INSTRUCTION BOOK - Janome

More documents

Recommendations

Info

• Overcasting • Triple Stitch Guide Edge of fabric Machine Setting Stitch Length Here’s How C: Overedge Foot Place the fabric under the presser foot so that the stitches are made over the edge. NOTE: When using stretch knit fabric, use a blue tip needle, which effectively prevents skipped stitches. or Machine Setting Stitch Length S. S. A: Zigzag Foot This stitch is formed with two stitches forward and one stitch backward. Because of this, the seam is very strong and cannot be ripped out easily. Garments should be basted for fitting before using this stitch. 17
• Blind Hemming 18 or Wrong side of fabric Machine Setting 0.4 to 0.7 cm (5/32 to 9/32˝) Stitch Length 1 ~ 3 Wrong side of fabric Light weight fabric Heavy weight fabric G: Blind Stitch Foot 0.4 to 0.7 cm (5/32 to 9/32˝) On heavy weight fabrics that ravel, the raw edge should be overcast first. On lightweight fabrics the raw edge can be turned under and pressed. Fold the hem the desired amount and pin in place. Fold hem under the fabric as illustrated. q When the needle comes to the left. When the needle comes to the right. q Position the fabric on the machine so that the needle just pierces the folded edge of the fabric when the needle comes over to the extreme left side. Lower the presser foot. w Guide screw Sliding guide w Turn the guide screw and move the sliding guide against the folded edge. Sew the folded edge guiding along the sliding guide. Needle Guide screw Sliding guide
Page 1 and 2: INSTRUCTION BOOK MODEL 712T
Page 3 and 4: • Names of Parts 2 1. 2. 3. 4. 5.
Page 5 and 6: • How to Install the Spool Pin
Page 7 and 8: • Changing Needles 6 Needle clamp
Page 9 and 10: • Removing the Bobbin • Setting
Page 11 and 12: • Inserting the Bobbin q w 10 q P
Page 13 and 14: • Drawing up Bobbin Thread • Ba
Page 15 and 16: • Dropping the Feed Dogs 14 To dr
Page 17: 16 qw e q For fastening the end of
Page 21 and 22: u i 20 u Set the pattern selector d
Page 23 and 24: Attach the zipper foot with the pin
Page 25 and 26: • Rolled Hem 24 Machine Setting S
Page 27 and 28: t 26 r Brush off the lint on the fe
Page 29 and 30: • Troubleshooting 28 Condition Th
Page 31 and 32: 749-800-011 (E-N) Printed in Taiwan

INSTRUCTION BOOK - Janome

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?