6700 Portable Sampler User Manual - Isco
6700 Portable Sampler User Manual - Isco
6700 Portable Sampler User Manual - Isco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>6700</strong> SAMPLERS<br />
Chapter 6 Software Options<br />
Chapter Contents<br />
ProgramLock<br />
Switch Bottle Set at Enable<br />
Telephone Commands<br />
YSI 6820 and YSI 600XL<br />
Support<br />
The <strong>6700</strong> <strong>Sampler</strong>’s software (v3.1 and greater) includes specialized<br />
software options that can be purchased individually from <strong>Isco</strong>.<br />
Once activated, the purchased option is always available, even if<br />
thesoftwareisupgradedatalatertime.Theseoptionsmustbe<br />
installed at the factory.<br />
Thesoftwareoptionsinclude:<br />
Program Lock - Secures the access to the sampler’s<br />
program settings.<br />
Switch Bottle Set at Enable - a sample distribution<br />
option.<br />
Telephone Commands - Remotely control the sampler<br />
from a touch-tone telephone.<br />
YSI 6820 and YSI 600XL - Supports YSI sondes.<br />
To view which software options have been activated, select VIEW<br />
REPORT>SYSTEM IDs (see page 100). A software options<br />
screen will list a code for each active option.<br />
PROGRAM LOCK<br />
The Program Lock adds password security to the <strong>6700</strong> sampling<br />
programs. With this option activated, a user-selected password<br />
(up to five digits) must be entered before any program changes or<br />
run time modifications can be made. Run time modifications<br />
include accessing the <strong>Manual</strong> Pause menu options and shutting<br />
off the sampler. You will still be able to run the current program,<br />
view reports, and interrogate the sampler without the knowledge<br />
of the password.<br />
If three consecutive attempts to enter the password fail, a five<br />
minute “time-out” will follow in which most keys are deactivated.<br />
The user-selected password defaults to “<strong>6700</strong>” and may be<br />
changed in the Hardware options that are available in the<br />
Extended Program mode. While the password may only be<br />
changed in the extended program mode, the program lock works<br />
for both Standard and Extended programs.<br />
Should you forget your password, a key code can be obtained<br />
from <strong>Isco</strong>’s Customer Support Department for a nominal fee.<br />
107<br />
Code Software Option<br />
1108 Program Lock<br />
1109 Phone Commands<br />
1115 YSI 6820 and 600XL<br />
1199 Switch Bottle Set at Enable