InnoDisk FiD 2.5â SATA25000
InnoDisk FiD 2.5â SATA25000
InnoDisk FiD 2.5â SATA25000
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
measurement interval under stated conditions.<br />
4.4 Endurance<br />
Table 2: <strong>InnoDisk</strong> <strong>FiD</strong> 2.5” SATA 25000 MTBF<br />
<strong>InnoDisk</strong> <strong>FiD</strong> 2.5” <strong>SATA25000</strong> for SLC Solution<br />
Product Condition MTBF (Hours)<br />
<strong>InnoDisk</strong> <strong>FiD</strong> 2.5” SATA 25000 Telcordia SR-332 GB, 25°C >4,000,000<br />
Read Cycles: Unlimited Read Cycles.<br />
Data Retention: 10 years.<br />
Wear-Leveling Algorithm: Support.<br />
Bad Blocks Management: Support<br />
Error Correct Code: Support<br />
4.5 Transfer Mode<br />
<strong>InnoDisk</strong> <strong>FiD</strong> 2.5” SATA 25000 support following transfer mode:<br />
PIO Mode 0~4<br />
Ultra DMA 0~6<br />
Serial ATA I 1.5Gbps<br />
Serial ATA II 3.0Gbps<br />
4.6 Pin Assignment<br />
<strong>InnoDisk</strong> <strong>FiD</strong> 2.5” SATA 25000 uses a standard SATA pin-out. See Table 3 for <strong>InnoDisk</strong> <strong>FiD</strong> 2.5” SATA 25000<br />
pin assignments.<br />
Table 3: <strong>InnoDisk</strong> <strong>FiD</strong> 2.5” SATA 25000 Pin Assignment<br />
Name Type Description<br />
S1 GND NA<br />
S2 A+<br />
S3 A-<br />
S4 GND NA<br />
S5 B-<br />
S6 B+<br />
S7 GND NA<br />
Differential Signal Pair A<br />
Differential Signal Pair B<br />
Key and Spacing separate signal and power segments<br />
P1 NC NA<br />
P2 NC NA<br />
P3 NC NA<br />
P4 GND NA<br />
P5 GND NA<br />
14 Rev. 1.3 Datasheet, May..2011
Change language