6700 Portable Sampler User Manual - Isco

6700 SAMPLERS
Figure 4 Placing the 12-bottle kit in a standard tub
1. Slide the 12-bottle insert into
the tub, aligning the label
with the corresponding numbers
on the outside of the tub.
2. Place the bottles in the insert.
Secure the bottles against the
wall with the stainless steel
retaining ring.
3. Adjust the distributor arm to
the correct position, insert the
discharge tube, and attach
the distributor arm.
Figure 5 Placing the 8-bottle kit in a standard tub
1. Position the 8-bottle insert in
the tub, aligning the label
with the corresponding numbers
on the outside of the tub.
2. Place the bottles in the insert
and secure the ring with the
three draw cords.
3. Adjust the distributor arm to
the correct position, insert the
discharge tube, and attach
the distributor arm.
42