Enabler-G AT Command Set - SE Spezial-Electronic AG

AT Command Set Reference
Version 1.08
2.4.2.3. ATD> Originate Call Using Phonebook Memory
Command Function This command is used to setup an
outbound voice or data call from a specific
phonebook location.
Command Functional Call Control
Group
Command Format Query ATD?
Response ATD
Write Format N/A
Response N/A
Read Format N/A
Response N/A
Execution Format ATD>SD12I;
Response NO DIALTONE or
NO CARRIER or
CONNECT or
BUSY or
OK
Parameter Values
Phonebook Location
Storage location number in selected
phonebook
GSM Modifier Characters
I = Restrict CLI, i = Allow CLI
Semicolon after dialing string or modifier
forces TA into command mode after
successful completion.
Reference GSM Ref. 07.07 Chapter 6.3
Standard Scope Mandatory
Enfora Implementation Scope Full
GSM0107PB001MAN Page 17 of 370 1.08 – 25 January 2007