6700 Portable Sampler User Manual - Isco
6700 Portable Sampler User Manual - Isco
6700 Portable Sampler User Manual - Isco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
32<br />
33<br />
34<br />
35<br />
36<br />
37<br />
38<br />
39<br />
40<br />
Other Functions Menu<br />
RUN “PROGRAM NAME”<br />
PROGRAM<br />
VIEW REPORT<br />
OTHER FUNCTIONS<br />
Select OTHER FUNCTIONS.<br />
MAINTENANCE<br />
MANUAL FUNCTIONS<br />
PROGRAMMING STYLE<br />
HARDWARE<br />
NotethattheHARDWARE<br />
option appears only in<br />
extended programming.<br />
Operating the Pump<br />
GRAB SAMPLE<br />
CALIBRATE VOLUME<br />
OPERATE PUMP<br />
MOVE DISTRIBUTOR<br />
SELECT DIRECTION<br />
PUMP FORWARD<br />
PUMP REVERSE<br />
PURGING. . .<br />
PRESS THE RED ‘STOP’<br />
KEY WHEN DONE<br />
PURGED _____COUNTS<br />
Moving the Distributor<br />
Arm<br />
GRAB SAMPLE<br />
CALIBRATE VOLUME<br />
OPERATE PUMP<br />
MOVE DISTRIBUTOR<br />
Select MOVE<br />
DISTRIBUTOR<br />
GO TO BOTTLE ____<br />
(1-MAX)<br />
Enter the bottle number<br />
to which you want to<br />
move the distributor<br />
NOW AT BOTTLE ____<br />
<strong>6700</strong> SAMPLERS<br />
OTHER FUNCTIONS<br />
The “Other Functions” menu screen includes options for<br />
Maintenance (See Chapter 4.)<br />
<strong>Manual</strong> Functions.<br />
Programming Style.<br />
Hardware (See Hardware Setup.) The Hardware menu option<br />
appears in extended programming only.<br />
MANUAL FUNCTIONS<br />
The manual functions programming screens let you:<br />
Take grab samples.<br />
Calibrate sample volumes.<br />
Operate the pump manually.<br />
Move the distributor.<br />
Grab samples and calibrate volumes are discussed in Chapter 3.<br />
OPERATING THE PUMP<br />
You can manually operate the sampler’s pump in the forward or<br />
reverse direction. You can do this to test the pump, draw a large<br />
sample, or purge the suction line.<br />
When you run the pump manually, the sampler reports the number<br />
of pump counts during the pump’s operation. Use this feature<br />
to obtain an estimate of the pump counts required to purge a<br />
nonstandard suction line.<br />
MOVING THE DISTRIBUTOR ARM<br />
The sampler lets you reposition the distributor arm. Use this feature<br />
to verify a bottle location when installing a bottle kit. You<br />
cannot move the distributor while the sampler runs a program.<br />
Always use the steps shown in the margin.<br />
DO NOT ROTATE THE DISTRIBUTOR ARM MANUALLY; THIS<br />
WILL SEVERELY DAMAGE THE DISTRIBUTOR DRIVE GEARS.<br />
PROGRAMMING STYLE<br />
The sampler has two different styles of programming screens;<br />
NORMAL and QUICK VIEW/ CHANGE.<br />
The NORMAL programming style steps you through each programming<br />
step. You simply answer each question as it is asked.<br />
The standard programming mode defaults to NORMAL.<br />
92<br />
CAUTION