6700 Portable Sampler User Manual - Isco
6700 Portable Sampler User Manual - Isco
6700 Portable Sampler User Manual - Isco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Note:<br />
If the Bottle Full Detect setting is<br />
critical to your sampling program,<br />
always check this Hardware<br />
setting after you select a different<br />
Extended Program. See Bottle Full<br />
Detect on page 95.<br />
<strong>6700</strong> SAMPLERS<br />
Example 4 Selecting a Stored Extended Program<br />
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
<strong>6700</strong> SAMPLER,<br />
EXTENDED PROGRAMMING<br />
For HELP at any<br />
screen, press ? key.<br />
RUN “EXTENDED 1”<br />
PROGRAM<br />
VIEW REPORT<br />
OTHER FUNCTIONS<br />
PROGRAM NAME:<br />
"EXTENDED 1"<br />
SITE DESCRIPTION:<br />
"______"<br />
SELECT NEW PROGRAM<br />
CHANGE PROGRAM NAME<br />
“EXTENDED 1”<br />
“EXTENDED 2”<br />
“EXTENDED 3”<br />
“EXTENDED 4”<br />
PROGRAMMING COMPLETE<br />
RUN THIS PROGRAM<br />
NOW?<br />
YES NO<br />
RUN “EXTENDED 2”<br />
PROGRAM<br />
VIEW REPORT<br />
OTHER FUNCTIONS<br />
Nevertheless, you need another program because you want to<br />
move the sampler to site B, so you select “EXTENDED 2” and<br />
modify it for site B. The settings in “EXTENDED 1” are<br />
preserved automatically. When you return the sampler to site A,<br />
you won’t need to reprogram the sampler. Merely select<br />
“EXTENDED 1” again, double-check the program settings, and<br />
run the program.<br />
Selecting an Extended Program<br />
To select an extended program, follow the steps in Example 4.<br />
Press the On/Off key to turn the sampler on. Press ↵ (Enter) to clear the<br />
start-up message.<br />
If the words “STANDARD PROGRAMMING” appear on the second line of<br />
the start-up message, the sampler is using the standard programming<br />
screens. To see the extended screens, type <strong>6700</strong>.2 at the main menu shown<br />
in step 2.<br />
Select PROGRAM from the main menu.<br />
Select PROGRAM NAME: "EXTENDED 1" from the quick view menu.<br />
Select SELECT NEW PROGRAM to change the program.<br />
You can go through QUICK VIEW screens quickly by pressing ↵ (Enter) at<br />
each screen. You can also change settings in quick view screens; see<br />
Changing Settings in a Quick View Screen on page 22.<br />
Select the name of the extended program you want to use.<br />
Each program’s name appears on the same line. If you inadvertently give<br />
two programs identical names, you can still identify them by their location<br />
on the screen.<br />
To run the program immediately, select YES. To run the program later,<br />
select NO.<br />
27