connecting either the serial o
Page 109 and 110: 6700 SAMPLERS The software version
Page 111 and 112:
Command Driven Mode Charts showing
Page 113 and 114:
6700 SAMPLERS 1 = WAITING TO SAMPLE
Page 115 and 116:
6700 SAMPLERS Chapter 6 Software Op
Page 117 and 118:
Table 13 6700 Telephone Commands Co
Page 119 and 120:
6700 SAMPLERS A flow-through chambe
Page 121 and 122:
6700 SAMPLERS Figure 26 Standard Pr
Page 123 and 124:
6700 SAMPLERS Figure 28 Standard Pr
Page 125 and 126:
Figure 30 View Report RUN PROGRAM V
Page 127 and 128:
Figure 32 Manual Functions Screens
Page 129 and 130:
6700 SAMPLERS Figure 35 Extended Pr
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
6700 SAMPLERS Figure 47 Analog Outp
Page 143 and 144:
6700 SAMPLERS Appendix B Material S
Page 145 and 146:
6700 SAMPLERS 137
Page 147 and 148:
6700 SAMPLERS 139
Page 149 and 150:
6700 SAMPLERS 141
Page 151 and 152:
6700 SAMPLERS 143
Page 153 and 154:
6700 SAMPLERS 145
Page 155 and 156:
6700 SAMPLERS 147
Page 157 and 158:
6700 SAMPLERS 149
Page 159 and 160:
The persons stationed at the surfac
Page 161 and 162:
Table 16 Hazardous Gases Gas Chemic
Page 163 and 164:
6700 SAMPLERS Appendix D Replacemen
Page 165 and 166:
6700 SAMPLERS ITEM INVENTORY NO. DE
Page 167 and 168:
6700 SAMPLERS MODEL 6700 CONTROLLER
Page 169 and 170:
6700 SAMPLERS MODEL 6700 CONTROLLER
Page 171 and 172:
Isco, Inc. P.O. Box 82531 Lincoln,
Page 173 and 174:
6700 SAMPLERS Bulk Sets of Bottles
Page 175 and 176:
6700 SAMPLERS YSI 600 Sonde YSI 600
Page 177 and 178:
G Grab samples 56, 70 Graduated cyl
Page 179:
DECLARATION OF CONFORMITY Applicati
show all

6700 Portable Sampler User Manual - Isco

Create successful ePaper yourself

Delete template?

Save as template?