AT+i Programmer's Manual - SE Spezial-Electronic AG

More documents

Recommendations

Info

-or- SerialNET Mode Initiation I/OFFLINE After successfully activating SerialNET Auto-Link mode (!) or Deferred Connection mode (@) with LAN communications, and a LAN link is not detected at the time that iChip enters the new mode. Note: To terminate SerialNET mode, issue the ESC sequence or power-cycle the iChip with the MDSEL signal held low. After exiting SerialNET mode, iChip returns to normal AT+i command mode. AT+i Programmer‘s Manual Version 8.21 9-2
10 Web Server Interface 10.1 +iWWW — Activate Embedded Web Server Syntax: AT+iWWW[:n] Activates iChip‘s internal web server. Web Server Interface Parameters: =Web browser backlog. n represents the number of browsers that can connect to iChip‘s internal web server simultaneously at any given time. Command Options: =1..3 Default: =1 Returns: I/() where, is the iChip local IP address. Note: If the web server is already open, then I/() is returned without any action taken. In a dial-up environment, iChip goes online and the is assigned dynamically by the ISP. In an LAN environment, the IP address is assigned by a DHCP server or configured by the DIP parameter. I/ERROR If connection to the Internet failed. AT+i Programmer‘s Manual Version 8.21 10-1
Page 1 and 2: Pub. No. 20-5000-08_21, January 200
Page 3 and 4: Revision History 20-5000-08_21 Revi
Page 5 and 6: Contents 10.1 +IWWW — ACTIVATE EM
Page 7 and 8: Contents 25.3 HEADER PARAMETER NAME
Page 9 and 10: Contents 33.4.5 +iRDL — Number of
Page 11 and 12: Contents 33.17.2 +iDSLT — DHCP Se
Page 13 and 14: Tables Tables Table 2-1 AT+i Comman
Page 15 and 16: AT+i Command Set If a syntax error
Page 17 and 18: 2 General Format AT+i[[ | #UFn]…]
Page 19 and 20: General Format Command Function Par
Page 21 and 22: General Format Command Function Par
Page 23 and 24: AT+i Result Code Summary 85 RESERVE
Page 25 and 26: 4 Report Status 4.1 +iRPi — Repor
Page 27 and 28: Report Option Format 10 I/(, , , )
Page 29 and 30: 5 Connection 5.1 +iBDRA — Forces
Page 31 and 32: 5.3 +iTUP — Triggered Internet Se
Page 33 and 34: 5.4 +iDOWN — Terminate Internet S
Page 35 and 36: 6 E-mail Send Commands E-mail Send
Page 37 and 38: Notes: E-mail Send Commands I/OK If
Page 39 and 40: 7 E-Mail Retrieve 7.1 +iRML — Ret
Page 41 and 42: 7.3 +iRMM — Retrieve Mail Message
Page 43 and 44: E-Mail Receive (RMM) Flow Diagram I
Page 45 and 46: -or- specified. HTTP Client Interfa
Page 47: 9 SerialNET Mode Initiation 9.1 +iS
Page 51 and 52: 11 File Transfer Protocol (FTP) 11.
Page 53 and 54: 11.3 +iFDNL — FTP Directory Names
Page 55 and 56: 11.5 +iFCWD — FTP Change Working
Page 57 and 58: 11.7 +iFRCV — FTP Receive File Sy
Page 59 and 60: 11.9 +iFAPN — FTP Open File for A
Page 61 and 62: 11.11 +iFCLF — FTP Close File Syn
Page 63 and 64: 11.13 +iFCLS — FTP Close Session
Page 65 and 66: 12.2 +iTRCV — Telnet Receive Data
Page 67 and 68: 12.4 +iTBSN[%] — Telnet Send A By
Page 69 and 70: 12.6 +iTCLS — Telnet Close Sessio
Page 71 and 72: 13.2 +iSUDP — Open A Connectionle
Page 73 and 74: Direct Socket Interface 13.4 +iLSST
Page 75 and 76: 13.6 +iSCS — Get A Socket Connect
Page 77 and 78: Result Code: Direct Socket Interfac
Page 79 and 80: Direct Socket Interface I/ERROR If
Page 81 and 82: 13.10 +iSDMP — Dump Socket Buffer
Page 83 and 84: 13.12 +iSCLS — Close Socket Synta
Page 85 and 86: 15 Wireless LAN Mode Wireless LAN M
Page 87 and 88: 16 IP Registration IP Registration
Page 89 and 90: 17 DHCP Client DHCP Client A DHCP c
Page 91 and 92: 19 Ad-Hoc Networks Ad-Hoc Networks
Page 93 and 94: 20 Secure Socket Protocol Secure So
Page 95 and 96: Secure Socket Protocol When the AT+
Page 97 and 98: 20.6 +i[@]FOPS — Secure FTP Open
Page 99 and 100:
22 MIME Encapsulated E-Mail Message
Page 101 and 102:
22.3 MIME-Encapsulated E-Mail Messa
Page 103 and 104:
The control characters are defined
Page 105 and 106:
23.3 Software Flow Control During A
Page 107 and 108:
23.5 Host iChip Hardware Flow Cont
Page 109 and 110:
Remote Firmware Update 2. If the do
Page 111 and 112:
25 iChip Parameter Update 25.1 Intr
Page 113 and 114:
25.4 Uploading A Parameters Update
Page 115 and 116:
26.3 Web Server Modes Two web serve
Page 117 and 118:
26.7 Host Interaction Mode iChip Em
Page 119 and 120:
~headline~ iChip Embedded Web Ser
Page 121 and 122:
iChip Embedded Web Server Tags. Thi
Page 123 and 124:
27.3 RAS Theory of Operation iChip
Page 125 and 126:
28 SerialNET Theory of Operation 28
Page 127 and 128:
SerialNET Theory of Operation bytes
Page 129 and 130:
SerialNET Theory of Operation If th
Page 131 and 132:
Accumulate Quiet Time 29.5 FTP Rece
Page 133 and 134:
Secure Socket Protocol Theory of Op
Page 135 and 136:
[ CA_default_policy ] commonName =
Page 137 and 138:
Secure Socket Protocol Theory of Op
Page 139 and 140:
Remote AT+i Service iChip LAN will
Page 141 and 142:
Nonvolatile Parameter Database Para
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
33.3 Operational Parameters 33.3.1
Page 149 and 150:
33.3.3 +iMIS — Modem Initializati
Page 151 and 152:
2. AT+iMIS=‖ 3. AT+iBDRF=3 4. AT+
Page 153 and 154:
33.3.6 +iTTO — TCP Timeout Syntax
Page 155 and 156:
33.3.8 +iMPS — Max PPP Packet Siz
Page 157 and 158:
Nonvolatile Parameter Database 33.3
Page 159 and 160:
Page 161 and 162:
33.3.14 +iFLW — Set Flow Control
Page 163 and 164:
33.3.16 +iPSE — Set Power Save Mo
Page 165 and 166:
33.3.18 +iDF — IP Protocol ‘Don
Page 167 and 168:
33.4 ISP Connection Parameters 33.4
Page 169 and 170:
33.4.3 +iUSRN — Define Connection
Page 171 and 172:
33.4.5 +iRDL — Number of Times to
Page 173 and 174:
33.5 Server Profile Parameters 33.5
Page 175 and 176:
33.5.3 +iSMTP — Define SMTP Serve
Page 177 and 178:
Page 179 and 180:
33.5.7 +iPOP3 — Define POP3 Serve
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
33.7 Email Format Parameters Nonvol
Page 191 and 192:
Page 193 and 194:
33.7.4 +iDELF — Email Delete Filt
Page 195 and 196:
33.7.6 +iTOA — Define Primary Add
Page 197 and 198:
33.7.8 +iREA — Return Email Addre
Page 199 and 200:
33.7.10 +iCCn — Define Alternate
Page 201 and 202:
33.7.12 +iMST — Media Subtype Str
Page 203 and 204:
33.8 HTTP Parameters Nonvolatile Pa
Page 205 and 206:
Page 207 and 208:
33.9 RAS Server Parameters Nonvolat
Page 209 and 210:
33.9.3 +iRAP — Password for RAS A
Page 211 and 212:
33.10.2 +iDIP — iChip Default IP
Page 213 and 214:
33.10.4 +iIPG — IP Address of the
Page 215 and 216:
33.11 Wireless LAN Parameters 33.11
Page 217 and 218:
33.11.3 +iWLWM — Wireless LAN WEP
Page 219 and 220:
33.11.5 +iWLKn — Wireless LAN WEP
Page 221 and 222:
33.11.7 +iWLPP — Personal Shared
Page 223 and 224:
33.12 IP Registration Parameters No
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
33.16 Secure Socket Protocol Parame
Page 251 and 252:
33.16.3 +iCERT — Define SSL3/TLS1
Page 253 and 254:
33.17 DHCP Server Parameters Nonvol
Page 255 and 256:
34 Appendix A 34.1 MIME content typ
Page 257 and 258:
Type Subtype image jpeg gif ief g3f
Page 259 and 260:
MT=0 MST=‖text-plain‖ # CONNECT
Page 261 and 262:
37 Index +i!RP11 - Ad-Hoc Network R
Page 263:
Header Parameter Names and Values .
show all

AT+i Programmer's Manual - SE Spezial-Electronic AG

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?