6700 Portable Sampler User Manual - Isco
6700 Portable Sampler User Manual - Isco
6700 Portable Sampler User Manual - Isco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>6700</strong> SAMPLERS<br />
Example 6 Storm Water Runoff Sampling<br />
Storm water runoff sampling is an ideal application for two-part<br />
programming. Typical monitoring permits require that a series<br />
of timed samples be taken during the initial portion of the storm<br />
event, followed by flow paced samples during the remainder of<br />
the event.<br />
Note<br />
To enable the Bubbler Module<br />
programming screens, insert the<br />
module before turning on the<br />
sampler.<br />
This example assumes that a Rain Gauge and a Bubbler Flow<br />
Module are connected to the sampler. Using a 24-bottle kit, it<br />
divides the bottles into two groups, with six bottles assigned to<br />
part ‘A’ and 18 to part ‘B.’ The sampler will begin taking samples<br />
after being enabled according to programmable enable controls;<br />
that is, when the rain gauge detects 0.15 inches of rainfall in 30<br />
minutes, and the module detects a flow stream level of more than<br />
0.25 feet. Because both program parts use the same enable settings,<br />
the sampler will enable both parts at the same time. A list<br />
of settings for the program follow:<br />
Program type: Extended.<br />
Program name: STORM.<br />
Site description: SITE 54.<br />
Units: Length–Ft,FlowRate–gpm,FlowVolume–gal<br />
Mode of Operation: Flowmeter, Flow-Insert, Round, 12"<br />
Bottle kit: 24, 1000-milliliter bottles.<br />
Suction-line length: 5 feet.<br />
Suction head: Auto suction head.<br />
Line rinses: None.<br />
Sampling retries: None.<br />
Part ‘A’ and ‘B’ bottle assignments: Bottles1-6topart‘A’,<br />
bottles 7 - 24 to part ‘B’.<br />
Part ‘A’ pacing: Time pacing, sampling every 5 minutes.<br />
Part ‘A’ distribution: Sequential, 1 sample per bottle.<br />
Part ‘A’ sample volume: 800 milliliters.<br />
Part ‘A’ enable: At least 0.15 inches of rainfall in 30 minutes<br />
and a flow stream level of more than 0.25 feet; once enabled,<br />
stay enabled, sample taken when the sampler is enabled.<br />
Part ‘A’ pause and resumes: None.<br />
Part ‘B’ pacing: Flow pacing, sampling every 2,500 gallons.<br />
Part ‘B’ distribution: Sequential, 1 sample per bottle.<br />
Part ‘B’ sample volume: 500 milliliters.<br />
Part ‘B’ enable: At least 0.15 inches of rainfall in 30 minutes<br />
and a flow stream level of more than 0.25 feet; once enabled,<br />
stay enabled, no sample taken when the sampler is enabled;<br />
first sample taken 20 minutes after the sampler is enabled.<br />
Part ‘B’ pause and resumes: None.<br />
Start time: Delayed start of 1 minute.<br />
730 Bubbler Module: Installed<br />
31