Enabler-G AT Command Set - SE Spezial-Electronic AG

AT Command Set Reference
Version 1.08
2.4.2.11. AT+CSNS Single Numbering Scheme
Command Function This command selects the bearer or
teleservice to be used when mobile
terminated single numbering scheme call is
established. Parameter values set with
+CBST command shall be used when
equals to a data service. If
+CBST parameter is set to a value that is
not applicable to single numbering calls,
ME/TA shall map the value to the closest
valid one. E.g. if user has set =71,
=0 and =1 (non-transparent
asynchronous 9600 bps V.110 ISDN
connection) for mobile originated calls,
ME/TA shall map the values into nontransparent
asynchronous 9600 bps V.32
modem connection when single numbering
scheme call is answered.
Command Functional Call Control
Group
Command Format Query AT+CSNS=?
Response +CSNS: (0-7)
OK
Write Format AT+CSNS =
Response OK
Read Format AT+CSNS?
Response +CSNS: 0
OK
Execution Format N/A
Response N/A
GSM0107PB001MAN Page 31 of 370 1.08 – 25 January 2007