Download pdf Brochure - James G. Murphy Co.

Stud Stackers
AUCTION STARTS AT 9AM
GILLINGHAM BEST 8’ hydraulic/mechanical over end sticker stacker w/15 hp hydraulic unit, (3) 60” lumber lowering
arms, side press, (2) stick magazines, (3) placer arms, 8’ 2-strand 81X feed thru transfer w/even end wheels, 29’
2-strand 81X infeed w/SKK, 5’ & 20’ 2-strand H78 transfers w/SKK, RELIANCE SHARK XS series PLC
MOORE 9’ hydraulic/mechanical over end stud stacker w/10 hp hydraulic unit, 4’ lumber lowering rollcases, (2) lumber
placing arms, 8’ 2-strand infeed transfer, 7’ lumber unscrambler, 18’ powered outfeed rollcase w/(8) 8-1/2”x53-1/2” rolls,
gearhead motors
MOORE 8’ mechanical over end stud stacker w/(2) 60” lumber lowering arms, (2) lumber placing arms, 8’ 2-strand 81X
infeed transfer, 6’ lumber unscrambler, 20’ powered outfeed rollcase w/(6) 8-1/2”x59” rolls, gearhead motors
MOORE 9’ mechanical over end stacker w/(2) 4’ lumber lowering arms, (2) lumber placing arms, 10-1/2’ 2-strand infeed
w/SKK, 42’ 2-strand H78 infeed transfer w/even end chain, gearhead motors
Planer – Pineapple – Bridge – Slowdown Belt – Breakdown Hoist
COASTAL 4”x9” steel frame stud planer, (4) heads, (16) knives, 50 hp heads, hydraulic feed rolls, 8” max width, 2” min
width, 6” max thickness, 1” min thickness, FAC hydraulic unit w/(3) 50 hp pumps, 350 gallon reservoir, spider, controls &
electrics, s/n: 409-40-0-40-86, spare heads, jointer bars, roller nose bar, spare parts
STETSON ROSS 14’ hydraulic dual pineapple feed table w/speed-up roll, (4) 10-1/2”x14” canted rolls, infeed transfer,
right hand trim saw, spare pineapple roll
4’ hydraulic live bridge w/(2) 10-1/2”x14” rolls
30”x10’ slow down belt w/gearhead motor
9’ hydraulic operated breakdown hoist w/4’ arms, SAS 15 hp, 75 gallon hydraulic unit
Bander
SIGNODE M22VC243420 hydraulic bander, 4’x4’ package, 53” W x 50” H opening, 3/4” x .020 steel banding, 8’ powered
infeed rollcase w/6-1/2”x58” rolls, (3) powered outfeed rolls w/gearhead motor, (3) GRACO paint pumps
Hog – Chippers – Screen
KOCKUMS 45 bark hammer hog, GE 150 hp/875 rpm, infeed breaker roll, 3-5/8”x7”, 45 lb hammers w/2-7/8” pins, 1” disc
& liner thickness, 22-26 TPH, 13,500 lbs, s/n: 45BH710
PRECISION 84-25, 84” 6-knife whole log chipper, EM 800hp/514 rpm/2300 volt, horizontal feed, bottom discharge, spout,
s/n: C-1224
SODERHAMN 72” 6-knife chipper, ALLIS CHALMERS 250 hp/1180 rpm, horizontal feed, bottom discharge
KOCKUMS KS1010, 10’x10’ 3-deck chip screen, 7.5 hp
James G. Murphy Inc.
Commercial & Industrial Auctioneers
murphyauction.com
425.486.1246 • 503.463.4444
800.426.3008